Self‐Reporting Inhibitors: A Single Crystallization Process To Obtain Two Optically Pure Enantiomers

Collection of two optically pure enantiomers in a single crystallization process can significantly increase the chiral separation efficiency but this is difficult to realize. Now a self‐reporting strategy is presented for visualizing the crystallization process by a dyed self‐assembled inhibitor made from the copolymers with tri(ethylene glycol)‐grafting polymethylsiloxane as the main chain and poly(N⁶‐methacryloyl‐l ‐lysine) as side chains. When applied with seeds together for the fractional crystallization of conglomerates, the inhibitors can label the formation of the secondary crystals and guide the complete separation process of two enantiomers with colorless crystals as the first product and red crystals as the second. This method leads to high optical purity of d /l ‐Asn?H₂O (99.9 % ee for d ‐crystals and 99.5 % for l ‐crystals) in a single crystallization process. It requires a small amount of additives and shows excellent recyclability.     

Mechanism of Crystalline Self‐Assembly in Aqueous Medium: A Combined Cryo‐TEM/Kinetic Study

Understanding the crystallization of organic molecules is a long‐standing challenge. Herein, a mechanistic study on the self‐assembly of crystalline arrays in aqueous solution is presented. The crystalline arrays are assembled from perylene diimide (PDI) amphiphiles bearing a chiral N‐acetyltyrosine side group connected to the PDI aromatic core. A kinetic study of the crystallization process was performed using circular dichroism spectroscopy combined with time‐resolved cryogenic transmission electron microscopy (cryo‐TEM) imaging of key points along the reaction coordinate, and molecular dynamics simulation of the initial stages of the assembly. The study reveals a complex self‐assembly process starting from the formation of amorphous aggregates that are transformed into crystalline material through a nucleation–growth process. Activation parameters indicate the key role of desolvation along the assembly pathway. The insights from the kinetic study correlate well with the structural data from cryo‐TEM imaging. Overall, the study reveals four stages of crystalline self‐assembly: 1) collapse into amorphous aggregates; 2) nucleation as partial ordering; 3) crystal growth; and 4) fusion of smaller crystalline aggregates into large crystals. These studies indicate that the assembly process proceeds according to a two‐step crystallization model, whereby initially formed amorphous material is reorganized into an ordered system. This process follows Ostwald’s rule of stages, evolving through a series of intermediate phases prior to forming the final structure, thus providing an insight into the crystalline self‐assembly process in aqueous medium.     

Facile Fabrication of Nanorod‐Assembled Fluorine‐Substituted Hydroxyapatite (FHA) Microspheres

Nanorod‐assembled FHA microspheres with different F contents were for the first time prepared through a facile one‐step hydrothermal method. The effect of the reaction time and pH value of reaction solutions on the FHA morphology was investigated to elucidate the self‐assembly process of FHA microspheres. The results showed pH values had significant effect on the morphology of the formed FHA crystals, which were self‐assembled into sphere‐like sturctures at high pH conditions and rod‐like structures at low pH values. The results suggested that formation of FHA crystals with varied morphology may be directly related to Ca²⁺ release kinetics from EDTA‐Ca‐Na₂ at different pH conditions. Furthermore, it was found that the chemical stability of FHA microspheres was dependent on the F content in the materials, and high F contents in FHA microspheres lead to improved chemical stability. These results suggest that the prepared self‐assembled FHA microspheres may be used for teeth substitution materials due to their unique hierarchical structures and controllable chemical stability.     

Guest⊂Guest⊂Host Multicomponent Molecular Crystals: Entrapment of Guest⊂Guest in Honeycomb Networks Formed by Self‐Assembly of 1,3,5‐Tri(4‐hydroxyaryl)benzenes

Sterically‐engineered rigid trigonal molecular modules based on 1,3,5‐tri(4‐hydroxyphenyl)benzenes H1 and H2 undergo O‐H???O hydrogen‐bonded self‐assembly into eight‐fold catenated hexagonal (6,3) and two‐fold interpenetrated undulated square (4,4) networks, respectively. In the presence of [18]crown‐6 as a guest, the triphenol H1 is found to self‐assemble into a honeycomb network with hexagonal voids created between three triphenol building blocks. The guest [18]crown‐6 molecules are found to be nicely nested in hexagonal enclosures. The empty spaces within the crowns can be further filled with neutral (MeOH/water, MeOH/MeNO₂) or ionic guest species such as KI/KAcAc to furnish novel multicomponent assemblies, that is, guest ? guest ? host, that typify Russian dolls. In contrast, triphenol H2 is found to yield analogous multicomponent molecular crystals in which the guest crown–K⁺ acts as a spacers in the hydrogen‐bonded self‐assembly that leads to distorted chicken wire networks.     

