Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

A Fe3O4‐Based Chemical Sensor for Cathodic Determination of Hydrogen Peroxide

A new cathodic scheme for hydrogen peroxide (H₂O₂) measurement by Fe₃O₄‐based chemical sensor was described. The unique characteristic of electrocatalytic property was firstly investigated by voltammetry. And then the amperometric response of H₂O₂ was measured at ?0.2 V (vs. Ag/AgCl) by Fe₃O₄ modified glassy carbon rotating disk electrode. The kinetic parameter was also calculated from Koutecky‐Levich plot, and the value was 6.4×10^?4 cm s^?1 in pH 3 citrate buffer. In order to benefit the possible biomedical applications, Fe₃O₄/chitosan modified electrode was also investigated in this experiment. There were several characteristic enhancements by the coated chitosan thin film for H₂O₂ sensor. The calibration curves were found to be linear up to 4.0 and 5.0 mM (r=0.999) in pH 3 and 7 with the detection limits of 7.6 and 7.4 μM L^?1 (S/N=3). The stability was evaluated by the results of half‐life time (t_50%) for 9 months at room temperature and 24 months at 4 °C.     

Fe3O4@SiO2‐PANI‐Au Nanocomposite Prepared for Electrochemical Determination of Quercetin in Food Samples and Biological Fluids

A new electrochemical sensor based on Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was fabricated for modification of glassy carbon electrode (Fe₃O₄@SiO₂‐PANI‐Au GCE). The Fe₃O₄@SiO₂‐PANI‐Au nanocomposite was characterized by TEM, FESEM‐EDS‐Mapping, XRD, and TGA methods. The Fe₃O₄@SiO₂‐PANI‐Au GC electrode exhibited an acceptable sensitivity, fast electrochemical response, and good selectivity for determination of quercetin. Under optimal conditions, the linear range for quercetin concentrations using this sensor was 1.0×10^?8 to 1.5×10^?5 mol L^?1, and the limit of detection was 3.8×10^?9 mol L^?1. The results illustrated that the offered sensor could be a possible alternative for the measurement of quercetin in food samples and biological fluids.     

MOF‐Derived Spinel NiCo2O4 Hollow Nanocages for the Construction of Non‐enzymatic Electrochemical Glucose Sensor

Non‐enzymatic glucose sensor is greatly expected to take over its enzymatic counterpart in the future. In this paper, we reported on a facile strategy to construct a non‐enzymatic glucose sensor by use of NiCo₂O₄ hollow nanocages (NiCo₂O₄ HNCs) as catalyst, which was derived from Co‐based zeolite imidazole frame (ZIF‐67). The NiCo₂O₄ HNCs modified glassy carbon electrode (NiCo₂O₄ HNCs/GCE), the key component of the glucose sensor, showed highly electrochemical catalytic activity towards the oxidation of glucose in alkaline media. As a result, the proposed non‐enzymatic glucose sensor afforded excellent analytical performances assessed with the aid of cyclic voltammetry and amperometry (i–t). A wide linear range spanning from 0.18 μΜ to 5.1 mM was achieved at the NiCo₂O₄ HNCs/GCE with a high sensitivity of 1306 μA mM^?1 cm^?2 and a fast response time of 1 s. The calculated limit of detection (LOD) of the sensor was as low as 27 nM (S/N=3). Furthermore, it was demonstrated that the non‐enzymatic glucose sensor showed considerable anti‐interference ability and excellent stability. The practical application of the sensor was also evaluated by determination of glucose levels in real serum samples.     

Nitrogen‐doped Hollow Co3O4 Nanofibers for both Solid‐state pH Sensing and Improved Non‐enzymatic Glucose Sensing

Nitrogen‐doped hollow cobalt oxide nanofibers (Co₃O₄ NFs) with both glucose catalytic activity and pH sensitivity were fabricated through core‐sheath electrospinning technique, followed by calcination. The as‐developed nitrogen‐doped hollow Co₃O₄ NFs were thoroughly characterized using various techniques, and then employed to fabricate a dual electrochemical sensor for both pH sensing and glucose sensing. The pH sensitivity of the developed nitrogen‐doped hollow Co₃O₄ NFs demonstrated a Nernst constant of 12.9–15.9 mV/pH in the pH range of 3.0～9.0 and 6.8–10.7 mV/pH in the pH range of 9.0～13.0, respectively. The developed hollow cobalt oxides nanofibers sensor also possesses glucose sensitivity of 87.67 μA mM^?1 cm^?2, the limit of detection of 0.38 μM (S/N=3), and an acceptable selectivity against several common interferents in non‐enzymatic glucose determination. High accuracy for monitoring glucose in human serum sample was also demonstrated. These features indicate that the as‐synthesized nitrogen‐doped hollow cobalt oxides nanofibers hold great potential in the development of a unique dual sensor for both solid‐state pH sensing and superior non‐enzymatic glucose sensing.     

