Synthesis of Functional Poly(disubstituted acetylene)s through the Post‐Polymerization Modification Route

We report the recent progress in the preparation of functional poly(disubstituted acetylene)s (PDSAs) through post‐polymerization modification routes. The metathesis polymerization of disubstituted acetylene monomers activated by Mo/W–Sn complex catalysts, which do not tolerate highly polar functionalities, was assumed to be a key step in the polymer synthetic procedures. We and other groups have explored several approaches to prepare PDSAs with latent reactive functionalities, which are inactive to Mo/W–Sn complex catalysts but can be used as highly reactive sites for post‐polymerization modification. Click chemistry, Michael‐type addition reactions, the use of activated esters and other strategies are demonstrated by recently published examples. These works indicate that post‐polymerization modification is an efficient route to the synthesis of various functional PDSAs.     

Synthesis of Multivalent Organotellurium Chain‐Transfer Agents by Post‐modification and Their Applications in Living Radical Polymerization

Functionalized or multivalent organotellurium chain‐transfer agents (CTAs) for living radical polymerization were synthesized by post‐modification, which involved the condensation between a carboxylic‐acid‐functionalized CTA and various amines in excellent yields without affecting the reactive tellurium moiety. The CTAs exhibited high synthetic versatility for radical polymerization and gave structurally well‐controlled polymers, such as multiarmed polymers, from various monomers. Because all new CTAs are easily available on a large scale by simple purification, the current method significantly facilitates macromolecular engineering based on organotellurium‐mediated radical polymerization (TERP).     

Synthesis of Functional Polymers by Post‐Polymerization Modification

Post‐polymerization modification is based on the direct polymerization or copolymerization of monomers bearing chemoselective handles that are inert towards the polymerization conditions but can be quantitatively converted in a subsequent step into a broad range of other functional groups. The success of this method is based on the excellent conversions achievable under mild conditions, the excellent functional‐group tolerance, and the orthogonality of the post‐polymerization modification reactions. This Review surveys different classes of reactive polymer precursors bearing chemoselective handles and discusses issues related to the preparation of these reactive polymers by direct polymerization of appropriately functionalized monomers as well as the post‐polymerization modification of these precursors into functional polymers.     

Organoborane-mediated synthesis of functional polymers: A review

This article reviews recent advances in the synthesis of polar functional polymers via the mediation of organoborane monomers and polymers. Both direct polymerization and post-polymerization functionalization processes are described. Organoborane-assisted Ziegler–Natta, metathesis, and hydroboration (haloboration) polymerizations are presented. Moreover, the special problems and opportunities of polymer modification of olefin containing homo and copolymers by organoboranes are discussed.     

Alkene Metathesis – A Tool for the Synthesis of Conjugated Polymers

Alkene metathesis is a superb methodology. We report the progress using alkene metathesis in the synthesis of polymeric organic semiconductors. Three classes of polymers have been synthesized using acyclic diene metathesis (ADMET) or ring opening metathesis polymerization (ROMP), viz., poly(acetylene)s (PA), poly(arylene‐vinylene)s (PAV), and organometallic polymers. For PAs, ROMP of cyclooctatetraenes is best, whereas for PAV, both ADMET and indirect and direct ROMP are viable. Metathesis performs flawlessly with the correct monomers, as molybdenum and particularly the robust Ru carbenes demonstrate. When performing ROMP, one is often rewarded with structurally uniform polymers that can display very low polydispersities. Overall, metathesis is a powerful tool for the preparation of semiconducting polymers.     

Heterotelechelic Polymers by Ring‐Opening Metathesis and Regioselective Chain Transfer

Heterotelechelic polymers were synthesized by a kinetic telechelic ring‐opening metathesis polymerization method relying on the regioselective cross‐metathesis of the propagating Grubbs’ first‐generation catalyst with cinnamyl alcohol derivatives. This procedure allowed the synthesis of hetero‐bis‐end‐functional polymers in a one‐pot setup. The molecular weight of the polymers could be controlled by varying the ratio between cinnamyl alcohol derivatives and monomer. The end functional groups can be changed using different aromatically substituted cinnamyl alcohol derivatives. Different monomers were investigated and the presence of the functional groups was shown by NMR spectroscopy and MALDI‐ToF mass spectrometry. Labeling experiments with dyes were conducted to demonstrate the orthogonal addressability of both chain ends of the heterotelechelic polymers obtained.     

