Highly Efficient Photoelectrochemical Water Splitting with an Immobilized Molecular Co4O4 Cubane Catalyst

Molecular Co₄O₄ cubane water oxidation catalysts were combined with BiVO₄ electrodes for photoelectrochemical (PEC) water splitting. The results show that tuning the substituent groups on cobalt cubane allows the PEC properties of the final molecular catalyst/BiVO₄ hybrid photoanodes to be tailored. Upon loading a new cubane complex featuring alkoxy carboxylato bridging ligands ( 1 h ) on BiVO₄, an AM 1.5G photocurrent density of 5 mA cm⁻² at 1.23 V vs. RHE for water oxidation was obtained, the highest photocurrent for undoped BiVO₄ photoanodes. A high solar‐energy conversion efficiency of 1.84 % was obtained for the integrated photoanode, a sixfold enhancement over that of unmodified BiVO₄. These results and the high surface charge separation efficiency support the role of surface‐modified molecular catalysts in improving PEC performance and demonstrate the potential of molecule/semiconductor hybrids for efficient artificial photosynthesis.     

Metal-Organic Framework Glass Catalysts from Melting Glass-Forming Cobalt-Based Zeolitic Imidazolate Framework for Boosting Photoelectrochemical Water Oxidation

Sluggish oxygen evolution kinetics and serious charge recombination restrict the development of photoelectrochemical (PEC) water splitting. The advancement of novel metal–organic frameworks (MOFs) catalysts bears practical significance for improving PEC water splitting performance. Herein, a MOF glass catalyst through melting glass-forming cobalt-based zeolitic imidazolate framework (Co-a_gZIF-62) was introduced on various metal oxide (MO: Fe₂O₃, WO₃ and BiVO₄) semiconductor substrates coupled with NiO hole transport layer, constructing the integrated Co-a_gZIF-62/NiO/MO photoanodes. Owing to the excellent conductivity, stability and open active sites of MOF glass, Co-a_gZIF-62/NiO/MO photoanodes exhibit a significantly enhanced photoelectrochemical water oxidation activity and stability in comparison to pristine MO photoanodes. From experimental analyses and density functional theory calculations, Co-a_gZIF-62 can effectively promote charge transfer and separation, improve carrier mobility, accelerate the kinetics of oxygen evolution reaction (OER), and thus improve PEC performance. This MOF glass not only serves as an excellent OER cocatalyst on tunable photoelectrodes, but also enables promising opportunities for PEC devices for solar energy conversion.     

Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Solar‐Assisted eBiorefinery: Photoelectrochemical Pairing of Oxyfunctionalization and Hydrogenation Reactions

Inspired by natural photosynthesis, biocatalytic photoelectrochemical (PEC) platforms are gaining prominence for the conversion of solar energy into useful chemicals by combining redox biocatalysis and photoelectrocatalysis. Herein, we report a dual biocatalytic PEC platform consisting of a molybdenum (Mo)‐doped BiVO₄ (Mo:BiVO₄) photoanode and an inverse opal ITO (IO‐ITO) cathode that gives rise to the coupling of peroxygenase and ene‐reductase‐mediated catalysis, respectively. In the PEC cell, the photoexcited electrons generated from the Mo:BiVO₄ are transferred to the IO‐ITO and regenerate reduced flavin mononucleotides to drive ene‐reductase‐catalyzed trans‐hydrogenation of ketoisophrone to (R)‐levodione. Meanwhile, the photoactivated Mo:BiVO₄ evolves H₂O₂ in situ via a two‐electron water‐oxidation process with the aid of an applied bias, which simultaneously supplies peroxygenases to drive selective hydroxylation of ethylbenzene into enantiopure (R)‐1‐phenyl‐1‐hydroxyethane. Thus, the deliberate integration of PEC systems with redox biocatalytic reactions can simultaneously produce valuable chemicals on both electrodes using solar‐powered electrons and water.     

Unveiling the Activity and Stability Origin of BiVO4 Photoanodes with FeNi Oxyhydroxides for Oxygen Evolution

Understanding the origin of formation and active sites of oxygen evolution reaction (OER) cocatalysts is highly required for solar photoelectrochemical (PEC) devices that generate hydrogen efficiently from water. Herein, we employed a simple pH-modulated method for in situ growth of FeNi oxyhydroxide ultrathin layers on BiVO₄ photoanodes, resulting in one of the highest currently known PEC activities of 5.8 mA cm⁻² (1.23 V_RHE, AM 1.5 G) accompanied with an excellent stability. More importantly, both comparative experiments and density functional theory (DFT) studies clearly reveal that the selective formation of Bi−O−Fe interfacial bonds mainly contributes the enhanced OER activities, while the construction of V−O−Ni interfacial bonds effectively restrains the dissolution of V⁵⁺ ions and promotes the OER stability. Thereby, the synergy between iron and nickel of FeNi oxyhydroxides significantly improved the PEC water oxidation properties of BiVO₄ photoanodes.     

