Dual‐signal amplification strategy for ultrasensitive chemiluminescence detection of PDGF–BB in capillary electrophoresis

Many efforts have been made toward the achievement of high sensitivity in capillary electrophoresis coupled with chemiluminescence detection (CE‐CL). This work describes a novel dual‐signal amplification strategy for highly specific and ultrasensitive CL detection of human platelet‐derived growth factor–BB (PDGF–BB) using both aptamer and horseradish peroxidase (HRP) modified gold nanoparticles (HRP–AuNPs–aptamer) as nanoprobes in CE. Both AuNPs and HRP in the nanoprobes could amplify the CL signals in the luminol–H₂O₂ CL system, owing to the excellent catalytic behavior of AuNPs and HRP in the CL system. Meanwhile, the high affinity of aptamer modified on the AuNPs allows detection with high specificity. As proof‐of‐concept, the proposed method was employed to quantify the concentration of PDGF–BB from 0.50 to 250 fm with a detection limit of 0.21 fm. The applicability of the assay was further demonstrated in the analysis of PDGF–BB in human serum samples with acceptable accuracy and reliability. The result of this study exhibits distinct advantages, such as high sensitivity, good specificity, simplicity, and very small sample consumption. The good performances of the proposed strategy provide a powerful avenue for ultrasensitive detection of rare proteins in biological sample, showing great promise in biochemical analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Immunoassay of plasmonic gold‐nanoparticle clusters: Plasmon coupling effects for Parkinson biomarker detection

A simple signal‐on plasmonic optical assay for the detection of the Parkinson biomarker using gold‐nanoparticle clusters (AuNCs) for signal amplification is presented. This approach is based on the improvement of the optical density (OD) change of the plasmonic band of a localized surface plasmon resonance (LSPR) Au nanoparticle (AuNP) sensor interface using Au NCs conjugated antibodies. The amplification results in a 260‐fold improvement in concentration detection, from 1,000 ng/mL (unlabeled antibody) to 3.8 ng/mL (antibody‐conjugated AuNCs). The sensitivity enhancement can be ascribed to the further plasmonic coupling between the antibody‐conjugated AuNCs and the AuNPs on the LSPR interface and the enhanced amount of target molecule bound to the bioassay. This AuNCs‐assisted signal amplification strategy allows for improving the sensitivity of the plasmon‐based bioassays and can be extended to other optical‐based diagnostic technologies. Importantly, the simple detecting procedure and protocol assembly make it competitive with other existing sensing technologies such as ELISA, allowing for practical usage in clinical diagnostics.     

Horseradish peroxidase and aptamer dual-functionalized nanoprobe for the amplification detection of alpha-methylacyl-CoA racemase

Alpha-methylacyl-CoA racemase (AMACR) is over-expressed in many cancer types and can serve as a novel diagnostic biomarker. Development of convenient and sensitive detection methods of AMACR is of particular importance for cancer diagnosis. Aptamers are a type of recognition elements, which possess many advantages over antibody, making them suitable for applications in biosensing and biotechnology. In this work, we use the efficient surface modification of gold nanoparticles (AuNPs) to prepare the horseradish peroxidase (HRP) and aptamer dual-functionalized nanoprobe. The immobilization of HRP and thiol-terminated aptamer on the surface of AuNPs can be achieved through electrostatic interaction and the formation of Au–S bond, respectively. This nanoprobe, which is used as discriminating and catalytic probe, can be combined with enzyme immunoassay method to increase the detection sensitivity of AMACR. The detection limit can reach as low as 4.6 pg mL⁻¹ due to the dual signal amplification from enzymatic cycling and the high loading of enzymes on AuNPs. This sensitivity is about three orders of magnitude higher than that of AMACR aptamer based fluorescence method, which is also comparable to or one order of magnitude higher than that of ELISA. Furthermore, this method is more simple and effective, which not only avoids the conjugation between recognition element and the catalytic enzyme, but also achieves greater signal amplification. This assay could be used as a sensitive and selective platform for the detection of target protein.     

