Stereoselective Synthesis of α‐3‐Deoxy‐D‐manno‐oct‐2‐ulosonic Acid (α‐Kdo) Glycosides Using 5,7‐O‐Di‐tert‐butylsilylene‐Protected Kdo Ethyl Thioglycoside Donors

An efficient methodology for the synthesis of α‐Kdo glycosidic bonds has been developed with 5,7‐O‐di‐tert‐butylsilylene (DTBS) protected Kdo ethyl thioglycosides as glycosyl donors. The approach permits a wide scope of acceptors to be used, thus affording biologically significant Kdo glycosides in good to excellent chemical yields with complete α‐selectivity. The synthetic utility of an orthogonally protected Kdo donor has been demonstrated by concise preparation of two α‐Kdo‐containing oligosaccharides.     

Synthesis of Chlamydia Lipopolysaccharide Haptens through the use of α‐Specific 3‐Iodo‐Kdo Fluoride Glycosyl Donors

A scalable approach towards high‐yielding and (stereo)selective glycosyl donors of the 2‐ulosonic acid Kdo (3‐deoxy‐D ‐manno‐oct‐2‐ulosonic acid) is a fundamental requirement for the development of vaccines against Gram‐negative bacteria. Herein, we disclose a short synthetic route to 3‐iodo Kdo fluoride donors from Kdo glycal esters that enable efficient α‐specific glycosylations and significantly suppress the elimination side reaction. The potency of these donors is demonstrated in a straightforward, six‐step synthesis of a branched Chlamydia‐related Kdo‐trisaccharide ligand without the need for protecting groups at the Kdo glycosyl acceptor. The approach was further extended to include sequential iteration of the basic concept to produce the linear Chlamydia‐specific α‐Kdo‐(2→8)‐α‐Kdo‐(2→4)‐α‐Kdo trisaccharide in a good overall yield.     

Conformational analysis of the disaccharide methyl α‐d‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d‐mannopyranoside monohydrate

The crystal structure of methyl α‐d ‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₆O₁₂·H₂O, ( II ), has been determined and the structural parameters for its constituent α‐d ‐mannopyranosyl residue compared with those for methyl α‐d ‐mannopyranoside. Mono‐O‐acetylation appears to promote the crystallization of ( II ), inferred from the difficulty in crystallizing methyl α‐d ‐mannopyranosyl‐(1→3)‐β‐d ‐mannopyranoside despite repeated attempts. The conformational properties of the O‐acetyl side chain in ( II ) are similar to those observed in recent studies of peracetylated mannose‐containing oligosaccharides, having a preferred geometry in which the C2—H2 bond eclipses the C=O bond of the acetyl group. The C2—O2 bond in ( II ) elongates by ～0.02 Å upon O‐acetylation. The phi (?) and psi (ψ) torsion angles that dictate the conformation of the internal O‐glycosidic linkage in ( II ) are similar to those determined recently in aqueous solution by NMR spectroscopy for unacetylated ( II ) using the statistical program MA′AT, with a greater disparity found for ψ (Δ = ～16°) than for ? (Δ = ～6°).     

Synthesis of benzyl O-(2,3,3'-tri-O-acetyl-β-D-apiofuranosyl)-(1→3)-2,4-di-O-benzoyl-α-D-xylopyranoside and its X-ray structure

The protected apiose-containing disaccharide, benzyl O-(2,3, 3'-tri-O-acetyl-β-D-apiofuranosyl)-( 1→3)-2, 4-di-O-benzoyl-α-D-xylopyranoside, was synthesized and its X-ray structure provided.     

