Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

Origin of the irreversible plateau (4.5 V) of Li[Li0.182Ni0.182Co0.091Mn0.545]O2 layered material

Layered LiNi_0.4Co_0.2Mn_0.4O₂, Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂, Li[Li_1/3Mn_2/3]O₂ powder materials were prepared by rheological phase method. XRD characterization shows that these samples all have analogous structure to LiCoO₂. Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ can be considered to be the solid solution of LiNi_0.4Co_0.2Mn_0.4O₂ and Li[Li_1/3Mn_2/3]O₂. Detailed information from XRD, ex situ XPS measurement and electrochemical analysis of these three materials reveals the origin of the irreversible plateau (4.5 V) of Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ electrode. The irreversible oxidation reaction occurred in the first charging above 4.5 V is ascribed to the contribution of Li[Li_1/3Mn_2/3]O₂ component, which maybe extract Li⁺ from the transition layer in Li[Li_1/3Mn_2/3]O₂ or Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂ through oxygen release. This step also activates Mn⁴⁺ of Li[Li_1/3Mn_2/3]O₂ or Li[Li_0.182Ni_0.182Co_0.091Mn_0.545]O₂, it can be reversibly reduced/oxidized between Mn⁴⁺ and Mn³⁺ in the subsequent cycles.     

High-capacity Li(Ni0.5Co0.2Mn0.3)O2 lithium-ion battery cathode synthesized using a green chelating agent

Quasi-spherical (Ni_0.5Co_0.2Mn_0.3)(OH)₂ precursor is prepared via a continuous hydroxide co-precipitation method using sodium lactate as the green chelating agent. A layered structure Li(Ni_0.5Co_0.2Mn_0.3)O₂ is synthesized by calcining the mixture of as-prepared precursor and Li₂CO₃ in air. X-ray photoelectron spectroscopy (XPS) indicates that Ni, Co, and Mn exist in the oxidation states of +2/+3, +3 and +4, respectively. The influence of calcination temperature on the structural, morphological, electrochemical properties of Li(Ni_0.5Co_0.2Mn_0.3)O₂ oxides are investigated in detail. As a result, the sample calcined at 850 °C shows excellent electrochemical performance, which could be ascribed to its good crystal structure, low cation disorder, appropriate crystallinity. This sample delivers an initial discharge capacity of 192.6 mA h g^?1 with a coulombic efficiency of 89.5 % at a current density of 20 mA g^?1, and exhibits good rate capability and stable cyclability. Finally, the electrochemical performance of the sodium lactate-derived sample is briefly compared with those of the oxalic acid-derived and ammonia-derived oxide.     

Coating of Al2O3 on layered Li(Mn1/3Ni1/3Co1/3)O2 using CO2 as green precipitant and their improved electrochemical performance for lithium ion batteries

Li(Mn_1/3Ni_1/3Co_1/3)O₂ cathode materials were fabricated by a hydroxide precursor method. Al₂O₃ was coated on the surface of the Li(Mn_1/3Ni_1/3Co_1/3)O₂ through a simple and effective one-step electrostatic self-assembly method. In the coating process, a NHCO₃-H₂CO₃ buffer was formed spontaneously when CO₂ was introduced into the NaAlO₂ solution. Compared with bare Li(Mn_1/3M_1/3Co_1/3)O₂, the surface-modified samples exhibited better cycling performance, rate capability and rate capability retention. The Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ electrodes delivered a discharge capacity of about 115 mAh·g^?1 at 2 A·g^?1, but only 84 mAh·g^?1 for the bare one. The capacity retention of the Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ was 90.7% after 50 cycles, about 30% higher than that of the pristine one.     