A Prostate Specific Antigen Immunosensor Based on Biotinylated‐Antibody/Cyclodextrin Inclusion Complex: Fabrication and Electrochemical Studies

Immobilization of biomolecules with a proper orientation is considered as a basis for diverse biotechnological applications. Herein, we report a host‐guest inclusion complexation between β‐cyclodextrin (β‐CD) and biotin as a versatile approach for the immobilization of biomolecules. As a practical application, a sandwich‐type electrochemical immunosensor was designed for the determination of prostate specific antigen (PSA). The immunosensor was fabricated by in situ electropolymerization of poly(N‐acetylaniline) onto a rGO‐modified Pt electrode. Then, β‐CD was covalently grafted onto the over‐oxidized polymer backbone. For improving the efficiency of the assay, AuNPs were casted on the polymeric film, on the surface of which thionine (TH) as an electron mediator was covalently immobilized. Using a host‐guest inclusion complexation between β‐CD and biotin, a β‐CD/biotin‐Ab₁/PSA/Ab₂‐horseradish peroxidase (HRP) sandwich was formed on the electrode surface. The analytical signal was produced via electrochemical reduction of TH_ox, generated by biocatalytic oxidation of the TH_red in the presence of HRP/H₂O₂. Under optimal conditions, the proposed sensor responded linearly to PSA in the range from 10.0 pg mL⁻¹ to 25.0 ng mL⁻¹, with a low detection limit of 6.7 pg mL⁻¹ (S/N=3). Kinetic parameters of the interaction of β‐CD with Ab₁ were also investigated. Finally, the applicability of the immunosensor was successfully investigated for the detection of PSA in human serum samples.     

Electrochemical Immunoassay of E. coli in Urban Sludge Using Electron Mediator-mediated Enzymatic Catalysis and Gold Nanoparticles for Signal Amplification

An electrochemical immunosensor was developed for sensitive assay of E. coli in urban sludge, in which electron mediator-mediated enzymatic catalysis and gold nanoparticles(AuNPs) were utilized for signal amplification. The immnuosensing platform chitosan-thionine(chit-thio)/poly(amidoamine) dendrimer-encapsulated AuNPs [PAMAM(Au)] composites were first prepared from chit-thio and PAMAM(Au) using the layer-by-layer method to provide a matrix for high-stability and high-bioactivity bindings of the capture antibody(_cAb). Moreover, the {_dAb-AuNPs-HRP} nanoprobes were designed to exploit the amplification effect of the carrier AuNPs due to the loading amounts of horseradish peroxidase(HRP) and the detection antibody(_dAb). The sandwich-type immunoassay was then successfully used to assay E. coli based on the oxidation of thionine as a result of H₂O₂-induced enzymatic catalytic reaction by HRP. This study presents a powerful tool in electrochemical immunoassay for E. coli detection with rapid response, high-sensitivity and high-specificity, providing a potential new tool for feasibility assessment of sludge recycle.     

A new dual immunoassay for tumor markers based on chemiluminescence signal amplification by magnetic mesoporous silica and enzyme modified gold nanoparticles

A sensitive dual immunoassay was proposed for the determination of carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) based on signal amplification. Monoclonal antibodies immobilized on magnetic mesoporous silica particles (Fe(3)O(4)/SiO(2)) were prepared as the primary probe. Horseradish peroxidase (HRP) labeled antibodies co-coated with HRP on gold nanoparticles (AuNPs) were used as the secondary probe to achieve signal amplification. HRP tags were retained in the flow cells after a sandwich immunoassay. By controlling two switches on the two channels, chemiluminescent substrates were injected orderly man way, and then signals for CEA and AFP were sequentially detected by HRP-luminol-H(2)O(2). Due to the increased amount of HRP on AuNPs and the increased amount of monoclonal antibodies on Fe(3)O(4)/SiO(2), the signals were largely amplified. Under the optimal conditions, CEA and AFP could be detected in the linear ranges of 1.0 - 80 and 1.0 - 75 ng mL(-1) with detection limits of 0.25 and 0.5 ng mL(-1), respectively.     

