Achieving Simultaneous CO2 and H2S Conversion via a Coupled Solar‐Driven Electrochemical Approach on Non‐Precious‐Metal Catalysts

Carbon dioxide (CO₂) and hydrogen sulfide (H₂S) are generally concomitant with methane (CH₄) in natural gas and traditionally deemed useless or even harmful. Developing strategies that can simultaneously convert both CO₂ and H₂S into value‐added products is attractive; however it has not received enough attention. A solar‐driven electrochemical process is demonstrated using graphene‐encapsulated zinc oxide catalyst for CO₂ reduction and graphene catalyst for H₂S oxidation mediated by EDTA‐Fe²⁺/EDTA‐Fe³⁺ redox couples. The as‐prepared solar‐driven electrochemical system can realize the simultaneous conversion of CO₂ and H₂S into carbon monoxide and elemental sulfur at near neutral conditions with high stability and selectivity. This conceptually provides an alternative avenue for the purification of natural gas with added economic and environmental benefits.     

Lateral Adsorbate Interactions Inhibit HCOO− while Promoting CO Selectivity for CO2 Electrocatalysis on Silver

Ag is a promising catalyst for the production of carbon monoxide (CO) via the electrochemical reduction of carbon dioxide (CO₂ER). Herein, we study the role of the formate (HCOO^?) intermediate *OCHO, aiming to resolve the discrepancy between the theoretical understanding and experimental performance of Ag. We show that the first coupled proton‐electron transfer (CPET) step in the CO pathway competes with the Volmer step for formation of *H, whereas this Volmer step is a prerequisite for the formation of *OCHO. We show that *OCHO should form readily on the Ag surface owing to solvation and favorable binding strength. In situ surface‐enhanced Raman spectroscopy (SERS) experiments give preliminary evidence of the presence of O‐bound bidentate species on polycrystalline Ag during CO₂ER which we attribute to *OCHO. Lateral adsorbate interactions in the presence of *OCHO have a significant influence on the surface coverage of *H, resulting in the inhibition of HCOO^? and H₂ production and a higher selectivity towards CO.     

Thiol‐Assisted Synthesis of Carbon‐Supported Metal Nanoparticles for Efficient Electrocatalytic CO2 Reduction

The typical preparation route of carbon‐supported metallic catalyst is complex and uneconomical. Herein, we reported a thiol‐assisted one‐pot method by using 3‐mercaptopropionic acid (MPA) to synthesize carbon‐supported metal nanoparticles catalysts for efficient electrocatalytic reduction of carbon dioxide (CO₂RR). We found that the synthesized Au?MPA/C catalyst achieves a maximum CO faradaic efficiency (FE) of 96.2% with its partial current density of ?11.4 mA/cm², which is much higher than that over Au foil or MPA‐free carbon‐supported Au (Au/C). The performance improvement in CO₂RR over the catalyst is probably derived from the good dispersion of Au nanoparticles and the surface modification of the catalyst caused by the specific interaction between Au nanoparticles and MPA. This thiol‐assisted method can be also extended to synthesize Ag?MPA/C with enhanced CO₂RR performance.     

Ag@Bi2WO6Composites with High Visible‐Light‐Driven Photocatalytic Activities Prepared in UV Light Irradiation

Bi₂WO₆ microstructures were synthesized through hydrothermal process and Ag@Bi₂WO₆ composites were synthesized by simple UV light irradiation for 5 min using Bi₂WO₆ and AgNO₃ as raw materials. Ag@Bi₂WO₆ composites were characterized by X‐ray powder diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), and UV‐Vis absorption spectrum (UV‐Vis). Few Ag deposited on the Bi₂WO₆ leads to an increase in photocatalytic activity, which clearly indicates that the recombination of photogenerated charge carrier between the hybrid orbital of Bi6s and O2p (valence band) to the empty W5d orbital is inhibited greatly in the Ag@Bi₂WO₆ composite. In addition, a few H₂O₂ will greatly enhance photocatalytic activity of Ag@Bi₂WO₆, and the proper reason is discussed.     

