Chemical/Light‐Powered Hybrid Micromotors with “On‐the‐Fly” Optical Brakes

Hybrid micromotors capable of both chemically powered propulsion and fuel‐free light‐driven actuation and offering built‐in optical brakes for chemical propulsion are described. The new hybrid micromotors are designed by combining photocatalytic TiO₂ and catalytic Pt surfaces into a Janus microparticle. The chemical reactions on the different surfaces of the Janus particle hybrid micromotor can be tailored by using chemical or light stimuli that generate counteracting propulsion forces on the catalytic Pt and photocatalytic TiO₂ sides. Such modulation of the surface chemistry on a single micromotor leads to switchable propulsion modes and reversal of the direction of motion that reflect the tuning of the local ion concentration and hence the dominant propulsion force. An intermediate Au layer (under the Pt surface) plays an important role in determining the propulsion mechanism and operation of the hybrid motor. The built‐in optical braking system allows “on‐the‐fly” control of the chemical propulsion through a photocatalytic reaction on the TiO₂ side to counterbalance the chemical propulsion force generated on the Pt side. The adaptive dual operation of these chemical/light hybrid micromotors, associated with such control of the surface chemistry, holds considerable promise for designing smart nanomachines that autonomously reconfigure their propulsion mode for various on‐demand operations.     

Micromotor‐Based Energy Generation

A micromotor‐based strategy for energy generation, utilizing the conversion of liquid‐phase hydrogen to usable hydrogen gas (H₂), is described. The new motion‐based H₂‐generation concept relies on the movement of Pt‐black/Ti Janus microparticle motors in a solution of sodium borohydride (NaBH₄) fuel. This is the first report of using NaBH₄ for powering micromotors. The autonomous motion of these catalytic micromotors, as well as their bubble generation, leads to enhanced mixing and transport of NaBH₄ towards the Pt‐black catalytic surface (compared to static microparticles or films), and hence to a substantially faster rate of H₂ production. The practical utility of these micromotors is illustrated by powering a hydrogen–oxygen fuel cell car by an on‐board motion‐based hydrogen and oxygen generation. The new micromotor approach paves the way for the development of efficient on‐site energy generation for powering external devices or meeting growing demands on the energy grid.     

Multi‐Light‐Responsive Quantum Dot Sensitized Hybrid Micromotors with Dual‐Mode Propulsion

CdS quantum dots/C₆₀ tubular micromotors with chemical/multi‐light‐controlled propulsion and “on‐the‐fly” acceleration capabilities are described. In situ growth of CdS quantum dots on the outer fullerene layer imparts this layer with light‐responsive properties in connection to inner Pt, Pd or MnO₂ layers. This is the first time that visible light is used to drive bubble‐propelled tubular micromotors. The micromotors exhibit a broad absorption range from 320 to 670 nm and can be wirelessly controlled by modulating light intensity and peroxide concentration. The built‐in accelerating optical system allows for the control of the velocity over the entire UV/Vis light spectra by modulating the catalyst surface chemistry. The light‐responsive properties have been also exploited to accelerate the chemical dealloying and propulsion of micromotors containing a Cu/Pd layer. Such dual operated hybrid micromotors hold considerable promise for designing smart micromachines for on‐demand operations, motion‐based sensing, and enhanced cargo transportation.     

Simultaneous Removal of Antibiotics and Heavy Metals with Poly(Aspartic Acid)-Based Fenton Micromotors

The discharge of diverse pollutants has led to a complex water environment and posed a huge health threat to humans and animals. Self-propelled micromotors have recently attracted considerable attention for efficient water remediation due to their strong localized mass transfer effect. However, a single functionalized component is difficult to tackle with multiple contaminants and requires to combine different decontamination effects together. Here, we introduced a multifunctional micromotor to implement the adsorption and degradation roles simultaneously by integrating the poly(aspartic acid) (PASP) adsorbent with a MnO₂-based catalyst. The as-prepared micromotors are well propelled in contaminated waters by MnO₂ catalyzing hydrogen peroxide. In addition, the catalytic ramsdellite MnO₂(R-MnO₂) inner layer is decorated with Fe₂O₃ nanoparticles to improve their catalytic performance, contributing to an excellent degradation ability with 90% tetracycline (TC) removal in 50 minutes by enhanced Fenton-like reactions. Combining the attractive adsorption capability of poly (aspartic acid) (PASP), the composite micromotors offer an efficient removal of heavy metal ions in short time. Moreover, the designed micromotors are able to simultaneously remove antibiotic and heavy metals in mixed contaminants circumstance just in single treatment. This multifunctional micromotor with distinctive decontamination ability exhibits a promising prospective in treating multiple pollutants in the future.     

