Effects of long‐term exposure to elevated CO2 conditions in slow‐growing plants using a 12C‐enriched CO2‐labelling technique

Despite their relevancy, long‐term studies analyzing elevated CO₂ effect in plant production and carbon (C) management on slow‐growing plants are scarce. A special chamber was designed to perform whole‐plant above‐ground gas‐exchange measurements in two slow‐growing plants (Chamaerops humilis and Cycas revoluta) exposed to ambient (ca. 400 µmol mol^?1) and elevated (ca. 800 µmol mol^?1) CO₂ conditions over a long‐term period (20 months). The ambient isotopic ¹³C/¹²C composition (δ¹³C) of plants exposed to elevated CO₂ conditions was modified (from ca. ?12.8‰ to ca. ?19.2‰) in order to study carbon allocation in leaf, shoot and root tissues. Elevated CO₂ increased plant growth by ca. 45% and 60% in Chamaerops and Cycas, respectively. The whole‐plant above‐ground gas‐exchange determinations revealed that, in the case of Chamaerops, elevated CO₂ decreased the photosynthetic activity (determined on leaf area basis) as a consequence of the limited ability to increase C sink strength. On the other hand, the larger C sink strength (reflected by their larger CO₂ stimulatory effect on dry mass) in Cycas plants exposed to elevated CO₂ enabled the enhancement of their photosynthetic capacity. The δ¹³C values determined in the different plant tissues (leaf, shoot and root) suggest that Cycas plants grown under elevated CO₂ had a larger ability to export the excess leaf C, probably to the main root. The results obtained highlighted the different C management strategies of both plants and offered relevant information about the potential response of two slow‐growing plants under global climate change conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

Heterogeneous Molecular Systems for Photocatalytic CO2 Reduction with Water Oxidation

Artificial photosynthesis—reduction of CO₂ into chemicals and fuels with water oxidation in the presence of sunlight as the energy source—mimics natural photosynthesis in green plants, and is considered to have a significant part to play in future energy supply and protection of our environment. The high quantum efficiency and easy manipulation of heterogeneous molecular photosystems based on metal complexes enables them to act as promising platforms to achieve efficient conversion of solar energy. This Review describes recent developments in the heterogenization of such photocatalysts. The latest state‐of‐the‐art approaches to overcome the drawbacks of low durability and inconvenient practical application in homogeneous molecular systems are presented. The coupling of photocatalytic CO₂ reduction with water oxidation through molecular devices to mimic natural photosynthesis is also discussed.     

Graphene Oxide Membranes with Heterogeneous Nanodomains for Efficient CO2 Separations

Achieving high membrane performance in terms of gas permeance and carbon dioxide selectivity is an important target in carbon capture. Aiming to manipulate the channel affinity towards CO₂ to implement efficient separations, gas separation membranes containing CO₂‐philic and non‐CO₂‐philic nanodomains in the interlayer channels of graphene oxide (GO) were formed by intercalating poly(ethylene glycol) diamines (PEGDA). PEGDA reacts with epoxy groups on the GO surface, constructing CO₂‐philic nanodomains and rendering a high sorption capacity, whereas unreacted GO surfaces give non‐CO₂‐philic nanodomains, rendering low‐friction diffusion. Owing to the orderly stacking of nanochannels through cross‐linking and the heterogeneous nanodomains with moderate CO₂ affinity, a GO‐PEGDA500 membrane exhibits a high CO₂ permeance of 175.5 GPU and a CO₂/CH₄ selectivity of 69.5, which is the highest performance reported for dry‐state GO‐stacking membranes.     

