Photothermal Welding,Melting, and Patterned Expansion of Nonwoven Mats of Polymer Nanofibers for Biomedical and Printing Applications

We report a simple method for the photothermal welding of nonwoven mats of electrospun nanofibers by introducing a near‐infrared (NIR) dye such as indocyanine green. By leveraging the strong photothermal effect of the dye, the nanofibers can be readily welded at their cross points or even over‐welded (i.e., melted and/or fused together) to transform the porous mat into a solid film upon exposure to a NIR laser. While welding at the cross points greatly improves the mechanical strength of a nonwoven mat of nanofibers, melting and fusion of the nanofibers can be employed to fabricate a novel class of photothermal papers for laser writing or printing without chemicals or toner particles. By using a photomask, we can integrate photothermal welding with the gas foaming technique to pattern and then expand nonwoven mats into 3D scaffolds with well‐defined structures. This method can be applied to different combinations of polymers and dyes, if they can be co‐dissolved in a suitable solvent for electrospinning.     

Harvesting Light To Produce Heat: Photothermal Nanoparticles for Technological Applications and Biomedical Devices

The photothermal properties of nanoparticles (NPs), that is, their ability to convert absorbed light into heat, have been studied since the end of the last century, mainly on gold NPs. In the new millennium, these studies have developed into a burst of research dedicated to the photothermal ablation of tumors. However, beside this strictly medical theme, research has also flourished in the connected areas of photothermal antibacterial surface coatings, gels and polymers, of photothermal surfaces for cell stimulation, as well as in purely technological areas that do not involve medical biotechnology. These include the direct conversion of solar light into heat, a more efficient sun-powered generation of steam and the use of inkjet-printed patterns of photothermal NPs for anticounterfeit printing based on temperature reading, to cite but a few. After an analysis of the photothermal effect (PTE) and its mechanism, this minireview briefly considers the antitumor-therapy theme and takes an in-depth look at all the other technological and biomedical applications of the PTE, paying particular attention to photothermal materials whose NPs have joined those based on Au.     

石墨烯/有机共轭体系的光热效应与应用

本文对近几年来石墨烯/有机共轭体系在光热效应领域取得的重要研究进展进行了总结评述。虽然有机光热试剂具有优异的光热转换效率和良好的生物相容性,但是,有机光热试剂的光稳定性差,限制了其实际应用。现有研究结果表明,石墨烯可显著地增强有机共轭体系的光稳定性,大幅提高其光热转换效率。此外,石墨烯/有机共轭体系还可集多种功能于一体,例如:光声成像指导下的光热治疗、pH响应的荧光成像和光热治疗、光热和光动力联合治疗等,这对有机共轭体系在光热治疗领域的应用具有重要意义。本文总结的研究结果及所作的分析,希望对新型有机共轭体系的光热效应及后续研究起到一定的参考和促进作用。     

Recent Developments in Chitosan-Based Micro/Nanofibers for Sustainable Food Packaging,Smart Textiles,Cosmeceuticals, and Biomedical Applications

Chitosan has many useful intrinsic properties (e.g., non-toxicity, antibacterial properties, and biodegradability) and can be processed into high-surface-area nanofiber constructs for a broad range of sustainable research and commercial applications. These nanofibers can be further functionalized with bioactive agents. In the food industry, for example, edible films can be formed from chitosan-based composite fibers filled with nanoparticles, exhibiting excellent antioxidant and antimicrobial properties for a variety of products. Processing ‘pure’ chitosan into nanofibers can be challenging due to its cationic nature and high crystallinity; therefore, chitosan is often modified or blended with other materials to improve its processability and tailor its performance to specific needs. Chitosan can be blended with a variety of natural and synthetic polymers and processed into fibers while maintaining many of its intrinsic properties that are important for textile, cosmeceutical, and biomedical applications. The abundance of amine groups in the chemical structure of chitosan allows for facile modification (e.g., into soluble derivatives) and the binding of negatively charged domains. In particular, high-surface-area chitosan nanofibers are effective in binding negatively charged biomolecules. Recent developments of chitosan-based nanofibers with biological activities for various applications in biomedical, food packaging, and textiles are discussed herein.     

