Mixed‐Matrix Membranes

Research into extended porous materials such as metal‐organic frameworks (MOFs) and porous organic frameworks (POFs), as well as the analogous metal‐organic polyhedra (MOPs) and porous organic cages (POCs), has blossomed over the last decade. Given their chemical and structural variability and notable porosity, MOFs have been proposed as adsorbents for industrial gas separations and also as promising filler components for high‐performance mixed‐matrix membranes (MMMs). Research in this area has focused on enhancing the chemical compatibility of the MOF and polymer phases by judiciously functionalizing the organic linkers of the MOF, modifying the MOF surface chemistry, and, more recently, exploring how particle size, morphology, and distribution enhance separation performance. Other filler materials, including POFs, MOPs, and POCs, are also being explored as additives for MMMs and have shown remarkable anti‐aging performance and excellent chemical compatibility with commercially available polymers. This Review briefly outlines the state‐of‐the‐art in MOF‐MMM fabrication, and the more recent use of POFs and molecular additives.     

Defect‐Free Mixed‐Matrix Membranes with Hydrophilic Metal‐Organic Polyhedra for Efficient Carbon Dioxide Separation

Defect‐free mixed‐matrix membranes (MMMs) were prepared by incorporating hydrophilic metal‐organic polyhedra (MOPs) into cross‐linked polyethylene oxide (XLPEO) for efficient CO₂ separation. Hydrophilic MOPs with triethylene glycol pendant groups, which were assembled by 5‐tri(ethylene glycol) monomethyl ether isophthalic acid and Cu^II ions, were uniformly dispersed in XLPEO without particle agglomeration. Compared to conventional neat XLPEO, the homogenous dispersion of EG₃‐MOPs in XLPEO enhanced CO₂ permeability of MMMs. Upon increasing the amount of EG₃‐MOPs, the membrane performance such as CO₂/N₂ selectivity was steadily improved because of unsaturated Cu^II sites at paddle‐wheel units, which was confirmed by Cu K‐edge XANES and TPD analysis. Therefore, such defect‐free MMMs with unsaturated metal sites would contribute to enhance CO₂ separation performance.     

Metal–Organic‐Framework‐based Gas Chromatographic Separation

Metal‐organic frameworks (MOFs) have been applied in various fields because of their fascinating structures and excellent properties. MOFs can serve as stationary phases in gas chromatography (GC), which has led to exceptional improvements of performance. Here, we summarize the application of MOFs in GC based on the classification of analytes. The advantages and separation mechanism of MOFs as stationary phases in GC are discussed in combination with the characteristics and structures of MOFs. The limitations are also summarized in this review, which can provide prospects on further research for the applications of MOFs.     

In Situ Modification of Metal–Organic Frameworks in Mixed‐Matrix Membranes

Processable films of metal–organic frameworks (MOFs) have been long sought to advance the application of MOFs in various technologies from separations to catalysis. Herein, MOF–polymer mixed‐matrix membranes (MMMs) are described, formed on several substrates using a wide variety of MOF materials. These MMMs can be delaminated from their substrates to create free‐standing MMMs that are mechanically stable and pliable. The MOFs in these MMMs remain highly crystalline, porous, and accessible for further chemical modification through postsynthetic modification (PSM) and postsynthetic exchange (PSE) processes. Overall, the findings here demonstrate a versatile approach to preparing stable functional MMMs that should contribute significantly to the advancement of these materials.     

Azine‐Linked Covalent Organic Framework (COF)‐Based Mixed‐Matrix Membranes for CO2/CH4 Separation

Mixed‐matrix membranes (MMMs) comprising Matrimid and a microporous azine‐linked covalent organic frameworks (ACOF‐1) were prepared and tested in the separation of CO₂ from an equimolar CO₂/CH₄ mixture. The COF‐based MMMs show a more than doubling of the CO₂ permeability upon 16 wt % ACOF‐1 loading together with a slight increase in selectivity compared to the bare polymer. These results show the potential of COFs in the preparation of MMMs.     

Etched ZIF-8 as a Filler in Mixed-Matrix Membranes for Enhanced CO2/N2 Separation

Zeolite ZIF-8 has been etched with acid to form microporous ZIF-8-E crystals. These were then introduced into a polyethersulfone (PES) membrane matrix to enhance its CO₂/N₂ separation performance. Open through pores of size about 100 nm formed in the ZIF-8 crystals allow the ingrowth of polyethersulfone chains, ensuring a reduction in the number of nonselective voids, thereby achieving better interaction between ZIF-8-E and PES. As a result, the CO₂/N₂ separation performance of the ZIF-8-E/PES membrane increased significantly, showing a CO₂ permeability of 15.7 Barrer and a CO₂/N₂ ideal selectivity of 6.5.     