Binderless Solution Processed Zn Doped Co3O4 Film on FTO for Rapid and Selective Non‐enzymatic Glucose Detection

A simple solution based deposition process has been used to fabricate Zn doped Co₃O₄ electrode as an electrocatalyst for non‐enzymatic oxidation of glucose. XRD, HRTEM, SEM, EELS, AFM, EIS was used to characterise the electrode. The addition of Zn as dopant on Co₃O₄ resulted in enhanced electrochemical performance of Zn:Co₃O₄ material compared to pristine Co₃O₄ due to increased charge transferability. The as prepared electrode showed fast response (<7 s) time, good sensitivity (193 μA mM⁻¹ cm⁻²) in the linear range of 5 μM–0.62 mM, good selectivity towards glucose at a relatively lower applied potential of +0.52 V in 0.1 M NaOH solution. A detection limit of ∼2 μM was measured for the Zn:Co₃O₄ electrode. The applied fabrication method resulted in good inter and intra electrode reproducibility as was shown by the lower relative standard deviation values (R.S.D). The electrode retained 70 % of initial current response after 30 days. Although the as prepared Zn:Co₃O₄ electrodes did not result in highest reported sensitivity, and lowest limit of detection; the ease of fabrication and scalability of production, good inter and intra electrode reproducibility makes it a potential candidate for commercial application as glucose sensor.     

Improved electrochemical performance of LiNi0.5Mn1.5O4 as cathode of lithium ion battery by Co and Cr co-doping

Three samples, LiNi_0.5Mn_1.5O₄, LiNi_0.4Mn_1.4Co_0.2O₄, and LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ exhibits an improved performance compared with the Co-doped sample LiNi_0.4Mn_1.4Co_0.2O₄ and the undoped sample LiNi_0.5Mn_1.5O₄, especially at elevated temperature. At 25 °C, the discharge capacity of LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ is 130 mAh g^?1 at 0.1 C and 103 mAh g^?1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g^?1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi_0.4Mn_1.4Co_0.2O₄ and LiNi_0.475Mn_1.475Co_0.05O₄, the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi_0.5Mn_1.5O₄ by the co-doping was discussed.     

Verbindungen der L-Ascorbinsäure mit Metallen. IV. Ligandeigenschaften des Monoanions der L-Ascorbinsäure,C6H7O6−

Compounds of L-Ascorbic Acid with Metals. IV. Ligand Properties of the Monoanion of L-Ascorbic Acid, C₆H₇O₆^? The ascorbates of some 3d elements of the general type M(Hasc)_n · xH₂O with M = Cr³⁺ (n = 3, x = 6), M = Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺ (n = 2, x = 4) are characterized by their hydrolytic and conductivity properties, magnetic moments, electronic and infrared spectra. The results of the coordination chemical investigations allow to determine the position of the Hasc^? ligand in the spectrochemical and nephelauxetic ligand series, and suggest the ligand to be bidentate.     

Poly[[diaquamanganese(II)]‐μ3‐4‐oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylato‐κ4O4,O5:O2:O2]

In the title compound, [Mn(C₅H₂N₂O₄)(H₂O)₂]_n, the Mn^II ion has a distorted octahedral geometry and the 4‐oxido‐2‐oxo‐1,2‐dihydropyrimidine‐5‐carboxylate (Hiso²⁻) anion acts as a μ₃:η⁴‐bridging ligand. Two oxo O atoms from different Hiso²⁻ ligands bridge two Mn^II ions, forming centrosymmetric dinuclear building blocks. Each dinuclear building block interacts with another four by the coordination of the oxide groups and carboxylate O atoms, producing a two‐dimensional framework in the ab plane. Hydrogen bonds further extend the two‐dimensional sheets into a three‐dimensional supramolecular framework.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

(Croconato‐κ2O,O′)bis­(1,10‐phenanthroline‐κ2N,N′)cobalt(II), and the nickel(II) and copper(II) analogues

The title complexes, [M(C₅O₅)(C₁₂H₈N₂)₂], with M = Co^II, Ni^II and Cu^II, all lie across twofold rotation axes, around which two 1,10‐phenanthroline ligands are arranged in a chiral propeller manner. The Co^II and Ni^II complexes are isostructural, with octa­hedral coordination geometry, while the local geometry of the Cu^II complex is severely distorted from octa­hedral.     

