Analysis of bioactive components and multi‐component pharmacokinetics of saponins from the leaves of Panax notoginseng in rat plasma after oral administration by LC–MS/MS

In this study, simple ultra‐high performance liquid chromatography coupled with quadrupole time‐of‐flight mass tandem mass spectrometry is used to characterize the absorbed components in rat plasma after the oral administration of saponins from the leaves of Panax notoginseng. Seventeen prototype compounds are structurally characterized. Furthermore, a simple and sensitive liquid chromatography with tandem mass spectrometry method is also used for the simultaneous determination of notoginsenoside Fc, ginsenoside Rb1, ginsenoside Rc, ginsenoside Rb3, ginsenoside Rd, and notoginsenoside Fe in rat plasma within 5 min. After n‐butanol mediated liquid–liquid extraction, all analytes were separated on a C₁₈ column and monitored in negative ion mode. Linearity, sensitivity, intra‐ and inter‐assay precision, accuracy, recovery, matrix effect, and stability were all within acceptable ranges. The validated liquid chromatography with tandem mass spectrometry method is successfully applied to the pharmacokinetic study of saponins from the leaves of Panax notoginseng in rats after oral administration. The results suggest that notoginsenoside Fc and ginsenoside Rb3 showed relatively higher exposure compared with other saponins. All saponins showed a long duration in plasma with a t_1/2 longer than 15 h, except notoginsenoside Fe (t_1/2 = 2.78 h). This study provides important information about the metabolism of saponins from the leaves of Panax notoginseng, which is useful for completely understanding its mechanism of action.     

Simple and sensitive determination of malondialdehyde in human urine and saliva using UHPLC–MS/MS after derivatization with 3,4‐diaminobenzophenone

Malondialdehyde has been used as a biomarker for lipid peroxidation in biological samples. An ultra‐high performance liquid chromatography with tandem mass spectrometry method was developed to determine the levels of malondialdehyde in human urine and saliva samples. To select the optimum derivatization reagent from four diamino compounds, the reactivity and sensitivity of their derivatives were compared, and 3,4‐diaminobenzophenone was selected. The optimum reaction conditions for malondialdehyde with 3,4‐diaminobenzophenone were as follows: a reagent dosage of 50 mg/L, pH of 4, and reaction for 30 min at 50°C. The formed derivative product was analyzed using ultra‐high performance liquid chromatography with tandem mass spectrometry without additional extraction or concentration steps. In the optimal conditions, the method was used to determine malondialdehyde concentration in human urine and saliva samples. The limits of quantification for malondialdehyde in biological samples were over a concentration range of 0.1–0.3 μg/L. Additionally, the calibration curve showed a linearity greater than r ² = 0.997. The method was used to analyze 14 human urine and saliva samples from healthy volunteers. Malondialdehyde was detected in the concentration range of 1.7–33.6 μg/g creatinine in all human urine samples and 0.1–1.3 μg/L in all human saliva samples.     

Identification and quantitative investigation of the effects of intestinal microflora on the metabolism and pharmacokinetics of notoginsenoside Fc assayed by liquid chromatography with electrospray ionization tandem mass spectrometry

Notoginsenoside Fc, which is a protopanaxdiol‐type saponin isolated from the leaves of Panax notoginseng, exhibits an exceptional antiplatelet aggregatory effect. To study the modulating effect of gastrointestinal contents on the metabolic profile and pharmacokinetics, pseudo germ‐free rats were used to study the influence of the bacterial community structure on the metabolic profile. Glycosidase activities were measured using the spectrophotometric method. Biotransformations of notoginsenoside Fc in normal and pseudo germ‐free rat intestinal microflora were systematically investigated using ultra high performance liquid chromatography with tandem quadrupole/time‐of‐flight mass spectrometry. Moreover, a liquid chromatography with tandem mass spectrometry method was established for simultaneous determination of the notoginsenoside Fc prototype and its degradation products. Through an in vivo pharmacokinetic study, the pharmacokinetic characteristics were compared between normal rats and pseudo germ‐free rats. During the in vitro biotransformation, seven deglycosylated products were detected and identified after incubation in the intestinal bacteria of normal rats. In pseudo germ‐free rats, glycosidase activities were significantly decreased, and no obvious degradation occurred. In an in vivo study, the systemic exposure was significantly increased 40%, as evidenced by the area under the blood concentration–time curve from time zero to infinity value and half‐life value, which were prolonged more in the pseudo germ‐free group than in normal rats. The results demonstrate that patients who use intestinal bacteria‐metabolized herbs, such as panax notoginseng, should understand the profile of intestinal bacteria to ensure therapeutic efficacy.     

