Sodium Cobalt Metaphosphate as an Efficient Oxygen Evolution Reaction Catalyst in Alkaline Solution

Sodium cobalt metaphosphate [NaCo(PO₃)₃] has CoO octahedra (CoO₆) and shows superior oxygen evolution reaction (OER) activity in alkaline solution, comparable with the state‐of‐the‐art precious‐metal RuO₂ catalyst. OER catalysts of this metaphosphate are prepared by combustion (Cb) and solid‐state (SS) methods. The combustion‐assisted method offers a facile synthesis and one‐step carbon composite formation. Unusually high catalytic activity was observed in NCoM‐Cb‐Ar and could be due to chemical coupling effects between NaCo(PO₃)₃ and partially graphitized carbon. This novel electrocatalyst exhibits very small overpotential of 340 mV with high mass activity of 532 A g^?1. Good charge transfer abilities and chemical coupling between NaCo(PO₃)₃ and amorphous carbon gives the OER activity in NCoM‐Cb‐Ar.     

Activating Inert,Nonprecious Perovskites with Iridium Dopants for Efficient Oxygen Evolution Reaction under Acidic Conditions

Simultaneous realization of improved activity, enhanced stability, and reduced cost remains a desirable yet challenging goal in the search of oxygen evolution electrocatalysts in acid. Herein we report iridium‐containing strontium titanates (Ir‐STO) as active and stable, low‐iridium perovskite electrocatalysts for the oxygen evolution reaction (OER) in acid. The Ir‐STO contains 57 wt % less iridium relative to the benchmark catalyst IrO₂, but it exhibits more than 10 times higher catalytic activity for OER. It is shown to be among the most efficient iridium‐based oxide electrocatalysts for OER in acid. Theoretical results reveal that the incorporation of iridium dopants in the STO matrix activates the intrinsically inert titanium sites, strengthening the surface oxygen adsorption on titanium sites and thereby giving nonprecious titanium catalytic sites that have activities close to or even better than iridium sites.     

Highly Active Cobalt‐Based Electrocatalysts with Facile Incorporation of Dopants for the Oxygen Evolution Reaction

In situ formation of electroactive cobalt species for the oxygen evolution reaction is simply achieved by applying an anodic bias to a commercially available cobalt precursor and Nafion binder mixture coated on a glassy carbon electrode. This preparation does not require energy‐intensive materials preparation steps or noble metals, yet a low overpotential of 322 mV at 10.2 mA cm^?2 and a high current density of more than 300 mA cm^?2 at 1.7 V_NHE were obtained in 1 m KOH. An operando electrochemical Raman spectroscopy study confirmed the formation of cobalt oxyhydroxide species and the iron stimulated the equilibrium state between Co³⁺ and Co⁴⁺. The iron present in the alkali electrolyte or ink solution effectively activated the cobalt species, and most of the first row transition metals could also enhance the catalytic performance. The concept presented here is one of the simplest strategies for preparing highly active electrocatalysts and is very flexible for the replacement of cobalt by other transition metals.     

Oxygen Isotope Labeling Experiments Reveal Different Reaction Sites for the Oxygen Evolution Reaction on Nickel and Nickel Iron Oxides

Nickel iron oxide is considered a benchmark nonprecious catalyst for the oxygen evolution reaction (OER). However, the nature of the active site in nickel iron oxide is heavily debated. Here we report direct spectroscopic evidence for the different active sites in Fe‐free and Fe‐containing Ni oxides. Ultrathin layered double hydroxides (LDHs) were used as defined samples of metal oxide catalysts, and ¹⁸O‐labeling experiments in combination with in situ Raman spectroscopy were employed to probe the role of lattice oxygen as well as an active oxygen species, NiOO^?, in the catalysts. Our data show that lattice oxygen is involved in the OER for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. Moreover, NiOO^? is a precursor to oxygen for Ni and NiCo LDHs, but not for NiFe and NiCoFe LDHs. These data indicate that bulk Ni sites in Ni and NiCo oxides are active and evolve oxygen via a NiOO^? precursor. Fe incorporation not only dramatically increases the activity, but also changes the nature of the active sites.     