Phosphite‐driven, [Cp*Rh(bpy)(H2O)]2+‐catalyzed reduction of nicotinamide and flavin cofactors: characterization and application to promote chemoenzymatic reduction reactions

The organometallic compound [Cp*Rh(bpy)(H₂O)]²⁺ is a versatile catalyst for the in situ regeneration of reduced nicotinamides and flavins by catalyzing the electron transfer between the cathode or formate to the oxidized cofactors and prosthetic groups. In the present contribution we demonstrate the feasibility of phosphite as an alternative source of reducing equivalents. Thus, [Cp*Rh(bpy)(H₂O)]²⁺ combines the catalytic activities of hydrogenases, formate and phosphite dehydrogenases in one catalyst. The catalytic properties of this novel regeneration approach are investigated, demonstrating that the general catalytic properties of [Cp*Rh(bpy)(H₂O)]²⁺ are preserved. The principal applicability to promote alcoholdehydrogenase‐catalyzed reduction reactions is demonstrated. Copyright © 2010 John Wiley & Sons, Ltd.     

A three‐dimensional supramolecular framework of silver(I), 2‐phenylquinoline‐4‐carboxylate and 4,4′‐bipyridine

A novel supramolecular framework, catena‐poly[[[aqua(2‐phenylquinoline‐4‐carboxylato‐κO)silver(I)]‐μ‐4,4′‐bipyridine‐κ²N:N′] dihydrate], {[Ag(C₁₆H₁₀NO₂)(C₁₀H₈N₂)(H₂O)]·2H₂O}_n, has been synthesized and structurally characterized. The Ag^I centres are four‐coordinated and bridged by 4,4′‐bipyridine (4,4′‐bipy) ligands to form a one‐dimensional Ag–bipy chain. The Ag–bipy chains are further linked together by intermolecular O—H...O and O—H...N hydrogen‐bonding interactions between adjacent chains, resulting in a three‐dimensional framework.     

catena‐Poly[[silver(I)‐μ‐1,3‐bis(4‐pyridyl)propane] hemi(naphthalene‐1,5‐disulfonate) dihydrate]: a three‐dimensional metallo‐supramolecular sandwich lamellar network

The title compound, {[Ag(C₁₃H₁₄N₂)](C₁₀H₆O₆S₂)_0.5·2H₂O}_n, (I), features a three‐dimensional supramolecular sandwich architecture that consists of two‐dimensional cationic layers composed of polymeric chains of silver(I) ions and 1,3‐bis(4‐pyridyl)propane (bpp) ligands, linked by Ag...Ag and π–π interactions, alternating with anionic layers in which uncoordinated naphthalene‐1,5‐disulfonate (nds²⁻) anions and solvent water molecules form a hydrogen‐bonded network. The asymmetric unit consists of one Ag^I cation linearly coordinated by N atoms from two bpp ligands, one bpp ligand, one half of an nds²⁻ anion lying on a centre of inversion and two solvent water molecules. The two‐dimensional {[Ag(bpp)]⁺}_n cationic and {[(nds)·2H₂O]²⁻}_n anionic layers are assembled into a three‐dimensional supramolecular framework through long secondary coordination Ag...O interactions between the sulfonate O atoms and Ag^I centres and through nonclassical C—H...O hydrogen bonds.     

