Impact of Single Basepair Mismatches on Electron‐Transfer Processes at Fc‐PNA⋅DNA Modified Gold Surfaces

Gold‐surface grafted peptide nucleic acid (PNA) strands, which carry a redox‐active ferrocene tag, present unique tools to electrochemically investigate their mechanical bending elasticity based on the kinetics of electron‐transfer (ET) processes. A comparative study of the mechanical bending properties and the thermodynamic stability of a series of 12‐mer Fc‐PNA?DNA duplexes was carried out. A single basepair mismatch was integrated at all possible strand positions to provide nanoscopic insights into the physicochemical changes provoked by the presence of a single basepair mismatch with regard to its position within the strand. The ET processes at single mismatch Fc‐PNA?DNA modified surfaces were found to proceed with increasing diffusion limitation and decreasing standard ET rate constants k⁰ when the single basepair mismatch was dislocated along the strand towards its free‐dangling Fc‐modified end. The observed ET characteristics are considered to be due to a punctual increase in the strand elasticity at the mismatch position. The kinetic mismatch discrimination with respect to the fully‐complementary duplex presents a basis for an electrochemical DNA sensing strategy based on the Fc‐PNA?DNA bending dynamics for loosely packed monolayers. In a general sense, the strand elasticity presents a further physicochemical property which is affected by a single basepair mismatch which may possibly be used as a basis for future DNA sensing concepts for the specific detection of single basepair mismatches.     

Directional Preference of DNA‐Mediated Electron Transfer in Gold‐Tethered DNA Duplexes: Is DNA a Molecular Rectifier?

Electrical properties of self‐assembling DNA nanostructures underlie the paradigm of nanoscale bioelectronics, and as such require clear understanding. DNA‐mediated electron transfer (ET) from a gold electrode to DNA‐bound Methylene Blue (MB) shows directional preference, and it is sequence‐specific. During the electrocatalytic reduction of [Fe(CN)₆]^3? catalyzed by DNA‐bound MB, the ET rate constant for DNA‐mediated reduction of MB reaches (1.32±0.2)10³ and (7.09±0.4)10³ s^?1 for (dGdC)₂₀ and (dAdT)₂₅ duplexes. The backward oxidation process is less efficient, making the DNA duplex a molecular rectifier. Lower rates of ET via (dGdC)₂₀ agree well with its disturbed π‐stacked sub‐molecular structure. Such direction‐ and sequence‐specific ET may be implicated in DNA oxidative damage and repair, and be relevant to other polarized surfaces, such as cell membranes and biomolecular interfaces.     

Spin Selectivity in Electron Transfer in Photosystem I

Photosystem I (PSI) is one of the most studied electron transfer (ET) systems in nature; it is found in plants, algae, and bacteria. The effect of the system structure and its electronic properties on the electron transfer rate and yield was investigated for years in details. In this work we show that not only those system properties affect the ET efficiency, but also the electrons’ spin. Using a newly developed spintronic device and a technique which enables control over the orientation of the PSI monolayer relative to the device (silver) surface, it was possible to evaluate the degree and direction of the spin polarization in ET in PSI. We find high‐spin selectivity throughout the entire ET path and establish that the spins of the electrons being transferred are aligned parallel to their momenta. The spin selectivity peaks at 300 K and vanishes at temperatures below about 150 K. A mechanism is suggested in which the chiral structure of the protein complex plays an important role in determining the high‐spin selectivity and its temperature dependence. Our observation of high light induced spin dependent ET in PSI introduces the possibility that spin may play an important role in ET in biology.     

Low-temperature electronic transport through macromolecules and characteristics of intramolecular electron transfer

Long-distance electron transfer (ET) plays an important part in many biological processes. Also, fundamental understanding of ET processes could give grounds for designing miniaturized electronic devices. So far, experimental data on the ET mostly concern ET rates which characterize ET processes as a whole. Here, we develop a different approach which could provide more information about intrinsic characteristics of the long-range intramolecular ET. A starting point of the studies is an obvious resemblance between ET processes and electric transport through molecular wires placed between metallic contacts. Accordingly, the theory of electronic transport through molecular wires is applied to analyze characteristics of a long-range electron transfer through molecular bridges. Assuming a coherent electron tunneling to be a predominant mechanism of ET at low temperatures, it is shown that low-temperature current-voltage characteristics could exhibit a special structure, and the latter contains information concerning intrinsic features of the intramolecular ET. Using the Buttiker dephasing model within the scattering matrix formalism, we analyze the effect of dephasing on the electron transmission function and current-voltage curves.     

