Synthesis of monodisperse spherical nanocrystals

Much progress has been made over the past ten years on the synthesis of monodisperse spherical nanocrystals. Mechanistic studies have shown that monodisperse nanocrystals are produced when the burst of nucleation that enables separation of the nucleation and growth processes is combined with the subsequent diffusion-controlled growth process through which the crystal size is determined. Several chemical methods have been used to synthesize uniform nanocrystals of metals, metal oxides, and metal chalcogenides. Monodisperse nanocrystals of CdSe, Co, and other materials have been generated in surfactant solution by nucleation induced at high temperature, and subsequent aging and size selection. Monodisperse nanocrystals of many metals and metal oxides, including magnetic ferrites, have been synthesized directly by thermal decomposition of metal-surfactant complexes prepared from the metal precursors and surfactants. Nonhydrolytic sol-gel reactions have been used to synthesize various transition-metal-oxide nanocrystals. Monodisperse gold nanocrystals have been obtained from polydisperse samples by digestive-ripening processes. Uniform-sized nanocrystals of gold, silver, platinum, and palladium have been synthesized by polyol processes in which metal salts are reduced by alcohols in the presence of appropriate surfactants.     

单分散铁氧体纳米颗粒的生长机制与成分偏聚的透射电子显微研究

理解纳米晶的生长机制对单分散纳米晶的可控合成至关重要。本文以热分解法制备的双金属铁氧体(钴铁氧和锰铁氧)纳米颗粒为例,利用透射电子显微镜(TEM)系统研究了铁氧体纳米晶的生长机制,揭示了由此造成的成分偏聚现象。对不同时间阶段的反应产物的分析结果表明,两步加热法(即先后在相对低的温度和相对高的温度下加热反应)是制备高质量的单分散铁氧体纳米晶的关键;通过控制低温反应阶段的时间可实现纳米晶的形核阶段和生长阶段的有效分离,从而有利于单分散纳米晶的合成。利用扫描透射电子显微镜(STEM)及电子能量损失谱(EELS)谱学成像技术分析,我们进一步发现了双金属铁氧体纳米晶中的成分偏聚现象,表明双金属铁氧体纳米晶在形核阶段主要形成富Fe的核芯,而在生长阶段则形成更富Co/Mn的双金属铁氧体壳层。这些结果对制备高质量的单分散铁氧体纳米晶具有重要的指导意义,同时也有助于正确理解热分解法制备的铁氧体纳米晶的表面成分和相关表面物理化学性质。     

Facile Synthesis of Platinum Right Bipyramids by Separating and Controlling the Nucleation Step in a Continuous Flow System

Colloidal synthesis of metal nanocrystals with controlled shapes and internal structures calls for a tight control over both the nucleation and growth processes. Here we report a method for the facile synthesis of Pt right bipyramids (RBPs) by separating nucleation from growth and controlling the nucleation step in a continuous flow reactor. Specifically, homogeneous nucleation was thermally triggered by introducing the reaction solution into a tubular flow reactor held at an elevated temperature to generate singly-twinned seeds. At a lower temperature, the singly-twinned seeds were protected from oxidative etching to allow their slow growth and evolution into RBPs while additional nucleation of undesired seeds could be largely suppressed to ensure RBPs as the main product. Further investigation indicated that the internal structure and growth pattern of the seeds were determined by the temperatures used for the nucleation and growth steps, respectively. The Br⁻ ions involved in the synthesis also played a critical role in the generation of RBPs by serving as a capping agent for the Pt{100} facets while regulating the reduction kinetics through coordination with the Pt(IV) ions.     

Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?

Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape‐controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution‐phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape‐controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.     