Low‐Coordinate Iridium Oxide Confined on Graphitic Carbon Nitride for Highly Efficient Oxygen Evolution

Highly active and durable electrocatalysts for the oxygen evolution reaction (OER) is greatly desired. Iridium oxide/graphitic carbon nitride (IrO₂/GCN) heterostructures are designed with low‐coordinate IrO₂ nanoparticles (NPs) confined on superhydrophilic highly stable GCN nanosheets for efficient acidic OER. The GCN nanosheets not only ensure the homogeneous distribution and confinement of IrO₂ NPs but also endows the heterostructured catalyst system with a superhydrophilic surface, which can maximize the exposure of active sites and promotes mass diffusion. The coordination number of Ir atoms is decreased owing to the strong interaction between IrO₂ and GCN, leading to lattice strain and increment of electron density around Ir sites and hence modulating the attachment between the catalyst and reaction intermediates. The optimized IrO₂/GCN heterostructure delivers not only by far the highest mass activity among the reported IrO₂‐based catalysts but also decent durability.     

Single‐Crystal Cobalt Phosphate Nanosheets for Biomimetic Oxygen Evolution in Neutral Electrolytes

To improve energy conversion efficiency, the development of active electrocatalysts with similar structural features to photosynthesis II systems (PS‐II), which can efficiently catalyze the oxygen evolution reaction (OER), have received great research interest. Crystalline cobalt phosphate nanosheets are designed as an efficient OER catalyst in neutral media, showing outstanding performance that even outperforms the noble RuO₂ benchmark. The correlation of experimental and computational results reveals that the active sites are the edge‐sharing CoO₉ structural motif, akin to the molecular geometry of PS‐II. This unique structure can facilitate reaction intermediate adsorption and decrease the reaction energy barrier, thus improving the OER kinetics.     

HfN Nanoparticles: An Unexplored Catalyst for the Electrocatalytic Oxygen Evolution Reaction

Water electrolysis is one of the most promising methods to produce H₂ and O₂ as high potential fuels. Comparing the two half‐reactions, the oxygen evolution reaction (OER) is the more difficult to be optimized and still relies on expensive noble metal‐based catalysts such as Ru or Ir. In this paper, we prepared nanoparticles of HfN and Hf₂ON₂ and tested them for the OER for the first time. The HfN sample, in particular, showed the highest activity, requiring an overpotential of only 358 mV at 10 mA cm^?2 in Fe‐free electrolyte and, above all, exhibiting long‐term stability. This result places this system amongst one of the most promising catalysts for OER tested to date, in terms of sustainability, activity and stability. The prepared nanoparticles are small (less than 15 nm in diameter), well‐defined in shape and crystalline, and were characterised before and after electrochemical testing also via electron microscopy (EM), powder X‐ray diffraction (PXRD) and X‐ray photoelectron spectroscopy (XPS).     

In Situ Activating Ubiquitous Rust towards Low‐Cost,Efficient, Free‐Standing,and Recoverable Oxygen Evolution Electrodes

Developing effective ways to recycle rusted stainless steel and to promote the sluggish oxygen evolution reaction (OER), associated with water splitting and metal–air batteries, is important for a resource‐sustainable and environment‐friendly society. Herein, we propose a strategy to enable rusted stainless steel plate to be used as an abundant and low‐cost OER catalyst, wherein a hydrothermal combined in situ electrochemical oxidation–reduction cycle (EORC) method is developed to mimic and expedite the corrosion process, and thus activate stainless steel into free‐standing OER electrodes. Benefiting from the plentiful electrolyte‐accessible Fe/(Ni) oxyhydroxides, high conductivity and mechanical stability, this electrode exhibits remarkable OER performances including low overpotential, fast kinetics, and long‐term durability. The slight degradation in current after long‐term use can be repaired immediately in situ by an EORC.     