Ultrafast proton-coupled electron-transfer dynamics in pyrene-modified pyrimidine nucleosides: model studies towards an understanding of reductive electron transport in DNA.

5-(Pyren-1-yl)-2'-deoxyuridine (PydU) and 5-(Pyren-1-yl)-2'-deoxycytidine (PydC) were used as model nucleosides for DNA-mediated reductive electron transport (ET) in steady-state fluorescence and femtosecond time-resolved transient absorption spectroscopy studies. Excitation of the pyrene moiety in PydU and PydC leads to an intramolecular electron transfer that yields the pyrenyl radical cation and the corresponding pyrimidine radical anion (dU.- and dC.-. By comparing the excited state dynamics of PydC and PydU, we derived information about the energy difference between the two pyrimidine radical anion states. To determine the influence of protonation on the rates of photoinduced intramolecular ET, the spectroscopic investigations were performed in acetonitrile, MeCN, and in water at different pH values. The results show a significant difference in the basicity of the generated pyrimidine radical anions and imply an involvement of proton transfer during electron hopping in DNA. Our studies revealed that the radical anion dC.- is being protonated even in basic aqueous solution on a picosecond time scale (or faster). These results suggest that protonation of dC.- may also occur in DNA. In contrast, efficient ET in PydU could only be observed at low pH values (< 5). In conclusion, we propose--based on the free energy differences and the different basicities--that only dT.- but not dC.- can participate as an intermediate charge carrier for excess electron migration in DNA.     

Water effects on electron transfer in azurin dimers

Recent experimental and theoretical analyses indicate that water molecules between or near redox partners can significantly affect their electron-transfer (ET) properties. Here, we study the effects of intervening water molecules on the electron self-exchange reaction of azurin (Az) by using a newly developed ab-initio method to calculate transfer integrals between molecular sites. We show that the insertion of water molecules in the gap between the copper active sites of Az dimers slows down the exponential decay of the ET rates with the copper-to-copper distance. Depending on the distance between the redox sites, water can enhance or suppress the electron-transfer kinetics. We show that this behavior can be ascribed to the simultaneous action of two competing effects: the electrostatic interaction of water with the protein subsystem and its ability to mediate ET coupling pathways.     

Optical,Redox, and DNA‐Binding Properties of Phenanthridinium Chromophores: Elucidating the Role of the Phenyl Substituent for Fluorescence Enhancement of Ethidium in the Presence of DNA

The phenanthridinium chromophores 5‐ethyl‐6‐phenylphenanthridinium ( 1 ), 5‐ethyl‐6‐methylphenanthridinium ( 2 ), 3,8‐diamino‐5‐ethyl‐6‐methylphenanthridinium ( 3 ), and 3,8‐diamino‐5‐ethyl‐6‐(4‐N,N‐diethylaminophenyl)phenanthridinium ( 4 ) were characterized by their optical and redox properties. All dyes were applied in titration experiments with a random‐sequence 17mer DNA duplex and their binding affinities were determined. The results were compared to well‐known ethidium bromide ( E ). In general, this set of data allows the influence of substituents in positions 3, 6, and 8 on the optical properties of E to be elucidated. Especially, compound 4 was used to compare the weak electron‐donating character of the phenyl substituent at position 6 of E with the more electron‐donating 4‐N,N‐diethylaminophenyl group. Analysis of all of the measurements revealed two pairs of chromophores. The first pair, consisting of 1 and 2 , lacks the amino groups in positions 3 and 8, and, as a result, these dyes exhibit clearly altered optical and electrochemical properties compared with E . In the presence of DNA, a significant fluorescence quenching was observed. Their binding affinity to DNA is reduced by nearly one order of magnitude. The electronic effect of the phenyl group in position 6 on this type of dye is rather small. The properties of the second set, 3 and 4 , are similar to E due to the presence of the two strongly electron‐donating amino groups in positions 3 and 8. However, in contrast to 1 and 2 , the electron‐donating character of the substituent in position 6 of 3 and 4 is critical. The binding, as well as the fluorescence enhancement, is clearly related to the electron‐donating effect of this substituent. Accordingly, compound 4 shows the strongest binding affinity and the strongest fluorescence enhancement. Quantum chemical calculations reveal a general mechanism related to the twisted intramolecular charge transfer (TICT) model. Accordingly, an increase of the twist angle between the phenyl ring in position 6 and the phenanthridinium core opens a nonradiative channel in the excited state that depends on the electron‐donating character of the phenyl group. Access to this channel is hindered upon binding to DNA.     