Methyl 4‐O‐β‐d‐galactopyranosyl α‐d‐mannopyranoside methanol 0.375‐solvate

Methyl β‐d ‐galactopyranosyl‐(1→4)‐α‐d ‐mannopyranoside methanol 0.375‐solvate, C₁₃H₂₄O₁₁·0.375CH₃OH, (I), was crystallized from a methanol–ethanol solvent system in a glycosidic linkage conformation, with ϕ′ (O5_Gal—C1_Gal—O1_Gal—C4_Man) = −68.2 (3)° and ψ′ (C1_Gal—O1_Gal—C4_Man—C5_Man) = −123.9 (2)°, where the ring is defined by atoms O5/C1–C5 (monosaccharide numbering); C1 denotes the anomeric C atom and C6 the exocyclic hydroxymethyl C atom in the βGalp and αManp residues, respectively. The linkage conformation in (I) differs from that in crystalline methyl α‐lactoside [methyl β‐d ‐galactopyranosyl‐(1→4)‐α‐d ‐glucopyranoside], (II) [Pan, Noll & Serianni (2005). Acta Cryst. C 61 , o674–o677], where ϕ′ is −93.6° and ψ′ is −144.8°. An intermolecular hydrogen bond exists between O3_Man and O5_Gal in (I), similar to that between O3_Glc and O5_Gal in (II). The structures of (I) and (II) are also compared with those of their constituent residues, viz. methyl α‐d ‐mannopyranoside, methyl α‐d ‐glucopyranoside and methyl β‐d ‐galactopyranoside, revealing significant differences in the Cremer–Pople puckering parameters, exocyclic hydroxymethyl group conformations and intermolecular hydrogen‐bonding patterns.     

Highly Efficient Regio- and Stereoselective Synthesis of β-（1 →6）-Branched β-（1 →3）-Linked Glucohexaose and Its Analogue

A β-（1→）6）-branched β-（1→）3）-linked glucohexaose （1） and its lauryl glycoside （2）, present in many biologically active polysaccharides from traditional herbal medicines such as Ganoderma lucidum, Schizophyllum commune and Lentinus edodes, were highly efficiently synthesized. Coupling of 2,3,4,6-tetra-O-benzoyl-β-D-glucopyranosyl- （1--）3）-2-O-benzoyl-4,6-O-benzylidene-a-D-glucopyranosyl trichloroacetimidate （7） with 3,6-branched acceptors 8 and 12 gave β-（1→）3）-linked pentasaccharides （9） and （13）, then via simple chemical transformation 4＇,6＇-OH pentasaccharide acceptors 10 and 14 were obtained. Regio- and stereoselective coupling of 3 with 10 and 14 gave β-（1→）3）-linked hexasaccharides （11） and （15） as the major products. Deprotection of 11 and 15 provided the target sugar 1 and 2. Thus, a new method for the preparation of this kind of compounds was developed.     

The formation of 3‐ferrocenylpyrazole‐4‐carboxylates and alkylhydrazine insertion products from α‐ferrocenylmethylidene‐β‐oxocarboxylates

The reactions of α‐ferrocenylmethylidene‐β‐oxocarboxylates ( 1 , 2 , 3a , and 3b ) with N‐methyl‐ and N‐(2‐hydroxyethyl)hydrazines ( 5a , 5b ) afford ethyl 1‐alkyl‐5‐aryl(methyl)‐3‐ferrocenylpyrazole‐4‐carboxylates ( 6a , 6b , 6c , 6d , 6e ) (～50%) and N‐alkylhydrazine insertion products, viz., ethyl (N′‐acyl‐N′‐alkylhydrazino)‐3‐ferrocenylpropanoates ( 7a , 7b , 7c , 7d , 7e ) (～20%) and 1‐acyl‐2‐(N′‐alkyl‐N′‐ethoxycarbonylhydrazino)‐2‐ferrocenylethanes ( 8a , 8b , 8c , 8d , 8e ) (～10%). The structures of the compounds obtained were established based on the spectroscopic data and X‐ray diffraction analysis (for pyrazoles 6a and 6b ). J. Heterocyclic Chem., (2011).     