Synthesis,Characterization, and Photocatalytic Properties of Bismuth (III)‐benzene‐1,3,5‐tricarboxylate

{[Bi(BTC)(H₂O)₂] · H₂O}_n (H₃BTC = 1,3,5‐benzenetricarboxylic acid) was synthesized by an eco‐friendly hydrothermal method and characterized by single‐crystal X‐ray diffraction, IR and UV/Vis spectroscopy, photoluminescence (PL), and thermogravimetric analyses. The complex featured a 3D metal‐organic framework with Bi₂ secondary building units. In the complex, the central Bi³⁺ is nine‐coordinate, three central Bi atoms and three BTC^3– anions are interconnected into a ring with the dimension of 7.95 × 9.89 Ų. Moreover, the complex is decomposed at over 388 °C, showing its highly thermal stability. Further, the complex exhibits photocatalytic activity for the degradation of methyl orange (MO) solution under UV light irradiation, and its structure can keep consistent with the original one after 9 h photocatalytic reaction, indicating that it is also very stable under UV light. Therefore, it could be anticipated the novel coordination complex will be a stable ultraviolet light catalyst.     

catena‐Poly­[[(di‐2‐pyridyl­amine)­silver(I)]‐μ‐nicotinato] and catena‐poly­[[(di‐2‐pyridyl­amine)silver(I)]‐μ‐2,6‐di­hydroxy­benzoato]

In catena‐poly­[[(di‐2‐pyridyl­amine‐κ²N,N′)silver(I)]‐μ‐nico­tinato‐κ²N:O], [Ag(C₆H₄NO₂)(C₁₀H₉N₃)]_n, the Ag^I atom is tetracoordinated by two N atoms from the di‐2‐pyridyl­amine (BPA) ligand [Ag—N = 2.3785 (18) and 2.3298 (18) Å] and by one N atom and one carboxyl­ate O atom from nicotinate ligands [Ag—N = 2.2827 (15) Å and Ag—O = 2.3636 (14) Å]. Bridging by nicotinate N and O atoms generates a polymeric chain structure, which extends along [100]. The carboxyl O atom not bonded to the Ag atom takes part in an intrachain C—H⋯O hydrogen bond, further stabilizing the chain. Pairs of chains are linked by N—H⋯O hydrogen bonds to generate ribbons. There are no π–π interactions in this complex. In catena‐poly­[[(di‐2‐pyridyl­amine‐κ²N,N′)silver(I)]‐μ‐2,6‐di­hydroxy­benzoato‐κ²O¹:O²], [Ag(C₇H₅O₄)(C₁₀H₉N₃)]_n, the Ag^I atom has a distorted tetrahedral coordination, with three strong bonds to two pyridine N atoms from the BPA ligand [Ag—N = 2.286 (5) and 2.320 (5) Å] and to one carboxyl­ate O atom from the 2,6‐di­hydroxy­benzoate ligand [Ag—O = 2.222 (4) Å]; the fourth, weaker, Ag‐atom coordination is to one of the phenol O atoms [Ag⋯O = 2.703 (4) Å] of an adjacent moiety, and this interaction generates a polymeric chain along [100]. Pairs of chains are linked about inversion centers by N—H⋯O hydrogen bonds to form ribbons, within which there are π–π interactions. The ribbons are linked about inversion centers by pairs of C—H⋯O hydrogen bonds and additional π–π interactions between inversion‐related pairs of 2,6‐di­hydroxy­benzoate ligands to generate a three‐dimensional network.     

Synthesis,crystal structure and studies on the interaction with albumin of a new silver(I) complex based on 2‐(4‐nitrobenzenesulfonamido)benzoic acid