A rapid,sensitive, and widely applicable method for quantitative analysis of underivatized amino acids in different biological matrices by UHPLC‐MS/MS

A rapid, sensitive, and widely applicable method for the simultaneous quantitative analysis of 20 underivatized amino acids in different biological matrices, including serum, plasma, and tissue homogenates, using ultra high performance liquid chromatography with tandem mass spectrometry was developed and validated. Only 4 µL of serum, plasma, or tissue homogenate was extracted with 996 µL of solution (1.7 mM ammonium formate in 85% acetonitrile containing 0.1% formic acid) containing 100 ng/mL phenylalanine‐d5 as an internal standard without any further derivatization step. In addition, the matrix effects were small because a large volume of extraction solution was used. The total run time including reequilibration was 13 min. The results of linearity, accuracy, repeatability, precision, limits of detection, limits of quantification, and sample stability were sufficient to allow the measurement of the amino acids in different biological matrices. We conclude that our method is rapid, sensitive, and widely applicable and represents an improvement over other currently available technologies.     

Simultaneous analysis by Quadrupole‐Orbitrap mass spectrometry and UHPLC‐MS/MS for the determination of sedative‐hypnotics and sleep inducers in adulterated products

Adulterated products are continuously detected in society and cause problems. In this study, we developed and validated a method for determining synthetic sedative‐hypnotics and sleep inducers, including barbital, benzodiazepam, zolpidem, and first‐generation antihistamines, in adulterated products using Quadrupole‐Orbitrap mass spectrometry and ultrahigh performance liquid chromatography with tandem mass spectrometry. In Quadrupole‐Orbitrap mass spectrometry analysis, target compounds were confirmed using a combination of retention time, mass tolerance, mass accuracy, and fragment ions. For quantification, several validation parameters were employed using ultrahigh performance liquid chromatography with tandem mass spectrometry. The limit of detection and limit of quantitation was 0.05–53 and 0.17–177 ng/mL, respectively. The correlation coefficient for linearity was more than 0.995. The intra‐ and interassay accuracies were 86–110 and 84–111%, respectively. Their precision values were evaluated as within 4.0 (intraday) and 10.7% (interday). Mean recoveries of target compounds in adulterated products ranged from 85 to 116%. The relative standard deviation of stability was less than 10.7% at 4°C for 48 h. The 144 adulterated products obtained over 3 years (2014–2016) from online and in‐person vendors were tested using established methods. After rapidly screening with Quadrupole‐Orbitrap mass spectrometry, the detected samples were quantified using ultrahigh performance liquid chromatography with tandem mass spectrometry. Two of them were adulterated with phenobarbital.     

Development and validation of an analytical method for multiresidue determination of pesticides in lettuce using QuEChERS–UHPLC–MS/MS

A new analytical method for multiresidue determination of 16 multiclass pesticides in lettuce was developed using ultra‐high performance liquid chromatography with tandem mass spectrometry with a triple quadrupole mass analyzer and positive mode electrospray ionization, using a previously optimized quick, easy, cheap, effective, rugged, and safe method for sample preparation. Validation studies, according to document SANTE/11945/2015, demonstrated that the developed method is selective, accurate, and precise, providing recoveries of 70–120%, relative standard deviations ≤20% and quantification limits from 3 μg/kg. The method was compared with one based on high‐performance liquid chromatography with tandem mass spectrometry, in terms of chromatographic performance, detectability and matrix effect for five varieties of lettuce. The new method provided a reduction in the time for the chromatographic analysis of 50%, from 30 to 15 min, using a lower mobile phase flow rate (0.147 mL/min), which reduced the consumption of mobile phase by 25%, and injection of smaller amounts of sample (1.7 μL). Lower limits of quantification were obtained for almost all pesticides studied for green‐leaf lettuce. However, in relation to the matrix effect, four of the five types of lettuce studied presented higher matrix effects.     