Metal Ions Induce Growth and Magnetism Alternation of α‐Fe2O3 Crystals Bound by High‐Index Facets

In this study, quasi‐cubic and hexagonal bipyramid α‐Fe₂O₃ polyhedrons with high‐index facets exposed were controllably synthesized by applying metal ions Zn²⁺ or Cu²⁺ as structure‐directing agents. The growth of the α‐Fe₂O₃ nanostructures with high‐index facets were induced by metal ions without the addition of any other surfactants. The quasi‐cubic form controlled by Zn²⁺ looks like a cube but has an angle of approximately 86° bound by (012), (10‐2), and (1‐12) facets, whereas the hexagonal bipyramid form controlled by Cu²⁺ has a sixfold axis bound by {012} facets. Magnetic measurements confirm that these two kinds of nanocrystals display shape‐ and surface‐dependent magnetic behaviors. The hexagonal bipyramid iron oxide nanocrystals show a lower Morin transition temperature of 240 K and might be spin‐canted ferromagnetically controlled at room temperature, and the ferromagnetism disappears at low temperature. The quasi‐cubic nanocrystals have a splitting between FC curve and ZFC curve from the highest experimental temperature and no Morin transformation occurs; this indicates that they would be defect ferromagnetically controlled at low temperature. The reported metal‐ion‐directing technique could provide a universal method for shape‐ and surface‐controlled synthesis of nanocrystals with high‐index facets exposed.     

Seed-mediated growth method for high-quality noble metal nanocrystals

This review highlights work from the authors’ laboratory on the recent development of seed-mediated growth method for noble metal nanocrystals. The seed-mediated growth method has become one of the most efficient and versatile methods for synthe-sizing high-quality noble metal nanocrystals. The seed-mediated growth method can separate the nucleation and growth stages of metal nanocrystals, and thus provide better control over the size, size distribution, and crystallographic evolution of metal nanocrystals. Because of its high controllability, the seed-mediated growth method is especially promising in providing mechanistic insights into the growth mechanisms of noble metal nanocrystals. In this review, the thermodynamic and kinetic parameters for the nucleation and growth of noble metal nanocrystals are systematically summarized. Mechanistic understanding of these parameters is provided. These studies provide useful guidelines for the rational design and synthesis of novel noble metal nanocrystals with high quality.     

Elucidation of Metal‐Ion Accumulation Induced by Hydrogen Bonds on Protein Surfaces by Using Porous Lysozyme Crystals Containing RhIII Ions as the Model Surfaces

Metal‐ion accumulation on protein surfaces is a crucial step in the initiation of small‐metal clusters and the formation of inorganic materials in nature. This event is expected to control the nucleation, growth, and position of the materials. There remain many unknowns, as to how proteins affect the initial process at the atomic level, although multistep assembly processes of the materials formation by both native and model systems have been clarified at the macroscopic level. Herein the cooperative effects of amino acids and hydrogen bonds promoting metal accumulation reactions are clarified by using porous hen egg white lysozyme (HEWL) crystals containing Rh^III ions, as model protein surfaces for the reactions. The experimental results reveal noteworthy implications for initiation of metal accumulation, which involve highly cooperative dynamics of amino acids and hydrogen bonds: i) Disruption of hydrogen bonds can induce conformational changes of amino‐acid residues to capture Rh^III ions. ii) Water molecules pre‐organized by hydrogen bonds can stabilize Rh^III coordination as aqua ligands. iii) Water molecules participating in hydrogen bonds with amino‐acid residues can be replaced by Rh^III ions to form polynuclear structures with the residues. iv) Rh^III aqua complexes are retained on amino‐acid residues through stabilizing hydrogen bonds even at low pH (≈2). These metal–protein interactions including hydrogen bonds may promote native metal accumulation reactions and also may be useful in the preparation of new inorganic materials that incorporate proteins.     

Photochromism and Metal Complexation of a Macrocyclic Styryl Naphthopyran

A macrocyclic benzo‐15‐crown‐5 ether unit tethered to a photochromic naphthopyran by a styryl spacer ( MEN ) is shown to form a 1:1 complex with magnesium(II). The structure and dynamics of the specific host–metal interactions were investigated by PFG‐NMR analysis. A combination of UV/Vis and variable temperature multi‐dimensional ¹H NMR photokinetic analysis of the crown‐containing styryl naphthopyran and its metal complex was used to probe the effect of metal complexation on the photochromism.     