In the present work, the two‐dimensional (2D) polymer poly[[μ₄‐2‐(4‐nitrobenzenesulfonamido)benzoato‐κ⁴O¹:O¹:O^1′:N⁶]silver(I)] (AgL), [Ag(C₁₃H₉N₂O₆S)]_n, was obtained from 2‐(4‐nitrobenzenesulfonamido)benzoic acid (HL), C₁₃H₁₀N₂O₆S. FT–IR, ¹H and ¹³C{¹H} NMR spectroscopic analyses were used to characterize both compounds. The crystal structures of HL and AgL were determined by single‐crystal X‐ray diffraction. In the structure of HL, O—H…O hydrogen bonds between neighbouring molecules result in the formation of dimers, while the silver(I) complex shows polymerization associated with the O atoms of three distinct deprotonated ligands (L^?). Thus, the structure of the Ag complex can be considered as a coordination polymer consisting of a one‐dimensional linear chain, constructed by carboxylate bridging groups, running parallel to the b axis. Neighbouring polymeric chains are further bridged by Ag—C monohapto contacts, resulting in a 2D framework. Fingerprint analysis of the Hirshfeld surfaces show that O…H/H…O hydrogen bonds are responsible for the most significant contacts in the crystal packing of HL and AgL, followed by the H…H and O…C/C…O interactions. The Ag…Ag, Ag…O/O…Ag and Ag…C/C…Ag interactions in the Hirshfeld surface represent 12.1% of the total interactions in the crystal packing. Studies of the interactions of the compounds with human serum albumin (HSA) indicated that both HL and AgL interact with HSA.     

A two‐dimensional undulating AgI coordination polymer constructed of Ag—C and Ag—O bonds: poly[[[μ3‐(5,6‐η):κO2:κO2‐(±)‐(1S,2S,3R,4R)‐3‐carboxy‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxylato]silver(I)] monohydrate]

The title coordination polymer, {[Ag(C₈H₇O₅)]·H₂O}_n, is built from Ag⁺ cations and singly protonated dehydronorcantharidin (SP‐DNC) anions, with a distorted trigonal‐planar geometry at the metal centre. The coordination number of Ag^I is three (with one Ag—π bond and two Ag—O bonds, one from each of three different SP‐DNC ligands), if only formal Ag–ligand bonds are considered, but can be regarded as five if longer weak Ag...O interactions are also included. The two‐dimensional corrugated‐sheet coordination polymer forms a non‐interpenetrating framework with (4.8²) topology. Disordered water molecules are sandwiched between the sheets.     

Cu2O-Ag Tandem Catalysts for Selective Electrochemical Reduction of CO2 to C2 Products

The electrochemical carbon dioxide reduction reaction (CO₂RR) to C₂ chemicals has received great attention. Here, we report the cuprous oxide (Cu₂O) nanocubes cooperated with silver (Ag) nanoparticles via the replacement reaction for a synergetic CO₂RR. The Cu₂O-Ag tandem catalyst exhibits an impressive Faradaic efficiency (FE) of 72.85% for C₂ products with a partial current density of 243.32 mA·cm⁻². The electrochemical experiments and density functional theory (DFT) calculations reveal that the introduction of Ag improves the intermediate CO concentration on the catalyst surface and meanwhile reduces the C-C coupling reaction barrier energy, which is favorable for the synthesis of C₂ products.     