Syringe cleanup with UHPLC–MS/MS for nitroimidazoles and steroids detection in manure‐based fertilizers

A syringe‐dispersive solid‐phase extraction method was developed for the determination of seven nitroimidazoles and nine steroids in manure‐based fertilizers by ultra‐high performance liquid chromatography with tandem mass spectrometry. Methanol and acetonitrile were used to extract the sample, and mixed dispersive sorbents dispersed in the syringe were used for purification. The extract was separated with an HSS‐T3 column and detected in positive or negative multiple reaction monitoring mode. Under the optimal conditions, the recoveries of the 16 compounds ranged from 70.3 to 112.3% at the four spiked levels (3, 10, 20, and 50 μg/kg) and the relative standard deviations ranged from 1.0 to 12.4%. The limits of detection and quantification were 0.22–0.86 and 0.73–2.87 μg/kg, respectively. This method is simple, fast, and reliable, and can be used to simultaneously screen and determine nitroimidazoles and steroids in manure‐based fertilizers.     

Rapid determination of hexavalent chromium in textiles by a novel ammonium pyrrolidine dithiocarbamate derivatization combined with UHPLC–MS/MS

Hexavalent chromium is mainly determined by traditional spectrophotometry, atomic absorption spectrometry, and ion chromatography methods. In the present work, a reliable ultra high performance liquid chromatography with tandem mass spectrometry method was firstly developed for the determination of hexavalent chromium in textiles. The sample was extracted by acetic acid/sodium acetate buffer solution and followed by derivatization with ammonium pyrrolidine dithiocarbamate. The resulting derivative product was extracted by ethyl acetate, separated on a C18 column, and detected through electrospray ionization source in the positive mode with multiple reaction monitoring conditions. The derivatization reaction conditions were investigated and optimized. The developed method was validated in terms of the sensitivity, linearity range, matrix effects, recovery, accuracy, intra‐ and interday precision. Results showed that the calibration curves of pure solvent and matrix were linear over the selected concentration ranges of 0.1–20.0 μg/L. The achieved instrument and method limit of quantification were 0.1 and 40.0 μg/kg, respectively. Recoveries were calculated at three spiked concentrations and the values were between 92.2 and 103% with relative standard deviation values of 2.7–4.9% for intra‐day precision and 6.1% for inter‐day precision. Successful analysis of hexavalent chromium in practical textiles indicated that there was hexavalent chromium contamination in textiles.     

Characterization of forced degradation products of pazopanib hydrochloride by UHPLC‐Q‐TOF/MS and in silico toxicity prediction

Pazopanib (PZ), an anti‐cancer drug, was subjected to forced degradation under hydrolytic (acid, base and neutral), oxidative, photolytic and thermal stress conditions as per International Conference on Harmonization guidelines. A selective stability indicating validated method was developed using a Waters Acquity UPLC HSS T3 (100 × 2.1 mm, 1.7 µm) column in gradient mode with ammonium acetate buffer (10 m m , pH 5.0) and acetonitrile. PZ was found to degrade only in photolytic conditions to produce six transformation products (TPs). All the TPs were identified and characterized by liquid chromatography/atmospheric pressure chemical ionization–quadrupole‐time of flight mass spectrometry experiments in combination with accurate mass measurements. Plausible mechanisms have been proposed for the formation of TPs. In silico toxicity was predicted using TOPKAT and DEREK softwares for all the TPs. The TP, N4‐(2,3‐dimethyl‐2H‐indazol‐6‐yl)‐N4‐methylpyrimidine‐2,4‐diamine, was found to be genotoxic, whereas all other TPs with sulfonamide moiety were hepatotoxic. The data reported here are expected to be of significance as this study foresees the formation of one potential genotoxic and five hepatotoxic degradation/transformation products. Copyright © 2015 John Wiley & Sons, Ltd.     

