Single‐Walled Carbon Nanotube/Metalloporphyrin Composites for the Chemiresistive Detection of Amines and Meat Spoilage

Chemiresistive detectors for amine vapors were made from single‐walled carbon nanotubes by noncovalent modification with cobalt meso‐arylporphyrin complexes. We show that through changes in the oxidation state of the metal, the electron‐withdrawing character of the porphyrinato ligand, and the counteranion, the magnitude of the chemiresistive response to ammonia could be improved. The devices exhibited sub‐ppm sensitivity and high selectivity toward amines as well as good stability to air, moisture, and time. The application of these chemiresistors in the detection of various biogenic amines (i.e. putrescine, cadaverine) and in the monitoring of spoilage in raw meat and fish samples (chicken, pork, salmon, cod) over several days was also demonstrated.     

Solid Polymer Substrates and Coated Fibers Containing 2,4,6‐Trinitrobenzene Motifs as Smart Labels for the Visual Detection of Biogenic Amine Vapors

Attempts to polymerize trinitrobenzene derivatives (TNB) have been fruitless so far. Accordingly, polymers containing TNB have not been exploited in spite of their envisaged potential applications. Here, we describe two ways for preparing polymers with TNB moieties thus overcoming the previously reported polymerization impairments. We also report on the exploitation of the materials, both obtained as tractable transparent films and coated fibers, as smart labels for the visual detection of amine vapors. More precisely, amines in the atmosphere surrounding the sensory materials diffuse into them reacting with the TNB motifs forming highly colored Meisenheimer complexes, giving rise to development of color and to the naked eye sensing phenomenon. This is the case of highly volatile amines, such as trimethylamine, produced in food spoilage, specifically in the deterioration of fish or meat, for which the color development of the smart labels can be used as a visual test for food freshness.     

Combinatorial Energy Transfer between an End‐Capped Conjugated Polyelectrolyte and Chromophore‐Labeled PNA for Strand‐Specific DNA Detection

We report a macromolecular end‐capping approach to improve the detection sensitivity of cationic conjugated polymer (CCP) based DNA detection. A phenylethynyl anthracene (PEA) end‐capped cationic polyfluorene (PF) derivative ( P1 ) is synthesized via Suzuki coupling. Due to efficient fluorescence resonance energy transfer (FRET) from the polymer backbone to the end‐capper PEA units, the polymer ( P1 ) fluorescence is dominated by the emission from PEA even in dilute aqueous solution. P1 emission has a better spectral overlap with fluorescein (Fl) absorption compared to that for uncapped PF ( P2 ). In addition, the intra and intermolecular energy transfer for P1 is more efficient in the presence of DNA due to complexation‐induced polymer aggregation. These impart a combinatorial FRET between P1 and an Fl‐labeled probe which is more efficient than that between P2 and the same probe. P1 thus offers a better DNA detection sensitivity relative to P2 and opens up new opportunities to improve the performance of CCP based biosensors involving FRET.

     

Lanthanide(III)‐Based Multicolor Luminescent Hybrid Gel for Amine Sensing

Bridged polysilsesquioxanes (BPs) show great potential in the development of lanthanide‐based luminescent materials, owing to their capacity to loading lanthanide complexes with high concentration and their flexible processability. A novel BP precursor, consisting of a C ₃‐symmetrical benzene central core moiety, capable of sensitizing the luminescence of Eu³⁺ and Tb³⁺ is reported. Tunable, full‐color luminescent gels were facilely prepared by mixing the as‐synthesized precursor and Ln³⁺ ions in appropriate solvents. By either changing the Eu³⁺/Tb³⁺ molar ratio or altering the excitation wavelength, the emission colors of the final gels can be finely tuned. Additionally, the yellow‐colored emissive gel with a molar ratio of Eu³⁺ to Tb³⁺ of 0.5 can be used as an effective ratiometric luminescent sensor for distinguishing amines with lower pK _a (<5) from those with higher pK _a (>9).     

