Multi‐Light‐Responsive Quantum Dot Sensitized Hybrid Micromotors with Dual‐Mode Propulsion

CdS quantum dots/C₆₀ tubular micromotors with chemical/multi‐light‐controlled propulsion and “on‐the‐fly” acceleration capabilities are described. In situ growth of CdS quantum dots on the outer fullerene layer imparts this layer with light‐responsive properties in connection to inner Pt, Pd or MnO₂ layers. This is the first time that visible light is used to drive bubble‐propelled tubular micromotors. The micromotors exhibit a broad absorption range from 320 to 670 nm and can be wirelessly controlled by modulating light intensity and peroxide concentration. The built‐in accelerating optical system allows for the control of the velocity over the entire UV/Vis light spectra by modulating the catalyst surface chemistry. The light‐responsive properties have been also exploited to accelerate the chemical dealloying and propulsion of micromotors containing a Cu/Pd layer. Such dual operated hybrid micromotors hold considerable promise for designing smart micromachines for on‐demand operations, motion‐based sensing, and enhanced cargo transportation.     

Chemical/Light‐Powered Hybrid Micromotors with “On‐the‐Fly” Optical Brakes

Hybrid micromotors capable of both chemically powered propulsion and fuel‐free light‐driven actuation and offering built‐in optical brakes for chemical propulsion are described. The new hybrid micromotors are designed by combining photocatalytic TiO₂ and catalytic Pt surfaces into a Janus microparticle. The chemical reactions on the different surfaces of the Janus particle hybrid micromotor can be tailored by using chemical or light stimuli that generate counteracting propulsion forces on the catalytic Pt and photocatalytic TiO₂ sides. Such modulation of the surface chemistry on a single micromotor leads to switchable propulsion modes and reversal of the direction of motion that reflect the tuning of the local ion concentration and hence the dominant propulsion force. An intermediate Au layer (under the Pt surface) plays an important role in determining the propulsion mechanism and operation of the hybrid motor. The built‐in optical braking system allows “on‐the‐fly” control of the chemical propulsion through a photocatalytic reaction on the TiO₂ side to counterbalance the chemical propulsion force generated on the Pt side. The adaptive dual operation of these chemical/light hybrid micromotors, associated with such control of the surface chemistry, holds considerable promise for designing smart nanomachines that autonomously reconfigure their propulsion mode for various on‐demand operations.     

“Push‐pull” supramolecular chromophores supported on cyclopolymers

Well‐defined macromolecules have been obtained through free‐radical cyclopolymerization and cyclocopolymerization of difunctional and acrylic‐like monomers, which contained “push‐pull” supramolecular chromophores, able to form 1:1 complexes with Eu³⁺ ions in solution. The monomeric molecular modules are built around bismalonate crown ethers in a convergent fashion, in which one of the malonate moiety is derivatized as the ylidene malonate push‐pull fragment, and the other malonate moiety is elaborated to introduce two polymerizable and acrylic‐like substituents. The free‐radical induced cyclopolymerization of these monomers, or their cyclocopolymerization with UV/Vis “silent” but structurally related monomers, afforded macromolecular architectures characterized by GPC, NMR and DSC techniques. UV/Vis titration studies, performed with Eu(OTf)₃ as the supramolecular probe, revealed how adjacent chromophores within the polymeric backbone are virtually independent from each other, and how the binding ability towards the probe of these multivalent, highly packed cyclopolymeric architectures, although reduced, is still clearly detectable. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5202–5213, 2008     

Variable Reactivity of a N‐Heterocyclic Phosphenium Complex: P−C Bond Activation or “Abnormal” Deprotonation

The reaction of an N‐heterocyclic phosphenium complex of manganese with MeLi/Et₃NHCl under formal addition of CH₄ to the Mn=P double bond can be reversed upon UV photolysis, providing a rare example for selective P−C(alkyl) bond activation. Action of LDA on the phosphenium complex does not proceed via attack at phosphorus but rather via C4‐deprotonation to yield a unique P‐analogue of an “abnormal” carbene. A transmetalation product of the original complex was fully characterized. The C‐metalation is also applicable to bis‐phosphenium complexes of other metals.     