Xenon Recovery by DD3R Zeolite Membranes: Application in Anaesthetics

Xe is only produced by cryogenic distillation of air, and its availability is limited by the extremely low abundance. Therefore, Xe recovery after usage is the only way to guarantee sufficient supply and broad application. Herein we demonstrate DD3R zeolite as a benchmark membrane material for CO₂/Xe separation. The CO₂ permeance after an optimized membrane synthesis is one order magnitude higher than for conventional membranes and is less susceptible to water vapour. The overall membrane performance is dominated by diffusivity selectivity of CO₂ over Xe in DD3R zeolite membranes, whereby rigidity of the zeolite structure plays a key role. For relevant anaesthetic composition (<5 % CO₂) and condition (humid), CO₂ permeance and CO₂/Xe selectivity stabilized at 2.0×10^?8 mol m^?2 s^?1 Pa^?1 and 67, respectively, during long‐term operation (>320 h). This endows DD3R zeolite membranes great potential for on‐stream CO₂ removal from the Xe‐based closed‐circuit anesthesia system. The large cost reduction of up to 4 orders of magnitude by membrane Xe‐recycling (>99+%) allows the use of the precious Xe as anaesthetics gas a viable general option in surgery.     

Hydrogen Peroxide‐mediated Inactivation of Two Chloroplastic Peroxidases,Ascorbate Peroxidase and 2‐Cys Peroxiredoxin†

Reactive oxygen species (ROS), such as the superoxide anion and hydrogen peroxide, are generated by the photosystems because photoexcited electrons are often generated in excess of requirements for CO₂ fixation and used for reducing molecular oxygen, even under normal environmental conditions. Moreover, ROS generation is increased in chloroplasts if plants are subjected to stresses, such as drought, high salinity and chilling. Chloroplast‐localized isoforms of ascorbate peroxidase and possibly peroxiredoxins assume the principal role of scavenging hydrogen peroxide. However, in vitro studies revealed that both types of peroxidases are easily damaged by hydrogen peroxide and lose their catalytic activities. This is one contributing factor for cellular damage that occurs under severe oxidative stress. In this review, I describe mechanisms of hydrogen peroxide‐mediated inactivation of these two enzymes and discuss a reason why they became susceptible to damage by hydrogen peroxide.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Role of interfacial interactions on the anomalous swelling of polymer thin films in supercritical carbon dioxide

It has recently been shown that thin polymer films in the nanometer thickness range exhibit anomalous swelling maxima in supercritical CO₂ (Sc‐Co₂) in the vicinity of the critical point of CO₂. The adsorption isotherm of CO₂ on carbon black, silica surfaces, porous zeolites, and other surfaces, is known to exhibit anomalous maxima under similar CO₂ conditions. It is believed that because CO₂ possesses a low cohesive energy density, there would be an excess amount of CO₂ at the surfaces of these materials and hence the CO₂/polymer interface. This might cause excess CO₂ in the polymer films near the free surface, and hence the swelling anomaly. In addition, an excess of CO₂ would reside at the polymer/substrate and polymer/CO₂ interfaces for entropic reasons. These interfacial effects, as have been suggested, should account for an overall excess of CO₂ in a thin polymer film compared to the bulk, and would be responsible for the anomalous swelling. In this study, we use in situ spectroscopic ellipsometry to investigate the role of interfaces on the anomalous swelling of polymer thin films of varying initial thicknesses, h₀, exposed to Sc‐CO₂. We examined three homopolymers, poly(1,1′‐dihydroperflurooctyl methacrylate) (PFOMA), polystyrene (PS), poly(ethylene oxide) (PEO), that exhibit very different interactions with Sc‐CO₂, and the diblock copolymer of PS‐b‐PFOMA. We show that the anomalous swelling cannot be solely explained by the excess adsorption of CO₂ at interfaces. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1313–1324, 2007     

Amine‐Appended Hierarchical Ca‐A Zeolite for Enhancing CO2/CH4 Selectivity of Mixed‐Matrix Membranes

An amine‐appended hierarchical Ca‐A zeolite that can selectively capture CO₂ was synthesized and incorporated into inexpensive membrane polymers, in particular polyethylene oxide and Matrimid, to design mixed‐matrix membranes with high CO₂/CH₄ selectivities. Binary mixture permeation testing reveals that amine‐appended mesoporous Ca‐A is highly effective in improving CO₂/CH₄ selectivity of polymeric membranes. In particular, the CO₂/CH₄ selectivity of the polyethylene oxide membrane increases from 15 to 23 by incorporating 20 wt % amine‐appended Ca‐A zeolite. Furthermore, the formation of filler/polymer interfacial defects, which is typically found in glassy polymer‐zeolite pairs, is inhibited owing to the interaction between the amine groups on the external surface of zeolites and polymer chains. Our results suggest that the amine‐appended hierarchial Ca‐A, which was utilized in membrane fabrication for the first time, is a good filler material for fabricating a CO₂‐selective mixed‐matrix membrane with defect‐free morphology.     