Chiral one‐ and two‐dimensional silver(I)–biotin coordination polymers

Reaction of biotin {C₁₀H₁₆N₂O₃S, HL; systematic name: 5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoic acid} with silver acetate and a few drops of aqueous ammonia leads to the deprotonation of the carboxylic acid group and the formation of a neutral chiral two‐dimensional polymer network, poly[[{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}silver(I)] trihydrate], {[Ag(C₁₀H₁₅N₂O₃S)]·3H₂O}_n or {[Ag(L)]·3H₂O}_n, (I). Here, the Ag^I cations are pentacoordinate, coordinated by four biotin anions via two S atoms and a ureido O atom, and by two carboxylate O atoms of the same molecule. The reaction of biotin with silver salts of potentially coordinating anions, viz. nitrate and perchlorate, leads to the formation of the chiral one‐dimensional coordination polymers catena‐poly[[bis[nitratosilver(I)]‐bis{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] monohydrate], {[Ag₂(NO₃)₂(C₁₀H₁₆N₂O₃S)₂]·H₂O}_n or {[Ag₂(NO₃)₂(HL)₂]·H₂O}_n, (II), and catena‐poly[bis[perchloratosilver(I)]‐bis{μ₃‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}], [Ag₂(ClO₄)₂(C₁₀H₁₆N₂O₃S)₂]_n or [Ag₂(ClO₄)₂(HL)₂]_n, (III), respectively. In (II), the Ag^I cations are again pentacoordinated by three biotin molecules via two S atoms and a ureido O atom, and by two O atoms of a nitrate anion. In (I), (II) and (III), the Ag^I cations are bridged by an S atom and are coordinated by the ureido O atom and the O atoms of the anions. The reaction of biotin with silver salts of noncoordinating anions, viz. hexafluoridophosphate (PF₆⁻) and hexafluoridoantimonate (SbF₆⁻), gave the chiral double‐stranded helical structures catena‐poly[[silver(I)‐bis{μ₂‐5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] hexafluoridophosphate], {[Ag(C₁₀H₁₆N₂O₃S)₂](PF₆)}_n or {[Ag(HL)₂](PF₆)}_n, (IV), and catena‐poly[[[{5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}silver(I)]‐μ₂‐{5‐[(3aS,4S,6aR)‐2‐oxohexahydro‐1H‐thieno[3,4‐d]imidazol‐4‐yl]pentanoato}] hexafluoridoantimonate], {[Ag(C₁₀H₁₆N₂O₃S)₂](SbF₆)}_n or {[Ag(HL)₂](SbF₆)}_n, (V), respectively. In (IV), the Ag^I cations have a tetrahedral coordination environment, coordinated by four biotin molecules via two S atoms, and by two carboxy O atoms of two different molecules. In (V), however, the Ag^I cations have a trigonal coordination environment, coordinated by three biotin molecules via two S atoms and one carboxy O atom. In (IV) and (V), neither the ureido O atom nor the F atoms of the anion are involved in coordination. Hence, the coordination environment of the Ag^I cations varies from AgS₂O trigonal to AgS₂O₂ tetrahedral to AgS₂O₃ square‐pyramidal. The conformation of the valeric acid side chain varies from extended to twisted and this, together with the various anions present, has an influence on the solid‐state structures of the resulting compounds. The various O—H...O and N—H...O hydrogen bonds present result in the formation of chiral two‐ and three‐dimensional networks, which are further stabilized by C—H...X (X = O, F, S) interactions, and by N—H...F interactions for (IV) and (V). Biotin itself has a twisted valeric acid side chain which is involved in an intramolecular C—H...S hydrogen bond. The tetrahydrothiophene ring has an envelope conformation with the S atom as the flap. It is displaced from the mean plane of the four C atoms (plane B) by 0.8789 (6) Å, towards the ureido ring (plane A). Planes A and B are inclined to one another by 58.89 (14)°. In the crystal, molecules are linked via O—H...O and N—H...O hydrogen bonds, enclosing R₂²(8) loops, forming zigzag chains propagating along [001]. These chains are linked via N—H...O hydrogen bonds, and C—H...S and C—H...O interactions forming a three‐dimensional network. The absolute configurations of biotin and complexes (I), (II), (IV) and (V) were confirmed crystallographically by resonant scattering.     

A novel three‐dimensional AgI coordination polymer based on mixed naphthalene‐1,5‐disulfonate and aminoacetate ligands