2‐Amino‐8‐(2‐deoxy‐2‐fluoro‐β‐D‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one: Synthesis and Conformation of a 5‐Aza‐7‐deazaguanine Fluoronucleoside

Nucleobase‐anion glycosylation of 2‐[(2‐methyl‐1‐oxopropyl)amino]imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐one ( 6 ) with 3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐α‐D ‐arabinofuranosyl bromide ( 8 ) furnishes a mixture of the benzoyl‐protected anomeric 2‐amino‐8‐(2‐deoxy‐2‐fluoro‐D ‐arabinofuranosyl)imidazo[1,2‐a]‐1,3,5‐triazin‐4(8H)‐ones 9 / 10 in a ratio of ca. 1 : 1. After deprotection, the inseparable anomeric mixture 3 / 4 was silylated. The obtained 5‐O‐[(1,1‐dimethylethyl)diphenylsilyl] derivatives 11 and 12 were separated and desilylated affording the nucleoside 3 and its α‐D anomer 4 . Similar to 2′‐deoxy‐2′‐fluoroarabinoguanosine, the conformation of the sugar moiety is shifted from S towards N by the fluoro substituent in arabino configuration.     

Methyl 4‐O‐β‐D‐mannopyranosyl β‐D‐xylopyranoside

Methyl β‐D‐mannopyranosyl‐(1→4)‐β‐D‐xylopyranoside, C₁₂H₂₂O₁₀, (I), crystallizes as colorless needles from water, with two crystallographically independent molecules, (IA) and (IB), comprising the asymmetric unit. The internal glycosidic linkage conformation in molecule (IA) is characterized by a ϕ′ torsion angle (O5′_Man—C1′_Man—O1′_Man—C4_Xyl; Man is mannose and Xyl is xylose) of −88.38 (17)° and a ψ′ torsion angle (C1′_Man—O1′_Man—C4_Xyl—C5_Xyl) of −149.22 (15)°, whereas the corresponding torsion angles in molecule (IB) are −89.82 (17) and −159.98 (14)°, respectively. Ring atom numbering conforms to the convention in which C1 denotes the anomeric C atom, and C5 and C6 denote the hydroxymethyl (–CH₂OH) C atom in the β‐Xylp and β‐Manp residues, respectively. By comparison, the internal glycosidic linkage in the major disorder component of the structurally related disaccharide, methyl β‐D‐galactopyranosyl‐(1→4)‐β‐D‐xylopyranoside), (II) [Zhang, Oliver & Serriani (2012). Acta Cryst. C 68 , o7–o11], is characterized by ϕ′ = −85.7 (6)° and ψ′ = −141.6 (8)°. Inter‐residue hydrogen bonding is observed between atoms O3_Xyl and O5′_Man in both (IA) and (IB) [O3_Xyl...O5′_Man internuclear distances = 2.7268 (16) and 2.6920 (17) Å, respectively], analogous to the inter‐residue hydrogen bond detected between atoms O3_Xyl and O5′_Gal in (II). Exocyclic hydroxymethyl group conformation in the β‐Manp residue of (IA) is gauche–gauche, whereas that in the β‐Manp residue of (IB) is gauche–trans.     

Chemical Synthesis of Burkholderia Lipid A Modified with Glycosyl Phosphodiester‐Linked 4‐Amino‐4‐deoxy‐β‐L‐arabinose and Its Immunomodulatory Potential