α‐Fe2O3 Cubes with High Visible‐Light‐Activated Photoelectrochemical Activity towards Glucose: Hydrothermal Synthesis Assisted by a Hydrophobic Ionic Liquid

A liquid/liquid interfacial reaction system was designed to fabricate α‐Fe₂O₃ cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C₈H₁₇)₂(CH₃)₂N]FeCl₄) for manufacturing α‐Fe₂O₃ cubes by a novel and environmentally friendly hydrothermal method under low‐temperature conditions (140 °C). The iron‐containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α‐Fe₂O₃ cubes. Nanomaterials synthesized from hydrophobic iron‐containing ionic liquids show good crystallinity, well‐developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α‐Fe₂O₃ was investigated in detail. [(C₈H₁₇)₂(CH₃)₂N]FeCl₄ is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α‐Fe₂O₃ cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α‐Fe₂O₃ cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as‐prepared α‐Fe₂O₃ cubes. The photocurrent response of an α‐Fe₂O₃ cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors.     

Disposable Amperometric Biosensor Based on Poly‐L‐lysine and Fe3O4 NPs‐chitosan Composite for the Detection of Tyramine in Cheese

An amperometric tyramine biosensor based on poly‐L‐lysine (PLL) and Fe₃O₄ nanoparticles (Fe₃O₄NP) modified screen printed carbon electrode (SPCE) was developed. PLL was formed on the SPCE by the electropolymerization of L‐lysine. Subsequently, Fe₃O₄NP suspension prepared in chitosan (CH) solution was casted onto the PLL/SPCE. Tyrosinase (Ty) enzyme was immobilized onto the modified Fe₃O₄?CH/PLL/SPCE and the electrode was coated with Nafion to fabricate the Ty/Fe₃O₄?CH/PLL/SPCE. Different techniques including scanning electron microscopy, chronoamperometry (i–t curve), cyclic voltammetry and electrochemical impedance spectroscopy were utilized to study the fabrication processes, electrochemical characteristics and performance parameters of the biosensor. The analytical performance of the tyramine biosensor was evaluated with respect to linear range, sensitivity, limit of detection, repeatability and reproducibility. The response of the biosensor to tyramine was linear between 4.9×10^?7–6.3×10^?5 M with a detection limit of 7.5×10^?8 M and sensitivity of 71.36 μA mM^?1 (595 μA mM^?1 cm^?2). The application of the developed biosensor for the determination of tyramine was successfully tested in cheese sample and mean analytical recovery of added tyramine in cheese extract was calculated as 101.2±2.1 %. The presented tyramine biosensor is a promising approach for tyramine analysis in real samples due to its high sensitivity, rapid response and easy fabrication.     

Photoelectrochemical‐assisted Batch Injection Analysis (PEC‐BIA) of Glucose Exploiting Visible LED Light as an Excitation Source

This work describes the development of a novel method for glucose determination exploiting a photoelectrochemical‐assisted batch injection analysis cell designed and constructed with the aid of 3D printer technology. The PEC‐BIA cell was coupled to a LED lamp in order to control the incidence of light on the Cu₂O/Ni(OH)₂/FTO photoelectroactive platform. The electrochemical characteristics of Cu₂O/Ni(OH)₂/FTO photoelectroactive platform were evaluated by cyclic voltammetry, amperometry, and electrochemical impedance spectroscopy. The PEC‐BIA cell presented linear response range, limit of detection based on a signal‐to‐noise ratio of three, and sensitivity of 1–1000 μmol L^?1, 0.76 μmol L^?1 and 0.578 μA L μmol^?1, respectively. The PEC‐BIA method presented a mean value of the recovery values of 97.0 % to 102.0 % when it was applied to glucose determination in artificial blood plasma samples which indicates the promising performance of the proposed system to determine glucose.     

Detection of Dexamethasone Sodium Phosphate in Blood Plasma: Application of Hematite in Electrochemical Sensors

We studied sensor application of a graphene oxide and hematite (α‐Fe₂O₃/GO) composite electrode well‐characterized by the SEM and XRD. Through differential pulse voltammetry (DPV), oxidation of dexamethasone sodium phosphate (DSP) was studied at the surface of a glassy carbon electrode (GCE) modified with graphene oxide nanosheets (GO) and the α‐Fe₂O₃/GO composite. The values of the transfer coefficient (α) and the diffusion coefficient (D) of DSP were 0.5961 and 4.71×10^?5 cm² s^?1 respectively. In the linear range of 0.1–50 μM, the detection limit (DL) was 0.076 μM. In the second step, a GCE was modified with α‐Fe₂O₃/GO composite and the DSP measurement step was repeated to analyzed and compare the effects of hematite nanoparticles present on graphene oxide surfaces. According to the results, α and D were 0.52 and 2.406×10^?4 cm² s^?1 respectively and the DL was 0.046 μM in the linear range of 0.1–10.0 μM. The sensor is simple, inexpensive and uses blood serum.     