Ruthenium Complex “Light Switches” that are Selective for Different G‐Quadruplex Structures

Recognition and regulation of G‐quadruplex nucleic acid structures is an important goal for the development of chemical tools and medicinal agents. The addition of a bromo‐substituent to the dipyridylphenazine (dppz) ligands in the photophysical “light switch”, [Ru(bpy)₂dppz]²⁺, and the photochemical “light switch”, [Ru(bpy)₂dmdppz]²⁺, creates compounds with increased selectivity for an intermolecular parallel G‐quadruplex and the mixed‐hybrid G‐quadruplex, respectively. When [Ru(bpy)₂dppz‐Br]²⁺ and [Ru(bpy)₂dmdppz‐Br]²⁺ are incubated with the G‐quadruplexes, they have a stabilizing effect on the DNA structures. Activation of [Ru(bpy)₂dmdppz‐Br]²⁺ with light results in covalent adduct formation with the DNA. These complexes demonstrate that subtle chemical modifications of Ru^II complexes can alter G‐quadruplex selectivity, and could be useful for the rational design of in vivo G‐quadruplex probes.     

Developing A “Polysulfide‐Phobic” Strategy to Restrain Shuttle Effect in Lithium–Sulfur Batteries

Inspired by hydrophobic interface, a novel design of “polysulfide‐phobic” interface was proposed and developed to restrain shuttle effect in lithium–sulfur batteries. Two‐dimensional VOPO₄ sheets with adequate active sites were employed to immobilize the polysulfides through the formation of a V?S bond. Moreover, owing to the intrinsic Coulomb repulsion between polysulfide anions, the surface anchored with polysulfides can be further evolved into a “polysulfide‐phobic” interface, which was demonstrated by the advanced time/space‐resolved operando Raman evidences. In particular, by introducing the “polysulfide‐phobic” surface design into separator fabrication, the lithium–sulfur battery performed a superior long‐term cycling stability. This work expands a novel strategy to build a “polysulfide‐phobic” surface by “self‐defense” mechanism for suppressing polysulfides shuttle, which provides new insights and opportunities to develop advanced lithium–sulfur batteries.     

“Sandglass”‐Shaped Self‐Assembly of Coil–rod–coil Triblock Copolymer Containing Rigid Aniline‐Pentamer

The amphiphilic PEG_{1 500}‐b‐EM AP‐b‐PEG_{1 500} (EM PAP) triblock copolymer of poly(ethylene glycol) (PEG) and emeraldine aniline‐pentamer (EM AP) in its concentrated solution can self‐assemble into a special shape like “sandglass”, as observed by transmission electron microscopy (TEM), field emission scanning electron microscopy (ESEM) and atomic force microscopy (AFM). This “sandglass”‐shaped assembly is composed of several “rods” aggregated in the middle, with every “rod” being about 8 µm in length and 300 nm in diameter. We conclude that the special “sandglass”‐shaped assembly may come into being because of the inducement effect of the crystallization of EM AP segments, by studying electron diffraction (ED) results and wide‐angle X‐ray diffusion (WAXD) characterization of the EM PAP triblock copolymer.

     

Synthesis of novel asymmetric dendritic‐linear‐dendritic block copolymers via “living” anionic polymerization of ethylene oxide initiated by dendritic macroinitiators

The first synthesis of asymmetric dendritic‐linear‐dendritic ABC block copolymers, that contain a linear B block and dissimilar A and C dendritic fragments is reported. Third generation poly(benzyl ether) monodendrons having benzyl alcohol moiety at their “focal” point were activated by quantitative titration with organometallic anions and the resulting alkoxides were used as initiators in the “living” ring‐opening polymerization of ethylene oxide. The reaction proceeded in controlled fashion at 40–50 °C affording linear‐dendritic AB block copolymers with predictable molecular weights (M_w = 6000–13,000) and narrow molecular weight distributions (M_w/M_n = 1.02–1.04). The propagation process was monitored by size‐exclusion chromatography with multiple detection. The resulting “living” copolymers were terminated by reaction either with HCl/tetrahydrofuran or with a reactive monodendron that differed from the initiating dendron not only in size, but also in chemical composition. The asymmetric triblock copolymers follow a peculiar structure‐induced self‐assembly pattern in block‐selective solvents as evidenced by size‐exclusion chromatography in combination with multi‐angle light scattering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5136–5148, 2007     

Micromotor‐Based Energy Generation

A micromotor‐based strategy for energy generation, utilizing the conversion of liquid‐phase hydrogen to usable hydrogen gas (H₂), is described. The new motion‐based H₂‐generation concept relies on the movement of Pt‐black/Ti Janus microparticle motors in a solution of sodium borohydride (NaBH₄) fuel. This is the first report of using NaBH₄ for powering micromotors. The autonomous motion of these catalytic micromotors, as well as their bubble generation, leads to enhanced mixing and transport of NaBH₄ towards the Pt‐black catalytic surface (compared to static microparticles or films), and hence to a substantially faster rate of H₂ production. The practical utility of these micromotors is illustrated by powering a hydrogen–oxygen fuel cell car by an on‐board motion‐based hydrogen and oxygen generation. The new micromotor approach paves the way for the development of efficient on‐site energy generation for powering external devices or meeting growing demands on the energy grid.     