Modification of the Lipid A phosphates by positively charged appendages is a part of the survival strategy of numerous opportunistic Gram‐negative bacteria. The phosphate groups of the cystic fibrosis adapted Burkholderia Lipid A are abundantly esterified by 4‐amino‐4‐deoxy‐β‐L ‐arabinose (β‐L ‐Ara4N), which imposes resistance to antibiotic treatment and contributes to bacterial virulence. To establish structural features accounting for the unique pro‐inflammatory activity of Burkholderia LPS we have synthesised Lipid A substituted by β‐L ‐Ara4N at the anomeric phosphate and its Ara4N‐free counterpart. The double glycosyl phosphodiester was assembled by triazolyl‐tris‐(pyrrolidinyl)phosphonium‐assisted coupling of the β‐L ‐Ara4N H‐phosphonate to α‐lactol of β(1→6) diglucosamine, pentaacylated with (R)‐(3)‐acyloxyacyl‐ and Alloc‐protected (R)‐(3)‐hydroxyacyl residues. The intermediate 1,1′‐glycosyl‐H‐phosphonate diester was oxidised in anhydrous conditions to provide, after total deprotection, β‐L ‐Ara4N‐substituted Burkholderia Lipid A. The β‐L ‐Ara4N modification significantly enhanced the pro‐inflammatory innate immune signaling of otherwise non‐endotoxic Burkholderia Lipid A.     

Disorder and conformational analysis of methyl β‐d‐galactopyranosyl‐(1→4)‐β‐d‐xylopyranoside

Methyl β‐d ‐galactopyranosyl‐(1→4)‐β‐d ‐xylopyranoside, C₁₂H₂₂O₁₀, (II), crystallizes as colorless needles from water with positional disorder in the xylopyranosyl (Xyl) ring and no water molecules in the unit cell. The internal glycosidic linkage conformation in (II) is characterized by a ϕ′ torsion angle (C2′_Gal—C1′_Gal—O1′_Gal—C4_Xyl) of 156.4 (5)° and a ψ′ torsion angle (C1′_Gal—O1′_Gal—C4_Xyl—C3_Xyl) of 94.0 (11)°, where the ring atom numbering conforms to the convention in which C1 denotes the anomeric C atom, and C5 and C6 denote the hydroxymethyl (–CH₂OH) C atoms in the β‐Xyl and β‐Gal residues, respectively. By comparison, the internal linkage conformation in the crystal structure of the structurally related disaccharide, methyl β‐lactoside [methyl β‐d ‐galactopyranosyl‐(1→4)‐β‐d ‐glucopyranoside], (III) [Stenutz, Shang & Serianni (1999). Acta Cryst. C 55 , 1719–1721], is characterized by ϕ′ = 153.8 (2)° and ψ′ = 78.4 (2)°. A comparison of β‐(1→4)‐linked disaccharides shows considerable variability in both ϕ′ and ψ′, with the range in the latter (∼38°) greater than that in the former (∼28°). Inter‐residue hydrogen bonding is observed between atoms O3_Xyl and O5′_Gal in the crystal structure of (II), analogous to the inter‐residue hydrogen bond detected between atoms O3_Glc and O5′_Gal in (III). The exocyclic hydroxymethyl conformations in the Gal residues of (II) and (III) are identical (gauche–trans conformer).     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Synthesis and Structure of 2‐Substituted Thieno[3′,2′:5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one Derivatives

A series of new 2‐substituted 3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐ones 8 were synthesized via an aza‐Wittig reaction. Phosphoranylideneamino derivatives 6a or 6b reacted with 4‐chlorophenyl isocyanate to give carbodiimide derivatives 7a or 7b , respectively, which were further treated with amines or phenols to give compounds 8 in the presence of a catalytic amount of EtONa or K₂CO₃. The structure of 2‐(4‐chlorophenoxy)‐3‐(4‐chlorophenyl)‐5,8,9‐trimethylthieno[3′,2′: 5,6]pyrido[4,3‐d]pyrimidin‐4(3H)‐one ( 8j ) was comfirmed by X‐ray analysis.     