Processing and Properties of Nanofibrous Bacterial Cellulose-Containing Polymer Composites: A Review of Recent Advances for Biomedical Applications

Abstract

Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including wound dressing, tissue engineering scaffolds, and drug delivery. Special emphasis is placed on the fabrication and applications of BC-containing nanofibrous composites for biomedical usage. It summarizes electrospinning of BC-based nanofibers and their surface modification with an outline on challenges and future perspective.     

S‐Nitrosoglutathione‐Based Nitric Oxide‐Releasing Nanofibers Exhibit Dual Antimicrobial and Antithrombotic Activity for Biomedical Applications

The novel use of nanofibers as a physical barrier between blood and medical devices has allowed for modifiable, innovative surface coatings on devices ordinarily plagued by thrombosis, delayed healing, and chronic infection. In this study, the nitric oxide (NO) donor S‐nitrosoglutathione (GSNO) is blended with the biodegradable polymers polyhydroxybutyrate (PHB) and polylactic acid (PLA) for the fabrication of hemocompatible, antibacterial nanofibers tailored for blood‐contacting applications. Stress/strain behavior of different concentrations of PHB and PLA is recorded to optimize the mechanical properties of the nanofibers. Nanofibers incorporated with different concentrations of GSNO (10, 15, 20 wt%) are evaluated based on their NO‐releasing kinetics. PLA/PHB + 20 wt% GSNO nanofibers display the greatest NO release over 72 h (0.4–1.5 × 10^?10 mol mg^?1 min^?1). NO‐releasing fibers successfully reduce viable adhered bacterial counts by ≈80% after 24 h of exposure to Staphylococcus aureus. NO‐releasing nanofibers exposed to porcine plasma reduce platelet adhesion by 64.6% compared to control nanofibers. The nanofibers are found noncytotoxic (>95% viability) toward NIH/3T3 mouse fibroblasts, and 4′,6‐diamidino‐2‐phenylindole and phalloidin staining shows that fibroblasts cultured on NO‐releasing fibers have improved cellular adhesion and functionality. Therefore, these novel NO‐releasing nanofibers provide a safe antimicrobial and hemocompatible coating for blood‐contacting medical devices.     

Cryo-FIB-Preparation and Cryo-SEM Investigation of Gold Nanolayers Used as Absorber for Laser Welding of Polymer Foils

The morphology of welded polymer foils was investigated by Scanning Electron Microscopy (SEM) using Focused Ion Beam (FIB) technology for cross-sectional preparation. Due to the sensitive structure of the copolymer Ethylene Tetrafluororethylene (ETFE), FIB preparation and SEM investigation were performed at cryo conditions. A gold nanolayer was used as absorber for the laser beam to weld the transparent copolymer foils. The embedding of the gold nanolayer inside the welding seam and its influence on the mechanical stability of the welding seams was demonstrated.     

Photothermal Deflection Spectroscopy for Ultra Trace Analysis of Cobalt and Copper Ions

Abstract

Photothermal deflection spectroscopy (PDS) is applied for the absolute determination at room temperature of ultra trace concentration of cobalt and copper ions in aqueous solution. The samples have been prepared by percolating 2 liters of solution prepared from Merck Titrisol Standards in 200 mg Merck-I cationic exchange resin. With the present experimental conditions the detection limit is 20 ppb and 200 ppb for copper and cobalt ions respectively within an overall accuracy of 5%. The response of the spectrometer has been calibrated using ICP technique.     