Aptamer‐based detection and quantitative analysis of human immunoglobulin E in capillary electrophoresis with chemiluminescence detection

A novel aptamer‐based CE with chemiluminescence (CL) assay was developed for highly sensitive detection of human immunoglobulin E (IgE). The IgE aptamer was conjugated with gold nanoparticles (AuNPs) to form AuNPs‐aptamer that could specifically recognize the IgE to produce an AuNPs‐aptamer‐IgE complex. The mixture of the AuNPs‐aptamer‐IgE complex and the unbounded AuNPs‐aptamer could be effectively separated by CE and sensitively detected with luminol‐H₂O₂ CL system. By taking the advantage of the excellent catalytic behavior of AuNPs on luminol‐H₂O₂ CL system, the ultrasensitive detection of IgE was achieved. The detection limit of IgE is 7.6 fM (S/N = 3) with a linear range from 0.025 to 250 pM. Successful detection of IgE in human serum samples was demonstrated and the recoveries of 94.9–103.2% were obtained. The excellent assay features of the developed approach are its specificity, sensitivity, adaptability, and very small sample consumption. Our design provides a methodology model for determination of rare proteins in biological samples.     

Combination of Mass Signal Amplification and Isotope‐Labeled Alkanethiols for the Multiplexed Detection of miRNAs

We report a fast and sensitive method for the multiplexed detection of miRNAs by combining mass signal amplification and isotope‐labeled signal reporter molecules. In our strategy, target miRNAs are captured specifically by immobilized DNAs on gold nanoparticles (AuNPs), which carry a large number of small molecules, called amplification tags (Am‐tags), as the reporter for the detection of target miRNAs. For multiplexed detection, we designed and synthesized four Am‐tags containing 0, 4, 8, 12 isotopes so that they had same molecular properties but different molecular weights. By observing the mass signals of the Am‐tags on AuNPs decorated along with different probe DNAs, four types of miRNAs in a sample could be easily discriminated, and the relative amounts of these miRNAs could be quantified. The practicability of our strategy was further verified by measuring the expression levels of two miRNAs in HUVECs in response to different CuSO₄ concentrations.     

基于酶标抗体和媒介体共吸附于金胶壳聚糖膜的PSA免疫传感器的制备

本文研制了一种用金胶壳聚糖仿生膜来同时固定四甲基联苯胺（TMB）和酶标抗体的新型电化学免疫传感器,用于检测血清肿瘤标志物前列腺特异性抗原（PSA）的含量。固定的TMB作为电子传递媒介体,在扫速小于45 mV/s时,电极表现为一个表面控制过程,而在扫速大于45 mV/s时则表现为一个扩散控制过程。将固定有酶标抗体和TMB的免疫传感器与待测PSA抗原一起培育,在该传感器上形成的免疫复合物通过TMB-H₂O₂-HRP电化学体系进行了测定。在优化实验条件下,PSA的线性检测范围为5-30 ng·mL^-1,检测限为1.0 ng·mL^-1。该PSA免疫传感器制备方法简单,成本低廉,具有较好的稳定性和重现性。     

An ultrasensitive chemiluminescence immunosensor for PSA based on the enzyme encapsulated liposome

A highly sensitive chemiluminescence immunosensor for the detection of prostate-specific antigen (PSA) was developed based on a novel amplification procedure with the application of enzyme encapsulated liposome. Horseradish peroxidase (HRP) encapsulated and antibody-modified liposome acts as the carrier of a large number of markers and specific recognition label for the amplified detection of PSA. In the detection of PSA, the analyte was first bound to the specific capture antibody immobilized on the microwell plates, and then sandwiched by the antibody-modified liposomes encapsulating HRP. The encapsulated markers, HRP molecules were released by the lysis of the specifically bound liposomes in the microwell with Triton X-100 solution. Then, the analyte PSA could be determined via the chemiluminescence signal of HRP-catalyzed luminol/peroxide/enhancer system. The “sandwich-type” immunoassay provides the amplification route for the PSA detection in ultratrace levels. The CL emission intensity exhibits dynamic correlation to PSA concentration in the range from 0.74 pg/ml to 0.74 μg/ml with readily achievable detection limit of 0.7 pg/ml.     

