Recent Advances in Anodic Stripping Voltammetry with Bismuth‐Modified Carbon Paste Electrodes

In this article, the results of some recent investigations on two types of bismuth‐modified carbon paste electrodes are presented. In the first study, the bismuth‐film carbon paste electrode (BiF‐CPE) operated in situ and employed in anodic stripping voltammetry of Cd(II) and Pb(II) at the low μg L^?1 level was of interest in view of choosing the proper Bi(III)‐to‐Me(II) concentration ratios (where Me: Pb or Cd). Such optimization has resulted in significant improvement of detection limits down to 1.0 μg L^?1 Cd and 0.8 μg L^?1 for Pb, which allowed us to apply the BiF‐CPE for analysis of selected real samples of tap and sea water. The BiF‐CPE was also further investigated for its application in highly alkaline media. In this case, attention was focused on the complex‐forming capabilities of the OH ^– ions and their effect on the anodic stripping characteristics of some heavy metals (i.e. Cd, Pb, Tl) as well as upon the formation of the bismuth film itself. The last example deals with the continuing characterization of the recently introduced carbon paste electrodes modified with bismuth powder (Bi‐CPEs) which combine the advantageous properties of carbon paste material with the favorable electrochemical properties of bismuth. Three series of electrodes, differing either in the content of metallic bismuth (from 8 to 50% w/w) or in the type of the carbon powder used (two spectroscopic types of graphite and powdered glassy carbon), were compared and the respective relations to the optimal carbon paste composition evaluated. Attractive electroanalytical performance of the Bi‐CPE in anodic stripping voltammetry is demonstrated for selected model mixtures of heavy metals (Mn, Zn, Cd, Pb, Tl, and In).     

Weak Interactions under Pressure: hp‐CuBi and Its Analogues

The metastable binary compound hp‐CuBi was obtained from the direct chemical reaction between copper and bismuth at a pressure of 5 GPa and a temperature of 720 K. The atomic arrangement comprises slabs of puckered Cu layers sandwiched between Bi planes. The QTAIM charges calculated for compounds of bismuth with transition metals reveal negligible charge transfer for hp‐CuBi. Analysis of the chemical bonding with position‐space techniques discloses multicenter interactions within the Bi‐Cu‐Bi slabs and lone‐pair interactions of the van der Waals type between these entities. hp‐CuBi exhibits metal‐type electrical conductivity with superconductivity below T_c=1.3 K.     

Influence of Nafion Coatings and Surfactant on the Stripping Voltammetry of Heavy Metals at Bismuth‐Film Modified Carbon Film Electrodes

Nafion polymer coated bismuth‐film‐modified carbon film electrodes have been investigated for reducing the influence of contaminants such as surfactants in the anodic stripping voltammetry of trace metal ions. The influence of the coating on electrode response has been tested with both ex situ and in situ bismuth film deposition, with and without the polymer coating. The electrode assemblies and interfacial characteristics in the presence of the non‐ionic surfactant Triton‐X‐100 have been probed with electrochemical impedance spectroscopy. The Nafion coating successfully decreases the adsorption of Triton on the bismuth film surface, and demonstrates that this strategy allows measurement of these trace metals in environmental samples containing surfactants.     

Bismuth Film Voltammetric Sensor on Pyrolyzed Photoresist/Alumina Support for Determination of Heavy Metals

Voltammetric sensors based on bismuth film electrodes are an attractive alternative to other sensors for application in electroanalysis of heavy metals. Bismuth film electrodes can be formed by a similar method on the same substrates as mercury. These systems were used most frequently for simultaneous determination of heavy metals such as Pb, Cd and Zn by anodic stripping voltammetry. Our voltammetric sensor was fabricated on an alumina substrate. A photoresist film prepared by pyrolysis of positive photoresist S‐1813 SP15 on the alumina substrate was used as an electrode support for bismuth film deposition. The influence of the Nafion membrane on the measurement sensitivity of the sensor and mechanical stability of the bismuth film were investigated. The sensor was successfully applied for determination of Pb, Cd and Zn in an aqueous solution in the concentration range of 0.2 to 10 µg L^?1 by square wave anodic stripping voltammetry on an in‐situ formed bismuth film electrode with Nafion‐coating. Parameters of the sensor such as sensitivity, linearity, detection limit, repeatability and life‐time were evaluated. In the best case, the detection limits were estimated as 0.07, 0.11 and 0.63 µg L^?1 for Pb, Cd and Zn, respectively. Finally, the applicability of the sensor was tested in analysis of Pb, Cd and Zn in real samples of tap and river water using the method of standard additions.     