Rolled‐Up Monolayer Graphene Tubular Micromotors: Enhanced Performance and Antibacterial Property

The motion of catalytic tubular micromotors are driven by the oxygen bubbles generated from chemical reaction and is influenced by the resistance from the liquid environment. Herein, we fabricated a rolled‐up graphene tubular micromotor, in which the graphene layer was adopted as the outmost surface. Due to the hydrophobic property of the graphene layer, the fabricated micromotor performed a motion pattern that could escape from the attraction from the bubbles. In addition, Escherichia coli and Staphylococcus culture experiments proved that the graphene outer surface displays antibacterial property. Considering the bubble‐avoiding and antibacterial properties, the rolled‐up graphene tubular micromotor holds great potential for various applications such as in vivo drug delivery and biosensors.     

Micromotor‐Based Biomimetic Carbon Dioxide Sequestration: Towards Mobile Microscrubbers

We describe a mobile CO₂ scrubbing platform that offers a greatly accelerated biomimetic sequestration based on a self‐propelled carbonic anhydrase (CA) functionalized micromotor. The CO₂ hydration capability of CA is coupled with the rapid movement of catalytic micromotors, and along with the corresponding fluid dynamics, results in a highly efficient mobile CO₂ scrubbing microsystem. The continuous movement of CA and enhanced mass transport of the CO₂ substrate lead to significant improvements in the sequestration efficiency and speed over stationary immobilized or free CA platforms. This system is a promising approach to rapid and enhanced CO₂ sequestration platforms for addressing growing concerns over the buildup of greenhouse gas.     

Motion‐Based,High‐Yielding,and Fast Separation of Different Charged Organics in Water

We report a self‐propelled Janus silica micromotor as a motion‐based analytical method for achieving fast target separation of polyelectrolyte microcapsules, enriching different charged organics with low molecular weights in water. The self‐propelled Janus silica micromotor catalytically decomposes a hydrogen peroxide fuel and moves along the direction of the catalyst face at a speed of 126.3 μm s^?1. Biotin‐functionalized Janus micromotors can specifically capture and rapidly transport streptavidin‐modified polyelectrolyte multilayer capsules, which could effectively enrich and separate different charged organics in water. The interior of the polyelectrolyte multilayer microcapsules were filled with a strong charged polyelectrolyte, and thus a Donnan equilibrium is favorable between the inner solution within the capsules and the bulk solution to entrap oppositely charged organics in water. The integration of these self‐propelled Janus silica micromotors and polyelectrolyte multilayer capsules into a lab‐on‐chip device that enables the separation and analysis of charged organics could be attractive for a diverse range of applications.     

Graphdiyne Micromotors in Living Biomedia

Graphdiyne (GDY), a new kind of two-dimensional (2D) material, was combined with micromotor technology for “on-the-fly” operations in complex biomedia. Microtubular structures were prepared by template deposition on membrane templates, resulting in functional structures rich in sp and sp² carbons with highly conjugated π networks. This resulted in a highly increased surface area for a higher loading of anticancer drugs or enhanced quenching ability over other 2D based micromotors, such as graphene oxide (GO) or smooth tubular micromotors. High biocompatibility with almost 100 % cell viability was observed in cytotoxicity assays with moving micromotors in the presence of HeLa cells. On a first example, GDY micromotors loaded with doxorubicin (DOX) were used for pH responsive release and HeLa cancer cells killing. The use of affinity peptide engineered GDY micromotors was also illustrated for highly sensitive and selective fluorescent OFF–ON detection of cholera toxin B through specific recognition of the subunit B region of the target toxin. The new developments illustrated here offer considerable promise for the use of GDY as part of micromotors in living biosystems.     

