Preparation and evaluation of monodispersed,submicron, non‐porous silica particles functionalized with β‐CD derivatives for chiral‐pressurized capillary electrochromatography

Submicron, non‐porous, chiral silica stationary phase has been prepared by the immobilization of functionalized β‐CD derivatives to isocyanate‐modified silica via chemical reaction and applied to the pressurized capillary electrochromatography (pCEC) enantio‐separation of various chiral compounds. The submicron, non‐porous, cyclodextrin‐based chiral stationary phases (sub_μm‐CSP2) exhibited excellent chiral recognition of a wide range of analytes including clenbuterol hydrochloride, mexiletine hydrochloride, chlorpheniramine maleate, esmolol hydrochloride, and metoprolol tartrate. The synthesized submicron particles were regularly spherical and uniformly non‐porous with an average diameter of around 800 nm and a mean pore size of less than 2 nm. The synthesized chiral stationary phase was packed into 10 cm × 100 μm id capillary columns. The sub_μm‐CSP2 column used in the pCEC system showed better separation of the racemates and at a higher rate compared to those used in the capillary liquid chromatography mode (cLC) system. The sub_μm‐CSP2 possessed high mechanical strength, high stereoselectivity, and long lifespan, demonstrating rapid enantio‐separation and good resolution of samples. The column provided an efficiency of up to 170 000 plates/m for n‐propylbenzene.     

Optimization of the surface modification process of cross‐linked polythiol‐coated chiral stationary phases synthesized by a two‐step thiol‐ene click reaction

A new platform technology for the preparation of stable chiral stationary phases was successfully optimized. The chiral selector tert‐butylcarbamoylquinine was firstly covalently connected to the polymer poly(3‐mercaptopropyl)methylsiloxane by thiol‐ene click reaction. Secondly, the quinine carbamate functionalized polysiloxane conjugate was coated onto the surface of vinyl modified silica particles and cross‐linked via thiol‐ene click reaction. The amount of polysiloxane, chiral selector, radical initiator, reaction solvent (chloroform and methanol), reaction time, and pore size of the supporting silica particles were varied and systematically optimized in terms of achievable plate numbers while maintaining simultaneously enantioselectivity. The optimization was based on elemental analysis data, chromatographic results, and H/u‐curves (Van Deemter) of the resultant chiral stationary phases. The results suggest that better chromatographic efficiency (higher plate numbers) at equal enantioselectivity can be achieved with methanol (a poor solvent for the polysiloxane that is dispersed rather than dissolved) and a lower film thickness of quinine carbamate functionalized polysiloxane. In this study, chiral stationary phases based on 100 Å silica slightly outperformed 200 Å silica particles (each 5 μm). The optimized two step material exhibited significantly reduced mass transfer resistance compared to the one step material and equal performance as a brush‐type chiral stationary phase.     

Enantioselective ultra high performance liquid and supercritical fluid chromatography: The race to the shortest chromatogram

The ever‐increasing need for enantiomerically pure chiral compounds has greatly expanded the number of enantioselective separation methods available for the precise and accurate measurements of the enantiomeric purity. The introduction of chiral stationary phases for liquid chromatography in the last decades has revolutionized the routine methods to determine enantiomeric purity of chiral drugs, agrochemicals, fragrances, and in general of organic and organometallic compounds. In recent years, additional efforts have been placed on faster, enantioselective analytical methods capable to fulfill the high throughput requirements of modern screening procedures. Efforts in this field, capitalizing on improved chromatographic particle technology and dedicated instrumentation, have led to highly efficient separations that are routinely completed on the seconds time scale. An overview of the recent achievements in the field of ultra‐high‐resolution chromatography on column packed with chiral stationary phases, both based on sub‐2 μm fully porous and sub‐3 μm superficially porous particles, will be given, with an emphasis on very recent studies on ultrafast chiral separations.     