Coupling Infusion and Gyration for the Nanoscale Assembly of Functional Polymer Nanofibers Integrated with Genetically Engineered Proteins

Nanofibers featuring functional nanoassemblies show great promise as enabling constituents for a diverse range of applications in areas such as tissue engineering, sensing, optoelectronics, and nanophotonics due to their controlled organization and architecture. An infusion gyration method is reported that enables the production of nanofibers with inherent biological functions by simply adjusting the flow rate of a polymer solution. Sufficient polymer chain entanglement is obtained at Berry number > 1.6 to make bead‐free fibers integrated with gold nanoparticles and proteins, in the diameter range of 117–216 nm. Integration of gold nanoparticles into the nanofiber assembly is followed using a gold‐binding peptide tag genetically conjugated to red fluorescence protein (DsRed). Fluorescence microscopy analysis corroborated with Fourier transform infrared spectroscopy (FTIR) data confirms the integration of the engineered red fluorescence protein with the nanofibers. The gold nanoparticle decorated nanofibers having red fluorescence protein as an integral part keep their biological functionality including copper‐induced fluorescence quenching of the DsRed protein due to its selective Cu⁺² binding. Thus, coupling the infusion gyration method in this way offers a simple nanoscale assembly approach to integrate a diverse repertoire of protein functionalities into nanofibers to generate biohybrid materials for imaging, sensing, and biomaterial applications.

     

Synthesis,Chemical–Physical Characterization,and Biomedical Applications of Functional Gold Nanoparticles: A Review

Relevant properties of gold nanoparticles, such as stability and biocompatibility, together with their peculiar optical and electronic behavior, make them excellent candidates for medical and biological applications. This review describes the different approaches to the synthesis, surface modification, and characterization of gold nanoparticles (AuNPs) related to increasing their stability and available features useful for employment as drug delivery systems or in hyperthermia and photothermal therapy. The synthetic methods reported span from the well-known Turkevich synthesis, reduction with NaBH₄ with or without citrate, seeding growth, ascorbic acid-based, green synthesis, and Brust–Schiffrin methods. Furthermore, the nanosized functionalization of the AuNP surface brought about the formation of self-assembled monolayers through the employment of polymer coatings as capping agents covalently bonded to the nanoparticles. The most common chemical–physical characterization techniques to determine the size, shape and surface coverage of AuNPs are described underlining the structure–activity correlation in the frame of their applications in the biomedical and biotechnology sectors.     

High Melting Point of Linear,Spiral Polyethylene Nanofibers and Polyethylene Microspheres Obtained Through Confined Polymerization by a PPM-Supported Ziegler-Natta Catalyst

In this work, different types of polyethylene (linear, spiral nanofibers and microspheres) were obtained via confined polymerization by a PPM-supported Ziegler-Natta catalyst. Firstly, the Ziegler-Natta catalyst was chemical bonded inside the porous polymer microspheres (PPMs) supports with different pore diameter and supports size through chemical reaction. Then slightly and highly confined polymerization occurred in the PPM-supported Ziegler-Natta catalysts. SEM results illustrated that the slightly confined polymerization was easy to obtain linear and spiral nanofibers, and the nanofibers were observed in polyethylene catalyzed by PPMs-1#/cat and PPMs-2#/cat with low pore diameter (about 23 nm). Furthermore, the highly confined polymerization produced polyethylene microspheres, which obtained through other PPM-supported Ziegler-Natta catalysts with high pore diameter. In addition, high second melting point (T_m2: up to 143.3 °C) is a unique property of the polyethylene obtained by the PPM-supported Ziegler-Natta catalyst after removing the residue through physical treatment. The high T_m2 was ascribed to low surface free energy (σ_e), which was owing to the entanglement of polyethylene polymerized in the PPMs supports with interconnected multi-modal pore structure.     

植物纤维及其提取物增强聚合物的3D打印成型研究

3D打印技术作为新型成型技术,近年来受到了巨大的关注,但常见的PLA、ABS等单体打印耗材由于其自身的不同缺点,限制了其进一步的应用。本文综述了植物纤维及其提取物增强聚合物复合材料在3D打印领域的应用研究进展,重点阐述了木纤维、竹纤维,秸秆纤维等常见植物纤维用于3D打印的研究现状,还介绍了纤维素、木质素、半纤维素等植物纤维提取物增强聚合物用于3D打印的研究情况。同时对植物纤维/聚合物材料存在的一些问题及改性方法进行了分析与展望。     

Inkjet Printing of Polymer Micro‐Arrays and Libraries: Instrumentation,Requirements, and Perspectives