Nitrogen Photofixation over III‐Nitride Nanowires Assisted by Ruthenium Clusters of Low Atomicity

In many heterogeneous catalysts, the interaction of supported metal species with a matrix can alter the electronic and morphological properties of the metal and manipulate its catalytic properties. III‐nitride semiconductors have a unique ability to stabilize ultra‐small ruthenium (Ru) clusters (ca. 0.8 nm) at a high loading density up to 5 wt %. n‐Type III‐nitride nanowires decorated with Ru sub‐nanoclusters offer controlled surface charge properties and exhibit superior UV‐ and visible‐light photocatalytic activity for ammonia synthesis at ambient temperature. A metal/semiconductor interfacial Schottky junction with a 0.94 eV barrier height can greatly facilitate photogenerated electron transfer from III‐nitrides to Ru, rendering Ru an electron sink that promotes N≡N bond cleavage, and thereby achieving low‐temperature ammonia synthesis.     

G‐quadruplex Nanowires To Direct the Efficiency and Selectivity of Electrocatalytic CO2 Reduction

DNA as a medium for electron transfer has been widely used in photolytic processes but is seldom applied to dark reaction of CO₂ reduction. A G‐quadruplex nanowire (tsGQwire) assembled by guanine tetranucleotides was used to host several metal complexes and further to mediate electron transfer processes in the electrochemical reduction of CO₂ catalyzed by these complexes. The tsGQwire modified electrode increased the Faradaic efficiency of cobalt(II) phthalocyanine (Co^IIPc) 2.5‐folds for CO production than bare Co^IIPc electrode, with a total current density of 11.5 mA cm^?2. Comparable Faradaic efficiency of HCOOH production was achieved on tsGQwire electrode when the catalytic center was switched to a GQ targeting Ru complex. The high efficiency and selectivity of electrocatalytic CO₂ reduction was attributed to the unique binding of metal complexes on G‐quadruplex and electron transfer mediated by GQ nanowire to achieve efficient redox cycling of catalytic centers on the electrode.     

Photochemistry and spectroscopy of "stable organic radicals": steric and electronic effects in intermolecular photoinduced electron transfer

The intermolecular reactivities of amino-substituted perchlorotriphenylmethyl radicals 1-3 were studied, with particular emphasis on electron transfer (ET) reactions. The natural fluorescence lifetimes and the rates of the electron-transfer quenching were studied with several electron donors and acceptors. Fluorescence quenching studies demonstrate the importance of the redox potentials of the ET pair on the observed steric and electronic properties.     

DFT/TDDFT Investigation of the Modulation of Photochromic Properties in an Organoboron‐Based Diarylethene by Fluoride Ions

The diarylethene derivative 1,2‐bis‐(5′‐dimesitylboryl‐2′‐methylthieny‐3′‐yl)‐cyclopentene ( 1 ) containing dimesitylboryl groups is an interesting photochromic material. The dimesitylboryl groups can bind to F^?, which tunes the optical and electronic properties of the diarylethene compound. Hence, the diarylethene derivative 1 containing dimesitylboryl groups is sensitive to both light and F^?, and its photochromic properties can be tuned by a fluoride ion. Herein, we studied the substituent effect of dimesitylboron groups on the optical properties of both the closed‐ring and open‐ring isomers of the diarylethene molecule by DFT/TDDFT calculations and found that these methods are reliable for the determination of the lowest singlet excitation energies of diarylethene compounds. The introduction of dimesitylboron groups to the diarylethene compound can elongate its conjugation length and change the excited‐state properties from π→π* transition to a charge‐transfer state. This explains the modulation of photochromic properties through the introduction of dimesitylboron groups. Furthermore, the photochromic properties can be tuned through the binding of F^? to a boron center and the excited state of the diarylethene compound is changed from a charge‐transfer state to a π→π* transition. Hence, a subtle control of the photochromic spectroscopic properties was realized. In addition, the changes of electronic characteristics by the isomerization reaction of diarylethene compounds were also investigated with theoretical calculations. For the model compound 2 without dimesitylboryl groups, the closed‐ring isomer has better hole‐ and electron‐injection abilities, as well as higher charge‐transport rates, than the open‐ring isomer. The introduction of dimesitylboron groups to diarylethene can dramatically improve the charge‐injection and ‐transport abilities. The closed isomer of compound 1 ( 1 C ) has the best hole‐ and electron‐injection abilities, whereas the charge‐transport rates of the open isomer of compound 1 ( 1 O ) are higher than those of 1 C . Importantly, 1 O is an electron‐accepting and ‐transport material. These results show that the diarylethene compound containing dimesitylboryl groups has promising potential to be applied in optoelectronic devices and thus is worth to be further investigated.     