Diastereo‐ and Enantioselective Intramolecular [2+2] Photocycloaddition Reactions of 3‐(ω′‐Alkenyl)‐ and 3‐(ω′‐Alkenyloxy)‐Substituted 5,6‐Dihydro‐1H‐pyridin‐2‐ones

3‐(ω′‐Alkenyl)‐substituted 5,6‐dihydro‐1H‐pyridin‐2‐ones 2 – 4 were prepared as photocycloaddition precursors either by cross‐coupling from 3‐iodo‐5,6‐dihydro‐1H‐pyridin‐2‐one ( 8 ) or—more favorably—from the corresponding α‐(ω′‐alkenyl)‐substituted δ‐valerolactams 9 – 11 by a selenylation/elimination sequence (56–62 % overall yield). 3‐(ω′‐Alkenyloxy)‐substituted 5,6‐dihydro‐1H‐pyridin‐2‐ones 5 and 6 were accessible in 43 and 37 % overall yield from 3‐diazopiperidin‐2‐one ( 15 ) by an α,α‐chloroselenylation reaction at the 3‐position followed by nucleophilic displacement of a chloride ion with an ω‐alkenolate and oxidative elimination of selenoxide. Upon irradiation at λ=254 nm, the precursor compounds underwent a clean intramolecular [2+2] photocycloaddition reaction. Substrates 2 and 5 , tethered by a two‐atom chain, exclusively delivered the respective crossed products 19 and 20 , and substrates 3 , 5 , and 6 , tethered by longer chains, gave the straight products 21 – 23 . The completely regio‐ and diastereoselective photocycloaddition reactions proceeded in 63–83 % yield. Irradiation in the presence of the chiral templates (?)‐ 1 and (+)‐ 31 at ?75 °C in toluene rendered the reactions enantioselective with selectivities varying between 40 and 85 % ee. Truncated template rac‐ 31 was prepared as a noranalogue of the well‐established template 1 in eight steps and 56 % yield from the Kemp triacid ( 24 ). Subsequent resolution delivered the enantiomerically pure templates (?)‐ 31 and (+)‐ 31 . The outcome of the reactions is compared to the results achieved with 4‐substituted 5,6‐dihydro‐1H‐pyridin‐2‐ones and quinolones.     

Chemical Synthesis and Immunological Evaluation of Helicobacter pylori Serotype O6 Tridecasaccharide O‐Antigen Containing a dd‐Heptoglycan

The development of glycoconjugate vaccines against Helicobacter pylori is challenging. An exact epitope of the H. pylori lipo‐polysaccharide (LPS) O‐antigens that contain Lewis determinant oligosaccharides and unique dd ‐heptoglycans has not yet been identified. Reported here is the first total synthesis of H. pylori serotype O6 tridecasaccharide O‐antigen containing a terminal Le^y tetrasaccharide, a unique α‐(1→3)‐, α‐(1→6)‐, and α‐(1→2)‐linked heptoglycan, and a β‐d ‐galactose connector, by an [(2×1)+(3+8)] assembly sequence. Seven oligosaccharides covering different portions of the entire O‐antigen were prepared for immunological investigations with a particular focus on elucidation of the roles of the dd ‐heptoglycan and Le^y tetrasaccharide. Glycan microarray analysis of sera from rabbits immunized with isolated serotype O6 LPS revealed a humoral immune response to the α‐(1→3)‐linked heptoglycan, a key motif for designing glycoconjugate vaccines for H. pylori serotype O6.     

