Design of Advanced MnO/N‐Gr 3D Walls through Polymer Cross‐Linking for High‐Performance Supercapacitor

Three‐dimensional, vertically aligned MnO/nitrogen‐doped graphene (3D MnO/N‐Gr) walls were prepared through facile solution‐phase synthesis followed by thermal treatment. Polyvinylpyrrolidone (PVP) was strategically added to generate cross‐links to simultaneously form 3D wall structures and to incorporate nitrogen atoms into the graphene network. The unique wall features of the as‐prepared 3D MnO/N‐Gr hybirdes provide a large surface area (91.516 m² g^?1) and allow for rapid diffusion of the ion electrolyte, resulting in a high specific capacitance of 378 F g^?1 at 0.25 A g^?1 and an excellent charge/discharge stability (93.7 % capacity retention after 8000 cycles) in aqueous 1 m Na₂SO₄ solution as electrolyte. Moreover, the symmetric supercapacitors that were rationally designed by using 3D MnO/N‐Gr hybrids exhibit outstanding electrochemical performance in an organic electrolyte with an energy density of 90.6 Wh kg^?1 and a power density of 437.5 W kg^?1.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Compositing Amorphous TiO2 with N‐Doped Carbon as High‐Rate Anode Materials for Lithium‐Ion Batteries

Compositing amorphous TiO₂ with nitrogen‐doped carbon through Ti? N bonding to form an amorphous TiO₂/N‐doped carbon hybrid (denoted a‐TiO₂/C? N) has been achieved by a two‐step hydrothermal–calcining method with hydrazine hydrate as an inhibitor and nitrogen source. The resultant a‐TiO₂/C? N hybrid has a surface area as high as 108 m² g^?1 and, when used as an anode material, exhibits a capacity as high as 290.0 mA h g^?1 at a current rate of 1 C and a reversible capacity over 156 mA h g^?1 at a current rate of 10 C after 100 cycles; these results are better than those found in most reports on crystalline TiO₂. This superior electrochemical performance could be ascribed to a combined effect of several factors, including the amorphous nature, porous structure, high surface area, and N‐doped carbon.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

Synthesis of Mesoporous Wall‐Structured TiO2 on Reduced Graphene Oxide Nanosheets with High Rate Performance for Lithium‐Ion Batteries

Mesoporous wall‐structured TiO₂ on reduced graphene oxide (RGO) nanosheets were successfully fabricated through a simple hydrothermal process without any surfactants and annealed at 400 °C for 2 h under argon. The obtained mesoporous structured TiO₂–RGO composites had a high surface area (99 0307 m² g^?1) and exhibited excellent electrochemical cycling (a reversible capacity of 260 mAh g^?1 at 1.2 C and 180 mAh g^?1 at 5 C after 400 cycles), demonstrating it to be a promising method for the development of high‐performance Li‐ion batteries.     

Porous‐Organic‐Framework‐Templated Nitrogen‐Rich Porous Carbon as a More Proficient Electrocatalyst than Pt/C for the Electrochemical Reduction of Oxygen

Porous nitrogen‐rich carbon (POF‐C‐1000) that was synthesized by using a porous organic framework (POF) as a self‐sacrificing host template in a nanocasting process possessed a high degree of graphitization in an ordered structural arrangement with large domains and well‐ordered arrays of carbon sheets. POF‐C‐1000 exhibits favorable electrocatalytic activity for the oxygen‐reduction reaction (ORR) with a clear positive shift of about 40 mV in the onset potential compared to that of a traditional, commercially available Pt/C catalyst. In addition, irrespective of its moderate surface area (785 m² g^?1), POF‐C‐1000 showed a reasonable H₂ adsorption of 1.6 wt % (77 K) and a CO₂ uptake of 3.5 mmol g^?1 (273 K).     