Effects of Humidity,Temperature and Bismuth Electrodeposition on Electroanalytical Performances of Nafion‐coated Printed Electrodes for Cd2+ and Pb2+ Detection

The synergistic use of Nafion polymeric membrane and in situ electrodeposited bismuth film is a worthwhile strategy to develop electrochemical sensors for the detection of Cd²⁺ and Pb²⁺. However, Nafion thin films morphological and conductivity properties have a strong dependence on the environmental conditions, such as relative humidity and temperature, while the bismuth in situ electroplating can affect the repeatability of measurements. With the aim to overcome these drawbacks, the effects of the storage environmental conditions were investigated to improve the morphological stability and electroanalytical performances of Nafion film‐based sensor for the detection of Cd²⁺ and Pb²⁺. Nafion‐coated graphite‐based screen‐printed electrodes were stored at different humidity and temperature conditions and characterised by using square wave anodic stripping voltammetry, cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy. Significant differences were observed at the varying of humidity conditions, with an enhancement of sensor electrochemical performances at lower humidity. Furthermore, different approaches for bismuth in situ electrodeposition on Nafion‐coated screen‐printed electrodes were compared by using overlap or removal approach. This study disclosed considerable differences in the electrochemical performances and morphology of the resulting bismuth‐sensor, obtaining an enhancement of the working stability for the removal approach.     

Fourier-transform mass spectroscopic studies of ionized atoms and clusters produced by laser vaporization of metals and semiconductors

A Fourier-transform mass spectrometer (FTMS) has been used to trap and detect cluster ions formed by laser vaporization of metals and semiconductors. It is shown that the technique works for those elements whose equilibrium vapors tend to contain molecular species. For more“ typical” metals whose vapors are usually monatomic including most transition metals, only monatomic ions are obtained. Cluster ions were observed for silicon, germanium, and bismuth. No cluster ions were observed for aluminum, scandium, vanadium, or niobium.     

Disposable Bismuth Oxide Screen Printed Electrodes for the High Throughput Screening of Heavy Metals

We present a simplified approach for the trace screening of toxic heavy metals utilizing bismuth oxide screen printed electrodes. The use of bismuth oxide instead of toxic mercury films facilitates the reliable sensing of lead(II), cadmium(II) and zinc(II). A linear range over 5 to 150 μg L^?1 with detection limits of 2.5 and 5 μg L^?1 are readily observed for cadmium and lead in 0.1 M HCl, respectively. Conducting a simultaneous multi‐elemental voltammetric detection of zinc, cadmium and lead in a higher pH medium (0.1 M sodium acetate solution) exhibited a linear range between 10 and 150 μg L^?1 with detection limits of 5, 10 and 30 μg L^?1 for cadmium, lead and zinc respectively. The sensor is greatly simplified over those recently reported such as bismuth nanoparticle modified electrodes and bismuth film coated screen printed electrodes. The scope of applications of this sensor with the inherent advances in electroanalysis coupled with the negliable toxicity of bismuth is extensive allowing high throughput electroanalysis.     

Direct determination of bismuth and antimony in sea water by anodic stripping voltammetry

A method based on anodic stripping voltammetry at the mercury-coated graphite electrode has been developed for the direct determination of bismuth and antimony at their natural levels in sea water. Bismuth plated at -0.4 V from sea water made 1 M in hydrochloric acid gives a stripping peak proportional to concentration at -0.2 V without interference from antimony or other metals normally present. Antimony may be plated from sea water made 4 M in hydrochloric acid and gives a stripping peak at -0.2 V proportional to the sum of bismuth and antimony. By use of the standard addition technique, satisfactory results were obtained for sea water samples with concentration ranges of 0.02–0.09 μg kg^?1 for bismuth and 0.2–0.5 μg kg^?1 for antimony.     