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄/VO_x photoanode exhibits a photocurrent density of 6.29 mA cm⁻² at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.     

一步醇-水热法合成高效的F掺杂BiVO4光催化剂

以NH₄F为掺杂前体,采用简单的一步醇-水热法制备了F掺杂BiVO₄光催化剂。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、紫外-可见漫反射光谱（UV-Vis）和光致发光光谱（PL）表征了这些光催化剂的物理化学性质。在少量H₂O₂存在条件下,以可见光照射下光催化降解苯酚的反应测定了这些光催化剂的催化活性。研究表明,相较于未掺杂的BiVO₄样品而言,F掺杂BiVO₄样品不仅仍保留了单斜结构,而且有更高的结晶度、表面氧空位密度和光生电荷载流子分离效率,更强的光吸收和更低的带隙能。在这些F掺杂BiVO₄样品中,以n_F/n_Bi的理论值为1.0且带隙能为2.43 eV的F掺杂BiVO₄样品的光催化活性最好（90 min内苯酚的降解率可达95%）。这一优良的光催化性能与其具有最高的结晶度、表面氧空位密度和光生电荷载流子分离效率,最强的光吸收和最低的带隙能有关。     

An Efficient Strategy for Boosting Photogenerated Charge Separation by Using Porphyrins as Interfacial Charge Mediators

Surface recombination at the photoanode/electrolyte junction seriously impedes photoelectrochemical (PEC) performance. Through coating of photoanodes with oxygen evolution catalysts, the photocurrent can be enhanced; however, current systems for water splitting still suffer from high recombination. We describe herein a novel charge transfer system designed with BiVO₄ as a prototype. In this system, porphyrins act as an interfacial‐charge‐transfer mediator, like a volleyball setter, to efficiently suppress surface recombination through higher hole‐transfer kinetics rather than as a traditional photosensitizer. Furthermore, we found that the introduction of a “setter” can ensure a long lifetime of charge carriers at the photoanode/electrolyte interface. This simple interface charge‐modulation system exhibits increased photocurrent density from 0.68 to 4.75 mA cm^?2 and provides a promising design strategy for efficient photogenerated charge separation to improve PEC performance.     

Ultrathin FeOOH Nanolayers with Abundant Oxygen Vacancies on BiVO4 Photoanodes for Efficient Water Oxidation

Photoelectrochemical (PEC) water splitting is a promising method for storing solar energy in the form of hydrogen fuel, but it is greatly hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Herein, a facile solution impregnation method is developed for growing ultrathin (2 nm) highly crystalline β‐FeOOH nanolayers with abundant oxygen vacancies on BiVO₄ photoanodes. These exhibited a remarkable photocurrent density of 4.3 mA cm^?2 at 1.23 V (vs. reversible hydrogen electrode (RHE), AM 1.5 G), which is approximately two times higher than that of amorphous FeOOH fabricated by electrodeposition. Systematic studies reveal that the excellent PEC activity should be attributed to their ultrathin crystalline structure and abundant oxygen vacancies, which could effectively facilitate the hole transport/trapping and provide more active sites for water oxidation.     

Identifying Copper Vacancies and Their Role in the CuO Based Photocathode for Water Splitting

Metal oxides are an important family of semiconductors for effective photoelectrodes in solar‐to‐chemical energy conversion. Defect engineering, such as modification of oxygen vacancy density, has been extensively applied in tailoring the optoelectric properties of photoelectrodes. Very limited attention has been paid to the influence of metal vacancies. Herein, we study metal vacancies in a typical CuO photocathode for photoelectrochemical (PEC) water splitting. The Cu vacancies can improve the charge carrier concentration, and facilitate the charge separation and transfer in the CuO photocathode. By changing the O₂ partial pressure, the density of Cu vacancies can be tuned, which leads to improved PEC performance. The CuO photocathode prepared in pure O₂ exhibits a 100 % photocurrent increase compared to that prepared in air. The promotion effect of Cu vacancies on the PEC is also observed in other Cu based photocathodes, showing the generic role of metal vacancies in efficient photocathodes.     