Effect of temperature on the size of biosynthesized silver nanoparticle: Deep insight into microscopic kinetics analysis

Lacking of microscopic insight into quantitative nucleation and growth kinetics analysis, the effect of temperature on particle size in wet chemical synthesis of metal nanoparticles is still not fully understood. Firstly, we investigated the influence of temperature on the nucleation kinetics constant k₁ and growth kinetics constant k₂. Based on the microscopic quantitative kinetics analysis, the influence of temperature on size of nanoparticles was discussed and concluded in detail. In order to test and verify the conclusions, synthesis of AgNPs under sufficient and insufficient Ag⁺ precursors respectively was carried out. Temperature exhibits different effect on the size of nanoparticles under sufficient and insufficient Ag⁺ precursors due to its impressively different influence on the nucleation kinetics constant k₁ and growth kinetics constant k₂. It is the first time to discuss the effect of temperature on size of nanoparticles in detail based on the microscopic quantitative kinetics analysis. Our work provides useful deep insight into microscopic kinetics analysis of the effect of temperature on size distribution of AgNPs.     

Temperature‐Dependent Nucleation and Growth of Dendrite‐Free Lithium Metal Anodes

It is essential to develop a facile and effective method to enhance the electrochemical performance of lithium metal anodes for building high‐energy‐density Li‐metal based batteries. Herein, we explored the temperature‐dependent Li nucleation and growth behavior and constructed a dendrite‐free Li metal anode by elevating temperature from room temperature (20 °C) to 60 °C. A series of ex situ and in situ microscopy investigations demonstrate that increasing Li deposition temperature results in large nuclei size, low nucleation density, and compact growth of Li metal. We reveal that the enhanced lithiophilicity and the increased Li‐ion diffusion coefficient in aprotic electrolytes at high temperature are essential factors contributing to the dendrite‐free Li growth behavior. As anodes in both half cells and full cells, the compact deposited Li with minimized specific surface area delivered high Coulombic efficiencies and long cycling stability at 60 °C.     

Normalized Lithium Growth from the Nucleation Stage for Dendrite‐Free Lithium Metal Anodes

Inducing uniform deposition of lithium from the stage of metal crystallization nucleation is of vital importance to achieve dendrite‐free lithium anodes. Herein, using experiments and simulation, homogenization of Li nucleation and normalization of Li growth can be achieved on PNIPAM polymer brushes with lithiophilic functional groups modified Cu substrates. The lithiophilic functional groups of amide O can homogenize ion mass transfer and induce the uniform distribution of Li nucleation sites. What is more, the ultra‐small space between each brush can act as the channels for Li transportation and normalization growth. Owing to the synergistic effect of homogenization and normalization of electrodeposited Li, the obtained planar columnar Li anode exhibits excellent cycle stability at an ultra‐high current density of 20 mA cm^?2.     

Study of nucleation and growth in the organometallic synthesis of magnetic alloy nanocrystals: the role of nucleation rate in size control of CoPt3 nanocrystals

High quality CoPt(3) nanocrystals were synthesized via simultaneous reduction of platinum acetylacetonate and thermodecomposition of cobalt carbonyl in the presence of 1-adamantanecarboxylic acid and hexadecylamine as stabilizing agents. The high flexibility and reproducibility of the synthesis allows us to consider CoPt(3) nanocrystals as a model system for the hot organometallic synthesis of metal nanoparticles. Different experimental conditions (reaction temperature, concentration of stabilizing agents, ratio between cobalt and platinum precursors, etc.) have been investigated to reveal the processes governing the formation of the metal alloy nanocrystals. It was found that CoPt(3) nanocrystals nucleate and grow up to their final size at an early stage of the synthesis with no Ostwald ripening observed upon further heating. In this case, the nanocrystal size can be controlled only via proper balance between the rates for nucleation and for growth from the molecular precursors. Thus, the size of CoPt(3) nanocrystals can be precisely tuned from approximately 3 nm up to approximately 18 nm in a predictable and reproducible way. The mechanism of homogeneous nucleation, evolution of the nanocrystal ensemble in the absence of Ostwald ripening, nanocrystal faceting, and size-dependent magnetic properties are investigated and discussed on the example of CoPt(3) magnetic alloy nanocrystals. The developed approach was found to be applicable to other systems, e.g., FePt and CoPd(2) magnetic alloy nanocrystals.     