Theoretical studies of O2−:(H2O)n clusters

The interaction of superoxide ion O₂^? with up to four water molecules [O₂^?: (H₂O)_n, n = 1, 2, 4] has been investigated using ab initio molecular orbital theory. The binding energy of O₂^?: H₂O is calculated to be ?20.6 kcal/mol in good agreement with gas phase experimental data. At the MP3/6-31G^* level the O₂^?:H₂O complex has a C_2v structure with a double (cyclic) hydrogen bond between O₂^? and H₂O. A C_s structure with a single hydrogen bond is only 0.7 kcal/mol less stable. Interaction of H₂O with the doubly occupied π^* orbital of O₂^? is preferred slightly over interaction with the singly occupied π^* orbital. Natural bond orbital analysis suggests that both electrostatic and charge transfer interactions are important in anionic complexes. The charge transfer occurs predominantly in the O₂^? → H₂O direction and is important in determining the relative stabilities of the different structures and states. Singly and doubly hydrogen-bonded structures for the O₂^?: (H₂O)₂ and O₂^?: (H₂O)₄ clusters were found to be similar in stability and the increase in binding of the cluster becomes smaller as each additional water molecule is added to the cluster.     

Tailoring Transition‐Metal Hydroxides and Oxides by Photon‐Induced Reactions

Controlled synthesis of transition‐metal hydroxides and oxides with earth‐abundant elements have attracted significant interest because of their wide applications, for example as battery electrode materials or electrocatalysts for fuel generation. Here, we report the tuning of the structure of transition‐metal hydroxides and oxides by controlling chemical reactions using an unfocused laser to irradiate the precursor solution. A Nd:YAG laser with wavelengths of 532 nm or 1064 nm was used. The Ni²⁺, Mn²⁺, and Co²⁺ ion‐containing aqueous solution undergoes photo‐induced reactions and produces hollow metal‐oxide nanospheres (Ni_0.18Mn_0.45Co_0.37O_x) or core–shell metal hydroxide nanoflowers ([Ni_0.15Mn_0.15Co_0.7(OH)₂](NO₃)_0.2?H₂O), depending on the laser wavelengths. We propose two reaction pathways, either by photo‐induced redox reaction or hydrolysis reaction, which are responsible for the formation of distinct nanostructures. The study of photon‐induced materials growth shines light on the rational design of complex nanostructures with advanced functionalities.     

Influence of preparation method on structure, morphology, and electrochemical performance of spherical Li[Ni0.5Mn0.3Co0.2]O2

Spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ was prepared by both the continuous hydroxide co-precipitation method and continuous carbonate co-precipitation method under different calcined temperatures. The physical properties and electrochemical behaviors of Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by two methods were characterized by X-ray diffraction, scanning electron microscope, and electrochemical measurements. It has been found that different preparation methods will result in the differences in the morphology (shape, particle size, and tap density), structure stability, and the electrochemical characteristics (shape of initial charge/discharge curve, cycle stability, and rate capability) of the final product Li[Ni_0.5Mn_0.3Co_0.2]O₂. The physical and electrochemical properties of the spherical Li[Ni_0.5Mn_0.3Co_0.2]O₂ prepared by continuous hydroxide co-precipitation is apparently superior to the one prepared by continuous carbonate co-precipitation method. The optimal sample prepared by continuous hydroxide co-precipitation at 820 °C exhibits a hexagonally ordered layer structure, high special discharge capacity, good capacity retention, and excellent rate capability. It delivers high initial discharge capacity of 175.2 mAh g^?1 at 0.2 C rate between 3.0 and 4.3 V, and the capacity retention of 98.8 % can be maintained after 50 cycles. While the voltage range is broadened up to 2.5 and 4.6 V vs. Li⁺/Li, the special discharge capacities at 0.2 C, 0.5 C, 1 C, 2 C, 5 C, and 10 C rates are as high as 214.3, 205.0, 198.3, 183.3, 160.1 and 135.2 mAh g^?1, respectively.     