Control of Interpenetration and Gas‐Sorption Properties of Metal–Organic Frameworks by a Simple Change in Ligand Design

In metal–organic framework (MOF) chemistry, interpenetration greatly affects the gas‐sorption properties. However, there is a lack of a systematic study on how to control the interpenetration and whether the interpenetration enhances gas uptake capacities or not. Herein, we report an example of interpenetration that is simply controlled by the presence of a carbon–carbon double or single bond in identical organic building blocks, and provide a comparison of gas‐sorption properties for these similar frameworks, which differ only in their degree of interpenetration. Noninterpenetrated ( SNU‐70 ) and doubly interpenetrated ( SNU‐71 ) cubic nets were prepared by a solvothermal reaction of [Zn(NO₃)₂] ? 6 H₂O in N,N‐diethylformamide (DEF) with 4‐(2‐carboxyvinyl)benzoic acid and 4‐(2‐carboxyethyl)benzoic acid, respectively. They have almost‐identical structures, but the noninterpenetrated framework has a much bigger pore size (ca. 9.0×9.0 Å) than the interpenetrated framework (ca. 2.5×2.5 Å). Activation of the MOFs by using supercritical CO₂ gave SNU‐70′ and SNU‐71′ . The simulation of the PXRD pattern of SNU‐71′ indicates the rearrangement of the interpenetrated networks on guest removal, which increases pore size. SNU‐70′ has a Brunauer–Emmett–Teller (BET) surface area of 5290 m² g^?1, which is the highest value reported to date for a MOF with a cubic‐net structure, whereas SNU‐71′ has a BET surface area of 1770 m² g^?1. In general, noninterpenetrated SNU‐70′ exhibits much higher gas‐adsorption capacities than interpenetrated SNU‐71′ at high pressures, regardless of the temperature. However, at P<1 atm, the gas‐adsorption capacities for N₂ at 77 K and CO₂ at 195 K are higher for noninterpenetrated SNU‐70′ than for interpenetrated SNU‐71′ , but the capacities for H₂ and CH₄ are the opposite; SNU‐71′ has higher uptake capacities than SNU‐70′ due to the higher isosteric heat of gas adsorption that results from the smaller pores. In particular, SNU‐70′ has exceptionally high H₂ and CO₂ uptake capacities. By using a post‐synthetic method, the C?C double bond in SNU‐70 was quantitatively brominated at room temperature, and the MOF still showed very high porosity (BET surface area of 2285 m² g^?1).     

Copper nanoparticles incorporated on a mesoporous carbon nitride,an excellent catalyst in the Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles

Cu nanoparticles with average particles size around 10 nm were incorporated on the surface of a mesoporous carbon nitride support. The XRD and N₂ adsorption isotherms show that it maintains a hexagonal mesoporous structure with a high surface area (600.03 m² g^?1). The embedded Cu nanoparticles exhibit extremely high catalytic performance in two different kinds of organic reactions. The Huisgen 1,3‐dipolar cycloaddition and N‐arylation of N‐heterocycles were all accomplished.     

Preparation and Electrochemical Performance of Li[Ni1/3Co1/3Mn1/3]O2 Synthesized Using Li2CO3 as Template

Porous structure Li[Ni_1/3Co_1/3Mn_1/3]O₂ has been synthesized via a facile carbonate co‐precipitation method using Li₂CO₃ as template and lithium‐source. The physical and electrochemical properties of the materials were examined by many characterizations including TGA, XRD, SEM, EDS, TEM, BET, CV, EIS and galvanostatic charge‐discharge cycling. The results indicate that the as‐synthesized materials by this novel method own a well‐ordered layered structure α‐NaFeO₂ [space group: R‐3m(166)], porous morphology, and an average primary particle size of about 150 nm. The porous material exhibits larger specific surface area and delivers a high initial capacity of 169.9 mAh·g^?1 at 0.1 C (1 C=180 mA·g^?1) between 2.7 and 4.3 V, and 126.4, 115.7 mAh·g^?1 are still respectively reached at high rate of 10 C and 20 C. After 100 charge‐discharge cycles at 1 C, the capacity retention is 93.3%, indicating the excellent cycling stability.     