Synthesis of nanocrystals via microreaction with temperature gradient: towards separation of nucleation and growth

By utilizing the symmetrical temperature distribution in a tube furnace chamber, a capillary microreactor was designed with the microchannel passing two well-controlled, stable temperatures in steep temperature gradients. The two-temperature microreator, first developed and implemented by this research team, provides an opportunity to separate the nucleation and growth of semiconductor nanocrystals, leading to better control of nucleation and growth kinetics. For the synthesis of CdSe nanocrystals as a model system, we demonstrated the improved size uniformity achieved by the two-temperature approach, confirming the success of the use of high temperature to burst nucleation and low temperature to promote growth.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Gas-bubble effects on the formation of colloidal iron oxide nanocrystals

This paper reports that gas bubbles can be used to tailor the kinetics of the nucleation and growth of inorganic-nanocrystals in a colloidal synthesis. We conducted a mechanistic study of the synthesis of colloidal iron oxide nanocrystals using gas bubbles generated by boiling solvents or artificial Ar bubbling. We identified that bubbling effects take place through absorbing local latent heat released from the exothermic reactions involved in the nucleation and growth of iron oxide nanocrystals. Our results show that gas bubbles display a stronger effect on the nucleation of iron oxide nanocrystals than on their growth. These results indicate that the nucleation and growth of iron oxide nanocrystals may rely on different types of chemical reactions between the iron-oleate decomposition products: the nucleation relies on the strongly exothermic, multiple-bond formation reactions, whereas the growth of iron oxide nanocrystals may primarily depend upon single-bond formation reactions. The identification of exothermic reactions is further consistent with our results in the synthesis of iron oxide nanocrystals with boiling solvents at reaction temperatures ranging from 290 to 365 °C, by which we determined the reaction enthalpy in the nucleation of iron oxide nanocrystals to be -142 ± 12 kJ/mol. Moreover, our results suggest that a prerequisite for effectively suppressing secondary nucleation in a colloidal synthesis is that the primary nucleation must produce a critical amount of nuclei, and this finding is important for a priori design of colloidal synthesis of monodispersed nanocrystals in general.     

Electrochemical Study of Indium in a Water‐Stable 1‐Ethyl‐3‐Methylimidazolium Chloride/Tetrafluoroborate Room Temperature Ionic Liquid

The electrochemistry of indium species was investigated at glassy carbon, tungsten and nickel electrodes in a basic 1‐ethyl‐3‐methylimidazolium chloride/tetrafluoroborate ionic liquid. Amperometric titration experiments suggest that In(III) chloride is complexed as [InCl₅]^2? in this ionic liquid. The electrochemical reduction of [InCl₅]^2? to indium metal is preceded by overpotential driven nucleations. The effective anodic dissolution of indium to indium(III) requires, however, the presence of sufficient chloride ions at the electrode surface. The electrodeposition of indium at glassy carbon and tungsten electrodes proceeds via three‐dimensional instantaneous nucleation with diffusion‐controlled growth of the nuclei. At the nickel electrode, the deposition proceeds via three‐dimensional progressive nucleation with diffusion‐controlled growth of the nuclei. Raising the deposition temperature decreases the average radius of the individual nuclei, r. Scanning electron microscopic and x‐ray diffraction data indicated that bulk crystalline indium electrodeposits could be prepared on nickel substrates within a temperature range between 30 and 120 °C.     

Microwave Synthesis of SAPO‐11 and AlPO‐11: Aspects of Reactor Engineering

AlPO‐11 and SAPO‐11 are synthesized using microwave heating. The effects of precursor volume, reaction temperature, reactor geometry, stirring, applicator type and frequency on the microwave synthesis of SAPO‐11 and AlPO‐11 are studied. The nucleation time and crystallization rate are determined from crystallization curves for SAPO‐11 (and/or AlPO‐11), for the various parameters investigated. Increasing volume of the reacting material decreases the reaction rate of SAPO‐11 at 160°C. In particular, the nucleation time increases with increase in the reaction volume. Increasing the reaction temperature increases the crystallization rate and decreases the nucleation time, however it decreases the particle size. Nucleation of SAPO‐11 and AlPO‐11 under microwave heating is strongly dependant on the reaction temperature. Using wider geometry vessel (33 mm compared to 11 mm diameter) enhances the reaction rate, producing larger crystals in the same reaction time, even though the crystallization rate is decreased. The crystallization rate is enhanced by applicator type in the following order CEM MARS‐5 oven>CEM Discover “focused” system>monomode waveguide. Stirring the reacting solution during heating affects primarily the nucleation time. The effect of microwave frequency on the nucleation and growth of SAPO‐11 shows a dependence on the applicator type more than the specific frequency, for the frequency range 2.45–10.5 GHz. The difference between the crystallization rate observed at higher frequencies and that at 2.45 GHz maybe due to the multimode nature of the waveguide at frequencies above 2.45 GHz. Sweeping the microwave frequency linearly between 8.7 and 10.5 GHz at rates of 10 min^?1 and 100 min^?1 shows an intermediate crystallization curve to that for fixed frequencies of 2.45 GHz and that for 5.8, 8.7 and 10.5 GHz.     