Iridium‐Catalyst‐Based Autonomous Bubble‐Propelled Graphene Micromotors with Ultralow Catalyst Loading

A novel concept of an iridium‐based bubble‐propelled Janus‐particle‐type graphene micromotor with very high surface area and with very low catalyst loading is described. The low loading of Ir catalyst (0.54 at %) allows for fast motion of graphene microparticles with high surface area of 316.2 m² g^?1. The micromotor was prepared with a simple and scalable method by thermal exfoliation of iridium‐doped graphite oxide precursor composite in hydrogen atmosphere. Oxygen bubbles generated from the decomposition of hydrogen peroxide at the iridium catalytic sites provide robust propulsion thrust for the graphene micromotor. The high surface area and low iridium catalyst loading of the bubble‐propelled graphene motors offer great possibilities for dramatically enhanced cargo delivery.     

Large‐Scale Synthesis of High‐Quality Metal Sulfide Semiconductor Quantum Dots with Tunable Surface‐Plasmon Resonance Frequencies

High‐quality CdS and Cu₇S₄ quantum dots (QDs) were synthesized with N,N‐dibutylthiourea (DBTU) as an organic sulfur source. In this method, nucleation and growth reactions were controlled simply by the heating rate of the reaction. The mild oxidation conditions gave monodisperse CdS QDs exhibiting pure band‐edge emission with relatively high photoluminescence quantum yield. During the synthesis of Cu₇S₄ QDs, the addition of dodecanethiol to the reaction system controlled the reaction rate to give monodisperse spherical or disk‐shaped QDs. A hundred‐gram scale of copper precursor could be used to generate the high‐quality Cu₇S₄ QDs, indicating that an industrial‐scale reaction is achievable with our method. As observed in anisotropic noble‐metal nanocrystals, larger disk‐shaped Cu₇S₄ QDs showed lower localized‐surface‐plasmon resonance energy in the near‐infrared region. The disk‐shaped Cu₇S₄ QDs could be used effectively as templates to form cation‐exchanged monodisperse disk‐shaped CdS QDs.     

Synthesis of protein‐assisted aqueous Ag2S quantum dots in the bovine serum albumin solution

A one‐step method was developed for preparing Ag₂S quantum dots (QDs) using a common protein [bovine serum albumin (BSA)] to entrap QDs precursors (BSA–Ag⁺). Fluorescence (FL) and ultraviolet spectra showed that the molar ratio of Ag⁺/BSA, temperature, and pH are the crucial factors for the quality of QDs. The QDs absorption wavelength and emission wavelength were about 340 and 450 nm. The average QDs particle size was estimated to be less than 5 nm, determined by transmission electron microscopy. The X‐ray power diffraction and XPS results showed that the synthesized product was indeed monoclinic Ag₂S. With Fourier transform infrared spectra and thermogravimetry analysis, there might be conjugated bonds between Ag₂S QDs and –OH, –NH, and –SH groups in BSA. In addition, FL spectra suggest that the designed QDs can produce static quenching with BSA and the Stern–Volmer quenching constant (K_sv) was calculated as 2.145 × 10⁴. Copyright © 2014 John Wiley & Sons, Ltd.     

Visible‐Light Sensitization and Photoenergy Storage in Quantum Dot/Polyoxometalate Systems

Recently, the process by which energy is transferred from photoexcited semiconductor nanocrystals, called quantum dots (QDs), to other semiconductors has attracted much attention and has potential application in solar energy conversion (i.e., QD‐sensitized solar cells). Sensitization of wide band gap polyoxometalates (POMs) to visible light by using CuInS₂ QDs dispersed in an organic solution is demonstrated herein. Photoluminescence quenching and lifetime studies revealed efficient electron transfer from the CuInS₂ QDs to POMs, such as SiW₁₂O₄₀ and W₁₀O₃₂, that were hybridized with a cationic surfactant. CuInS₂ QDs function as an antenna that absorbs visible light and supplies electrons to the POMs to enable certain photocatalytic reactions, including noble‐metal‐ion reduction. The photoenergy storage capabilities of the QD‐POM system, in which electrons photogenerated in QDs by visible‐light excitation are trapped and accommodated by POMs to form reduced POM, are also demonstrated. Electrons stored in the POM can be later discharged through reductive reactions, such as oxygen reduction, in the dark.     