Electrodeposited Amorphous Tungsten‐doped Cobalt Oxide as an Efficient Catalyst for the Oxygen Evolution Reaction

Thin film of amorphous tungsten‐doped cobalt oxide (W:CoO) was successfully grown on a conducting electrode via an electrochemical oxidation process employing a [Co(WS₄)₂]^2? deposition bath. The W:CoO catalyst displays an attractive performance for the oxygen evolution reaction in an alkaline solution. In an NaOH solution of pH 13, W:CoO operates with a moderate onset overpotential of 230 mV and requires 320 mV overpotential to generate a catalytic current density of 10 mA cm^?2. A low Tafel slope of 45 mV decade^?1 was determined, indicating a rapid O₂‐evolving kinetics. The as‐prepared W:CoO belongs to the best cobalt oxide‐based catalysts ever reported for the oxygen evolution (OER) reaction.     

Ni3N as an Active Hydrogen Oxidation Reaction Catalyst in Alkaline Medium

Hydroxide‐exchange membrane fuel cells can potentially utilize platinum‐group‐metal (PGM)‐free electrocatalysts, offering cost and scalability advantages over more developed proton‐exchange membrane fuel cells. However, there is a lack of non‐precious electrocatalysts that are active and stable for the hydrogen oxidation reaction (HOR) relevant to hydroxide‐exchange membrane fuel cells. Here we report the discovery and development of Ni₃N as an active and robust HOR catalyst in alkaline medium. A supported version of the catalyst, Ni₃N/C, exhibits by far the highest mass activity and break‐down potential for a PGM‐free catalyst. The catalyst also exhibits Pt‐like activity for hydrogen evolution reaction (HER) in alkaline medium. Spectroscopy data reveal a downshift of the Ni d band going from Ni to Ni₃N and interfacial charge transfer from Ni₃N to the carbon support. These properties weaken the binding energy of hydrogen and oxygen species, resulting in remarkable HOR activity and stability.     

Surfactant‐Assisted Phase‐Selective Synthesis of New Cobalt MOFs and Their Efficient Electrocatalytic Hydrogen Evolution Reaction

Reported herein are two new polymorphic Co‐MOFs (CTGU‐5 and ‐6) that can be selectively crystallized into the pure 2D or 3D net using an anionic or neutral surfactant, respectively. Each polymorph contains a H₂O molecule, but differs dramatically in its bonding to the framework, which in turn affects the crystal structure and electrocatalytic performance for hydrogen evolution reaction (HER). Both experimental and computational studies find that 2D CTGU‐5 which has coordinates water and more open access to the cobalt site has higher electrocatalytic activity than CTGU‐6 with the lattice water. The integration with co‐catalysts, such as acetylene black (AB) leads to a composite material, AB&CTGU‐5 (1:4) with very efficient HER catalytic properties among reported MOFs. It exhibits superior HER properties including a very positive onset potential of 18 mV, low Tafel slope of 45 mV dec⁻¹, higher exchange current density of 8.6×10⁻⁴ A cm⁻², and long‐term stability.     

Dealloyed Silver Nanoparticles as Efficient Catalyst Towards Oxygen Reduction in Alkaline Solution

Silver nanoparticles(Ag NPs) were prepared by dealloying Mg-Ag alloy precursor. The obtained Ag NPs have an average ligament size of (50±10) nm. Electrocatalytic activity of Ag NPs towards oxygen reduction reaction(ORR) in 0.1 mol/L NaOH solution was assessed via cyclic voltammetry(CV), rotating ring disk elec-trode(RRDE) techniques, and electrochemical impedance spectroscopy(EIS). The electrochemical active area for the ORR was evaluated by means of the charge of the underpotential deposition(UPD) of lead(Pb) on Ag NPs. The CV results indicate that Ag NPs have a higher current density and more positive onset potential than the bulk Ag electrode. RRDE was employed to determine kinetic parameters for O₂ reduction. Ag NPs exhibit a higher kinetic current density of 25.84 mA/cm² and a rate constant of 5.45×10^-2 cm/s at -0.35 V vs. Hg/HgO. The number of electrons(n) involved in ORR is close to 4. Further, EIS data show significantly low charge transfer resistances on the Ag NPs electrode. The results indicate that the prepared Ag NPs have a high activity and are promising catalyst for ORR in alkaline solution.     