Aqueous‐Phase Synthesis of Single‐Crystal Pd Seeds 3 nm in Diameter and Their Use for the Growth of Pd Nanocrystals with Different Shapes

This article describes an aqueous method for the synthesis of Pd seeds with a single‐crystal structure and a uniform diameter of 3 nm and their use for the growth of Pd nanocrystals with a variety of shapes. We have also investigated the effects of a number of parameters, including the temperature, reducing power of the reductant, and capping agent on the reduction rate of a Pd precursor, and thus the final size, size distribution, and morphology of the Pd seeds. By taking advantage of the coordination effect of Br^? ions with Pd²⁺ ions and their selective adsorption on the Pd(100) surface, Pd nanocrystals with a number of distinct shapes could be conveniently produced by varying the concentration of KBr added into the growth solution. This work provides a general and facile method for the green synthesis of Pd nanocrystals with controlled shapes, especially for the preparation of Pd nanocrystals with sizes in the sub‐10 nm regime.     

Shape,Size, and Phase‐Controlled Rare‐Earth Fluoride Nanocrystals with Optical Up‐Conversion Properties

High‐quality rare‐earth fluorides, α‐NaMF₄ (M=Dy, Ho, Er, Tm, Y, Yb, and Lu) nanocrystals and β‐NaMF₄ (M=Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Y, Yb, and Lu) nanoarrays, have been synthesized by using oleic acid as a stabilizing agent through a facile hydrothermal method at 130–230 °C. The phase, shape, and size of the products are varied by careful control of synthetic conditions, including hydrothermal temperature and time, and the amounts of reactants and solvents. Tuning the hydrothermal temperature, time, and the amount of NaOH can cause the transformation from the cubic α‐NaMF₄ to hexagonal phase β‐NaMF₄. Upon adjustment of the amount of NaOH, NaF, M³⁺, and ethanol, the morphologies for the β‐NaMF₄ nanoarrays can range from tube, rod, wire, and zigzagged rod, to flower‐patterned disk. Simultaneously, the size of the rare‐earth fluoride crystals is variable from 5 nm to several micrometers. A combination of “diffusion‐controlled growth” and the “organic–inorganic interface effect” is proposed to understand the formation of the nanocrystals. An ideal “1D growth” of rare‐earth fluorides is preferred at high temperatures and high ethanol contents, from which the tube‐ and rodlike nanoarrays with high aspect ratio are obtained. In contrast, the disklike β‐NaMF₄ nanoarrays with low aspect ratios are produced by decreasing the ethanol content or prolonging the reaction time, an effect probably caused by “1D/2D ripening”. Multicolor up‐conversion fluorescence is also successfully realized in the Yb³⁺/Er³⁺ (green, red) and Yb³⁺/Tm³⁺ (blue) co‐doped α‐NaYF₄ nanocrystals and β‐NaYF₄ nanoarrays by excitation in the NIR region (980 nm).     

Templated Growth of InP Nanocrystals with a Polytwistane Structure

We have synthesized InP nanocrystals of an unprecedented crystal phase at low temperature (35–100 °C) by templated growth of InP magic‐sized clusters. With the addition of stoichiometric equivalents of P(SiMe₃)₃ to the starting cluster, we demonstrate nanocrystal growth mediated through a partial dissolution and recrystallization pathway. This growth process was monitored using a combination of in situ UV/Vis and ³¹P NMR spectroscopy, revealing the intermediacy of smaller cluster species of higher symmetry. The nanocrystals that result from this templated growth exhibit a crystal structure that is neither zincblende nor wurtzite, and instead is derived from the original cluster. This structure is best described as a 3D polytwistane phase as deduced from a combination of X‐ray diffraction, Raman, and solid‐state NMR spectroscopy methods.