A Porous Zirconium‐Based Metal‐Organic Framework with the Potential for the Separation of Butene Isomers

By using a novel C₃‐symmetrical tricarboxylate (4,4′,4′′‐benzene‐1,3,5‐triyl‐1,1′,1′′‐trinaphthoic acid), a novel zirconium‐based metal‐organic framework ZJNU‐30 was solvothermally synthesized and structurally characterized. Single‐crystal X‐ray structural analyses show that ZJNU‐30 consists of Zr₆‐based nodes connected by the organic linkers to form a (3,8)‐connected network featuring the coexistence of two different polyhedral cages: octahedral and cuboctahedral cages with the dimensions of about 14 and 22 Å, respectively. Remarkably, ZJNU‐30 is very stable when exposed to air for one month. More importantly, with a moderately high surface area, hierarchical pore structures, and an aromatic‐rich pore surface in the framework, ZJNU‐30 , after activation, exhibits a promising potential for the selective adsorptive separation of industrially important butene isomers consisting of cis‐2‐butene, trans‐2‐butene, 1‐butene, and iso‐butene at ambient temperature. This separation was established exclusively by gas adsorption isotherms and simulated breakthrough experiments. To the best of our knowledge, this is the first study investigating porous metal‐organic frameworks for butene‐isomer separation.     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10^?7 mol m^?2 s^?1 Pa^?1 and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.     

Preparation and Gas Separation Properties of Metal‐Organic Framework Membranes

Continuous and intergrown metal‐organic framework (MOF) membranes, MIL‐100(In) (MIL represents Materials Institute Lavoisier), were prepared directly on porous anodic alumina oxide (AAO) membranes using an in situ crystallization method. The pore surface of MIL‐100(In) is conferred with polarity due to the presence of the 1, 3,5‐benzenetricarboxylic acid. The thickness of MIL‐100(In) membranes was tuned by varying the reactant concentration of indium chloride and 1, 3,5‐benzenetricarboxylic acid. Single gas permeation measurements on this MOF membrane indicate the large permeances of 0.90 × 10^–6 and 0.81 × 10^–6 mol · m^–2·s^–1·Pa^–1 for CO₂ and CH₄, and relatively high ideal selective factors of 3.75 and 3.38 for CO₂/N₂ and CH₄/N₂, respectively.     

Microporous Metal–Organic Frameworks for Gas Separation

Microporous metal–organic frameworks (MOFs) are comparatively new porous materials. Because the pores within such MOFs can be readily tuned through the interplay of both metal‐containing clusters and organic linkers to induce their size‐selective sieving effects, while the pore surfaces can be straightforwardly functionalized to enforce their different interactions with gas molecules, MOF materials are very promising for gas separation. Furthermore, the high porosities of such materials can enable microporous MOFs with optimized gas separation selectivity and capacity to be targeted. This Focus Review highlights recent significant advances in microporous MOFs for gas separation.     

Chiral Recognition and Separation by Chirality‐Enriched Metal–Organic Frameworks

Endowed with chiral channels and pores, chiral metal–organic frameworks (MOFs) are highly useful; however, their synthesis remains a challenge given that most chiral building blocks are expensive. Although MOFs with induced chirality have been reported to avoid this shortcoming, no study providing evidence for the ee value of such MOFs has yet been reported. We herein describe the first study on the efficiency of chiral induction in MOFs using inexpensive achiral building blocks and fully recoverable chiral dopants to control the handedness of racemic MOFs. This method yielded chirality‐enriched MOFs with accessible pores. The ability of the materials to form host–guest complexes was probed with enantiomers of varying size and coordination and in solvents with varying polarity. Furthermore, mixed‐matrix membranes (MMMs) composed of chirality‐enriched MOF particles dispersed in a polymer matrix demonstrated a new route for chiral separation.     

Fabrication of Ultrathin Membranes Using 2D-MOF Nanosheets for Tunable Gas Separation

Two-dimensional (2D) metal-organic frameworks (MOF) nanosheets have emerged as novel membrane materials for gas separation. However, the development of ultrathin MOF membranes with tunable separation performances is still a challenge. Herein, we developed a facile GO-assisted restacking method to fabricate defect-free membranes with monolayer Zr-BTB nanosheets. Obtained ultrathin membranes ranging from 130 nm to 320 nm show tunable separation performances and exceed the 2008 Robeson upper bound by changing the amount of nanolayers in vertical stacking direction. Furthermore, a heating filtration method was used to change the restacking process of nanosheets in the horizontal direction. As a result, H₂/CO₂ selectivity can be enhanced by two times with the same membrane thickness (130 nm) and H₂ permeance is almost maintained to be 7.0×10⁻⁷ mol m⁻² s⁻¹ pa⁻¹. This method may provide a possible way to efficiently tune the gas separation performances of MOF membranes.     