Direct synthesis of terminally “clickable” linear and hyperbranched polyesters

1,3‐Dipolar cycloaddition of an organic azide and an acetylenic unit, often referred to as the “click reaction”, has become an important ligation tool both in the context of materials chemistry and biology. Thus, development of simple approaches to directly generate polymers that bear either an azide or an alkyne unit has gained considerable importance. We describe here a straightforward approach to directly prepare linear and hyperbranched polyesters that carry terminal propargyl groups. To achieve the former, we designed an AB‐type monomer that carries a hydroxyl group and a propargyl ester, which upon self‐condensation under standard transesterification conditions yielded a polyester that carries a single propargyl group at one of its chain‐ends. Similarly, an AB₂ type monomer that carries one hydroxyl group and two propargyl ester groups, when polymerized under the same conditions yielded a hyperbranched polymer with numerous “clickable” propargyl groups at its molecular periphery. These propargyl groups can be readily clicked with different organic azides, such as benzyl azide, ω‐azido heptaethyleneglycol monomethylether or 9‐azidomethyl anthracene. When an anthracene chromophore is clicked, the molecular weight of the linear polyester could be readily estimated using both UV–visible and fluorescence spectroscopic measurements. Furthermore, the reactive propargyl end group could also provide an opportunity to prepare block copolymers in the case of linear polyesters and to generate nanodimensional scaffolds to anchor a variety of functional units, in the case of the hyperbranched polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3200–3208, 2010     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

Synthesis of a Novel Oligoaniline: “Dumbbell‐Shaped” Oligoaniline

Summary: A new kind of aniline oligomer with a “dumbbell” shape was synthesized through a simple oxidative coupling reaction with a new rigid aromatic amine as starting material. The oligomer was characterized with mass spectrometry, IR and NMR spectroscopies. Its redox property was checked by cyclic voltammetry and chemical oxidation/reduction process was monitored by UV spectroscopy. We found it has a reversible electrochemical property like common oligoanilines. Combined with its well‐defined structure, it is expected to act as a model compound for a molecular electronic switch.

The “dumbbell‐shaped” oligoaniline compound synthesized here.     

On the “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory”

After having reviewed some pioneer integral approximations closely related to Rüdenberg's expansions of one‐ and two‐electron orbital products, we apply the previously described “Implicit Multi‐Center Integration” techniques on Roothaan's “restricted” Fock‐matrix components over standard atomic orbital bases. The resulting compact forms are very similar to the well‐known “Wolfsberg–Helmholz Conjecture” of “Extended‐Hückel Theory,” which relates the various off‐diagonal matrix elements of “restricted” Fock‐type to their corresponding diagonal counterparts. In this way, a “nonempirical Extended‐Hückel Theory” can be created. © 2012 Wiley Periodicals, Inc.     

Semi‐rigid polyesters analysed using the “strong‐fragile” concept

Semi‐rigid polyesters from diphenyl dicarbonic acid and some branched propyl and butyl spacers have been investigated using Differential Scanning Calorimetry. From Δc_p at Tg and the determination of the fragility index m, we studied the “strong‐fragile” behaviour of these materials. All the samples appear thermodynamically “strong” and “kinetically” fragile. A comparison of these results with those obtained from glass‐forming liquids leading to linear polymers ‐ such as PET, PCT, PEN or poly‐methyl (α‐n‐alkyl) acrylates ‐ shows that a modification of the polymer rigidity leads to change the fragility index m and the Δc_p at the glass transition.     

Photoconductive Curved‐Nanographene/Fullerene Supramolecular Heterojunctions

This study presents synthesis and characterizations of two novel curved nanographenes that strongly bind with fullerene C₆₀ to form photoconductive heterojunctions. Films of the self‐assembled curved nanographene/fullerene complexes, which served as the photoconductive layer, generated a significant photocurrent under light irradiation. Gram‐scale quantities of these curved nanographenes (TCR and HCR) as the “crown” sidewalls can be incorporated into a carbon nanoring to form molecular crowns, and the molecular structure of C₆₀@TCR is determined by single‐crystal X‐ray diffraction. The UV/Vis absorption and emission spectra, and theoretical studies revealed their unique structural features and photophysical properties. Time‐resolved spectroscopic results clearly suggest fast photoinduced electron transfer process in the supramolecular heterojunctions.     