Highly Sensitive and Selective Fluorescence Probe for 2,4‐Dinitrophenylhydrazine Detection in Wastewater Using Water‐Soluble CdTe QDs

A simple, cheap, sensitive and selective probe for determination of DNPH in wastewater using thioglycolic acid (TGA)‐coated CdTe QDs (TGA‐QDs) as fluorescence probe has been established, and the properties of CdTe QDs were characterized by TEM, FT‐IR, DLS, XRD and zeta potentials. CdTe QDs fluorescence is highly efficiently quenched after adding DNPH on account of electron transfer effect, and the fluorescence quenching behavior of CdTe QDs interaction with DNPH is static quenching process. A good linear relationship is observed between the relative fluorescence intensity (F₀/F) and 0.06–10 ng mL^?1 of DNPH. As compared with some of reported methods, LOD of this method for analysis of DNPH (0.23 ng mL^?1) is the lowest. Masking agents of DDTC and NH₄OH can eliminate the interference of Cu²⁺, Ag⁺ and Hg²⁺. Hence, DNPH can be selectively and accurately detected and the established method was successfully used for detecting DNPH in wastewater with acceptable recovery of 90.6–102%.     

Surface‐State‐Mediated Charge‐Transfer Dynamics in CdTe/CdSe Core–Shell Quantum Dots

Herein, we report the synthesis of aqueous CdTe/CdSe type‐II core–shell quantum dots (QDs) in which 3‐mercaptopropionic acid is used as the capping agent. The CdTe QDs and CdTe/CdSe core–shell QDs are characterized by X‐ray diffraction (XRD), high‐resolution transmission electron microscopy (HR‐TEM), steady‐state absorption, and emission spectroscopy. A red shift in the steady‐state absorption and emission bands is observed with increasing CdSe shell thickness over CdTe QDs. The XRD pattern indicates that the peaks are shifted to higher angles after growth of the CdSe shell on the CdTe QDs. HR‐TEM images of both CdTe and CdTe/CdSe QDs indicate that the particles are spherical, with a good shape homogeneity, and that the particle size increases by about 2 nm after shell formation. In the time‐resolved emission studies, we observe that the average emission lifetime (τ_av) increases to 23.5 ns for CdTe/CdSe (for the thickest shell) as compared to CdTe QDs (τ_av=12 ns). The twofold increment in the average emission lifetime indicates an efficient charge separation in type‐II CdTe/CdSe core–shell QDs. Transient absorption studies suggest that both the carrier cooling and the charge‐transfer dynamics are affected by the presence of traps in the CdTe QDs and CdTe/CdSe core–shell QDs. Carrier quenching experiments indicate that hole traps strongly affect the carrier cooling dynamics in CdTe/CdSe core–shell QDs.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Long‐Lived Charge Carriers in Mn‐Doped CdS Quantum Dots for Photoelectrochemical Cytosensing

Photoelectrochemical (PEC) biosensing with semiconductor quantum dots (QDs) has received great attention because it integrates the advantages of both photo‐excitation and electrochemical detection. During the photon‐to‐electricity conversion in PEC processes, electron–hole (charge) separation competes with electron–hole recombination, and the net effect essentially determines the performance of PEC biosensors. Herein, we propose a new approach for slowing down electron–hole recombination to increase charge separation efficiency for PEC biosensor development. Through doping with Mn²⁺, a pair of d bands (⁴T₁ and ⁶A₁) is inserted between the conduction and valence bands of CdS QDs, which alters the electron–hole separation and recombination dynamics, allowing the generation of long‐lived charge carriers with ms‐scale lifetime that decay about 10⁴–10⁵‐fold more slowly than in the case of undoped QDs. Photocurrent tests indicated that Mn²⁺ doping resulted in an approximately 80 % increase in photocurrent generation compared with undoped CdS QDs. For application, the Mn‐doped CdS QDs were coated on the surface of a glassy carbon electrode and functionalized with a cell surface carbohydrate‐specific ligand (3‐aminophenylboronic acid). In this way, a sensitive cytosensor for K562 leukemia cells was constructed. Moreover, the sugar‐specific binding property of 3‐aminophenylboronic acid allowed the electrode to serve as a switch for the capture and release of cells. This has been further explored with a view to developing a reusable PEC cytosensing platform.     