Ultrasensitive SERS Detection of Lysozyme by a Target‐Triggering Multiple Cycle Amplification Strategy Based on a Gold Substrate

An ultrasensitive surface enhanced Raman scattering (SERS) method has been designed to selectively and sensitively detect lysozyme. The gold chip as the detection substrate, the aptamer‐based target‐triggering cascade multiple cycle amplification, and gold nanoparticles (AuNPs) bio‐barcode Raman probe enhancement on the gold substrate are employed to enhance the SERS signals. The cascade amplification process consists of the nicking enzyme signaling amplification (NESA), the strand displacement amplification (SDA), and the circular‐hairpin‐assisted exponential amplification reaction (HA‐EXPAR). With the involvement of an aptamer‐based probe, two amplification reaction templates, and a Raman probe, the whole circle amplification process is triggered by the target recognition of lysozyme. The products of the upstream cycle (NESA) could act as the “DNA trigger” of the downstream cycle (SDA and circular HA‐EXPAR) to generate further signal amplification, resulting in the immobility of abundant AuNPs Raman probes on the gold substrate. “Hot spots” are produced between the Raman probe and the gold film, leading to significant SERS enhancement. This detection method exhibits excellent specificity and sensitivity towards lysozyme with a detection limit of 1.0×10^?15 M . Moreover, the practical determination of lysozyme in human serum demonstrates the feasibility of this SERS approach in the analysis of a variety of biological specimens.     

A Sandwich‐Type Electrochemical Biosensor for Detection of BCR/ABL Fusion Gene Using Locked Nucleic Acids on Gold Electrode

In this study, a sandwich‐type electrochemical enzyme‐based LNA‐modified DNA biosensor was developed to detect relative gene in chronic Myelogenous Leukemia first. This biosensor is based on a ‘sandwich’ detection strategy, which involves a pair of probes (a capture probe immobilized at the electrode surface and a reporter probe labeled biotin as an affinity tag for avidin‐HRP) modified LNA. Since biotin can be connected with avidin‐HRP, this biosensor offers an enzymatically amplified electrochemical current signal for the detection of target DNA. This new pattern exhibits high sensitivity and selectivity, and this biosensor has been used for an assay of PCR real sample with satisfactory result.     

Gold nanoparticles based chemiluminescent resonance energy transfer for immunoassay of alpha fetoprotein cancer marker

In this paper, we report a new strategy of chemiluminescence resonance energy transfer (CRET) by using gold nanoparticles (AuNPs) as efficient long-range energy acceptor in sandwich immunoassays. In the design of CRET system, we chose the highly sensitive chemiluminescence (CL) reaction of luminol and hydrogen peroxide catalysed by horseradish peroxidase (HRP) because the CL spectrum of luminol (λ(max) 425 nm) partially overlaps with the visible absorption bands of AuNPs. On the basis of CRET strategy, we developed a sandwich immunoassay of alpha fetoprotein (AFP) cancer marker. In immunoassay, two antibodies (anti-AFP-1 and anti-AFP-2) were conjugated to AuNPs and horseradish peroxidase (HRP), respectively. The sandwich-type immunoreactions between the AFP (antigen) and the two different antibodies bridged the donors (luminol) and acceptors (AuNPs), which led to the occurrence of CRET from luminol to AuNPs upon chemiluminescent reaction. We observed that the quenching of chemiluminescence signal depended linearly on the AFP concentration within a range of concentration from 5 to 70 ng mL(-1) and the detection limit of AFP was 2.5 ng mL(-1). Our method was successfully applied for determination of AFP levels in sera from cancer patients, and the results were in good agreement with ELISA assays. This approach is expected to be extended to other assay designs, that is, using other antibodies, analytes, chemiluminescent substance, and even other metallic nanoparticles.     

Aptamer‐Based SERS Assay of ATP and Lysozyme by Using Primer Self‐Generation

A simple bifunctional surface‐enhanced Raman scattering (SERS) assay based on primer self‐generation strand‐displacement polymerization (PS‐SDP) is developed to detect small molecules or proteins in parallel. Triphosphate (ATP) and lysozyme are used as the models of small molecules and proteins. Compared to traditional bifunctional methods, the method possesses some remarkable features as follows: 1) by virtue of the simple PS‐SDP reaction, a bifunctional aptamer assembly binding of trigger 1 and trigger 2 was used as a functional structure for the simultaneous sensing of ATP or lysozyme. 2) The concept of isothermal amplification bifunctional detection has been first introduced into SERS biosensing applications as a signal‐amplification tool. 3) The problem of high background induced by excess bio‐barcodes is circumvented by using magnetic beads (MBs) as the carrier of signal‐output products and massive of hairpin DNA binding with SERS active bio‐barcodes relied on Au nanoparticles (Au NPs), SERS signal is significantly enhanced. Overall, with multiple amplification steps and one magnetic‐separation procedure, this flexible biosensing system exhibited not only high sensitivity and specificity, with the detection limits of ATP and lysozyme of 0.05 nM and 10 fM , respectively.     