Influence of deformation on irreversible and reversible crystallization of poly(ethylene‐co‐1‐octene)

The effect of uniaxial deformation and subsequent relaxation at ambient temperature on irreversible and reversible crystallization of homogeneous poly(ethylene‐co‐1‐octene) with 38 mol % 1‐octene melt‐crystallized at 10 K min was explored by calorimetry, X‐ray scattering, and Fourier transform infrared spectroscopy. At 298 K, the enthalpy‐based crystallinity of annealed specimens increased irreversibly by stress‐induced crystallization from initially 15% to a maximum of, at least, 19% when a permanent set of more than 200% was attained. The crystallinity increased by formation of crystals of pseudohexagonal structure at the expense of the amorphous polymer, and as a result of destruction of orthorhombic crystals. The stress‐induced increase of crystallinity was accompanied by an increase in the apparent specific heat capacity from 2.44 to about 2.59 J g^?1 K^?1, which corresponds to an increase of the total reversibility of crystallization from, at least, 0.10 to 0.17% K^?1. The specific reversibility calculated for 100% crystallinity increased from 0.67 to 0.89% K^?1 and points to a changed local equilibrium at the interface between the crystal and amorphous phases. The deformation resulted in typical changes of the phase structure and crystal morphology that involve orientation and destruction of crystals as well as the formation of fibrils. The effect of the decrease of the entropy of the strained melt on the reversibility of crystallization and melting is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1223–1235, 2002     

Extended‐chain crystals in high‐pressure crystallized poly(ethylene terephthalate)/bisphenol a polycarbonate blends

Morphologies of extended‐chain crystals with different characteristics were observed with scanning electron microscopy (SEM) in the high‐pressure crystallized polyethylene terephthalate/polycarbonate (PET/PC) blends. The crystals memorize their nucleation and growth process, which reveal an involvement of different mechanisms simultaneously. The presence of sliding diffusion during crystal thickening is indicated by a wedge shape of some crystals, while bent crystals suggest the occurrence of transesterification in the formation of the large extended‐chain crystals. The observation of two morphological features on one group of crystals shows that two mechanisms may work simultaneously. The connection between folded‐chain and extended‐chain crystals is demonstrated by the S‐shaped extended‐chain crystals as well as their direct morphological connection observed with SEM. Though transesterification plays the essential role in the formation of the large crystals, which acts in different aspects during the process, the thermodynamic driving force is the enthalpy gain associated with large crystals. This is a high‐pressure self‐assembly with a coupling between crystallization and transesterification, which may be instructive to grow such large crystals in similar polymer systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3148–3156, 2006     

An Enantiopure Hydrogen‐Bonded Octameric Tube: Self‐Sorting and Guest‐Induced Rearrangement

The assembly of a discrete hydrogen‐bonded molecular tube from eight small identical monomers is reported. Tube assembly was accomplished by means of selective heterodimerization between isocytosine and ureidopyrimidinone hydrogen‐bonding motifs embedded in an enantiopure bicyclic building block, leading to the selective formation of an octameric supramolecular tube. Upon introduction of a fullerene guest molecule, the octameric tube rearranges into a tetrameric inclusion complex and the hydrogen‐bonding mode is switched. The dynamic behavior of the system is further explored in solvent‐ and guest‐responsive self‐sorting experiments.     

Water‐Soluble Molecular Capsules: Self‐Assembly and Binding Properties

The self‐assembly and characterization of water‐soluble calix[4]arene‐based molecular capsules ( 1?2 ) is reported. The assemblies are the result of ionic interactions between negatively charged calix[4]arenes 1 a and 1 b , functionalized at the upper rim with amino acid moieties, and a positively charged tetraamidiniumcalix[4]arene 2 . The formation of the molecular capsules is studied by ¹H NMR spectroscopy, ESI mass spectrometry (ESI‐MS), and isothermal titration calorimetry (ITC). A molecular docking protocol was used to identify potential guest molecules for the self‐assembled capsule 1 a?2 . Experimental guest encapsulation studies indicate that capsule 1 a?2 is an effective host for both charged (N‐methylquinuclidinium cation) and neutral molecules (6‐amino‐2‐methylquinoline) in water.     

Crystallization of DNA‐Capped Gold Nanoparticles in High‐Concentration,Divalent Salt Environments

The multiparametric nature of nanoparticle self‐assembly makes it challenging to circumvent the instabilities that lead to aggregation and achieve crystallization under extreme conditions. By using non‐base‐pairing DNA as a model ligand instead of the typical base‐pairing design for programmability, long‐range 2D DNA–gold nanoparticle crystals can be obtained at extremely high salt concentrations and in a divalent salt environment. The interparticle spacings in these 2D nanoparticle crystals can be engineered and further tuned based on an empirical model incorporating the parameters of ligand length and ionic strength.     