Metal‐Based Transient Micromotors: From Principle to Environmental and Biomedical Applications

Inspired by transient devices, transient self‐destroying micromotors that are propelled by metal–water/acid reactions and autonomously disappear after completing their tasks have emerged as promising tools for diverse applications. Such transient machines require careful selection of the metal matrix and well‐designed architectures for effective propulsion and customized functionality. In particular, recent advances in transient micromotors based on the active metals Zn, Fe, and Mg are introduced here. First, the fundamental design principles of transient micromotors are discussed. Then, their recent progress in environmental and biomedical applications is highlighted.     

Prussian Blue Nanocubes‐SnO2 Quantum Dots‐Reduced Graphene Oxide Ternary Nanocomposite: An Efficient Non‐noble‐metal Electrocatalyst for Non‐enzymatic Detection of H2O2

Developing non‐noble‐metal electrocatalyst for non‐enzymatic H₂O₂ sensing is highly attractive. A facile, two‐step approach has been utilized for the synthesis of PBNCs/SnO₂ QDs/RGO ternary nanocomposite. TEM, SEM, XPS, and XRD techniques were used to the characterize the structural and morphological properties of synthesized ternary nanocomposite. The synthesized ternary nanocomposite has been examined as an electrode material for the electrochemical detection of H₂O₂ using the Amperometry technique. Under optimum conditions, PBNCs/SnO₂ QDs/RGO ternary nanocomposite performed very well in the electrocatalytic reduction of H₂O₂ with a linear dynamic range from 25–225 μM (R²=0.996) with a low detection limit of 71 nM (S/N=3). Compared to the recent literature, PBNCs/SnO₂QDs/RGO ternary nanocomposite based modified electrode exhibit a wider linear dynamic range with a low detection limit. Furthermore, PBNCs/SnO₂ QDs/RGO ternary nanocomposite based modified electrode showed an excellent anti‐interference ability against various common interfering agents. The practical applicability of this ternary nanocomposite based modified electrode was further extended to determine the H₂O₂ in tap water with acceptable recovery. The present performance of PBNCs/SnO₂ QDs/RGO ternary nanocomposite material towards H₂O₂ sensing might widen its application for developing a new type of non‐noble metal‐based non‐enzymatic electrochemical biosensors.     

Smart Microdevices Laying “Breadcrumbs” to Find the Way Home: Chemotactic Homing TiO2/Pt Janus Microrobots

Synthetic microrobots or micromotors are known to show “intelligent” behavior such as magnetotaxis, phototaxis, chemotaxis, active detection, and chemical communication. Herein, we present the concept of micromotors laying “breadcrumbs”; that is, these micromachines can move/return to a home position without external guidance after their external energy input is stopped. As a demonstration, TiO₂/Pt Janus micromotors that move forward with UV light can return back following the previous path when the UV light is turned off. Such autonomy of motion opens the door for truly independent applications of micromotors in the “deliver‐and‐return” fashion.     

Hydrophobic Poly(tert‐butyl acrylate) Photonic Crystals towards Robust Energy‐Saving Performance

Photonic crystals (PCs) have been widely applied in optical, energy, and biological fields owing to their periodic crystal structure. However, the major challenges are easy cracking and poor structural color, seriously hindering their practical applications. Now, hydrophobic poly(tert‐butyl acrylate) (P(t‐BA)) PCs have been developed with relatively lower glass transition temperature (T_g), large crack‐free area, excellent hydrophobic properties, and brilliant structure color. This method based on hydrophobic groups (tertiary butyl groups) provides a reference for designing new kinds of PCs via the monomers with relatively lower T_g. Moreover, the P(t‐BA) PCs film were applied as the photoluminescence (PL) enhanced film to enhance the PL intensity of CdSe@ZnS QDs by 10‐fold in a liquid‐crystal display (LCD) device. The new‐type hydrophobic force assembled PCs may open an innovative avenue toward new‐generation energy‐saving devices.