Subsurface Engineering Induced Fermi Level De-pinning in Metal Oxide Semiconductors for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising approach for renewable solar light conversion. However, surface Fermi level pinning (FLP), caused by surface trap states, severely restricts the PEC activities. Theoretical calculations indicate subsurface oxygen vacancy (sub-O_v) could release the FLP and retain the active structure. A series of metal oxide semiconductors with sub-O_v were prepared through precisely regulated spin-coating and calcination. Etching X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), and electron energy loss spectra (EELS) demonstrated O_v located at sub ∼2–5 nm region. Mott–Schottky and open circuit photovoltage results confirmed the surface trap states elimination and Fermi level de-pinning. Thus, superior PEC performances of 5.1, 3.4, and 2.1 mA cm⁻² at 1.23 V vs. RHE were achieved on BiVO₄, Bi₂O₃, TiO₂ with outstanding stability for 72 h, outperforming most reported works under the identical conditions.     

Towards Long‐Term Photostability of Nickel Hydroxide/BiVO4 Photoanodes for Oxygen Evolution Catalysts via In Situ Catalyst Tuning

Increasing long‐term photostability of BiVO₄ photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO₄ junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO₄ and NiOOH/electrolyte junctions. Further, adding Fe²⁺ into the borate buffer electrolyte alleviates the active but unstable character of etched‐NiOOH/BiVO₄, leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long‐term durability.     

Stable Cocatalyst-Free BiVO4 Photoanodes with Passivated Surface States for Photocorrosion Inhibition

Improving charge transport and reducing bulk/surface recombination can increase the activity and stability of BiVO₄ for water oxidation. Herein we demonstrate that the photoelectrochemical (PEC) performance of BiVO₄ can be significantly improved by potentiostatic photopolarization. The resulting cocatalyst-free BiVO₄ photoanode exhibited a record-high photocurrent of 4.60 mA cm⁻² at 1.23 V_RHE with an outstanding onset potential of 0.23 V_RHE in borate buffer without a sacrificial agent under AM 1.5G illumination. The most striking characteristic was a strong “self-healing” property of the photoanode, with photostability observed over 100 h under intermittent testing. The synergistic effects of the generated oxygen vacancies and the passivated surface states at the semiconductor–electrolyte interface as a result of potentiostatic photopolarization reduced the substantial carrier recombination and enhanced the water oxidation kinetics, further inhibiting photocorrosion.     

Boosting charge separation of BiVO4 photoanode modified with 2D metal-organic frameworks nanosheets for high-performance photoelectrochemical water splitting

Water splitting by photoelectrochemical (PEC) processes to convert solar energy into hydrogen energy using semiconductors is regarded as one of the most ideal methods to solve the current energy crisis and has attracted widespread attention. Herein, Co-based metal-organic framework (Co(bpdc)(H₂O)₄ (Co-MOF) nanosheets as passivation layers were in-situ constructed on the surface of BiVO₄ films through an uncomplicated hydrothermal method (Co-MOF/BiVO₄). Under AM 1.5G illumination, synthesized Co-MOF/BiVO₄ electrode exhibited a 4-fold higher photocurrent than bare BiVO₄, measuring 6.0 mA/cm² at 1.23 V vs. RHE in 1 mol/L potassium borate electrolyte (pH 9.5) solution. Moreover, the Co-MOF/BiVO₄ film demonstrated a 96% charge separation efficiency, a result caused by an inhibited recombination rate of photogenerated electrons and holes by the addition of Co-MOF nanosheets. This work provides an idea for depositing inexpensive 2D Co-MOF nanosheets on the photoanode as an excellent passivation layer for solar fuel production.     

BiVO4/TiO2 core-shell heterostructure: wide range optical absorption and enhanced photoelectrochemical and photocatalytic performance

In the present study, pristine BiVO₄, TiO₂ and BiVO₄/TiO₂ core-shell heterostructured nanoparticles are prepared by hydrothermal methods and studied for structural, morphological, optical, photoelectrochemical water splitting and photocatalytic degradation of methylene blue as an organic pollutant. Both pristine BiVO₄ and TiO₂ exhibit poor PEC and PC performance under visible light illumination. However, an enhanced PEC and PC activity in BiVO₄/TiO₂ core-shell heterostructure is observed due to high solar energy absorption and superior charge separation properties in core-shell nanoparticles. The photoelectrode prepared using BiVO₄/TiO₂ core-shell nanoparticles exhibit a photocathode behavior and produced cathodic photocurrent, however, the pristine BiVO₄ and TiO₂ photoelectrodes act as photoanode and produced anodic photocurrent. This behavior of change in current direction is also observe in the Mott-Schottky analysis where the BiVO₄/TiO₂ core-shell nanoparticles photoelectrode exhibits the positive slow showing p-type semiconducting behavior. The change in cathodic photoresponse in core-shell nanoparticles in comparison to anodic photoresponse of BiVO₄ and TiO₂ nanoparticles is explained in terms of the variations in the work function values. These results highlight the advantages of core-shell nanoparticle of suitable materials for photocatalytic and photoelectrochemical applications.     