Periphery-substituted [4+6] salicylbisimine cage compounds with exceptionally high surface areas: influence of the molecular structure on nitrogen sorption properties

The synthesis of various periphery‐substituted shape‐persistent cage compounds by twelve‐fold condensation reactions of four triptycene triamines and six salicyldialdehydes is described, where the substituents systematically vary in bulkiness. The resulting cage compounds were studied as permanent porous material by nitrogen sorption measurements. When the material is amorphous, the steric demand of the cages exterior does not strongly influence the gas uptake, resulting in BET surface areas of approximately 700 m² g^?1 for all cage compounds 3 c – e , independently of the substituents bulkiness. In the crystalline state, materials of the same compounds show a strong interconnection between steric demand of the peripheral substituent and the resulting BET surface area. With increasing bulkiness, the overall BET surface area decreases, for example 1291 m² g^?1 (for cage compound 3 c with methyl substituents), 309 m² g^?1 (for cage compound 3 d with 2‐(2‐ethyl‐pentyl) substituents) and 22 m² g^?1 (for cage compound 3 e with trityl substituents). Furthermore, we found that two different crystalline polymorphs of the cage compound 3 a (with tert‐butyl substituents) differ also in nitrogen sorption, resulting in a BET surface area of 1377 m²g^?1, when synthesized from THF and 2071 m²g^?1, when recrystallized from DMSO.     

Surface and Structural Investigation of a MnOx Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Catalytically active MnO_x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO_x catalysts form without supports in situ under photocatalytic conditions. Our most active ⁴MnO_x catalyst (～0.84 mmol O₂ mol Mn^?1 s^?1) forms from a Mn₄O₄ bearing a metal–organic framework. ⁴MnO_x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m²g^?1) and small regions of crystallinity and layer flexibility. In contrast, the ^SMnO_x formed from Mn²⁺ salt gives an amorphous species of lower surface area (80 m²g^?1) and lower activity (～0.15 mmol O₂ mol Mn^?1 s^?1). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p_3/2 core levels detects enriched Mn³⁺ and Mn²⁺ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.     

Effect of Thermal Treatment on the Textural Properties of CeO2 Powders Synthesized in Near‐ and Supercritical Alcohols

CeO₂ nanocrystals (NCs) have attracted increasing interest over the past few years, in particular for their use in catalytic reactions. Syntheses mediated by near‐ and supercritical alcohols have proven to be innovative ways to obtain CeO₂ NCs with controlled crystallite sizes (from 3 to 8 nm depending on the alcohol) and surface functionalities, with alcohol moieties. When submitted to a thermal treatment at 500 °C, required to desorb/degrade surface organic species, these powders displayed different behaviors depending on the alcohol used during the synthesis. Cerium oxide powders synthesized in sc‐MeOH, sc‐EtOH and sc‐iPrOH undergo sintering during treatment at 500 °C, with a decrease of their specific surface area. Conversely, those synthesized in sc‐BuOH, nc‐PentOH and nc‐HexOH keep their initial crystallite sizes and morphology, but show a great enhancement of their specific surface area (up to 200 m² g^?1), which is unprecedented after such a thermal treatment.     

Hierarchically Porous Carbons Derived from Metal–Organic Framework/Chitosan Composites for High‐Performance Supercapacitors

Hierarchically porous carbon materials with high surface areas are promising candidates for energy storage and conversion. Herein, the facile synthesis of hierarchically porous carbons through the calcination of metal–organic framework (MOF)/chitosan composites is reported. The effects of the chitosan (CS) additive on the pore structure of the resultant carbons are discussed. The corresponding MOF/chitosan precursors could be readily converted into hierarchically porous carbons (NPC‐V, V=1, 2, 4, and 6) with much higher ratios of meso‐/macropore volume to micropore volume (V_meso‐macro/V_micro). The derived carbon NPC‐2 with the high ratio of V_meso‐macro/V_micro=1.47 demonstrates a high specific surface area of 2375 m² g^?1, and a high pore volume of 2.49 cm³ g^?1, as well as a high graphitization degree, in comparison to its counterpart (NPC) without chitosan addition. These excellent features are favorable for rapid ion diffusion/transport, endowing NPC‐2 with enhanced electrochemical behavior as supercapacitor electrodes in a symmetric electrode system, corresponding to a high specific capacitance of 199.9 F g^?1 in the aqueous electrolyte and good rate capability. Good cycling stability is also observed after 10 000 cycles.     