Macrocyclization of polymers via ring‐closing metathesis and azide/alkyne‐“click”‐reactions: An approach to cyclic polyisobutylenes

The end‐to‐end cyclization of telechelic polyisobutylenes (PIB's) toward cyclic polyisobutylenes is reported, using either ring‐closing metathesis (RCM) or the azide/alkyne‐“click”‐reaction. The first approach uses bisallyl‐telchelic PIB's (M_n = 1650, 3680, 9770 g mol^?1) and Grubbs 1st‐, 2nd‐, and 3rd‐generation catalyst leading to cyclic PIB's in 60–80% yield, with narrow polydispersities (M_w/M_n = 1.25). Azide/alkyne‐“click”‐reactions of bisalkyne‐telechelic PIB's (M_n = 3840 and 9820 g mol^?1) with excess of 1,11‐diazido‐undecane leads to the formation of mixtures of linear/cyclic PIB's under formation of oligomeric cycles. Subsequent reaction of the residual azide‐moieties in the linear PIB's with excess of alkyne‐telechelic PEO enables the chromatographic removal of the resulting linear PEO‐PIB‐block copolymers by column chromatography. Thus pure cyclic PIB's can be obtained using this double‐“click”‐method, devoid of linear contaminants. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 671–680, 2010     

Visible‐Light‐Driven Janus Microvehicles in Biological Media

A light‐driven multifunctional Janus micromotor for the removal of bacterial endotoxins and heavy metals is described. The micromotor was assembled by using the biocompatible polymer polycaprolactone for the encapsulation of CdTe or CdSe@ZnS quantum dots (QDs) as photoactive materials and an asymmetric Fe₃O₄ patch for propulsion. The micromotors can be activated with visible light (470–490 nm) to propel in peroxide or glucose media by a diffusiophoretic mechanism. Efficient propulsion was observed for the first time in complex samples such as human blood serum. These properties were exploited for efficient endotoxin removal using lipopolysaccharides from Escherichia coli O111:B4 as a model toxin. The micromotors were also used for mercury removal by cationic exchange with the CdSe@ZnS core–shell QDs. Cytotoxicity assays in HeLa cell lines demonstrated the high biocompatibility of the micromotors for future detoxification applications.     

Using “Threading Followed by Shrinking” to Synthesize Highly Stable Dialkylammonium‐Ion‐Based Rotaxanes

Herein, we report a “threading followed by shrinking” approach for the synthesis of rotaxanes by using an “oxygen‐deficient” macrocycle that contained two arylmethyl sulfone units and the dumbbell‐shaped salt bis(3,5‐dimethylbenzyl)ammonium tetrakis(3,5‐trifluoromethylphenyl)borate as the host and guest components, respectively. The extrusion of SO₂ from both of the arylmethyl sulfone units of the macrocyclic component in the corresponding [2]pseudorotaxane resulted in a [2]rotaxane that was sufficiently stable to maintain its molecular integrity in CD₃SOCD₃ at 393 K for at least 5 h.     

Über die bei hohen Ansäuerungsgraden auftretenden Polymolybdat-Typen,insbesondere zur Frage der „Dekamolybdate”︁ und „Phase C”︁-Polymolybdate

On the Polymolybdate Types Occurring at High Degrees of Acidification, with Particular Reference to the “Decamolybdates” and “Phase C” Polymolybdates It is shown that in the range of high acidification (> 1.6H⁺/MoO₄^2?) of aqueous molybdate solutions only two types of solid polymolybdates occur, namely the 36-molybdate and the “decamolybdate” types. These types can be most conveniently identified by their Raman spectra and also by some other characteristics. All the other polymolybdate types proposed in the literature for this range of acidification (“hexamolybdates”, “octamolybdates”, “dodecamolybdates”, “16-molybdates”, a 19-molybdate, the large group of polymolybdates characterized by a wide range of b in the general formula M₂O · bMoO₃ · cH₂O, “phase C” polymolybdates, a “hexagonal hydrate of molybdenum trioxide”, a “reactive molybdic acid”, “NH₃(MoO₃)₃”, and others) can be assigned to one of these two types. The most important reason for the erroneous assignments in the literature is the isomorphous exchange of varying quantities of the alkali or alkaline earth metal cations by H₃O⁺ in the crystal structure, occurring in the highly acidic solutions, particularly with the small cations. This cannot be recognized by the presently available methods of investigation and, hence, leads to the creation of new polymolybdate types. Another reason causing some of the confusion is the assignment of virtually identical X-ray diffraction data to two different types of lattices, a hexagonal and cubic lattice.