Propargyl Amine Synthesis Catalysed by Gold and Copper Thin Films by Using Microwave‐Assisted Continuous‐Flow Organic Synthesis (MACOS)

An effective multi‐component reaction (MCR) protocol has been developed for the construction of propargyl amines from aldehydes, amines and terminal alkynes by using microwave‐assisted continuous‐flow organic synthesis (MACOS). The process is catalysed by thin films of either copper or gold that achieve temperatures in excess of 900 °C when irradiated with low levels of microwave power. The process works equally well for premixed solutions of the three starting materials, or as three separate streams, which improves the combinatorial efficiency of the method. The process tolerates a wide variety of functional groups and heterocycles, and conversion over these diverse substrates ranges from 70–90 %.     

Syntheses,Phase Behavior,Supramolecular Chirality,and Field‐Effect Carrier Mobility of Asymmetrically End‐Capped Mesogenic Oligothiophenes

Supramolecular chirality and liquid crystalline OFET : Achiral end‐capped oligothiophenes can be tuned to exhibit supramolecular chirality with unique striped textures showing distinct circular dichroism signals as well as a highly ordered SmE phase that leads to high hole carrier mobility.

     

Light‐Activated Sensitive Probes for Amine Detection

Our new, simple, and accurate colorimetric method is based on diarylethenes (DAEs) for the rapid detection of a wide range of primary and secondary amines. The probes consist of aldehyde‐ or ketone‐substituted diarylethenes, which undergo an amine‐induced decoloration reaction, selectively to give the ring‐closed isomer. Thus, these probes can be activated at the desired moment by light irradiation, with a sensitivity that allows the detection of amines at concentrations as low as 10⁻⁶ m in solution. In addition, the practical immobilization of DAEs on paper makes it possible to detect biogenic amines, such as cadaverine, in the gas phase above a threshold of 12 ppbv within 30 seconds.     

Riboflavin‐Based Fluorogenic Sensor for Chemo‐ and Enantioselective Detection of Amine Vapors

A novel turn‐on fluorogenic chiral sensory system has been developed using a protonated riboflavin and riboflavin‐derived cationic polymer as a fluorophore precursor and a specific amine receptor, respectively, which enables the solid‐state chemo‐ and enantioselective fluorogenic visual detection of primary and secondary amine vapors.     

Picosecond Structural Relaxation of Abietic Acid Based Amine End Capped Para‐Phenylenevinylene Trimers in Solution

The synthesis and photophysical properties of six new abietic acid based amine end‐capped p‐phenylenevinylene trimers (AECPV3) in their lowest excited singlet states are presented. The AECPV3 compounds show a large red‐shift of both the absorption (25–30 nm) and emission (37–42 nm) maxima with respect to those of the corresponding trimers. Picosecond time‐resolved fluorescence data reveal the presence of a fast conformational relaxation process (40–62 ps) of the initially excited compounds, leading to more planar conformers. The conformational relaxation time is proportional to the volume of both the side chain and the amine groups.     

2,2′:3′,2′′‐Terthiophene‐Based all‐Thiophene Dendrons and Dendrimers: Synthesis,Structural Characterization,and Properties

The synthesis of generational dendritic oligothiophenes (DOTs) has been successfully achieved by a divergent/convergent approach that involves halogenation, boronation, and palladium‐catalyzed Suzuki coupling reactions. The key point in the presented synthetic approach is the use of trimethylsilyl (TMS) protecting groups, which allow for the core‐lithiation and subsequent boronation of the dendrons and for the peripheral ipso‐substitution with iodine monochloride or N‐bromosuccimide. In addition, the TMS protecting groups can be completely removed by using tetrabutylammonium fluoride, thus yielding only‐thiophene‐based dendrons and dendrimers. Due to their highly branched structure, all these synthesized DOTs are soluble in organic solvents. Chemical structures were confirmed by NMR spectroscopic, mass spectrometric, and elemental analysis. Concentration‐dependent ¹H NMR spectroscopic investigations revealed that the higher generation compounds tend to aggregate in solution. Such an aggregation behavior was further confirmed by measuring with MALDI‐TOF MS. Both MALDI‐TOF MS and gel‐permeation chromatography (GPC) analyses confirmed the monodispersity of the DOTs. Furthermore, GPC results revealed that these DOT molecules adopt a condensed globular molecular shape. Their optical and electronic properties were also investigated. The results indicated that these DOTs comprise various conjugated α‐oligothiophenes with different chain lengths, which results in the higher generation compounds showing broad and featureless UV/Vis absorption spectra and ill‐defined redox waves.     