This article reviews commercially available instrumentation for inkjet printing of polymer micro‐arrays for combinatorial materials research, and requirements thereof. These include a print head positioning accuracy better than 10 μm and a minimum drop volume of 100 pL. Commercially available instruments that fulfill these requirements can be divided into two categories, depending on whether they receive ink from a reservoir (dispense mode) or through fluid aspiration (pipette mode). Instruments belonging to the first category are restricted to the preparation of polymer blend micro‐arrays. These consist of a few substances mixed in various ratios. The other instruments can be used for the preparation of both micro‐arrays of large numbers of different pure polymer compounds and polymer blend micro‐arrays. Moreover, ways to mix compounds are discussed.

     

Emission Profiles of Volatiles during 3D Printing with ABS,ASA, Nylon,and PETG Polymer Filaments

In this short communication we characterize the emission of volatile organic compounds (VOCs) from fused filament fabrication (FFF) 3D printing using four polymer materials, namely polyethylene terephthalate glycol-modified (PETG), acrylonitrile styrene acrylate (ASA), Nylon, and acrylonitrile butadiene styrene (ABS). Detailed emission profiles are obtained during thermal degradation of the polymers as a function of temperature and also in real-time during 3D printing. Direct quantitative measurement was performed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Qualitative determination of the volatiles emitted from the printed elements at various temperatures was accomplished using gas chromatography-mass spectrometry (GC-MS). The emission rates of VOCs differ significantly between the different polymer filaments, with the emission from Nylon and PETG more than an order of magnitude lower than that of ABS.     

Synthesis and Characterization of Hydrophilic Trityl Radical TFO for Biomedical and Biophysical Applications

Tetrathiatriarylmethyl (TAM, trityl) radicals have found wide applications as spin probes/labels for EPR spectroscopy and imaging, and as polarizing agents for dynamic nuclear polarization. The high hydrophilicity of TAM radicals is essential for their biomedical applications. However, the synthesis of hydrophilic TAM radicals (e.g., OX063) is extremely challenging and has only been reported in the patent literature, to date. Herein, an efficient synthesis of a highly water-soluble TAM radical bis(8-carboxyl-2,2,6,6-tetramethylbenzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)-mono-(8-carboxyl-2,2,6,6-tetrakis(2-hydroxyethyl)benzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)methyl (TFO), which contains four additional hydroxylethyl groups, relative to the Finland trityl radical CT-03, is reported. Similar to OX063, TFO exhibits excellent properties, including high water solubility in phosphate buffer, low log P, low pK_a, long relaxation times, and negligible binding with bovine serum albumin. On the other hand, TFO has a sharper EPR line and higher O₂ sensitivity than those of OX063. Therefore, in combination with its facile synthesis, TFO should find wide applications in magnetic resonance related fields and this synthetic approach would shed new light on the synthesis of other hydrophilic TAM radicals.     

Synthesis,Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.     

Design,Synthesis, and Biomedical Applications of Glycotripods for Targeting Trimeric Lectins

In the last decades, various efforts have been made to synthesize optimal glycotripods for targeting trimeric glycoproteins like asialoglycoprotein receptor, hemagglutinin, and langerin. All these trimeric glycoproteins have sugar binding pockets which are highly selective for a particular carbohydrate ligand. Optimized glycotripods are high affinity binders and have been used for delivering drugs or even applied as drug candidates. The selection of the tripodal base scaffold together with the length and flexibility of the linker between the scaffold and sugar residue, as important design parameters are discussed in this review.     

Gold Nanorod/Fe3O4 Nanoparticle “Nano‐Pearl‐Necklaces” for Simultaneous Targeting,Dual‐Mode Imaging,and Photothermal Ablation of Cancer Cells

Gold and pearls : Multifunctional nanoparticles, each composed of a single, amine‐modified gold nanorod, decorated with multiple “pearls” of Fe₃O₄ nanoparticles capped with carboxy groups, are prepared. Their effectiveness in simultaneous targeting, dual‐mode imaging, and photothermal ablation of breast cancer cells is demonstrated.