Bismuth Film Microelectrode Modified with Overoxidized Poly‐1‐Naphtylamine Protective Membrane for Enhanced Stripping Voltammetric Detection

The application of protective overoxidized poly‐1‐naphtylamine membrane (ONAP) is demonstrated in combination with bismuth film microelectrode (ONAP‐BiFME) for anodic stripping voltammetric measurement of trace heavy metals in the presence of some selected surfactants. The ONAP membrane was electrochemically deposited on the surface of bare single carbon fiber microelectrode followed by the in situ or ex situ preparation of the bismuth film. The key operational parameters influencing the stripping performance of the ONAP‐BiFME were optimized and its electroanalytical performance was examined in the model solution containing Cd(II) and Pb(II) as test metal ions. The ONAP‐BiFME exhibited significantly enhanced stripping voltammetric response (approximately 70% for Cd(II) and 45% for Pb(II)) in comparison with unmodified BiFME in the absence of surfactants. In the presence of high concentrations, e.g., 20 mg L^?1, of anionic or cationic surfactants, the stripping signal for, e.g., Cd(II) decreased for less than 6% at the ONAP‐BiFME, whereas at the unmodified BiFME the signal attenuated considerably (approximately 38%). Moreover, in the presence of 10 mg L^?1 of nonionic surfactant Triton X‐100, the stripping signals at the bare BiFME were almost completely suppressed, whereas at the ONAP‐BiFME exhibited linear concentration behavior in the examined concentration range from 10 to 120 μg L^?1, with the calculated limit of detection of 5.0 μg L^?1 and 3.4 μg L^?1 for Cd(II) and Pb(II), respectively in connection with 60 s accumulation time. The attractive behavior of ONAP‐modified BiFME expands the applicability of bismuth‐based electrodes for measurement of trace heavy metals in real environments, where the presence of more complex matrix can be expected.     

Extraction-spectrophotometric determination of traces of bismuth in lead,copper and nickel metals,and in copper-base alloys with tri-n-octylamine

A rapid and sensitive spectrophotometric method has been developed for the determination of bismuth in lead, copper and nickel metals, and in copper-base alloys. Optimal conditions have been established for the extraction and determination of bismuth. Bismuth is extracted with a benzene solution of tri-n-octylamine in the presence of hydrobromic acid and the absorbance of the extract (bromo-complex of bismuth) at 380 nm is measured. As little as 0.5 p.p.m. of bismuth in these metals and alloys can be determined.     

Electrochemistry of and Redox‐Induced Metal Release from Metallothioneins at a Nafion‐Coated Bismuth Film Electrode

Nafion‐coated bismuth film electrodes (NCBiFEs) were used to investigate the redox behavior of and metal release from rabbit liver metallothioneins (MTs) in an acetate buffer. Owing to the permselective exchange between positively charged MT molecules and cations in Nafion and the absence of detectable MT adsorption at bismuth surface, a diffusion‐controlled Nernstian redox wave of MTs (E_pc=?0.869 V) was observed for the first time. The Nernstian behavior of the diffusing MTs is in contrast to the voltammetric responses of MTs at thin mercury films or Nafion‐coated mercury film electrodes, which either result in the replacement of the metals originally present in MTs by mercury or lead to a noticeable MT adsorption. By avoiding these undesirable features, the NCBiFE provides an excellent milieu for voltammetric studies of different types of MTs and related isoforms, paving the way for studying the redox‐modulated metal transfer of MTs and understanding the biological role of MTs in heavy metal detoxification and essential metal regulations.     

Template‐Free Fabrication of Bi2O3 and (BiO)2CO3 Nanotubes and Their Application in Water Treatment

Uniform bismuth oxide (Bi₂O₃) and bismuth subcarbonate ((BiO)₂CO₃) nanotubes were successfully synthesized by a facile solvothermal method without the need for any surfactants or templates. The synergistic effect of ethylene glycol (EG) and urea played a critical role in the formation of the tubular nanostructures. These Bi₂O₃ and (BiO)₂CO₃ nanotubes exhibited excellent Cr^VI‐removal capacity. Bi₂O₃ nanotubes, with a maximum Cr^VI‐removal capacity of 79 mg g^?1, possessed high removal ability in a wide range of pH values (3–11). Moreover, Bi₂O₃ and (BiO)₂CO₃ nanotubes also displayed highly efficient photocatalytic activity for the degradation of RhB under visible‐light irradiation. This work not only demonstrates a new and facile route for the fabrication of Bi₂O₃ and (BiO)₂CO₃ nanotubes, but also provides new promising adsorbents for the removal of heavy‐metal ions and potential photocatalysts for environmental remediation.     