多力响应基团聚合物合成的研究进展

多力响应基团聚合物(MMPs)的设计与合成为高灵敏地观察和定量力化学转变及高效利用机械能提供了新机遇, 推动了聚合物力化学的发展. 本文主要介绍了后聚合改性、 逐步聚合、 开环易位聚合和活性/可控自由基聚合等4种MMPs的合成方法, 分别对这些方法的特点、 优势和适用体系进行了论述, 期望为新型机械力响应性聚合物的制备和应用提供新思路.     

Synthesis of phenylenevinylene and naphthylenevinylene homopolymers and block copolymers by ring‐opening metathesis polymerization

Homopolymers and copolymers containing phenylenevinylenes and naphthylenevinylenes can be synthesized by ring‐opening metathesis polymerization of strained monomers such as tetraoctyloxy‐substituted cyclophanedienes and naphthalenophanedienes initiated by the third‐generation Grubbs’ initiator. The resulting homopolymers exhibited low polydispersities. The block copolymers can also be synthesized by the sequential ring‐opening metathesis polymerization of two individual monomers. The structures of homopolymers and block copolymers were fully characterized by nuclear magnetic resonance spectroscopy. The molecular weight distribution of the block copolymers is relatively broad compared to their parent homopolymers possibly due to chain transfer reaction. The molar ratio of the two blocks can be tailored by the ratio of the monomers employed. The block copolymers exhibited a more efficient energy transfer in the solid state between the different blocks than those carried out in solution. The optical and electrochemical properties of the polymers were investigated and exhibited the potential uses in optoelectronics devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 67–74     

Charge‐transfer piperazine‐containing polymeric systems via ring‐opening metathesis polymerization

This article describes the synthesis of piperazine‐containing homopolymer systems via ring‐opening metathesis polymerization (ROMP). These systems were subsequently used as electron donors in the formation of charge‐transfer (CT) complexes. Using exo‐N‐(6‐bromohexyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxamide as a starting material, monomers were synthesized to act as electron donors. The amine group at the “open” end of the piperazine was either left open or alkylated with various alkyl groups. The monomers' ability to act as electron donors and their polymerization rates were studied. After initial photometric titration studies using 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) as an electron acceptor proved that these monomers would act as electron donors, they were subsequently polymerized into homopolymers via ROMP. The experimental results showed that a methanol:chloroform mixed solvent system enhanced the rate of polymerization over a single solvent (chloroform) system. Studies also showed that the alkylated piperazine‐containing monomer had a faster rate of polymerization than the secondary piperazine monomer. These monomers were used to make piperazine‐containing homopolymers via ROMP and the resulting polymers, like the monomers, also functioned as electron donors. Potential functions of these polymers include electronics, solar cells, optical systems, and biological applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5034–5043, 2009     

Cross‐metathesis functionalized exo‐olefin derivatives of lactide

Poly(lactic acid) is at the forefront of research into alternative replacements to fossil fuel derived polymers, yet preparation of derivatives of this key biodegradable polymer remain challenging. This article explores the use of two derivatives of lactide, each of which features an exocyclic olefin, and their pre‐polymerization modification by olefin cross‐metathesis. Methylenation of lactide with Tebbe's reagent generates a novel 5‐methylenated lactide monomer, (3S,6S)‐3,6‐dimethyl‐5‐methylene‐1,4‐dioxan‐2‐one, complementing the previously reported 3‐methylenated (6S)‐3‐methylene‐6‐methyl‐1,4‐dioxan‐2,5‐dione. While ring‐opening of each monomer is not productive, olefin cross‐metathesis can be used to functionalize each of the exocyclic olefins to produce a family of monomers. The ring‐opening polymerization of these new monomers, and their hydrogenated congeners, is facilitated by organo‐ and Lewis‐acid catalysts. Together, they offer a new strategy for derivatizing and altering the properties of poly(lactic acid). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 741–748     