Pyrolysis of Animal Bones with Vitamin B12: A Facile Route to Efficient Transition Metal–Nitrogen–Carbon (TM‐N‐C) Electrocatalysts for Oxygen Reduction

By pyrolyzing cattle bones, hierarchical porous carbon (HPC) networks with a high surface area (2520 m² g^?1) and connected pores were prepared at a low cost and large scale. Subsequent co‐pyrolysis of HPC with vitamin B12 resulted in the formation of three‐dimensional (3D) hierarchically structured porous cobalt–nitrogen–carbon (Co‐N‐HPC) electrocatalysts with a surface area as high as 859 m² g^?1 as well as a higher oxygen reduction reaction (ORR) electrocatalytic activity, better operation stability, and higher tolerance to methanol than the commercial Pt/C catalyst in alkaline electrolyte.     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

One‐Pot Fabrication of Hierarchical Nanosheet‐Based TiO2–Carbon Hollow Microspheres for Anode Materials of High‐Rate Lithium‐Ion Batteries

Hierarchical and hollow nanostructures have recently attracted considerable attention because of their fantastic architectures and tunable property for facile lithium ion insertion and good cycling stability. In this study, a one‐pot and unusual carving protocol is demonstrated for engineering hollow structures with a porous shell. Hierarchical TiO₂ hollow spheres with nanosheet‐assembled shells (TiO₂ NHS) were synthesized by the sequestration between the titanium source and 2,2′‐bipyridine‐5,5′‐dicarboxylic acid, and kinetically controlled etching in trifluoroacetic acid medium. In addition, annealing such porous nanostructures presents the advantage of imparting carbon‐doped functional performance to its counterpart under different atmospheres. Such highly porous structures endow very large specifics surface area of 404 m² g^?1 and 336 m² g^?1 for the as‐prepared and calcination under nitrogen gas. C/TiO₂ NHS has high capacity of 204 mA h g^?1 at 1 C and a reversible capacity of 105 mA h g^?1 at a high rate of 20 C, and exhibits good cycling stability and superior rate capability as an anode material for lithium‐ion batteries.     

High CO2‐Capture Ability of a Porous Organic Polymer Bifunctionalized with Carboxy and Triazole Groups

A new porous organic polymer, SNU‐C1 , incorporating two different CO₂‐attracting groups, namely, carboxy and triazole groups, has been synthesized. By activating SNU‐C1 with two different methods, vacuum drying and supercritical‐CO₂ treatment, the guest‐free phases, SNU‐C1‐va and SNU‐C1‐sca , respectively, were obtained. Brunauer–Emmett–Teller (BET) surface areas of SNU‐C1‐va and SNU‐C1‐sca are 595 and 830 m²g^?1, respectively, as estimated by the N₂‐adsorption isotherms at 77 K. At 298 K and 1 atm, SNU‐C1‐va and SNU‐C1‐sca show high CO₂ uptakes, 2.31 mmol g^?1 and 3.14 mmol g^?1, respectively, the high level being due to the presence of abundant polar groups (carboxy and triazole) exposed on the pore surfaces. Five separation parameters for flue gas and landfill gas in vacuum‐swing adsorption were calculated from single‐component gas‐sorption isotherms by using the ideal adsorbed solution theory (IAST). The data reveal excellent CO₂‐separation abilities of SNU‐C1‐va and SNU‐C1‐sca , namely high CO₂‐uptake capacity, high selectivity, and high regenerability. The gas‐cycling experiments for the materials and the water‐treated samples, experiments that involved treating the samples with a CO₂‐N₂ gas mixture (15:85, v/v) followed by a pure N₂ purge, further verified the high regenerability and water stability. The results suggest that these materials have great potential applications in CO₂ separation.     