Magnetite Nanorods Stabilized by Polyaniline/Reduced Graphene Oxide as a Sensing Platform for Selective and Sensitive Non‐enzymatic Hydrogen Peroxide Detection

In this study, magnetite nanorods stabilized on polyaniline/reduced graphene oxide (Fe₃O₄@PANI/rGO) was synthesized via a wet‐reflux strategy. The possible formation of Fe₃O₄@PANI/rGO was morphologically and structurally verified by field emission scanning electron microscopy (FE‐SEM), Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). Furthermore, the thermal stability of Fe₃O₄@PANI/rGO was measured by a thermogravimetric analyzer (TGA); the composite had good thermal stability owing to the ceramic nature of Fe₃O₄. The Fe₃O₄@PANI/rGO has been applied as a potential sensing platform for electrochemical detection of hydrogen peroxide (H₂O₂). By the combined efforts of extended active surface area, active carbon support, more catalytic active sites and high electrical conductivity, the Fe₃O₄@PANI/rGO exhibited an improved performance toward the non‐enzymatic detection of H₂O₂ in 0.5 M KOH with a fast response time (5 s), high sensitivity (223.7 μA mM^?1 cm^?2), low limit of detection (4.45 μM) and wide linear range (100 μM–1.5 mM). Furthermore, the fabricated sensor exhibited excellent recovery rates (94.2–104.0 %) during real sample analysis.     

Sensitive and Selective Sensing of Hydrogen Peroxide with Iron‐Tetrasulfophthalocyanine‐Graphene‐Nafion Modified Screen‐Printed Electrode

We developed a novel iron‐tetrasulfophthalocyanine‐graphene‐Nafion (FeTSPc‐GR‐Nafion) modified screen‐printed electrode to determine hydrogen peroxide (H₂O₂) with high sensitivity and selectivity. The nanocomposite film (FeTSPc‐GR‐Nafion) exhibits an excellent electrocatalytic activity towards oxidation of H₂O₂ at a potential of +0.35 V in the absence of enzyme. A comparative study reveals that the FeTSPc‐GR complexes play a dual amplification role. Amperometric experiment indicates that the sensors possess good sensitivity and selectivity, with a linear range from 2.0×10^?7 M to 5.0×10^?3 M and a detection limit of 8.0×10^?8 M. This sensor has been successfully used to develop the glucose biosensor and has also been applied to determine H₂O₂ in sterile water.     

Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Green one‐pot preparation of α‐Fe2O3@carboxyl‐functionalized yeast composite with high adsorption and catalysis properties for removal of methylene blue

Herein, the α‐Fe₂O₃@carboxyl‐functionalized yeast composite (α‐F@CFYC) was synthesized by direct oxidation of yeast with K₂FeO₄ and used as a novel adsorbent/heterogeneous Fenton catalyst for removal of methylene blue (MB). The obtained α‐F@CFYC was fully characterized by scanning electron microscopy, EDX, X‐ray diffraction analysis, Fourier‐transform infrared, thermogravimetry, and X‐ray photoelectron spectroscopy, respectively, and the corresponding results showed that α‐Fe₂O₃ nanoparticles were successfully obtained and deposited on yeast surface, as well as more functional groups were introduced/exposed on yeast surface. Furthermore, various influence parameters (eg, contact time, initial pH, and MB concentration) on the adsorption/catalysis ability of α‐F@CFYC for MB have been investigated in detail under ambient conditions. As a result, owing to the synergetic effect of the loaded α‐Fe₂O₃ and the introduced/exposed functional groups on yeast surface, the as‐obtained α‐F@CFYC exhibited high adsorption capacities and good catalysis degradation properties for MB.     