Coupling Electrochemical Adsorption and Long‐range Electron Transfer: Label‐free DNA Mismatch Detection with Ultramicroelectrode (UME)

A new electrochemical hybridization transduction pathway, obtained by coupling electrochemical adsorption and long‐range electron transfer through double‐stranded DNA, was investigated using ultramicroelectrode (UME). The results show that long‐range electron transfer does not occurs exclusively throws well‐packed and organized self‐assembled DNA monolayers. This approach is used to investigate long‐range electron transfer properties of both single‐ and double‐ stranded short synthetic DNA and DNA plasmids. Single mismatch electrochemical detection protocol of non‐labelled short synthetic DNA, without heating or probe labelling, in a 10 minutes protocol, was in fine performed.     

The Correlation of Electrochemical Measurements and Molecular Junction Conductance Simulations in β‐Strand Peptides

Understanding the electronic properties of single peptides is not only of fundamental importance, but it is also paramount to the realization of peptide‐based molecular electronic components. Electrochemical and theoretical studies are reported on two β‐strand‐based peptides, one with its backbone constrained with a triazole‐containing tether introduced by Huisgen cycloaddition (peptide 1 ) and the other a direct linear analogue (peptide 2 ). Density functional theory (DFT) and non‐equilibrium Green’s function were used to investigate conductance in molecular junctions containing peptides 3 and 4 (analogues of 1 and 2 ). Although the peptides share a common β‐strand conformation, they display vastly different electronic transport properties due to the presence (or absence) of the side‐bridge constraint and the associated effect on backbone rigidity. These studies reveal that the electron transfer rate constants of 1 and 2 , and the conductance calculated for 3 and 4 , differ by approximately one order of magnitude, thus providing two distinctly different conductance states and what is essentially a molecular switch. A definitive correlation of electrochemical measurements and molecular junction conductance simulations is demonstrated using two different charge transfer techniques. This study furthers our understanding of the electronic properties of peptides at the molecular level, which provides an opportunity to fine‐tune their molecular orbital energies through suitable structural manipulation.     

Mechanism of electrochemical charge transport in individual transition metal complexes

We used electrochemical scanning tunneling microscopy (STM) and spectroscopy (STS) to elucidate the mechanism of electron transport through individual pyridyl-based Os complexes. Our tunneling data obtained by two-dimensional electrochemical STS and STM imaging lead us to the conclusion that electron transport occurs by thermally activated hopping. The conductance enhancement around the redox potential of the complex, which is reminiscent of switching and transistor characterics in electronics, is reflected both in the STM imaging contrast and directly in the tunneling current. The latter shows a biphasic distance dependence, in line with a two-step electron hopping process. Under conditions where the substrate/molecule electron transfer (ET) step is dominant in determining the overall tunneling current, we determined the conductance of an individual Os complex to be 9 nS (Vbias = 0.1 V). We use theoretical approaches to connect the single-molecule conductance with electrochemical kinetics data obtained from monolayer experiments. While the latter leave some controversy regarding the degree of electronic coupling, our results suggest that electron transport occurs in the adiabatic limit of strong electronic coupling. Remarkably, and in contrast to established ET theory, the redox-mediated tunneling current remains strongly distance dependent due to the electronic coupling, even in the adiabatic limit. We exploit this feature and apply it to electrochemical single-molecule conductance data. In this way, we attempt to paint a unified picture of electrochemical charge transport at the single-molecule and monolayer levels.     

Photophysical Properties of Ruthenium(II) Polypyridyl DNA Intercalators: Effects of the Molecular Surroundings Investigated by Theory