Free Volume and Swelling in Thin Films of Poly(N‐isopropylacrylamide) End‐Capped with n‐Butyltrithiocarbonate

The free volume in thin films of poly(N‐isopropylacrylamid) end‐capped with n‐butyltriocarbonate (nbc‐PNIPAM) is probed with positron annihilation lifetime spectroscopy (PALS). The PALS measurements are performed as function of energy to obtain depth profiles of the free volume of nbc‐PNIPAM films. The range of nbc‐PNIPAM films with thicknesses from 40 to 200 nm is focused. With decreasing film thickness the free volume increases in good agreement with an increase in the maximum swelling capability of the nbc‐PNIPAM films. Thus in thin hydrogel films the sorption and swelling behavior is governed by free volume.

     

Helicenes as All‐in‐One Organic Materials for Application in OLEDs: Synthesis and Diverse Applications of Carbo‐ and Aza[5]helical Diamines

A set of eight helical diamines were designed and synthesized to demonstrate their relevance as all‐in‐one materials for multifarious applications in organic light‐emitting diodes (OLEDs), that is, as hole‐transporting materials (HTMs), EMs, bifunctional hole transporting + emissive materials, and host materials. Azahelical diamines function very well as HTMs. Indeed, with high T_g values (127–214 °C), they are superior alternatives to popular N,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐(1,1′‐biphenyl)‐4,4′‐diamine (NPB). All the helical diamines exhibit emissive properties when employed in nondoped as well as doped devices, the performance characteristics being superior in the latter. One of the carbohelical diamines (CHTPA) serves the dual function of hole transport as well as emission in simple double‐layer devices; the efficiencies observed were better by quite some margin than those of other emissive helicenes reported. The twisting endows helical diamines with significantly high triplet energies such that they also function as host materials for red and green phosphors, that is, [Ir(btp)₂acac] (btp=2‐(2′‐benzothienyl)pyridine; acac=acetylacetonate) and [Ir(ppy)₃] (ppy=2‐phenylpyridine), respectively. The results of device fabrications demonstrate how helicity/ helical scaffold may be diligently exploited to create molecular systems for maneuvering diverse applications in OLEDs.     

Ruthenium‐Amine Conjugated Organometallic Materials for Multistate Near‐IR Electrochromism and Information Storage

Monometallic and dimetallic complexes with the ruthenium‐amine conjugated structural unit have been prepared. These complexes display consecutive redox waves with low potentials and rich and intense absorptions in the near‐infrared region. The electrochemical and spectroscopic properties can be modulated using substituents or auxiliary ligands with different electronic natures. Through simple functionalization, electropolymerized or monolayer thin films of these complexes have been prepared. These films display multistate near‐infrared electrochromism with good contrast ratios and long optical retention times. In addition, flip‐flop and flip‐flap‐flop memories have been demonstrated on the basis of these thin films.

     

Highly Sensitive and Selective Fluorometric/Electrochemical Dual‐Channel Sensors for TNT and DNT Explosives

A novel electro‐active compound, TCAC , is synthesized and its electrochemical polymerized film is used to detect 2,4,6‐trinitrotoluene (TNT) and 2,4‐dinitrotoluene (DNT) explosives through a fluorometric/electrochemical dual‐channel sensor with high sensitivity and selectivity. In particular, the electrochemical sensor for the analysis of TNT had an enhanced sensitivity of 0.5 μM . The detection limit of the sensor was calculated to be 15 nM .