三维氮掺杂石墨烯气凝胶负载钴酞菁作为高效的氧气还原反应催化剂

通过两步溶剂热法制备得到三维氮掺杂石墨烯与吡啶氧基钴酞菁的复合材料(CoTPPc/NGA).该复合材料具有优良的氧气还原性能,在起峰电位和半波上接近商业化的铂碳催化剂(Pt/C),且在稳定性和抗甲醇性能上优于铂碳催化剂,有望代替铂碳催化剂成为碱性直接甲醇燃料电池的阴极催化剂.     

Oxygen‐Containing Amorphous Cobalt Sulfide Porous Nanocubes as High‐Activity Electrocatalysts for the Oxygen Evolution Reaction in an Alkaline/Neutral Medium

A novel OER electrocatalyst, namely oxygen‐incorporated amorphous cobalt sulfide porous nanocubes (A‐CoS_4.6O_0.6 PNCs), show advantages over the benchmark RuO₂ catalyst in alkaline/neutral medium. Experiments combining with calculation demonstrate that the desirable O* adsorption energy, associated with the distorted CoS_4.6O_0.6 octahedron structure and the oxygen doping, contribute synergistically to the outstanding electrocatalytic activity.     

Heat-Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20-(Tetra-4-aminophenyl)porphyrin (H₂TAPP) and Fe^II were used as building blocks of the aerogel, which was later heat-treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10²⁰ sites g⁻¹) capable of catalyzing the oxygen reduction reaction in alkaline solution (E_onset=0.92 V vs. RHE, TOF=0.25 e⁻ site⁻¹ s⁻¹ at 0.80 V vs. RHE).     

Laser-Ablation-Produced Cobalt Nickel Phosphate with High-Valence Nickel Ions as an Active Catalyst for the Oxygen Evolution Reaction

Cost-effective, highly efficient and stable non-noble metal-based catalysts for the oxygen evolution reaction (OER) are very crucial for energy storage and conversion. Here, an amorphous cobalt nickel phosphate (CoNiPO₄), containing a considerable amount of high-valence Ni³⁺ species as an efficient electrocatalyst for OER in alkaline solution, is reported. The catalyst was converted from Co-doped Ni₂P through pulsed laser ablation in liquid (PLAL) and exhibits a large specific surface area of 162.5 m² g⁻¹ and a low overpotential of 238 mV at 10 mA cm⁻² with a Tafel slope of 46 mV dec⁻¹, which is much lower than those of commercial RuO₂ and IrO₂. This work demonstrates that PLAL is a powerful technology for generating amorphous CoNiPO₄ with high-valence Ni³⁺, thus paving a new way towards highly effective OER catalysts.     

Ultrahigh‐Loading Zinc Single‐Atom Catalyst for Highly Efficient Oxygen Reduction in Both Acidic and Alkaline Media

Atomically dispersed Zn–N–C nanomaterials are promising platinum‐free catalysts for the oxygen reduction reaction (ORR). However, the fabrication of Zn–N–C catalysts with a high Zn loading remains a formidable challenge owing to the high volatility of the Zn precursor during high‐temperature annealing. Herein, we report that an atomically dispersed Zn–N–C catalyst with an ultrahigh Zn loading of 9.33 wt % could be successfully prepared by simply adopting a very low annealing rate of 1° min^?1. The Zn–N–C catalyst exhibited comparable ORR activity to that of Fe–N–C catalysts, and significantly better ORR stability than Fe–N–C catalysts in both acidic and alkaline media. Further experiments and DFT calculations demonstrated that the Zn–N–C catalyst was less susceptible to protonation than the corresponding Fe–N–C catalyst in an acidic medium. DFT calculations revealed that the Zn–N₄ structure is more electrochemically stable than the Fe–N₄ structure during the ORR process.     

Phase‐Selective Syntheses of Cobalt Telluride Nanofleeces for Efficient Oxygen Evolution Catalysts

Cobalt‐based nanomaterials have been intensively explored as promising noble‐metal‐free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase‐selective syntheses of novel hierarchical CoTe₂ and CoTe nanofleeces for efficient OER catalysts. The CoTe₂ nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe₂ catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state‐of‐the‐art RuO₂ catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe₂ and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble‐metal‐free OER catalysts with high performance and low cost by use of Co‐based chalcogenides.