Lock‐and‐Key and Shape‐Memory Effects in an Unconventional Synthetic Path to Magnesium Metal–Organic Frameworks

We report a new magnesium metal–organic framework (MOF) (CPM‐107) with a special interaction with CO₂. CPM‐107 contains Mg₂‐acetate chains crosslinked into a 3D net by terephthalate. It has an anionic framework encapsulating ordered extra‐framework cations and solvent molecules. The desolvated form is closed and unresponsive to common gasses, such as N₂, H₂, and CH₄. Yet, with CO₂ at 195 K, it abruptly opens and turns into a rigid porous form that is irreversible via desorption. Once opened by CO₂, CPM‐107 remains in the stable porous state accessible to additional gas types over multiple cycles or CO₂ itself at different temperatures. The porous phase can be re‐locked to return to the initial closed phase via re‐solvation and desolvation. Such peculiar properties of CPM‐107 are apparently linked to a convergence of factors related to both framework and extra‐framework features. The unusual CO₂ effect is currently the only available path to porous CPM‐107 which shows efficient C₂H₂/CO₂ separation.     

Pebax‐Based Membrane Filled with Two‐Dimensional Mxene Nanosheets for Efficient CO2 Capture

Mixed matrix membranes (MMMs) made from inorganic fillers and polymers is a kind of promising candidate for gas separation. In this work, two‐dimensional MXene nanosheets were synthesized and incorporated into a polyether‐polyamide block copolymer (Pebax) matrix to fabricate MMM for CO₂ capture. The physicochemical properties of MXene nanosheets and MXene/Pebax membranes were studied systematically. The introduction of MXene nanosheets provided additional molecular transport channels and meanwhile enhanced the CO₂ adsorption capacity, thereby enhancing both the CO₂ peremance and CO₂/N₂ selectivity of Pebax membrane. The optimized MXene/Pebax membrane with a MXene loading of 0.15 wt % displayed a high separation performance with a CO₂ permeance of 21.6 GPU and a CO₂/N₂ selectivity of 72.5, showing potential application in CO₂ capture.     

A Uniformly Oriented MFI Membrane for Improved CO2 Separation

Membrane separation of CO₂ from natural gas, biogas, synthesis gas, and flu gas is a simple and energy‐efficient alternative to other separation techniques. But results for CO₂‐selective permeance have always been achieved by randomly oriented and thick zeolite membranes. Thin, oriented membranes have great potential to realize high‐flux and high‐selectivity separation of mixtures at low energy cost. We now report a facile method for preparing silica MFI membranes in fluoride media on a graded alumina support. In the resulting membrane straight channels are uniformly vertically aligned and the membrane has a thickness of 0.5 μm. The membrane showed a separation selectivity of 109 for CO₂/H₂ mixtures and a CO₂ permeance of 51×10^?7 mol m^?2 s^?1 Pa^?1 at ?35 °C, making it promising for practical CO₂ separation from mixtures.     