Hydroxypropyl beta cyclodextrin bonded superficially porous particle-based HILIC stationary phases

(R,S)-Hydroxypropyl-modified β-cyclodextrin (RSP-CD) is a well-known chiral stationary phase. In this work, hydrophilic interaction liquid chromatographic (HILIC) selectivities of RSP-CD was demonstrated. Further, an evaluation of chromatographic performances of fully porous particles (FPPs)- and superficially porous particles (SPPs)-based RSP-CD stationary phases was performed. The RSP-CD-bonded SPP-based stationary phase showed faster and more efficient HILIC separations compared to the FPP-based stationary phases. In addition, the SPP-based RSP-CD stationary phase showed excellent selectivities for many classes of small polar molecules. Since the SPP-based stationary phase is allowed for separations performed at high flow rates without significant loss of efficiency, ultrafast separations (analysis times under 1 min) also was accomplished utilizing SPP-based RSP-CD stationary phase.     

Effect of different immobilization strategies on chiral recognition properties of Cinchona‐based anion exchangers

In the enantiomeric separation of highly polar compounds, a traditionally challenging task for high‐performance liquid chromatography, ion‐exchange chiral stationary phases have found the main field of application. In this contribution, we present a series of novel anion‐exchange‐type chiral stationary phases for enantiomer separation of protected amino phosphonates and N‐protected amino acids. Two of the prepared selectors possessed a double and triple bond within a single molecule. Thus, they were immobilized onto silica support employing either a thiol‐ene (radical) or an azide‐yne (copper(I)‐catalyzed) click reaction. We evaluated the selectivity and the effect of immobilization proceeding either by the double bond of the Cinchona alkaloid or a triple bond of the carbamoyl moiety on the chromatographic performance of the chiral stationary phases using analytes with protecting groups of different size, flexibility, and π‐acidity. The previously observed preference toward protecting groups possessing π‐acidic units, which is a typical feature of Cinchona‐based chiral stationary phases, was preserved. In addition, increasing the bulkiness of the selectors’ carbamoyl units leads to significantly reduced retention times, while very high selectivity toward the tested analytes is retained.     

金属有机骨架及其复合材料在分离领域中的应用进展

金属有机骨架（MOFs）是一类由无机金属离子与有机配体自组装形成的新型有机-无机杂化多孔材料,因具有比表面积超高、结构多样、热稳定性良好、孔道尺寸和性质可调等优势,在分离领域表现出重要的应用价值。然而,采用传统方法制备的MOFs多为粒径在微米或亚微米尺度的晶体,且颗粒形貌不规则,因此限制了MOFs在样品前处理和色谱固定相等领域的应用和发展。构建基于MOFs的复合材料是弥补MOFs应用缺陷的一项有效措施,有望在保留MOFs优越的分离特性的同时,引入基体材料的特定性能。该文简要综述了近年来MOFs及其复合材料在吸附、样品前处理和色谱固定相等分离领域中的应用进展,并对MOFs在分离科学中的应用前景做出展望。     

Recent development trends for chiral stationary phases based on chitosan derivatives,cyclofructan derivatives and chiral porous materials in high performance liquid chromatography

The separation of enantiomers by chromatographic methods, such as gas chromatography, high‐performance liquid chromatography and capillary electrochromatography, has become an increasingly significant challenge over the past few decades due to the demand of pharmaceutical, agrochemical, and food analysis. Among these chromatographic resolution methods, high‐performance liquid chromatography based on chiral stationary phases has become the most popular and effective method used for the analytical and preparative separation of optically active compounds. This review mainly focuses on the recent development trends for novel chiral stationary phases based on chitosan derivatives, cyclofructan derivatives, and chiral porous materials that include metal‐organic frameworks and covalent organic frameworks in high‐performance liquid chromatography. The enantioseparation performance and chiral recognition mechanisms of these newly developed chiral selectors toward enantiomers are discussed in detail.     

Monodispersed submicron porous silica particles functionalized with CD derivatives for chiral CEC

Rapid and efficient enantioseparation of halogen aryl alcohols and β‐blockers propranolol and pindolol in packed bed CEC (p‐CEC) using as‐prepared submicron porous silica chiral stationary phases (CSPs) has been achieved. Monodispersed 0.66 and 0.81 μm chiral submicron porous silica spheres were prepared using tetramethoxysilane and hexadecyltrimethylammonium bromide, followed by a hydrothermal treatment method with ammonia–ethanol to expand the pore of silica spheres without changing their spherical morphology. A proper specific surface of ca. 230 m²/g and pore sizes average of 6–8 nm were obtained by this method. The submicron porous silica spheres were modified with mono‐6‐phenylcarbamoylated β‐CD via thiol‐en radical addition. They were packed into 9 cm 50 μm id capillary columns with photopolymerized monolithic frits. These submicron CSPs showed greater column efficiency (about 476 000 plates/m for 4‐iodophenyl‐1‐ethanol) and higher resolution than the corresponding 3 μm CSP.     