A Drying‐Free,Water‐Based Process for Fabricating Mixed‐Matrix Membranes with Outstanding Pervaporation Performance

Despite much progress in the development of mixed matrix membranes (MMMs) for many advanced applications, the synthesis of MMMs without particle agglomeration or phase separation at high nanofiller loadings is still challenging. In this work, we synthesized nanoporous zeolitic imidazole framework (ZIF‐8) nanoparticles with a particle size of 60 nm and a pore size of 0.34 nm in water and directly added them into an aqueous solution of the organic polymer poly(vinyl alcohol) (PVA) without an intermediate drying process. This approach led to a high‐quality PVA/ZIF‐8 MMM with enhanced performance in ethanol dehydration by pervaporation. The permeability of this MMM is three times higher than that of pristine PVA, and the separation factor is nearly nine times larger than that of pristine PVA. The significantly improved separation performance was attributed to the increase in the fractional free volume in the membranes.     

Two‐Dimensional Microporous Material‐based Mixed Matrix Membranes for Gas Separation

Since the discovery of graphene and its derivatives, the development and application of two‐dimensional (2D) materials have attracted enormous attention. 2D microporous materials, such as metal‐organic frameworks (MOFs), covalent organic frameworks (COFs), graphitic carbon nitride (g‐C₃N₄) and so on, hold great potential to be used in gas separation membranes because of their high aspect ratio and homogeneously distributed nanometer pores, which are beneficial for improving gas permeability and selectivity. This review briefly summarizes the recent design and fabrication of 2D microporous materials, as well as their applications in mixed matrix membranes (MMMs) for gas separation. The enhanced separation performances of the membranes and their long‐term stability are also introduced. Challenges and the latest development of newly synthesized 2D microporous materials are finally discussed to foresee the potential opportunities for 2D microporous material‐based MMMs.     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).     

Amine‐Appended Hierarchical Ca‐A Zeolite for Enhancing CO2/CH4 Selectivity of Mixed‐Matrix Membranes

An amine‐appended hierarchical Ca‐A zeolite that can selectively capture CO₂ was synthesized and incorporated into inexpensive membrane polymers, in particular polyethylene oxide and Matrimid, to design mixed‐matrix membranes with high CO₂/CH₄ selectivities. Binary mixture permeation testing reveals that amine‐appended mesoporous Ca‐A is highly effective in improving CO₂/CH₄ selectivity of polymeric membranes. In particular, the CO₂/CH₄ selectivity of the polyethylene oxide membrane increases from 15 to 23 by incorporating 20 wt % amine‐appended Ca‐A zeolite. Furthermore, the formation of filler/polymer interfacial defects, which is typically found in glassy polymer‐zeolite pairs, is inhibited owing to the interaction between the amine groups on the external surface of zeolites and polymer chains. Our results suggest that the amine‐appended hierarchial Ca‐A, which was utilized in membrane fabrication for the first time, is a good filler material for fabricating a CO₂‐selective mixed‐matrix membrane with defect‐free morphology.     

Chemically Stable Covalent Organic Framework (COF)‐Polybenzimidazole Hybrid Membranes: Enhanced Gas Separation through Pore Modulation

Highly flexible, TpPa‐1@PBI‐BuI and TpBD@PBI‐BuI hybrid membranes based on chemically stable covalent organic frameworks (COFs) could be obtained with the polymer. The loading obtained was substantially higher (50 %) than generally observed with MOFs. These hybrid membranes show an exciting enhancement in permeability (about sevenfold) with appreciable separation factors for CO₂/N₂ and CO₂/CH₄. Further, we found that with COF pore modulation, the gas permeability can be systematically enhanced.     

Selective Separation of Isomeric Dicarboxylic Acid by the Preferable Crystallization of Metal‐Organic Frameworks

Simple and effective separation of isomeric organic molecules is an important but challenging task. Herein, we successfully developed a selective crystallization strategy to separate the mixtures of isomeric dicarboxylic acids (DCAs) for the first time. The target DCAs could be preferably combined with crystallization inducer of Zr⁴⁺ ions to form a pre‐designed metal‐organic frameworks (MOFs) crystal structure whereas the entry of non‐target isomeric DACs into the MOFs lattice could be exclusively inhibited. Several isomeric pairs were exemplified to verify the extensibility and validity of the developed strategy.