Revisiting the Polymerization of Diphenylacetylenes with Tungsten(VI) Chloride and Tetraphenyltin: An Alternative Mechanism by a Metathesis Catalytic System

An alternative reaction mechanism of the polymerization of diphenylacetylelnes using a catalytic system composed of tungsten(VI) chloride and tetraphenyltin has been proposed through the optimization of reaction conditions and investigation of the effect of the electronic nature of diphenylacetylene monomers on the polymerizability. The detailed structures of the polymers have been suggested by mass spectrometric analysis of the obtained polymers and oligomers, which suggested that a phenyl group of tetraphenyltin has been introduced to an initiating end of the polymer chain. Mass spectrometric analysis also provided information about the termination processes of the polymerization. The experimental results strongly suggested that the polymerization of diphenylacetylenes using tungsten(VI) chloride and tetraphenyltin proceeds through a migratory insertion mechanism rather than the long‐accepted metathesis mechanism.     

季铵盐型阳离子聚合物的合成及其应用

介绍季铵盐型阳离子聚合物的合成方法,主要包括二甲基二烯丙基氯化铵、甲基丙烯酰氧乙基二甲基氯化铵、表氯醇和丙烯酰胺等单体直接聚合方法,及天然高分子和聚乙烯醇的改性制备方法等。同时总结了季铵盐型阳离子聚合物在涂料、环境、水处理等领域的应用。     

Cis-selective ring-opening metathesis polymerization with ruthenium catalysts

Cis-selective ring-opening metathesis polymerization of several monocyclic alkenes as well as norbornene and oxanorbornene-type monomers using a C-H activated, ruthenium-based metathesis catalyst is reported. The cis content of the isolated polymers depended heavily on the monomer structure and temperature. A cis content as high as 96% could be obtained by lowering the temperature of the polymerization.     

Optically Active Helical Vinylterphenyl Polymers: Chiral Teleinduction in Radical Polymerization and Tunable Stereomutation

Helical vinyl aromatic polymers are emerging as interesting chiral materials due to their dynamic tailorability, synthetic simplicity, and outstanding chemical and physical stabilities. This Personal Account discusses long‐range chirality transfer in the radical polymerization of vinylterphenyl monomers and tunable stereomutation of the resultant polymers. It begins with a general introduction to the design, synthesis, and characterization of helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutyloxy)phenyl]styrene}, the first one of this series of polymers. Then, long‐range chirality transfer during radical polymerization of terphenyl‐based vinyl monomers is explained. After that, the chiroptical property control of the resultant polymers by means of the transition from kinetically controlled conformation to thermodynamically controlled conformation and external stimulus is described. This Personal Account concludes by discussing the advantages and disadvantages of the strategy of using vinylterphenyls to obtain optically active helical polymers and providing a short outlook, especially emphasizing the importance of tacticity on the chiroptical properties of polymers.     

Towards a universal polymer backbone: design and synthesis of polymeric scaffolds containing terminal hydrogen-bonding recognition motifs at each repeating unit

Polymers containing terminal hydrogen-bonding recognition motifs based on diaminotriazine and diaminopyridine groups in their side chains for the self-assembly of appropriate receptors have been prepared by ring-opening metathesis polymerization (ROMP) of norbornenes. A new synthetic method for the preparation of norbornene monomers based on pure alkyl spacers is introduced. These monomers show unprecedented high reactivity using ROMP. To suppress self-association of diaminotriazine-based polymers, polymerizations were run in presence of N-butylthymine. The butylthymine acts as a protecting group via self-assembly onto the hydrogen-bonding sites of the polymeric scaffold, thereby solubilizing the polymer. Diaminopyridine monomers do not require the presence of a protecting group due to their low propensity to dimerize. In addition, they exhibit a high affinity for hydrogen-bonded receptors on both monomeric and polymeric level. These polymers present our first building blocks towards the design and synthesis of a "universal polymer scaffold".     