Separation and determination of polyurethane amine catalysts in polyether polyols by using UHPLC–Q‐TOF‐MS on a reversed‐phase/cation‐exchange mixed‐mode column

A simple, selective, and accurate ultra‐high performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry method was established and validated for the efficient separation and quantification of polyurethane amine catalysts in polyether polyols. Amine catalysts were primarily separated in polyether polyol‐based sample by solid‐phase extraction, and further baseline separated on a reversed‐phase/cation‐exchange mixed‐mode column (SiELC Primesep™ 200) using 0.1% trifluoroacetic acid/acetonitrile as a mobile phase in gradient elution mode at a flow rate of 0.2 mL/min. High‐resolution quadrupole time‐of‐flight mass spectrometry analysis in electrospray ionization positive mode allowed the identification as N,N′‐bis[3‐(dimethylamino)propyl]urea, N‐[2‐(2‐dimethylaminoethoxy)ethyl]‐N‐methyl‐1,3‐propanediamine, and N,N,N′,N′‐tetramethyldipropylenetriamine. The method was validated and presented good linearity for all the analytes in blank matrices within the concentration range of 0.20–5.0 or 0.1–2.0 μg/mL with the correlation coefficients (R²) ranging from 0.986 to 0.997. Method recovery ranged within 81–105% at all three levels (80, 100, and 120% of the original amount) with relative standard deviations of 1.0–6.2%. The limits of detection were in the range of 0.007–0.051 μg/mL. Good precision was obtained with relative standard deviation below 3.2 and 0.72% for peak area and retention time of three amines, respectively.     

Photocatalytic degradation of norfloxacin and its intermediate degradation products using nitrogen‐doped activated carbon–CuS nanocomposite assisted by visible irradiation

We have synthesized a nitrogen‐doped activated carbon (NAC) derived from oak using KOH and N₂ thermal treatment at 400 °C as well as CuS nanoparticles. The NAC was decorated with the synthesized CuS to apply as a photocatalyst for degradation of norfloxacin (NOR). Before its application for photodegradation, the adsorbent/photocatalyst structural properties were investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. The photocatalytic degradation of NOR was successfully done under visible light using NAC–CuS. The results revealed that the investigated fluoroquinolone degraded very efficiently and pseudo‐first‐order kinetics was adopted for the photodegradation process. In addition, isothermal studies showed that the adsorption process in darkness followed the Langmuir model. The degradation characteristics of the NAC–CuS photocatalyst were studied for 120 min and 15 h under visible light for degradation of NOR, exhibiting a good efficiency for NOR removal. During 120 min of degradation, some intermediate degradation products that can be considered as secondary pollutants were produced. Then, to degrade these pollutants the radiation time was increased up to 15 h. The results displayed a perfect degradation of NOR and its secondary pollutants. The effective variables including pH, degradation time and photocatalyst dosage were optimized and studied in a multivariate method using Design Expert 7. Determination of photodegradation products was carried out using liquid chromatography–mass spectrometry. The results are of significance for estimating the environmental fate of NOR in aqueous media.     

Determination of synephrine in feeds by a novel quick,easy, cheap,effective, rugged,and safe solid‐phase extraction method combined with UHPLC–MS/MS