Polyurethane‐mesoporous silica gas separation membranes

The concept of mixed matrix membrane comprising dispersed inorganic fillers into a polymer media has revealed appealing to tune the gas separation performance. In this work, the membranes were prepared by incorporation of mesoporous silica into polyurethane (PU). Mesoporous silica particles with different pore size and structures, MCM‐41, cubic MCM‐48 and SBA‐16, were synthesized by templating method and functionalized with 3‐aminopropyltriethoxysilane (APTES). High porosity and aminated surface of the mesoporous silica enhance the adhesion of the particles to the PU matrix. The SEM and FTIR results showed strong interactions between the particles and the PU chains. Moreover, the thermal stability of the hybrid PUs improved compared to the pure polymer. Gas transport properties of the membranes were measured for pure CO₂, CH₄, O₂, and N₂ gases at 10 bar and 25°C. The results showed that the gas permeabilities enhanced with increasing in the loading of modified mesoporous silica particles. High porosity and amine‐functionalized particles render opportunities to enhance the gas diffusivity and solubility through the membranes. The enhanced gas transport properties of the mixed matrix membranes reveal the advantages of mesoporous silica to improve the gas permeability (CO₂ permeability up to ~70) without scarifying the gas selectivity (α(CO₂/N₂)~ 30 for 5 wt% SBA‐16 content).     

A MOF Glass Membrane for Gas Separation

Metal–organic framework (MOF) glasses are promising candidates for membrane fabrication due to their significant porosity, the ease of processing, and most notably, the potential to eliminate the grain boundary that is unavoidable for polycrystalline MOF membranes. Herein, we developed a ZIF‐62 MOF glass membrane and exploited its intrinsic gas‐separation properties. The MOF glass membrane was fabricated by melt‐quenching treatment of an in situ solvothermally synthesized polycrystalline ZIF‐62 MOF membrane on a porous ceramic alumina support. The molten ZIF‐62 phase penetrated into the nanopores of the support and eliminated the formation of intercrystalline defects in the resultant glass membrane. The molecular sieving ability of the MOF membrane is remarkably enhanced via vitrification. The separation factors of the MOF glass membrane for H₂/CH₄, CO₂/N₂ and CO₂/CH₄ mixtures are 50.7, 34.5, and 36.6, respectively, far exceeding the Robeson upper bounds.     

An Hetero‐Epitaxially Grown Zeolite Membrane

The secondary growth methodology to form zeolite membranes has stringent requirements for homogeneous epitaxial intergrowth of the seed layer and limits the number of accessible high‐quality zeolite membranes. Despite previous reports on hetero‐epitaxial growth, high‐performance zeolite membranes have yet to be reported using this approach. Here, the successful hetero‐epitaxial growth of highly siliceous ZSM‐58 (DDR‐type zeolite) films from a SSZ‐13 (CHA‐type zeolite) seed layer is reported. The resulting membranes show excellent CO₂ perm‐selectivities, having maximum CO₂ /N₂ and CO₂ /CH₄ separation factors (SFs) as high as about 17 and 279, respectively, at 30 °C. Furthermore, the hybrid membrane maintains the CO₂ perm‐selectivity in the presence of water vapor (the third main component in both cases), that is, CO₂ /N₂ SF of about 14 and CO₂ /CH₄ SF of about 78, respectively, at 50 °C (a representative temperature of both CO₂‐containing streams).     

Preparation and Characterization of PVDF‐HFP Membrane

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) microporous membrane was prepared by supercritical CO₂ extraction of dibutyl phthalate (DBP) template from PVDF‐HFP/DBP film. The effects of extraction conditions such as pressure, temperature, and extraction time on extraction efficiency and the porosity of membrane were studied. The extraction efficiency of DBP and size stability of polymer membrane during extraction was compared with those of solvent extraction process. The structure of the resulting membrane was characterized by scanning electron microphotograph (SEM), X‐ray diffraction (XRD) and differential scanning calorimeter (DSC). With increasing the extraction temperature, pressure and time, the extraction efficiency and the porosity increased. Maximum extraction efficiency is obtained at extraction pressure and temperature higher than 18 MPa and 75°C, respectively. The porosity of membranes depended on the extraction efficiency and shrinkage ratio of membranes. Compared with solvent extraction, supercritical CO₂ extraction of the film generated the membrane with more uniform structure and higher porosity.     