Immobilization of Enzymes on the Nano‐Au Film Modified Glassy Carbon Electrode for the Determination of Hydrogen Peroxide and Glucose

A new enzyme‐based amperometric biosensor for hydrogen peroxide was developed relying on the efficient immobilization of horseradish peroxidase (HRP) to a nano‐scaled particulate gold (nano‐Au) film modified glassy carbon electrode (GC). The nano‐Au film was obtained by a chitosan film which was first formed on the surface of GC. The high affinity of chitosan for nano‐Au associated with its amino groups resulted in the formation of nano‐Au film on the surface of GC. The film formed served as an intermediator to retain high efficient and stable immobilization of the enzyme. H₂O₂ was detected using hydroquinone as an electron mediator to transfer electrons between the electrode and HRP. The HRP immobilized on nano‐Au film maintained excellent electrocatalytical activity to the reduction of H₂O₂. The experimental parameters such as the operating potential of the working electrode, mediator concentration and pH of background electrolyte were optimized for best analytical performance of amperometry. The linear range of detection for H₂O₂ is from 6.1×10^?6 to 1.8×10^?3 mol L^?1 with a detection limit of 6.1 μmol L^?1 based on signal/noise=3. The proposed HRP enzyme sensor has the features of high sensitivity (0.25 Almol^?1cm^?2), fast response time (t_90%≤10 s) and a long‐term stability (>1 month). As an extension, glucose oxidase (GOD) was chemically bound to HRP‐modified electrode. A GOD/HRP bienzyme‐modified electrode formed in this way can be applied to the determination of glucose with satisfactory performance.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Surviving High‐Temperature Calcination: ZrO2‐Induced Hematite Nanotubes for Photoelectrochemical Water Oxidation

Nanotubular Fe₂O₃ is a promising photoanode material, and producing morphologies that withstand high‐temperature calcination (HTC) is urgently needed to enhance the photoelectrochemical (PEC) performance. This work describes the design and fabrication of Fe₂O₃ nanotube arrays that survive HTC for the first time. By introducing a ZrO₂ shell on hydrothermal FeOOH nanorods by atomic layer deposition, subsequent high‐temperature solid‐state reaction converts FeOOH‐ZrO₂ nanorods to ZrO₂‐induced Fe₂O₃ nanotubes (Zr‐Fe₂O₃ NTs). The structural evolution of the hematite nanotubes is systematically explored. As a result of the nanostructuring and shortened charge collection distance, the nanotube photoanode shows a greatly improved PEC water oxidation activity, exhibiting a photocurrent density of 1.5 mA cm⁻² at 1.23 V (vs. reversible hydrogen electrode, RHE), which is the highest among hematite nanotube photoanodes without co‐catalysts. Furthermore, a Co‐Pi decorated Zr‐Fe₂O₃ NT photoanode reveals an enhanced onset potential of 0.65 V (vs. RHE) and a photocurrent of 1.87 mA cm⁻² (at 1.23 V vs. RHE).     

Constructing Hierarchical Tectorum‐like α‐Fe2O3/PPy Nanoarrays on Carbon Cloth for Solid‐State Asymmetric Supercapacitors

The design of complex heterostructured electrode materials that deliver superior electrochemical performances to their individual counterparts has stimulated intensive research on configuring supercapacitors with high energy and power densities. Herein we fabricate hierarchical tectorum‐like α‐Fe₂O₃/polypyrrole (PPy) nanoarrays (T‐Fe₂O₃/PPy NAs). The 3D, and interconnected T‐Fe₂O₃/PPy NAs are successfully grown on conductive carbon cloth through an easy self‐sacrificing template and in situ vapor‐phase polymerization route under mild conditions. The electrode made of the T‐Fe₂O₃/PPy NAs exhibits a high areal capacitance of 382.4 mF cm⁻² at a current density of 0.5 mA cm⁻² and excellent reversibility. The solid‐state asymmetric supercapacitor consisting of T‐Fe₂O₃/PPy NAs and MnO₂ electrodes achieves a high energy density of 0.22 mWh cm⁻³ at a power density of 165.6 mW cm⁻³.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

3D Porous Carbon Framework Stabilized Ultra‐Uniform Nano γ‐Fe2O3: A Useful Catalyst System

We present a novel strategy for the scalable fabrication of γ‐Fe₂O₃@3DPCF, a three‐dimensional porous carbon framework (PCF) anchored ultra‐uniform and ultra‐stable γ‐Fe₂O₃ nanocatalyst. The γ‐Fe₂O₃@3DPCF nanocomposites were facilely prepared with the following route: condensation of iron(III) acetylacetonate with acetylacetonate at room temperature to form the polymer precursor (PPr), which was carbonized subsequently at 800 °C. The homogeneous aldol condensation offered an ultra‐uniform distribution of iron, so that the γ‐Fe₂O₃ nanoparticles (NPs) were uniformly distributed in the 3D carbon architecture with the average size of approximate 20 nm. The Fe₂O₃ NPs were capped with carbon, so that the iron oxide maintained its γ‐phase instead of the more stable α‐phase. The nanocomposite was an excellent catalyst for the reduction of nitroarene; it gave >99 % conversion and 100 % selectivity for the reduction of nitroarenes to the corresponding anilines at 100 °C. The fabrication of the γ‐Fe₂O₃@3DPCF nanocatalyst represents a green and scalable method for the synthesis of novel carbon‐based metal oxide nanostructures.