To detect and quantify synephrine in feed, an effective analytical method based on quick, easy, cheap, effective, rugged, and safe solid‐phase extraction coupled to ultra high performance liquid chromatography with tandem mass spectrometry was developed with isotopic internal standards. Pretreatment was performed using quick, easy, cheap, effective, rugged, and safe solid‐phase extraction with primary secondary amine and C18 sorbent as sorbents in combination with Oasis MCX column clean‐up to extract and purify feed samples. Tandem mass spectrometry detection in positive ion mode was conducted in positive multiple reaction monitoring mode in addition to the quantitative internal standard method. Two transitions of synephrine at m/z 168.1/150.0 and 168.1/135.0 were selected, and m/z 168.1/135.0 was determined as the quantification ion pair. D₉‐Terbutaline was selected as an internal standard, for which m/z 235.1/153.0 was selected as the quantification ion pair. Good linearity was shown for synephrine in the range of 0.5–50 μg/L, and the correlation coefficient exceeded 0.999. The recoveries in three different feed samples at three spiked levels were 81.42–112.08%, and the relative standard deviations were not greater than 14.66%. The method proposed in this study was reliable and highly effective, and its sensitivity, accuracy, and precision are suitable for determining synephrine residues in feed samples.     

Rapid and sensitive determination of phytosterols in functional foods and medicinal herbs by using UHPLC–MS/MS with microwave‐assisted derivatization combined with dual ultrasound‐assisted dispersive liquid–liquid microextraction

In this work, a hyphenated technique of dual ultrasound‐assisted dispersive liquid–liquid microextraction combined with microwave‐assisted derivatization followed by ultra high performance liquid chromatography tandem mass spectrometry has been developed for the determination of phytosterols in functional foods and medicinal herbs. Multiple reaction monitoring mode was used for the tandem mass spectrometry detection. A mass spectrometry sensitive reagent, 4′‐carboxy‐substituted rosamine, has been used as the derivatization reagent for five phytosterols, and internal standard diosgenin was used for the first time. Parameters for the dual microextraction, microwave‐assisted derivatization, and ultra high performance liquid chromatography tandem mass spectrometry were all optimized in detail. Satisfactory linearity, recovery, repeatability, accuracy and precision, absence of matrix effect, extremely low limits of detection (0.005–0.015 ng/mL) and limits of quantification (0.030–0.10 ng/mL) were achieved. The proposed method was compared with previously reported methods. It showed better sensitivity, selectivity, and accuracy. The matrix effect was also significantly reduced. The proposed method was successfully applied to the determination of five phytosterols in vegetable oil (sunflower oil, olive oil, corn oil, peanut oil), milk and orange juice (soymilk, peanut milk, orange juice), and medicinal herbs (Ginseng, Ganoderma lucidum, Cordyceps, Polygonum multiflorum) for the quality control of functional foods and medicinal herbs.     

Quantitation of acotiamide in rat plasma by UHPLC‐Q‐TOF‐MS: method development,validation and application to pharmacokinetics

A novel, sensitive and selective ultra‐high‐performance liquid chromatography–electrospray ionization mass spectrometry method was developed and validated for the quantification of acotiamide (ACT), a first‐in‐class drug used in functional dyspepsia, in rat plasma. A simple protein precipitation method with acetonitrile as precipitating solvent was used to extract ACT from rat plasma. ACT and an internal standard (mirabegron, IS) were separated on an Agilent poroshell EC C₁₈ column (50 × 3.0 mm, 2.7 µm) using methanol–10 mM ammonium acetate binary gradient mobile phase at a flow rate of 0.4 mL/min over 4 min run time. Detection was performed using target ions of [M + H]⁺ at m/z 451.2010 for ACT and m/z 397.1693 for IS in selective ion mode. The method was validated in the calibration range of 1.31–1000 ng/mL. All the validation parameters were well within the limits. The method demonstrated good performances in terms of intra‐ and inter‐day precision (3.27–12.60% CV) and accuracy (87.96–104.94%). Thus the present ultra‐high‐pressure liquid chromatograhy–high‐resolution mass spectrometry method for determination of ACT in rat plasma, is highly sensitive and rapid with a short run‐time of 4 min, can be suitable for high sample throughput and for large batches of biological samples in pharmacokinetic studies. This method can be extended to measure plasma concentrations of ACT in humans to understand drug metabolism, drug interaction and adverse effects. Copyright © 2015 John Wiley & Sons, Ltd.     