Indirect detection of protein-Metal binding: Interaction of serum transferrin with In<Superscript>3+</Superscript> and Bi<Superscript>3+</Superscript>

Transferrins comprise a class of monomeric glycoproteins found in all vertebrates, whose function is iron sequestration and transport. In addition to iron, serum transferrin also binds a variety of other metals and is believed to provide a route for the in vivo delivery of such metals to cells. In the present study, ESI MS is used to investigate interactions between human serum transferrin and two nonferrous metals, indium (a commonly used imaging agent) and bismuth (a component of many antiulcer drugs). While the UV-Vis absorption spectroscopy measurements clearly indicate that both metals bind strongly to transferrin in solution, the metal-protein complex can be detected by ESI MS only for indium, but not for bismuth. Despite the apparently low stability of the transferrin-bismuth complex in the gas phase, presence of such complex in solution can be established by ESI MS indirectly. This is done by monitoring the evolution of charge state distributions of transferrin ions upon acid-induced protein unfolding in the presence and in the absence of the metal in solution. The anomalous instability of the transferrin-bismuth complex in the gas phase is rationalized in terms of conformational differences between this form of transferrin and the holo-forms of this protein produced by binding of metals with smaller ionic radii (e.g., Fe3+ and In3+). The large size of Bi3+ ion is likely to prevent formation of a closed conformation (canonical structure of the holo-protein), resulting in a non-native metal coordination. It is suggested that transferrin retains the open conformation (characteristic of the apo-form) upon binding Bi3+, with only two ligands in the metal coordination sphere provided by the protein itself. This suggestion is corroborated by the results of circular dichroism measurements in the near-UV range. Since the cellular consumption of metals in the transferrin cycle critically depends upon recognition of the holo-protein complex by the transferrin receptor, the noncanonical conformation of the transferrin-bismuth complex may explain very inefficient delivery of bismuth to cells even when a high dosage of bismuth-containing drugs is administered for prolonged periods of time.     

Bismuth-film-plated carbon paste electrodes

In this preliminary note, carbon paste electrodes (CPEs) plated with a bismuth film are presented. The bismuth film can be generated onto the carbon paste surface either from an external plating solution or in situ; the latter being performed in two ways: (i) as a spike of the Bi³⁺ ions to the solution or (ii) via modifying the carbon paste with solid bismuth oxide (5% m/m). As shown on selected examples, bismuth-film-plated CPEs exhibit a good performance in voltammetric stripping analysis of some heavy metals such as Pb, Cd, and Zn.     

The Influence of the Electrodeposition Conditions on the Electroanalytical Performance of the Bismuth Film Electrode for Lead Determination

The bismuth film is a great promise as a suitable material to replace the mercury electrodes due to its low toxicity and good cathodic potential range. This work studies the influence of the electrodeposition conditions in the morphology and electroanalytical performance of the bismuth film electrodeposited onto copper electrode. The bismuth films were obtained in nitric or hydrochloric acid solutions with and without the presence of sodium citrate. The films were characterized by field emission scanning electron microscopy (FE‐SEM) and scanning electron microscopy with energy dispersive X‐ray spectrometry (SEM‐EDX). The microscopic analysis of the bismuth film obtained in HCl solution with sodium citrate (BIFE‐Cit) showed more homogeneous structure with higher content of bismuth than the film obtained in HCl only (BiFE‐HCl). The BiFE‐Cit exhibited a better analytical performance for lead with good adherence to the copper substrate.     