Controlling the BET Surface Area of Porous Carbon by Using the Cd/C Ratio of a Cd–MOF Precursor and Enhancing the Capacitance by Activation with KOH

Herein, four new cadmium metal–organic frameworks (Cd–MOFs), [Cd(bib)(bdc)]_∞ ( 1 ), [Cd(bbib)(bdc)(H₂O)]_∞ ( 2 ), [Cd(bibp)(bdc)]_∞ ( 3 ), and [Cd₂(bbibp)₂(bdc)₂(H₂O)]_∞ ( 4 ), have been constructed from the reaction of Cd(NO₃)₂ ? 4 H₂O with 1,4‐benzenedicarboxylate (H₂bdc) and structure‐related bis(imidazole) ligands (1,4‐bis(imidazol‐1‐yl)benzene (bib), 1,4‐bis(benzoimidazol‐1‐yl)benzene (bbib), 4,4′‐bis(imidazol‐1‐yl)biphenyl (bibp), and 4,4′‐bis(benzoimidazol‐1‐yl)biphenyl (bbibp)) under solvothermal conditions. Cd–MOF 1 shows a 2D (4,4) lattice with parallel interpenetration, whereas 2 displays an interesting 3D interpenetrating dia network, 3 exhibits an unusual 3D interpenetrating dmp network, and 4 presents a 3D self‐catenated pillar‐layered framework with a Schäfli symbol of [4³ ? 6³]₂ ? [4⁶ ? 6¹⁶ ? 8⁶]. The structural diversity indicates that the backbone of the bis(imidazole) ligand (including the terminal group and spacer) plays a crucial role in the assembly of mixed‐ligand frameworks. By using the pore‐forming effect of cadmium vapor, for the first time we have utilized these Cd–MOFs as precursors to further prepare porous carbon materials (PCs) in a calcination–thermolysis procedure. These PCs show different porous features that correspond to the topological structures of Cd–MOFs. Significantly, it was found that the specific surface area and capacitance of PCs are tuned by the Cd/C ratio of the MOF. Furthermore, the as‐synthesized PCs were processed with KOH to obtain activated porous carbon materials (APCs) with higher specific surface area and porosity, which greatly promoted the energy‐storage capacity. After full characterization, we found that APC‐bib displays the largest specific surface area (1290 m² g^?1) and total pore volume (1.37 cm³ g^?1) of this series of carbon materials. Consequently, APC‐bib demonstrates the highest specific capacitance of 164 F g^?1 at a current density of 0.5 A g^?1, and also excellent retention of capacitance (≈89.4 % after 5000 cycles at 1 A g^?1). Therefore, APC‐bib has great potential as the electrode material in a supercapacitor.     

Preparation and Characterization of Mesoporous Ce0.5Zr0.5O2 Mixed Oxide

Mesoporous （MSU） Ce0.5Zr0.5O2 mixed oxide with a high specific surface area has been synthesized under weak acidic condition in the presence of an anionic surfactant, sodium dodecylbenzenesulfonate. The effect of the pH value on the formation of mesostructure and the thermal stability of the material has been evaluated. The products were characterized by transmission electron microscopy, powder X-ray diffraction and nitrogen adsorption-desorption measurements. The results showed that the as-prepared Ce0.5Zr0.5O2 mixed oxide possessed a specific surface area of 163.3 m^2·g^-1, which had a cubic fluorite-type structure and possessed specific surface areas of 148.4 and 62.4 m^2·g^-1 after calcination at 500 and 800 ℃ for 2 h, respectively. The material showed excellent thermal stability.     

No More HF: Teflon‐Assisted Ultrafast Removal of Silica to Generate High‐Surface‐Area Mesostructured Carbon for Enhanced CO2 Capture and Supercapacitor Performance

An innovative technique to obtain high‐surface‐area mesostructured carbon (2545 m² g^?1) with significant microporosity uses Teflon as the silica template removal agent. This method not only shortens synthesis time by combining silica removal and carbonization in a single step, but also assists in ultrafast removal of the template (in 10 min) with complete elimination of toxic HF usage. The obtained carbon material (JNC‐1) displays excellent CO₂ capture ability (ca. 26.2 wt % at 0 °C under 0.88 bar CO₂ pressure), which is twice that of CMK‐3 obtained by the HF etching method (13.0 wt %). JNC‐1 demonstrated higher H₂ adsorption capacity (2.8 wt %) compared to CMK‐3 (1.2 wt %) at ?196 °C under 1.0 bar H₂ pressure. The bimodal pore architecture of JNC‐1 led to superior supercapacitor performance, with a specific capacitance of 292 F g^?1 and 182 F g^?1 at a drain rate of 1 A g^?1 and 50 A g^?1, respectively, in 1 m H₂SO₄ compared to CMK‐3 and activated carbon.