具有β-(1→6)-半乳吡喃糖骨架和α-L-(1→3)-阿拉伯呋喃糖侧链的阿拉伯半乳寡糖的简易合成

4-Methoxyphenyl glycoside of β-D-Galp-(1→6)-[α-L-Araf-(1→3)-]β-D-Galp-(1→6)-β-D-Galp-(1→6)-{β-D-Galp-(1→6)-[α-L-Araf-(1→3)-]β-D-Galp-(1→6)-β-D-Galp-(1→6)-}2β-D-Galp-(1→6)-[α-L-Araf-(1→)3)-]β-D-Galp-(1→)6)-β-D-Galp was synthesized with 2,3,4,6-tetra-O-benzoyl-α-D-galactopyranosyl trichloroacetimidate (1), 6-O-acetyl-2,3,4-tri-O-benzoyl-α-D-galactopyranosyl trichloroacetimidate (11), 4-methoxyphenyl 3-O-allyl-2,4-tri-O-benzoyl-β-D-galactopyranoside (2),isopropyl 3-O-allyl-2,4-tri-O-benzoyl--thio-β-D-galactopyranoside (12),4-methoxyphenyl 2,3,4-tri-O-benzoyl-β-D-galactopyranoside (5), and 2,3,5-tri-O-benzoyl-α-L-arabinofuranosyl trichloroacetimidate (8) as the key synthons.     

Synthesis of new 2,2′‐disubstituted 5,5′‐dimethyl‐4,4′‐bitriazoles and 2‐(4‐Triazolyl)quinoxalines

Thermal rearrangement of 3‐acylisoxazole arylhydrazones allowed facile preparation of 2H‐1,2,3‐triazoles which were firstly reacted with isoamyl nitrite and then with an opportune arylhydrazine to produce the corresponding α‐hydroxyiminohydrazones 8a‐h . The reaction of compounds 8a‐h with phosphorus pentachloride afforded the desired 4,4′‐bitriazoles 1a‐h . The α‐hydroxyiminoketone derivative 7 or the α‐diketone 14 reacted easily with 1,2‐phenylenediamine to afford 1,2,3‐triazoles 2a‐c bearing the quinoxaline moiety at position 4. Improved yields of the quinoxalines 2a‐c were obtained when 1,2‐phenylenediamine was reacted with the dioxime 15.     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.     

Synthesis of β-（ 1→6）-Branched （ 1→3）-Glucononaoside with Alter-nate β- and α-Bonds in the Backbone

Lauryl glycoside of β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]α-D-Glcp-(1→3)-β-D-Glcp-(1→3)-[β-D-Glcp-(1→6)-]β-D-Glcp was synthesized through 3 3 3 strategy. 3-O-Allyl-2,4,6-tri-O-benzoyl-β-D-glucopyranosyl-(1→3)- -[2, 3, 4, 6-tetra-O-benzoyl-β-D-glucopyranosyl-(1→6)-] 1,2-O-isopropylidene-α-D-glucofuranose was used as the key intermediate which was converted to the corresponding trisaccharide donor and acceptor readily.     

Synthesis of (5′S)‐5′‐C‐Alkyl‐2′‐deoxynucleosides

We describe the synthesis of (5′S)‐5′‐C‐butylthymidine ( 5a ), of the (5′S)‐5′‐C‐butyl‐ and the (5′S)‐5′‐C‐isopentyl derivatives 16a and 16b of 2′‐deoxy‐5‐methylcytidine, as well as of the corresponding cyanoethyl phosphoramidites 9a , b and 14a , b , respectively. Starting from thymidin‐5′‐al 1 , the alkyl chain at C(5′) is introduced via Wittig chemistry to selectively yield the (Z)‐olefin derivatives 3a and 3b (Scheme 2). The secondary OH function at C(5′) is then introduced by epoxidation followed by regioselective reduction of the epoxy derivatives 4a and 4b with diisobutylaluminium hydride. In the latter step, a kinetic resolution of the diastereoisomer mixture 4a and 4b occurs, yielding the alkylated nucleoside 2a and 2b , respectively, with (5′S)‐configuration in high diastereoisomer purity (de=94%). The corresponding 2′‐deoxy‐5‐methylcytidine derivatives are obtained from the protected 5′‐alkylated thymidine derivatives 7a and 7b via known base interconversion processes in excellent yields (Scheme 3). Application of the same strategy to the purine nucleoside 2′‐deoxyadenine to obtain 5′‐C‐butyl‐2′‐deoxyadenosine 25 proved to be difficult due to the sensitivity of the purine base to hydride‐based reducing agents (Scheme 4).