A New Signal‐On Photoelectrochemical Biosensor Based on a Graphene/Quantum‐Dot Nanocomposite Amplified by the Dual‐Quenched Effect of Bipyridinium Relay and AuNPs

A new photoelectrochemical (PEC) biosensor was developed by using carboxyl‐functionalized graphene and CdSe nanoparticles. This sensitive interface was then successfully applied to detection of thrombin based on the dual‐quenched effect of PEC nanoparticle, which relied on the electron transfer of a bipyridinium relay and energy transfer of AuNPs. After recognition with an aptamer, the PEC nanoparticle was removed and a signal‐on PEC biosensor was obtained. Moreover, the bio‐barcode technique used in the preparation of PEC nanoparticle could avoid cross‐reaction and enhances the sensitivity. Taking advantages of the various methods mentioned above, the sensitivity could be easily enhanced. In addition, in this work we also investigated graphene that was modified with different functional groups and AuNPs of different particle sizes. Under optimal conditions, a detection limit of 5.9×10^?15 M was achieved. With its simplicity, selectivity, and sensitivity, this strategy shows great promise for the fabrication of highly efficient PEC biosensors.     

Label‐Free,Non‐Derivatization CRET Detection Platform for 6‐Mercaptopurine Based on the Distance‐Dependent Optical Properties of Gold Nanoparticles

A label‐free, non‐derivatization chemiluminescence resonance energy transfer (CRET) detection platform has been developed for the detection of the non‐fluorescent small molecule 6‐mercaptopurine. This CRET process arose from a chemiluminescent (CL) donor–acceptor system in which the reaction of bis(2,4,6‐trichlorophenyl)oxalate (TCPO)–H₂O₂–fluorescein (maximum emission at 521.6 nm) served as the donor and gold nanoparticles (AuNPs, maximum absorption at 520.0 nm) served as the acceptor. This process caused a significant decrease in the CL signal of the TCPO–H₂O₂–fluorescein reaction. The presence of 6‐mercaptopurine induced an aggregation of AuNPs with the assistance of Cu²⁺ ions through cooperative metal–ligand interactions that was accompanied by a distinct change in color and optical properties. The maximum absorption band of the AuNPs was red‐shifted to 721.0 nm and no longer overlapped with the CL spectrum of the reaction; as a result, the CL signal was restored. This CRET system exhibited a wide linear range, from 9.0 nmol L^?1 to 18.0 μmol L^?1, and a low detection limit (0.62 nmol L^?1) for 6‐mercaptopurine. The applicability of the proposed CRET system was evaluated by analysis of 6‐mercaptopurine in spiked human plasma samples.     

A Sandwich‐type Electrochemiluminescence Aptasensor for Thrombin Based on Functional Co‐polymer Electrode Using Ru(bpy)32+ Doped Nanocomposites as Signal‐amplifying Tags

Herein, a signal‐on sandwich‐type electrochemiluminescence (ECL) aptasensor for the detection of thrombin (TB) was proposed. The graphene (GR) doped thionine (TH) was electropolymerized synchronously on the bare glassy carbon electrode (GCE) to form co‐polymer (PTG) electrode. The gold nanoparticles (AuNPs) were decorated on the surface of the PTG by in‐situ electrodeposition, and the functional co‐polymer (PTG‐AuNPs) electrode was utilized as sensing interface. Then, TB binding aptamer I (TBA I) as capture probes were modified on the PTG‐AuNPs electrode to capture TB, and Ru(bpy)₃²⁺/silver nanoparticles doped silica core‐shell nanocomposites‐labeled TB binding aptamer II (RuAg/SiO₂NPs@TBA II) were used as signal probes to further bind TB, resulting in a sandwich structure. With the assistant of silica shell and AgNPs, the enrichment and luminous efficiency of Ru(bpy)₃²⁺ were significantly improved. Under the synergy of PTG‐AuNPs and RuAg/SiO₂NPs, the ECL signal was dramatically increased. The proposed ECL aptasensor displayed a wide linear range from 2 fM to 2 pM with the detection limit of 1 fM, which is comparable or better than that in reported ECL aptasensors for TB using Ru(bpy)₃²⁺ and its derivatives as the luminescent substance. The excellent sensitivity makes the proposed aptasensor a promising potential in pharmaceutical and clinical analysis.     