Crystallization of DNA‐Capped Gold Nanoparticles in High‐Concentration,Divalent Salt Environments

The multiparametric nature of nanoparticle self‐assembly makes it challenging to circumvent the instabilities that lead to aggregation and achieve crystallization under extreme conditions. By using non‐base‐pairing DNA as a model ligand instead of the typical base‐pairing design for programmability, long‐range 2D DNA–gold nanoparticle crystals can be obtained at extremely high salt concentrations and in a divalent salt environment. The interparticle spacings in these 2D nanoparticle crystals can be engineered and further tuned based on an empirical model incorporating the parameters of ligand length and ionic strength.     

The spectrophotometric study of a fluorescence‐enhanced inclusion complex threaded with β‐cyclodextrin: Synthesis and characterization

A novel achiral monomer end‐capped with a phenyl‐[1,3,4]oxadiazolyl group and threaded through β‐cyclodextrin was synthesized to investigate the host‐guest interactions in the inclusion complex. ¹H NMR studies revealed that one or two cyclodextrin molecules were threaded onto the synthesized achiral monomer, leading to the formation of a fibrous construction of self‐assembled inclusion complexes. The formation of a self‐assembled inclusion complex was identified using SEM and TEM. The highly ordered alignment of self‐assembled supramolecules was confirmed using polarized optical microscopy. We demonstrate an easy process for the fabrication of nano‐structured self‐assembled inclusion complexes in pyridine/ethanol (1 mL/10 mL) as well as the enhancement of photo‐induced fluorescence via monomers end‐capped with a phenyl‐[1,3,4]oxadiazolyl moiety threaded with β‐cyclodextrins. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3368–3374, 2010     

Partial miscibility in a nylon‐6/nylon‐66 blend coalesced from their common α‐cyclodextrin inclusion complex

We successfully formed a series of inclusion complexes (ICs) between an α‐cyclodextrin (α‐CD) host and two kinds of guest polymers, nylon‐6 and nylon‐66. An attempt to achieve an intimate blend between nylon‐6 and nylon‐66 through the formation and dissociation of their common α‐CD IC was made. The formation of all nylon ICs was verified with wide‐angle X‐ray diffraction, differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) and cross‐polarized/magic‐angle‐spinning ¹³C NMR spectroscopy. The experimental results demonstrated that α‐CD could only host single nylon polymer chains in the IC channels, either nylon‐6 or nylon‐66 in their own complexes, and presumably either nylon in neighboring channels of their common IC. The IC‐coalesced blend of nylon‐6 and nylon‐66 was obtained after the removal of the host cyclodextrin from their common IC with dimethyl sulfoxide. The spectroscopic results (FTIR and ¹³C NMR) illustrated that there was a degree of intimate miscibility existing in the IC‐coalesced blend, but not in the solution‐cast physical blend, although X‐ray diffraction patterns showed that the crystal structure of the IC‐coalesced blend was similar to that of the physical blend. DSC thermal profiles suggested that nylon‐66 first formed crystals during coalescence and that the subsequent crystallization of nylon‐6 was greatly affected by the nylon‐66 crystallites because of the close proximity of the two components in portions of the coalesced blend. DSC observations also demonstrated that the melting of the coalesced blend did not lead to complete phase separation of the nylon‐6 and nylon‐66 components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1369–1378, 2004     

Investigation of the deformation of homogeneous poly(ethylene‐co‐1‐octene) by wide‐ and small‐angle X‐ray scattering using synchrotron radiation

The deformation behavior of homogeneous ethylene‐1‐octene copolymers was investigated as a function of the crystallinity and the crystal size and perfection, respectively, by wide‐ and small‐angle X‐ray scattering using synchrotron radiation. The crystallinity and the crystal size and perfection, respectively, are controlled by the copolymer composition and the condition of melt crystallization. The deformation includes rotation of crystals, followed by plastic deformation and complete melting of the initial crystal population, and final formation of microfibrils. The process of rotation, plastic deformation, and melting of crystals of the initial structure is completed at lower strain if the size and perfection of the crystals, respectively, decrease, that is, if crystals thermally melt at lower temperature. The kinetics of the fibrillation of the initial structure seems independent of the crystal symmetry, that is, rotation and melting of pseudohexagonal and orthorhombic polyethylene crystals (as evident in low‐crystalline specimens) are similar. The structure of the microfibrils, before and after stress release, is almost independent of the condition of prior melt crystallization, which supports the notion of complete melting of the initial crystal population. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1919–1930, 2002     

Thermal memory of poly(3‐hydroxybutyrate) using temperature‐modulated differential scanning calorimetry