Promoted photoelectrochemical activity of BiVO<Subscript>4</Subscript> coupled with LaFeO<Subscript>3</Subscript> and LaCoO<Subscript>3</Subscript>

BiVO₄ has emerged as a promising material for solar water splitting. The poor ability of charge transport and separation always limits its performance for photoelectrochemical water splitting. Herein, we coupled n-type BiVO₄ with p-type LaFeO₃ and LaCoO₃, achieving a photocurrent more than two times as high as bare BiVO₄ at 1.23 V versus a reversible hydrogen electrode. Also, the onset potential was negatively shifted about 260 mV. The promotion of performance is mainly because the space charge layer in BiVO₄ is broadened, and the band bend is enhanced, which facilitates the separation and transport of photo-generated charges.     

Solar-Assisted eBiorefinery: Photoelectrochemical Pairing of Oxyfunctionalization and Hydrogenation Reactions

Inspired by natural photosynthesis, biocatalytic photoelectrochemical (PEC) platforms are gaining prominence for the conversion of solar energy into useful chemicals by combining redox biocatalysis and photoelectrocatalysis. Herein, we report a dual biocatalytic PEC platform consisting of a molybdenum (Mo)-doped BiVO₄ (Mo:BiVO₄) photoanode and an inverse opal ITO (IO-ITO) cathode that gives rise to the coupling of peroxygenase and ene-reductase-mediated catalysis, respectively. In the PEC cell, the photoexcited electrons generated from the Mo:BiVO₄ are transferred to the IO-ITO and regenerate reduced flavin mononucleotides to drive ene-reductase-catalyzed trans-hydrogenation of ketoisophrone to (R)-levodione. Meanwhile, the photoactivated Mo:BiVO₄ evolves H₂O₂ in situ via a two-electron water-oxidation process with the aid of an applied bias, which simultaneously supplies peroxygenases to drive selective hydroxylation of ethylbenzene into enantiopure (R)-1-phenyl-1-hydroxyethane. Thus, the deliberate integration of PEC systems with redox biocatalytic reactions can simultaneously produce valuable chemicals on both electrodes using solar-powered electrons and water.     

Enhanced Photoelectrochemical Water Splitting through Bismuth Vanadate with a Photon Upconversion Luminescent Reflector

As the performance of photoanodes for solar water splitting steadily improves, the extension of the absorption wavelength in the photoanodes is highly necessary to substantially improve the water splitting. We use a luminescent back reflector (LBR) capable of photon upconversion (UC) to improve the light harvesting capabilities of Mo:BiVO₄ photoelectrodes. The LBR is prepared by dispersing the organic dye pair meso‐tetraphenyltetrabenzoporphine palladium and perylene capable of triplet–triplet annhilation‐based UC in a polymer film. The LBR converts the wavelengths of 600–650 nm corresponding to the sub‐band gap of Mo:BiVO₄ and the wavelengths of 350–450 nm that are not sufficiently absorbed in Mo:BiVO₄ to a wavelength that can be absorbed by a Mo:BiVO₄ photoelectrode. The LBR improves the water splitting reaction of Mo:BiVO₄ photoelectrodes by 17 %, and consequently, the Mo:BiVO₄/LBR exhibits a photocurrent density of 5.25 mA cm^?2 at 1.23 V versus the reversible hydrogen electrode. The Mo:BiVO₄/LBR exhibits hydrogen/oxygen evolution corresponding to the increased photocurrent density and long‐term operational stability for the water splitting reaction.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Spatially Separated Photosystem II and a Silicon Photoelectrochemical Cell for Overall Water Splitting: A Natural–Artificial Photosynthetic Hybrid

Integrating natural and artificial photosynthetic platforms is an important approach to developing solar‐driven hybrid systems with exceptional function over the individual components. A natural–artificial photosynthetic hybrid platform is formed by wiring photosystem II (PSII) and a platinum‐decorated silicon photoelectrochemical (PEC) cell in a tandem manner based on a photocatalytic‐PEC Z‐scheme design. Although the individual components cannot achieve overall water splitting, the hybrid platform demonstrated the capability of unassisted solar‐driven overall water splitting. Moreover, H₂ and O₂ evolution can be separated in this system, which is ascribed to the functionality afforded by the unconventional Z‐scheme design. Furthermore, the tandem configuration and the spatial separation between PSII and artificial components provide more opportunities to develop efficient natural–artificial hybrid photosynthesis systems.