Preparation and evaluation of a deoxycholic‐calix[4]arene hybrid‐type receptor as a chiral stationary phase for HPLC

We report the synthesis and enantioseparation characteristics of two novel covalently immobilized deoxycholic acid derivatives as chiral stationary phases for high‐performance liquid chromatography. In the structure of the first stationary phase, the 3‐position of deoxycholic acid is substituted with a 3,5‐dinitrophenylcarbamoyl group and the second one has an additional calix[4]arene attached to the carboxylic group of the deoxycholic acid. The chromatographic performance of the stationary phases was evaluated with enantioseparation of N‐(3,5‐dinitrobenzoyl)‐dl ‐leucine, N‐(3,5‐dinitrobenzoyl)‐dl ‐valine, omeprazole, diclofop‐methyl, dl ‐mandelic acid and (RS)‐pregabalin. Comparison of the performance characteristics of the prepared chiral stationary phases provided evidence for the active involvement of the calix[4]arene unit in the chiral recognition process. Both stationary phases are chemically bonded to the silica and can be used in both normal‐phase and reversed‐phase modes.     

In‐column preparation of a brush‐type chiral stationary phase using click chemistry and a silica monolith

Brush‐type chiral stationary phases (CSP) have been prepared both from a silica monolith and, separately, from 10 μm porous silica beads via a process of in‐column modification including attachment of the chiral selector via copper‐catalyzed azide–alkyne cycloaddition. Azide functionalities were first introduced on the pore surface of each type of support by reaction with 3‐(azidopropyl)trimethoxysilane, followed by immobilization of a proline‐derived chiral selector containing an alkyne moiety. This functionalization reaction was carried out in dimethylformamide (DMF) in the presence of catalytic amounts of copper (I) iodide. The separation performance of these triazole linked stationary phases was demonstrated in enantioseparations of four model analytes, which afforded separation factors as high as 11.4.     

金属有机框架色谱固定相的研究进展

金属有机框架(MOFs)是由金属离子或金属簇与有机配体通过配位作用自组装形成的一类新型多孔材料. MOFs具有独特的拓扑结构、丰富的孔隙结构、可调的孔道尺寸、巨大的比表面积以及灵活的表面修饰等特征,是色谱分离领域颇受关注的一类新型固定相. 综述了近几年MOFs材料作为固定相在气相色谱、液相色谱及手性拆分等领域应用的研究进展,展现MOFs材料在色谱分离领域的优异性能和应用潜力,并对MOFs材料在色谱固定相领域今后的发展进行了展望.     

Enantioseparation tuned by solvent polarity on a β‐cyclodextrin clicked chiral stationary phase

The efficient enantioseparation of 26 racemates has been achieved with the perphenylcarbamoylated cyclodextrin clicked chiral stationary phase by screening the optimum composition of mobile phase in high‐performance liquid chromatography. The chromatographic results indicate that both the retention and chiral resolution of racemates are closely related to the polarity of the mobile phases and the structures of analytes. The addition of alcohols can significantly tune the enantioseparation in normal‐phase high‐performance liquid chromatography. The addition of methanol and the ratio of ethanol/methanol or isopropanol/methanol played a key role on the resolution of flavonoids in ternary eluent systems. The chiral separation of flavonoids with pure organic solvent as mobile phase indicates the preferential order for chiral resolution is methanol>ethanol>isopropanol>n‐propanol>acetonitrile.     

A polymeric chiral surface functionality immobilized on uniformly sized macroporous polymer beads