Visible‐Light Photocatalytic Hydrogen Generation by Using Dye‐Sensitized Graphene Oxide as a Photocatalyst

Dye‐sensitized graphene oxide is able to generate hydrogen from water/methanol mixtures (80:20) by using visible or solar light. The most efficient photocatalyst tested contained a tris(2,2‐bipyridyl) ruthenium(II) complex incorporated in the interlayer spaces of a few layers of graphene oxide with a moderate degree of oxidation. The graphene oxide‐based photocatalyst does not contain noble metals and we have determined that it is two orders of magnitude more active than catalysts based on conventional titania.     

Preparation and Characterization of Exfoliated Poly(ethyleneterephthalate)/Montmorillonite Nanocomposites Using Modified MMTs with Variable Content of Antimony Acetate

Poly(ethylene terephthalate) (PET)/montmorillonite (MMT) nanocomposite was prepared by the direct polymerization with MMTs modified with variable content of antimony acetate (Sb(OAc)₃), which was also used as catalyst polymerization. The modified MMTs (AS‐Sb‐MMT) were prepared by intercalating both Sb(OAc)₃ and amphoteric surfactant (AS) into MMT layers. Nine kinds of Sb‐MMTs [MMT treated with Sb(OAc)₃] with different Sb content were obtained, but only six kinds of PET/MMT nanocomposites could be prepared. ICPAES was used to characterize Sb content of modified MMT, XRD was used to characterize interlayer spacing, IR spectroscopy was used to characterize composition change of Sb catalyst in modified MMT and TEM was used to investigate micromorphology of PET/MMT nanocomposites. Several results are obtained, i.e., (a) Sb content of Sb‐MMT is affected by both drying temperature and washing‐drying sequence, (b) compared with Na‐MMT (unmodified MMT), the change in the interlayer spacing of Sb‐MMT is attributed to the solvent ethylene glycol (EG) rather than the intercalated or absorbed Sb(OAc)₃, (c) based on this, a model is developed to describe the swelling of Na‐MMT and modified MMT by EG and the effect of drying temperature on the interlayer spacing, (d) exfoliation state of MMT in PET matrix of nanocomposites is controlled not only by Sb content and interlayer spacing, but also by the composition of Sb catalyst in modified MMT.     

Controllable Synthesis of Few‐Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance

Two‐dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few‐layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO₂ reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co‐existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier‐transformed alternating current voltammetry (FTacV) are attributed to CO₂ reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO₂^.? is the rate determining step for bismuth catalysed CO₂ reduction.     

Dynamic Coupling at Low Reynolds Number

Collective and emergent behaviors of active colloids provide useful insights into the statistical physics of out‐of‐equilibrium systems. Colloidal suspensions containing microscopic active swimmers have been intensively studied to understand the principles of energy transfer at low Reynolds number conditions. Studies on active enzymes and Ångström‐sized organometallic catalysts have demonstrated that energy can even be transferred by molecules to their surroundings, thereby influencing the overall dynamics of the systems substantially. By monitoring the diffusion of non‐reacting tracers in active solutions, it has been shown that the nature of energy transfer in systems containing different swimmers is surprisingly similar—irrespective of their size, modes of energy transduction, and propulsion strategies. This Review discusses research results obtained so far in this direction, highlighting the common features observed in the dynamic coupling of swimmers with their surroundings.     

A Novel Cell Design for the Improved Stripping Voltammetric Detection of Zn(II), Cd(II), and Pb(II) on Commercial Screen‐Printed Strips by Bismuth Codeposition in Stirred Solutions

A novel electrochemical cell design is proposed to allow fast, reproducible and highly efficient convective transport of dissolved substances to screen‐printed electrochemical three‐electrode strips mounted on miniaturized plastic vessels, with the goal of improving detection limits in disposable electrochemical stripping field sensors. The experimental configuration has been tested for accumulation of the selected heavy metals ions Zn(II), Cd(II), and Pb(II), codeposited with bismuth ions on a carbon disk screen‐printed working electrode before detection by square wave anodic stripping voltammetry. Chemical and instrumental variables of the proposed device and associate electrochemical method were optimized. Selected parameters gave detection limits in the low ng mL^?1 range with moderate deposition time (120 s). Practical applicability was tested on certified water and real samples (tap water and waste water), with acceptable results, suggesting potential usefulness for field environmental monitoring of heavy metals.