Amplified electrochemical detection of nucleic acid hybridization via selective preconcentration of unmodified gold nanoparticles

The common drawback of optical methods for rapid detection of nucleic acid by exploiting the differential affinity of single-/double-stranded nucleic acids for unmodified gold nanoparticles (AuNPs) is its relatively low sensitivity. In this article, on the basis of selective preconcentration of AuNPs unprotected by single-stranded DNA (ssDNA) binding, a novel electrochemical strategy for nucleic acid sequence identification assay has been developed. Through detecting the redox signal mediated by AuNPs on 1, 6-hexanedithiol blocked gold electrode, the proposed method is able to ensure substantial signal amplification and a low background current. This strategy is demonstrated for quantitative analysis of the target microRNA (let-7a) in human breast adenocarcinoma cells, and a detection limit of 16 fM is readily achieved with desirable specificity and sensitivity. These results indicate that the selective preconcentration of AuNPs for electrochemical signal readout can offer a promising platform for the detection of specific nucleic acid sequence.     

3,4‐Dihydroxy‐L‐phenylalanine for Preparation of Gold Nanoparticles and as Electron Transfer Promoter in H2O2 Biosensor

3,4‐Dihydroxy‐L ‐phenylalanine (dopa) and 2‐(3,4‐dihydroxyphenyl)ethylamine (dopamine) were investigated as reducing agent and stabilizer for synthesis of gold nanoparticles (AuNPs) by one‐pot heating of a solution of HAuCl₄/dopa or dopamine. AuNPs with different sizes were obtained by controlling the mass ratios of HAuCl₄/dopa or dopamine. The formation mechanism for AuNPs was also proposed. Immobilization of horseradish peroxidase (HRP) and promotion of its electron transfer by polydopa film were investigated for preparation of H₂O₂ biosensor. Alkaline dopa solution was dropped onto a gold electrode for the formation of polydopa film. HRP was immobilized on the polydopa film through interactions between heme centre of HRP and the amine and carboxyl groups in polydopa. The AuNPs embedded in the polydopa film improved the electron transfer efficiency. These two factors allowed successful development of a H₂O₂ sensor with HRP@polydopa‐AuNPs electrode. Due to its biocompatibility, the polydopa‐AuNPs film provided good retention of enzyme activity and long‐term stability of the sensor. A rapid catalytic response (3 s) and a linear range from 0.006 to 5.0 mmol L^?1 were obtained for H₂O₂. This facile preparation strategy can be extended to other enzyme‐based biosensors.     

Multianalyte Electrochemical Biosensor Based on Aptamer‐ and Nanoparticle‐Integrated Bio‐Barcode Amplification

In the present work, a signal‐on electrochemical sensing strategy for the simultaneous detection of adenosine and thrombin is developed based on switching structures of aptamers. An Au electrode as the sensing surface is modified with two kinds of thiolated capture probes complementary to the linker DNA that contains either an adenosine aptamer or thrombin aptamer. The capture probes hybridize with their corresponding linker DNA, which has prehybridized with the reporter DNA loaded onto the gold nanoparticles (AuNPs). The AuNP contained two kinds of bio‐barcode DNA: one is complementary to the linker DNA (reporter), whereas the other is not (signal) and is tagged with different metal sulfide nanoparticles. Thus a “sandwich‐type” sensing interface is fabricated for adenosine and thrombin. With the introduction of adenosine and thrombin, the aptamer parts bind with their targets and fold to form the complex structures. As a result, the bio‐barcoded AuNPs are released into solution. The metal sulfide nanoparticles are measured by anodic stripping voltammetry (ASV), and the concentrations of adenosine and thrombin are proportional to the signal of either metal ion. With the dual amplification of the bio‐barcoded AuNP and the preconcentration of metal ions through ASV technology, detection limits as low as 6.6×10^?12 M for adenosine and 1.0×10^?12 M for thrombin are achieved. The sensor exhibits excellent selectivity and detectability in biological samples.