Metal organic frameworks enhanced dispersive solid phase microextraction of malathion before detection by UHPLC‐MS/MS

Metal organic frameworks are considered as an efficient and promised adsorbent for separation of several ions and compounds from solutions due to its unique geometric structure. Herein, copper‐benzyl tricarboxylic acid based metal organic frameworks have showed a high efficiency in enrichment and microextraction of malathion from food and water samples. The microextraction procedures were followed by determination of malathion by ultra high performance liquid chromatography with tandem mass spectrometry. The optimum recoveries for malathion were obtained at pH 6, and with using 2 mL of ethyl acetate as the eluent. The microextraction procedures showed a detection limits and the quantification limits of 4.0 and 10.0 µg/L, respectively. The intra‐ and interday precision showed a relative standard deviation% less than 10. The feasibility of the proposed procedure was determined by evaluating the addition/recovery studies of malathion from the real samples. The absolute recovery% was ≥92%. Furthermore, some ions were tested as cointerfering ions, and the recovery% was 93‐100%. These results confirm that the developed microextraction procedure based on copper‐benzyl tricarboxylic acid based metal organic frameworks as extractor for dispersive solid phase microextraction is matrix‐independent, and can be applied for various real samples including different matrix or various malathion content.     

Determination of personal care products in water using UHPLC–MS after solid phase extraction with mesoporous silica‐based MCM‐41 functionalized with cyanopropyl groups

A silica‐based MCM‐41 mesoporous material functionalized with cyanopropyl groups has been synthesized by cocondensation, characterized and applied to preconcentrate six parabens and three UV filters in river and swimming‐pool waters. The analytes were quantified by ultra‐high performance liquid chromatography‐tandem mass spectrometry, according to the Directive 96/23/EC. Even though matrix effect was negligible, quantification in river water samples with the standard addition approach improved the recoveries obtained using solvent‐based and even with matrix‐matched calibration. The method quantification limits in river water samples were 0.05 ng/mL for 2,4‐dihydroxybenzophenone and 0.01 ng/mL for the rest. Recoveries, evaluated for a concentration level of 0.5 ng/L, were in the range 93.5‐107.6% for parabens and in the range 64.2‐85.8% for UV filters, with relative standard deviations intraday ≤10.2 and 10.8%, respectively. This parameter, evaluated for a concentration level of 0.1 ng/L, ranged between 98.3 and 110.4% for parabens and between 61.9 and 89.9% for UV filters, with relative standard deviation intraday ≤15.3 and 15.5%, respectively. The two UV filters with lower recoveries were the most affected by the addition of sodium chloride. River and swimming pool waters were analyzed and all the personal care products were found in the swimming pool water, whereas only methylparaben was detected in the river water.     

Determination and dissipation of afidopyropen and its metabolite in wheat and soil using QuEChERS–UHPLC–MS/MS

The dissipations of afidopyropen and its metabolite in wheat plant and soil were determined using a quick, easy, cheap, effective, rugged, and safe method with ultra‐high performance liquid chromatography and tandem mass spectrometry under a field ecosystem. The limits of quantification were estimated for both target compounds as 0.001 mg/kg. The recoveries of afidopyropen and its metabolite ranged from 94 to 114% (soil), 90 to 109% (wheat seed) and 81 to 91% (wheat straw) at levels of 0.001, 0.01, 0.1, and 2.0 mg/kg with relative standard deviations ≤7%. The results of the residual dynamics experiments showed that afidopyropen dissipated rapidly in wheat plant and soil. Its metabolite initially showed a tendency of rapid increase followed by a decrease in wheat plant but could not be detected in soil. The data showed that the first + first‐order model was more suitable for describing the decline of afidopyropen in wheat and soil. The half‐lives of afidopyropen in wheat plant and soil were 1.65 and 1.21 days, respectively.     