碳酸盐共沉淀法可控制备超高倍率锂离子电池正极材料LiNi1/3Co1/3Mn1/3O2

采用碳酸盐共沉淀法通过调节NH₃·H₂O用量来实现可控制备超高倍率纳米结构LiNi_1/3Co_1/3Mn_1/3O₂正极材料。NH₃·H₂O用量会对颗粒的形貌、粒径、晶体结构以及材料电化学性能产生较大的影响。X射线衍射（XRD）分析和扫描电镜（SEM）结果表明,随着NH₃·H₂O用量的降低,一次颗粒形貌由纳米片状逐渐过渡到纳米球状,且n_NH3·H2O：（n_Ni+n_Co+n_Mn）=1：2样品晶体层状结构最完善、Li⁺/Ni²⁺阳离子混排程度最低。电化学性能测试结果也证实了n_NH3·H2O：（n_Ni+n_Co+n_Mn）=1：2样品具有最优异的循环稳定性和超高倍率性能。具体而言,在2.7~4.3 V,1C下循环300次后的放电比容量为119 mAh·g^-1,容量保持率为81%,中值电压基本无衰减（保持率为97%）。在100C（18 Ah·g^-1）的超高倍率下,放电比容量还能达到56 mAh·g^-1,具有应用于高功率型锂离子电池的前景。此NH₃·H₂O比例值对于共沉淀法制备其他高倍率、高容量的正/负极氧化物材料具有一定的工艺参考价值。     

All Organic Sodium‐Ion Batteries with Na4C8H2O6

Developing organic compounds with multifunctional groups to be used as electrode materials for rechargeable sodium‐ion batteries is very important. The organic tetrasodium salt of 2,5‐dihydroxyterephthalic acid (Na₄DHTPA; Na₄C₈H₂O₆), which was prepared through a green one‐pot method, was investigated at potential windows of 1.6–2.8 V as the positive electrode or 0.1–1.8 V as the negative electrode (vs. Na⁺/Na), each delivering compatible and stable capacities of ca. 180 mAh g^?1 with excellent cycling. A combination of electrochemical, spectroscopic and computational studies revealed that reversible uptake/removal of two Na⁺ ions is associated with the enolate groups at 1.6–2.8 V (Na₂C₈H₂O₆/Na₄C₈H₂O₆) and the carboxylate groups at 0.1–1.8 V (Na₄C₈H₂O₆/Na₆C₈H₂O₆). The use of Na₄C₈H₂O₆ as the initial active materials for both electrodes provided the first example of all‐organic rocking‐chair SIBs with an average operation voltage of 1.8 V and a practical energy density of about 65 Wh kg^?1.     

Electrochemical behavior of Li[Li0.2Co0.3Mn0.5]O2 as cathode material in Li2SO4 aqueous electrolyte

Layered, lithium-rich Li[Li_0.2Co_0.3Mn_0.5]O₂ cathode material is synthesized by reactions under autogenic pressure at elevated temperature (RAPET) method, and its electrochemical behavior is studied in 2?M Li₂SO₄ aqueous solution and compared with that in a non-aqueous electrolyte. In cyclic voltammetry (CV), Li[Li_0.2Co_0.3Mn_0.5]O₂ electrode exhibits a pair of reversible redox peaks corresponding to lithium ion intercalation and deintercalation at the safe potential window without causing the electrolysis of water. CV experiments at various scan rates revealed a linear relationship between the peak current and the square root of scan rate for all peak pairs, indicating that the lithium ion intercalation–deintercalation processes are diffusion controlled. The corresponding diffusion coefficients are found to be in the order of 10^?8?cm²?s^?1. A typical cell employing Li[Li_0.2Co_0.3Mn_0.5]O₂ as cathode and LiTi₂(PO₄)₃ as anode in 2?M Li₂SO₄ solution delivers a discharge capacity of 90?mA?h g^?1. Electrochemical impedance spectral data measured at various discharge potentials are analyzed to determine the kinetic parameters which characterize intercalation–deintercalation of lithium ions in Li[Li_0.2Co_0.3Mn_0.5]O₂ from 2?M Li₂SO₄ aqueous electrolyte.     