The environmental effects on the structural and photophysical properties of [Ru(L)₂(dppz)]²⁺ complexes (L=bpy=2,2′‐bipyridine, phen=1,10‐phenanthroline, tap=1,4,5,8‐tetraazaphenanthrene; dppz=dipyrido[3,3‐a:2′,3′‐c]phenazine), used as DNA intercalators, have been studied by means of DFT, time‐dependent DFT, and quantum mechanics/molecular mechanics calculations. The electronic characteristics of the low‐lying triplet excited states in water, acetonitrile, and DNA have been investigated to decipher the influence of the environment on the luminescent behavior of this class of molecules. The lowest triplet intra‐ligand (IL) excited state calculated at λ≈800 nm for the three complexes and localized on the dppz ligand is not very sensitive to the environment and is available for electron transfer from a guanine nucleobase. Whereas the lowest triplet metal‐to‐ligand charge‐transfer (³MLCT) states remain localized on the ancillary ligand (tap) in [Ru(tap)₂(dppz)]²⁺, regardless of the environment, their character is drastically modified in the other complexes [Ru(phen)₂(dppz)]²⁺ and [Ru(bpy)₂(dppz)]²⁺ upon going from acetonitrile (MLCT_dppz/phen or MLCT_dppz/bpy) to water (MLCT_dppz) and DNA (MLCT_phen and MLCT_bpy). The change in the character of the low‐lying ³MLCT states accompanying nuclear relaxation in the excited state controls the emissive properties of the complexes in water, acetonitrile, and DNA. The light‐switching effect has been rationalized on the basis of environment‐induced control of the electronic density distributed in the lowest triplet excited states.     

Photolyase: Dynamics and Mechanisms of Repair of Sun‐Induced DNA Damage

Photolyase, a photomachine discovered half a century ago for repair of sun‐induced DNA damage of cyclobutane pyrimidine dimers (CPDs) and pyrimidine (6‐4) pyrimidone photoproducts (6‐4PPs), has been characterized extensively in biochemistry (function), structure and dynamics since 1980s. The molecular mechanism and repair photocycle have been revealed at the most fundamental level. Using femtosecond spectroscopy, we have mapped out the entire dynamical evolution and determined all actual timescales of the catalytic processes. Here, we review our recent efforts in studies of the dynamics of DNA repair by photolyases. The repair of CPDs in three life kingdoms includes seven electron transfer (ET) reactions among 10 elementary steps through initial bifurcating ET pathways, a direct tunneling route and a two‐step hopping path both through an intervening adenine from the cofactor to CPD, with a conserved folded structure at the active site. The repair of 6‐4PPs is challenging and requires similar ET reactions and a new cyclic proton transfer with a conserved histidine residue at the active site of (6‐4) photolyases. Finally, we also summarize our efforts on multiple intraprotein ET of photolyases in different redox states and such mechanistic studies are critical to the functional mechanism of homologous cryptochromes of blue‐light photoreceptors.     

Robust charge transport in DNA double crossover assemblies

BACKGROUND: Multiple-stranded DNA assemblies, encoded by sequence, have been constructed in an effort to self-assemble nanodevices of defined molecular architecture. Double-helical DNA has been probed also as a molecular medium for charge transport. Conductivity studies suggest that DNA displays semiconductor properties, whereas biochemical studies have shown that oxidative damage to B-DNA at the 5'-G of a 5'-GG-3' doublet can occur by charge transport through DNA up to 20 nm from a photo-excited metallointercalator. The possible application of DNA assemblies, in particular double crossover (DX) molecules, in electrical nanodevices prompted the design of a DNA DX assembly with oxidatively sensitive guanine moieties and a tethered rhodium photo-oxidant strategically placed to probe charge transport. RESULTS: DX assemblies support long-range charge transport selectively down the base stack bearing the intercalated photo-oxidant. Despite tight packing, no electron transfer (ET) crossover to the adjacent base stack is observed. Moreover, the base stack of a DX assembly is well-coupled and less susceptible than duplex DNA to stacking perturbations. Introducing a double mismatch along the path for charge transport entirely disrupts long-range ET in duplex DNA, but only marginally decreases it in the analogous stack within DX molecules. CONCLUSIONS: The path for charge transport in a DX DNA assembly is determined directly by base stacking. As a result, the two closely packed stacks within this assembly are electronically insulated from one another. Therefore, DX DNA assemblies may serve as robust, insulated conduits for charge transport in nanoscale devices.     

DFT approach to calculate electronic transfer through a segment of DNA double helix

The electronic structures of an entire segment of a DNA molecule were calculated in its single‐strand and double‐helix cases using the DFT method with an overlapping dimer approximation and negative factor counting method. The hopping conductivity of the segment was calculated by the random walk theory from the results of energy levels and wave functions obtained. The results of the single‐strand case show that the DFT method is quantitatively in agreement with that of the HF MP2 method. The results for the double helix are in good agreement with that of the experimental data. Therefore, the long‐range electron transfer through the DNA molecule should be caused by hopping of electronic charge carriers among different energy levels whose corresponding wave functions are localized at different bases of the DNA molecule. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 1109–1117, 2000