The three‐dimensional coordination polymer poly[[bis(μ₃‐2‐aminoacetato)di‐μ‐aqua‐μ₃‐(naphthalene‐1,5‐disulfonato)‐hexasilver(I)] dihydrate], {[Ag₆(C₁₀H₆O₆S₂)(C₂H₄NO₂)₄(H₂O)₂]·2H₂O}_n, based on mixed naphthalene‐1,5‐disulfonate (L1) and 2‐aminoacetate (L2) ligands, contains two Ag^I centres (Ag1 and Ag4) in general positions, and another two (Ag2 and Ag3) on inversion centres. Ag1 is five‐coordinated by three O atoms from one L1 anion, one L2 anion and one water molecule, one N atom from one L2 anion and one Ag^I cation in a distorted trigonal–bipyramidal coordination geometry. Ag2 is surrounded by four O atoms from two L2 anions and two water molecules, and two Ag^I cations in a slightly octahedral coordination geometry. Ag3 is four‐coordinated by two O atoms from two L2 anions and two Ag^I cations in a slightly distorted square geometry, while Ag4 is also four‐coordinated by two O atoms from one L1 and one L2 ligand, one N atom from another L2 anion, and one Ag^I cation, exhibiting a distorted tetrahedral coordination geometry. In the crystal structure, there are two one‐dimensional chains nearly perpendicular to one another (interchain angle = 87.0°). The chains are connected by water molecules to give a two‐dimensional layer, and the layers are further bridged by L1 anions to generate a novel three‐dimensional framework. Moreover, hydrogen‐bonding interactions consolidate the network.     

Di­cyclo­hexyl­ammonium 2,4‐di­chloro­phenoxy­acetate and (2,4‐di­chloro­phenoxy­acetato‐O,O′)bis­(tri­phenylphosphine‐P)silver(I)

The monoclinic cell of di­cyclo­hexyl­ammonium 2,4‐di­chloro­phenoxy­acetate contains four C₁₂H₂₄N⁺·C₅H₈Cl₂O₃^? ion pairs. The ammonium N atom is hydrogen bonded to the oxy­gen ends of two carboxyl groups to form a 12‐membered O—C—O?HNH?O—C—O?HNH ring. In (2,4‐di­chloro­phenoxy­lacetato)­bis­(tri­phenyl­phosphine)silver(I), [Ag(C₈H₅Cl₂O₃)(C₁₈H₁₅P)₂], the carboxyl CO₂ unit chelates to the Ag atom in an anisobidentate manner [Ag—O = 2.436 (2) and 2.517 (2) Å]; the Ag atom shows distorted tetrahedral geometry.     

Cationic organotin cluster [t‐Bu2Sn(OH)(H2O)]22+2OTf−‐catalyzed one‐pot three‐component syntheses of 5‐substituted 1H‐tetrazoles and 2,4,6‐triarylpyridines in water

The cationic organotin cluster [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? is easy to prepare and stable in air. The catalytic activity of [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? as a neutral organotin Lewis acid catalyst is probed through the one‐pot three‐component syntheses of 5‐substituted 1H‐tetrazoles from aldehydes, hydroxylamine hydrochloride and sodium azide, and of 2,4,6‐triarylpyridines from aromatic aldehydes, substituted acetophenones and ammonium acetate. The reactions proceed well in the presence of 1 mol% of [t‐Bu₂Sn(OH)(H₂O)]₂²⁺2OTf^? in water and provide the corresponding 5‐substituted 1H‐tetrazoles and 2,4,6‐triarylpyridines in good to excellent yields. The method reported has several advantages such as the catalyst being neutral, low catalyst loading and use of water as a green solvent.     

A 3D Polyoxometalate‐Based Framework Constructed from Ag/trz Metal‐Organic Ribbons and P2W18 Polyoxoanions: Synthesis,Structure and Electrochemical Properties

A Wells‐Dawson Polyoxometalate‐based hybrid, Ag₉(trz)₃(Htrz)₄ (H₂O)(P₂W₁₈O₆₂)·3H₂O ( 1 ) (Htrz = 1,2,4‐1H‐triazole) was hydrothermally synthesized through using trz ligand and silver nitrate in the presence of [P₂W₁₈O₆₂]^6– polyoxoanion. In the 3D framework structure of compound 1 , two kinds of wave‐like Ag/trz chains originated from trz ligands and silver cations are aggregated in a “2+1” mode by {Ag₂/trz} linkages to result in a 1D Ag/trz metal‐organic ribbon, which is further extended into a 3D framework structure by [P₂W₁₈O₆₂]^6– polyoxoanions through Ag‐O covalent bonds. Additionally, the electrochemical properties of compound 1 have also been investigated.     