Analysis of electric and electrochemical connection between leaf cells of Tradescantia virginiana L. that responds to CO2 stress by changing intracellular potential

The intracellular potential of a Tradescantia virginiana L. leaf changed markedly in response to CO₂ stress. To analyse this response, the intercellular connection of the leaf was investigated. When a limited area of a leaf was exposed to CO₂, no response was obtained at a site separate from the CO₂-exposed region. When the leaf was cut into various-sized fragments and exposed to CO₂, each fragment size showed remarkably similar response patterns. However, when an electrochemical impulse was applied to one epidermal cell by injecting KC1 electrophoretically, the same patterns of potential response were obtained from cells within a radius of 2 mm. Therefore, within this region, epidermal cells of T. virginiana are electrically short-circuited. In contrast, only a slight increase in the K⁺ concentration could be observed in neighbouring cells. Therefore, the cells appear to be electrochemically isolated from each other.     

Fabrication of Crystalline Microporous Membrane from 2D MOF Nanosheets for Gas Separation

Metal‐organic frameworks (MOFs)‐based membranes have shown great potentials as applications in gas separation. In this work, a uniform membrane based on 2D MOF Ni₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaaminotriphenylene) was fabricated on ordered macroporous AAO via the filtration method. To fabricate the membrane, we obtained the Ni₃(HITP)₂ nanosheets as building blocks via a soft‐physical exfoliation method successfully that were confirmed by AFM and TEM. We also studied the H₂, CO₂ and N₂ adsorption isotherms of Ni₃(HITP)₂ powder at room temperature, which shows Ni₃(HITP)₂ has high heats of adsorption for CO₂ and high selectivity of CO₂ over N₂. Gas permeation tests indicate that the Ni₃(HITP)₂ membrane shows high permeance and selectivity of CO₂ over N₂, as well as good selectivity of H₂ over N₂. The ideal separation factors of CO₂/N₂ and H₂/N₂ from sing‐gas permeances are 13.6 and 7.8 respectively, with CO₂ permeance of 3.15×10^?6 mol?m^?2?s^?1?Pa^?1. The membrane also showed good stability, durability and reproducibility, which are of potential interest for practical applications in the CO₂ separations.     

Hydrocarbon solubility,permeability, and competitive sorption effects in polymer of intrinsic microporosity (PIM‐1) membranes

The sorption and permeation of pentane, hexane, and toluene through highly permeable polymer of intrinsic microporosity (PIM‐1) membranes were investigated. It was established that the hydrocarbons sorbed strongly within the micro‐void regions of the PIM‐1 membrane. The sorption concentration was similar for the paraffins, pentane and hexane, but greater for aromatic toluene at high vapor activities. The magnitude of the hydrocarbon permeability was associated with the critical temperature of the hydrocarbon. The PIM‐1 membrane displayed selectivity for the three hydrocarbons over CO₂. As a consequence, the presence of the three hydrocarbons dramatically reduced the permeability of CO₂ and N₂ under mixed gas–vapor conditions to 68%–95% below the dry gas value. For all three hydrocarbons the N₂ permeability was more strongly impacted than CO₂ permeability, and hence the ideal CO₂/N₂ selectivity of PIM‐1 increased. It was determined that CO₂ and N₂ solubility decreased because of hydrocarbon competitive sorption while CO₂ and N₂ diffusivity also decreased because of anti‐plasticization, which was due to the presence of hydrocarbon clusters within the membrane structure. There was a clear correlation between the magnitude of anti‐plasticization and the critical temperature of the hydrocarbon. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 397–404     

Molecular Evidence for Metallic Cobalt Boosting CO2 Electroreduction on Pyridinic Nitrogen

Nitrogen‐doped carbon materials (N‐C_mat) are emerging as low‐cost metal‐free electrocatalysts for the electrochemical CO₂ reduction reaction (CO₂RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO₂RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well‐defined N‐C_mat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO₂RR performance on pyridinic N can be significantly boosted by electronic modulation from in‐situ‐generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28 mA cm^?2 at ?0.9 V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO₂RR on N‐C_mat, which may guide the exploration of cost‐effective electrocatalysts for efficient CO₂ reduction.     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.