Simultaneous Electroanalysis of Hypochlorite and H2O2: Use of I−/I2 as a Probing Potential Buffer

Sodium hypochlorite (NaClO) and hydrogen peroxide (H₂O₂) have been simultaneously analyzed, for the first time, using a simple and rapid potentiometric method. The present method shows a high sensitivity, selectivity and satisfactory reproducibility. Pt electrode was used as an indicator electrode and the I₂/I^? redox couple was used as a probing potential buffer. The large difference in the rates of the oxidation of I^? by the two oxidizing agents, that is, the oxidation of I^? by NaClO is by several orders of magnitude faster than that by H₂O₂, enabled the selective analysis of these two species. Based on such a large difference in the rates, a momentary potential response corresponding to the oxidation of I^? by NaClO and another quite slow one by H₂O₂ could be obtained. Factors affecting the selectivity as well as the sensitivity, such as the concentrations of molybdate (used as catalyst for the oxidation of I^? by H₂O₂), H⁺, I₂, and I^? in the potential buffer were examined. The expected Nernstian responses were obtained over a considerable range of the concentrations of the two oxidizing agents with slopes of 30.5 and 29.9 mV for NaClO and H₂O₂, respectively (in a close agreement with the theoretical value, that is, 29.6 mV) and with a detection limit in the submicromolar range (0.2 μM).     

A Membraneless Glucose/O2 Biofuel Cell Based on Pd Aerogels

In this study, we introduce the first membraneless glucose/O₂ biofuel cell using Pd‐based aerogels as electrode materials. The bioanode was fabricated with a coimmobilized mediator and glucose oxidase for the oxidation of glucose, in which ferrocenecarboxylic acid was integrated into a three‐dimensional porous beta‐cyclodextrin‐modified Pd aerogel to mediate the bioelectrocatalytic reaction. Bilirubin oxidase and Pd–Pt alloy aerogel were confined to an electrode surface, which realized the direct bioelectrocatalytic function for the reduction of O₂ to H₂O with a synergetic effect at the biocathode. By employing these two bioelectrodes, the assembled glucose/O₂ biofuel cell showed a maximum power output of 20 μW cm^?2 at 0.25 V.     

Foamlike Porous Spinel MnxCo3−xO4 Material Derived from Mn3[Co(CN)6]2⋅nH2O Nanocubes: A Highly Efficient Anode Material for Lithium Batteries

A new facile strategy has been designed to fabricate spinel Mn_xCo_3?xO₄ porous nanocubes, which involves a morphology‐conserved and pyrolysis‐induced transformation of Prussian Blue Analogue Mn₃[Co(CN)₆]₂ ? nH₂O perfect nanocubes. Owing to the release of CO₂ and N_xO_y in the process of interdiffusion, this strategy can overcome to a large extent the disadvantage of the traditional ceramic route for synthesis of spinels, and Mn_xCo_3?xO₄ with foamlike porous nanostructure is effectively obtained. Importantly, when evaluated as an electrode material for lithium‐ion batteries, the foamlike Mn_xCo_3?xO₄ porous nanocubes display high specific discharge capacity and excellent rate capability. The improved electrochemical performance is attributed to the beneficial features of the particular foamlike porous nanostructure and large surface area, which reduce the diffusion length for Li⁺ ions and enhance the structural integrity with sufficient void space for buffering the volume variation during the Li⁺ insertion/extraction.