Nitrogen‐Doped Graphene Quantum Dots Enhance the Activity of Bi2O3 Nanosheets for Electrochemical Reduction of CO2 in a Wide Negative Potential Region

Large numbers of catalysts have been developed for the electrochemical reduction of CO₂ to value‐added liquid fuels. However, it remains a challenge to maintain a high current efficiency in a wide negative potential range for achieving a high production rate of the target products. Herein, we report a 2D/0D composite catalyst composed of bismuth oxide nanosheets and nitrogen‐doped graphene quantum dots (Bi₂O₃‐NGQDs) for highly efficient electrochemical reduction of CO₂ to formate. Bi₂O₃‐NGQDs demonstrates a nearly 100 % formate Faraday efficiency (FE) at a moderate overpotential of 0.7 V with a good stability. Strikingly, Bi₂O₃‐NGQDs exhibit a high activity (average formate FE of 95.6 %) from ?0.9 V to ?1.2 V vs. RHE. Additionally, DFT calculations reveal that the origin of enhanced activity in this wide negative potential range can be attributed to the increased adsorption energy of CO₂(ads) and OCHO* intermediate after combination with NGQDs.     

Comparison of the hydrogen‐bond patterns in 2‐amino‐1,3,4‐thiadiazolium hydrogen oxalate, 2‐amino‐1,3,4‐thiadiazole–succinic acid (1/2), 2‐amino‐1,3,4‐thiadiazole–glutaric acid (1/1) and 2‐amino‐1,3,4‐thiadiazole–adipic acid (1/1)

The X‐ray single‐crystal structure determinations of the chemically related compounds 2‐amino‐1,3,4‐thiadiazolium hydrogen oxalate, C₂H₄N₃S⁺·C₂HO₄⁻, (I), 2‐amino‐1,3,4‐thiadiazole–succinic acid (1/2), C₂H₃N₃S·2C₄H₆O₄, (II), 2‐amino‐1,3,4‐thiadiazole–glutaric acid (1/1), C₂H₃N₃S·C₅H₈O₄, (III), and 2‐amino‐1,3,4‐thiadiazole–adipic acid (1/1), C₂H₃N₃S·C₆H₁₀O₄, (IV), are reported and their hydrogen‐bonding patterns are compared. The hydrogen bonds are of the types N—H...O or O—H...N and are of moderate strength. In some cases, weak C—H...O interactions are also present. Compound (II) differs from the others not only in the molar ratio of base and acid (1:2), but also in its hydrogen‐bonding pattern, which is based on chain motifs. In (I), (III) and (IV), the most prominent feature is the presence of an R₂²(8) graph‐set motif formed by N—H...O and O—H...N hydrogen bonds, which are present in all structures except for (I), where only a pair of N—H...O hydrogen bonds is present, in agreement with the greater acidity of oxalic acid. There are nonbonding S...O interactions present in all four structures. The difference electron‐density maps show a lack of electron density about the S atom along the S...O vector. In all four structures, the carboxylic acid H atoms are present in a rare configuration with a C—C—O—H torsion angle of ∼0°. In the structures of (II)–(IV), the C—C—O—H torsion angle of the second carboxylic acid group has the more common value of ∼|180|°. The dicarboxylic acid molecules are situated on crystallographic inversion centres in (II). The Raman and IR spectra of the title compounds are presented and analysed.     

Poly[μ7‐sulfanediyldiacetato‐disilver(I)]

In the title coordination polymer, [Ag₂(C₄H₄O₄S)], each Ag^I cation is four‐coordinated by three of the four carboxylate O atoms and the S atom from symmetry‐related sulfanediyldiacetate ligands, thus defining a distorted tetrahedral geometry at the metal centre. The Ag^I cations are bridged by sulfanediyldiacetate groups, leading to a two‐dimensional layer structure. These layers are interconnected via Ag—S bonds to form a three‐dimensional coordination polymer network overall.