Synthesis and photophysical properties of soluble low‐bandgap thienothiophene polymers with various alkyl side‐chain lengths

We report the facile synthesis and characterization of a class of thienothiophene polymers with various lengths of alkyl side chains. A series of 2‐alkylthieno[3,4‐b]thiophene monomers (Ttx) have been synthesized in a two‐step protocol in an overall yield of 28–37%. Poly(2‐alkylthieno[3,4‐b]thiophenes) (PTtx, alkyl: pentyl, hexyl, heptyl, octyl, and tridecyl) were synthesized by oxidative polymerization with FeCl₃ or via Grignard metathesis (GRIM) polymerization methods. The polymers are readily soluble in common organic solvents. The polymers synthesized by GRIM polymerization method (PTtx‐G) have narrower molecular weight distribution (?) with lower molecular weight (M_n) than those synthesized by oxidative polymerization (PTtx‐O). The band structures of the polymers with various lengths of alkyl side chains were investigated by UV–vis spectroscopy, cyclic voltammetry, and ultraviolet photoelectron spectroscopy. These low‐bandgap polymers are good candidates for organic transistors, organic light‐emitting diodes, and organic photovoltaic cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Poly(DCAQI): Synthesis and characterization of a new redox‐active polymer

Redox‐active anthraquinone based polymers are synthesized by the introduction of a polymerizable vinyl and ethynyl group, respectively, resulting in redox‐active monomers, which electrochemical behaviors are tailored by the modification of the keto groups to N‐cyanoimine moieties. These monomers can be polymerized by free radical polymerization and Rh‐catalyzed polymerization methods, respectively. The resulting polymers are obtained in molar masses (M_n) of 4,400 to 16,800 g mol^?1 as well as high yields of up to 97%. The monomers and polymers are furthermore electrochemically characterized by cyclic voltammetry. The monomers exhibit two one‐electron redox reactions at about ?0.6 and ?1.0 V versus Fc⁺/Fc. The N‐cyanoimine units are, however, partially hydrolyzed during the polymerization step or during the electrochemical measurements and degenerate to carbonyl groups, resulting in a new reduction signal at ?1.26 V versus Fc⁺/Fc. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1998–2003     

Development of hydrogenated ring‐opening metathesis polymers

New hydrogenated ring‐opening metathesis polymers with excellent thermal and optical properties were developed. These polymers were prepared by the ring‐opening metathesis polymerization of ester‐substituted tetracyclododecene monomers followed by the hydrogenation of the main‐chain double bond. The degree of hydrogenation was an important factor for the thermal stability of the polymers, and as complete hydrogenation as possible was necessary to obtain a thermally stable polymer. The completely hydrogenated ring‐opening polymer derived from 8‐methyl‐8‐methoxycarbonyl‐substituted monomer has a glass‐transition temperature of 171 °C and a 5% weight‐loss temperature of 446 °C. This polymer has excellent thermal and optical properties because of its bulky and unsymmetrical polycyclic structure in the main chain and is an alternative to glass or other transparent polymers such as poly(methyl methacrylate) and polycarbonate resin. This polymer has also been used in a wide variety of applications, such as optical lenses, optical disks, optical films, and optical fiber. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4661–4668, 2000     

Electro‐Controlled Living Cationic Polymerization

Cationic polymerizations have long been industrialized; however, stimulus‐regulated cationic polymerization remains to be developed. An electrochemically controlled living cationic polymerization is presented for the first time. In the presence of external potential and organic‐based electrocatalyst, a series of monomers can be polymerized under a cationic chain‐transfer mechanism. The resulting polymers exhibit well‐defined molecular mass, narrow dispersity, and good chain‐end fidelity. By controlling the external potential to switch the electrocatalyst between its oxidized and reduced states, ON/OFF polymerization can be achieved. This method is a versatile way to a large range of monomers, including vinyl ether‐type and p‐substituted styrene‐type monomers. Given the sustainability feature and broad interest of electrochemical synthetic techniques, we envisaged that this method would lead a new direction of external regulated living ionic polymerization.