Uniformly sized functionalized macroporous polymer beads were prepared by either a classical copolymerization method or recently reported in situ surface modification method utilizing chiral methacrylamide as a functional modifier. To evaluate conformational and/or specific differences in their surface chiral functionality, we applied chromatographic evaluation techniques. The prepared modified beads were utilized as chiral stationary phase in high-performance liquid chromatography (HPLC). Those prepared by the in situ surface modification method tended to show higher chiral recognition ability than those by the classical copolymerization method, even if the equivalent amount of the chiral functional group was involved within polymer beads. Detailed chromatographic studies exhibited the in situ surface modification method could lead to polymeric methacrylamide functionality on the surface within relatively large pore size regions of the macroporous polymer beads, while the classical copolymerization method tended to form less polymeric surface functionality. The difference in the chiral surface functionality on both of macroporous polymer beads afforded drastic change in chromatographic chiral recognition ability. Complete resolution of a drug, thalidomide could be achieved on the chiral stationary phase with the polymeric chiral surface functionality, while no resolution was found on that with the monomeric one even if the same chiral methacrylamide was used as a modifier to prepare the chiral stationary phases. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2747–2757, 1997     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

Recent trends in ultra‐fast HPLC: New generation superficially porous silica columns

New generation columns, i.e. packed with superficially porous silica particles are available as trade names with following manufacturers: Halo, Ascentis Express, Proshell 120, Kinetex, Accucore, Sunshell, and Nucleoshell. These provide ultra‐fast HPLC separations for a variety of compounds with moderate sample loading capacity and low back pressure. Chemistries of these columns are C₈, C₁₈, RP‐Amide, hydrophilic interaction liquid chromatography, penta fluorophenyl (PFP), F5, and RP‐aqua. Normally, the silica gel particles are of 2.7 and 1.7 μm as total and inner solid core diameters, respectively, with 0.5‐μm‐thick of outer porous layer having 90 Å pore sizes and 150 m²/g surface area. This article describes these new generation columns with special emphasis on their textures and chemistries, separations, optimization, and comparison (inter and intra stationary phases). Besides, future perspectives have also been discussed.     

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.     

Recent advances in gas chromatography for solid and liquid stationary phases containing metal ions

This review is devoted to the application of metal complexes as column packings and liquid stationary phases in gas chromatography. Particular attention is paid to the stationary phases with nitrogen-containing functional groups (e.g., amine and ketoimine) and β-diketonates on the modified silica surface. The review also concerns the results of the research on metallomesogenes and chiral stationary phases. The factors influencing the retention mechanism in complexation gas chromatography are discussed. Practical application of the metal chelate-containing chromatographic packings for analytical separation of organic substances is considered.     

Dual‐mode hydrophilic interaction normal phase and reversed phase liquid chromatography of polar compounds on a single column

Adopting a stationary phase convention circumvents problematic definition of the boundary between the stationary and the mobile phase in the liquid chromatography, resulting in thermodynamically consistent and reproducible chromatographic data. Three stationary phase definition conventions provide different retention data, but equal selectivity: (i) the complete solid phase moiety; (ii) the solid porous part carrying the active interaction centers; (iii) the volume of the inner column pores. The selective uptake of water from the bulk aqueous‐organic mobile phase significantly affects the volume and the properties of polar stationary phases. Some polar stationary phases provide dual‐mode retention mechanism in aqueous‐organic mobile phases, reversed‐phase in the water‐rich range, and normal‐phase at high concentrations of the organic solvent in water. The linear solvation energy relationship model characterizes the structural contributions of the non‐selective and selective polar interactions both in the water‐rich and organic solvent‐rich mobile phases. The inner‐pore convention provides a single hold‐up volume value for the retention prediction on the dual‐mode columns over the full mobile phase range. Using the dual‐mode monolithic polymethacrylate zwitterionic micro‐columns alternatively in each mode in the first dimension of two‐dimensional liquid chromatography, in combination with a short reversed‐phase column in the second dimension, provides enhanced sample information.     

Application of bromoacetate‐substituted β‐CD‐bonded silica particles as chiral stationary phase for HPLC

Bromoacetate‐substituted [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy]propylsilyl‐appended silica particles (BACD‐HPS), an important and useful synthetic intermediate for preparation of novel types of macrocycles‐capped β‐CD‐bonded silica particles including crown ether/cyclam/calix[4]arene‐capped β‐CD‐bonded silica particles, have been prepared and used as chiral stationary phase for HPLC. This synthetic stationary phase is characterized by means of elemental analysis. For the first time, the chromatographic behavior of BACD‐HPS was systematically evaluated with several disubstituted benzenes and some chiral drug compounds under both normal and RP conditions in HPLC. The results show that BACD‐HPS has excellent selectivity for the separation of aromatic positional isomers and chiral isomers of some drug compounds when used as stationary phase in HPLC.