The influence of thermal history on morphology, melting, and crystallization behavior of bacterial poly(3‐hydroxybutyrate) (PHB) has been investigated using temperature‐modulated DSC (TMDSC), wide‐angle X‐ray diffraction (WAXRD) and polarized optical microscopy (POM). Various thermal histories were imparted by crystallization with continuous and different modulated cooling programs that involved isoscan and cool–heat segments. The subsequent melting behavior revealed that PHB experienced secondary crystallization during heating and the extent of secondary crystallization varied with the cooling treatment. PHB crystallized under slow, continuous, and moderate cooling rates were found to exhibit double melting behavior due to melting of TMDSC scan‐induced secondary crystals. PHB underwent considerable secondary crystallization/annealing that took place under modulated cooling conditions. The overall melting behavior was interpreted in terms of recrystallization and/or annealing of crystals. Interestingly, the PHB analyzed by temperature modulation programs showed a broad exotherm before the melting peak in the nonreversing heat capacity curve and a multiple melting reversing curve, verifying that the melting–recrystallization and remelting process was operative. WAXRD and POM studies supported the correlations from DSC and TMDSC results. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 70–78, 2006     

Metal‐Mediated Self‐Assembly of a β‐Sandwich Protein

The β‐sandwich cupredoxin Plastocyanin (Pc) was found to self‐assemble in the presence of Zn²⁺, a known mediator of protein–protein interfaces. Diffraction‐quality crystals of Pc grew from solutions containing zinc acetate as the sole precipitant. Di‐ and trinuclear zinc sites contribute to the crystal contacts in this structure. A different crystal form, also involving numerous zinc bridging ions, was obtained in the presence of poly(ethylene glycol) 8 000. Comparison of the two crystal forms reveals the effect of macromolecular crowding on self‐assembly. Solution‐state structural characterisation of the Zn²⁺‐mediated Pc oligomers was performed by using a combination of chemical shift perturbation mapping and small‐angle X‐ray scattering. The data indicate the formation of dimers in solution. The implications for metal‐mediated assembly and crystallisation are discussed.     

Preparation and characterization of poly(butylene terephthalate)/poly(ethylene terephthalate) copolymers via solid‐state and melt polymerization

To increase the T_g in combination with a retained crystallization rate, bis(2‐hydroxyethyl)terephthalate (BHET) was incorporated into poly(butylene terephthalate) (PBT) via solid‐state copolymerization (SSP). The incorporated BHET fraction depends on the miscibility of BHET in the amorphous phase of PBT prior to SSP. DSC measurements showed that BHET is only partially miscible. During SSP, the miscible BHET fraction reacts via transesterification reactions with the mobile amorphous PBT segments. The immiscible BHET fraction reacts by self‐condensation, resulting in the formation of poly(ethylene terephthalate) (PET) homopolymer. ¹H‐NMR sequence distribution analysis showed that self‐condensation of BHET proceeded faster than the transesterification with PBT. SAXS measurements showed an increase in the long period with increasing fraction BHET present in the mixtures used for SSP followed by a decrease due to the formation of small PET crystals. DSC confirmed the presence of separate PET crystals. Furthermore, the incorporation of BHET via SSP resulted in PBT‐PET copolymers with an increased T_g compared to PBT. However, these copolymers showed a poorer crystallization behavior. The modified copolymer chain segments are apparently fully miscible with the unmodified PBT chains in the molten state. Consequently, the crystal growth process is retarded resulting in a decreased crystallization rate and crystallinity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 882–899, 2007.     

Water‐Binding‐Mediated Gelation/Crystallization and Thermosensitive Superchirality

Determination of molecular structural parameters of hydrophobic cholesterol–naphthalimide conjugates for water binding capabilities as well as their moisture‐sensitive supramolecular self‐assembly were revealed. Water binding was a key factor in leading trace water‐induced crystallization against gelation in apolar solvent. Ordered water molecules entrapped in self‐assembly arrays revealed by crystal structures behave as hydrogen‐bonding linkers to facilitate three‐dimensional growth into crystals rather than one‐dimensional gel nanofibers. Water binding was also reflected on the supramolecular chirality inversion of vesicle self‐assembly in aqueous media via heating‐induced dehydration. Structural parameters that favor water binding were evaluated in detail, which could help rationally design organic building units for advancing soft materials, crystal engineering, and chiral recognition.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

Selective Encapsulation and Sequential Release of Guests Within a Self‐Sorting Mixture of Three Tetrahedral Cages

A mixture of two triamines, one diamine, 2‐formylpyridine and a Zn^II salt was found to self‐sort, cleanly producing a mixture of three different tetrahedral cages. Each cage bound one of three guests selectively. These guests could be released in a specific sequence following the addition of 4‐methoxyaniline, which reacted with the cages, opening each in turn and releasing its guest. The system here described thus behaved in an organized way in three distinct contexts: cage formation, guest encapsulation, and guest release. Such behavior could be used in the context of a more complex system, where released guests serve as signals to other chemical actors.