Simultaneous separation and determination of 20 potential adulterant antigout and antiosteoporosis pharmaceutical compounds in herbal food products using LC with electrospray ionization MS/MS and LC with quadrupole‐time‐of‐flight MS

An analytical method for the simultaneous and reliable determination of 20 antigout and antiosteoporosis pharmaceutical compounds in adulterated health food products was developed using liquid chromatography with electrospray ionization tandem mass spectrometry and liquid chromatography with quadrupole‐time‐of‐flight mass spectrometry. The method was validated through the determination of specificity, linearity, limit of detection, and limit of quantification, method detection limit, method quantitation limit, precision, accuracy, recovery, and stability. The matrix effect was also determined. The validation results of the developed method are as follows: for solid and liquid blank samples, limits of detection ranged from 0.05 to 5.00 ng/mL and limits of quantification ranged from 0.15 to 15.00 ng/mL. Linearity was acceptable, and the correlation coefficients (R²) were ≥0.99 for all target compounds. Both intra and interday precision were less than 9.16% RSD, and accuracies ranged from 95.31 to 116.68%. Mean recoveries for different types of dietary supplements classified as powders, liquids, tablets, and capsules were found to be 80.81 to 117.62% with less than 15.00% relative standard deviation. The stability of the standard mixture solution was less than 11.72% relative standard deviation after 48 h. By the proposed method, the presence of dexamethasone was determined in seized herbal food products at concentrations that ranged from 126 to 215 µg/g.     

Trace determination of five triazole fungicide residues in traditional Chinese medicine samples by dispersive solid‐phase extraction combined with ultrasound‐assisted dispersive liquid–liquid microextraction and UHPLC–MS/MS

A novel and reliable method for determination of five triazole fungicide residues (triadimenol, tebuconazole, diniconazole, flutriafol, and hexaconazol) in traditional Chinese medicine samples was developed using dispersive solid‐phase extraction combined with ultrasound‐assisted dispersive liquid–liquid microextraction before ultra‐high performance liquid chromatography with tandem mass spectrometry. The clean up of the extract was conducted using dispersive solid‐phase extraction by directly adding sorbents into the extraction solution, followed by shaking and centrifugation. After that, a mixture of 400 μL trichloromethane (extraction solvent) and 0.5 mL of the above supernatant was injected rapidly into water for the dispersive liquid–liquid microextraction procedure. The factors affecting the extraction efficiency were optimized. Under the optimum conditions, the calibration curves showed good linearity in the range of 2.0–400 (tebuconazole, diniconazole, and hexaconazole) and 4.0–800 ng/g (triadimenol and flutriafol) with the regression coefficients higher than 0.9958. The limit of detection and limit of quantification for the present method were 0.5–1.1 and 1.8–4.0 ng/g, respectively. The recoveries of the target analytes ranged from 80.2 to 103.2%. The proposed method has been successfully applied to the analysis of five triazole fungicides in traditional Chinese medicine samples, and satisfactory results were obtained.     

Performance comparison of dispersive solid‐phase extraction and multiplug filtration cleanup methods for the determination of tefuryltrione in plant and environmental samples using UHPLC–MS/MS

The detection frequencies of tefuryltrione, a new type of 4‐hydroxyphenyl‐pyruvate dioxygenase inhibitor herbicide, are rarely reported, probably because of the paucity of analytical methods. Herein, an effective and sensitive analytical method has been developed to detect tefuryltrione in vegetables (tomato and cucumber), cereals (rice and corn), soil, and water by ultra high performance liquid chromatography coupled with tandem mass spectrometry. Comparisons of the performances of dispersive solid‐phase extraction and multiplug filtration cleanup methods were carried out for tefuryltrione in complex matrices. Extraction solvents and purification sorbents were further optimized for dispersive solid‐phase extraction. Tefuryltrione was analyzed with electrospray ionization in the positive mode within 2.0 min. Mean recoveries for tefuryltrione were 75.4–108.9% with relative standard deviations less than 11.0% at three fortification levels (10, 100, 500 μg/kg) in the sample matrixes. Limits of quantification ranged from 0.70 to 5.12 μg/kg, and an excellent linearity (R ² ≥ 0.9902) was obtained for tefuryltrione at concentrations of 5–1000 μg/L. The results showed that the developed dispersive solid‐phase extraction method could serve as an effective, sensitive, and robust method for routine monitoring of tefuryltrione residue in plants and environmental samples.