Hydrothermal oxidation synthesis of rod‐like ZnO and the influence of oxygen vacancy on photocatalysis

Rod‐like ZnO nanoparticles (NPs ) were synthesized from zinc powder by a simple hydrothermal oxidation method. The presence of acetylacetone could promote the oxidation reaction of Zn and the formation of hexagonal nanorods. Then, the as‐prepared samples were annealed in N₂ , O₂ , and air atmosphere at 550°C for 2 h to control the number of oxygen vacancies in the samples. The samples were characterized by X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy, and UV –vis spectroscopy. The correlation between the oxygen vacancies and the photocatalytic activity was investigated. The results reveal that the annealing process alters the samples’ bandgap and number of the oxygen vacancies, thereby improving the photocatalytic activity. The enhancement of photodegradation efficiency arising from the appropriate content of oxygen vacancies is discussed.     

Selective Coke Combustion by Oxygen Pulsing During Mo/ZSM‐5‐Catalyzed Methane Dehydroaromatization

Non‐oxidative methane dehydroaromatization is a promising reaction to directly convert natural gas into aromatic hydrocarbons and hydrogen. Commercialization of this technology is hampered by rapid catalyst deactivation because of coking. A novel approach is presented involving selective oxidation of coke during methane dehydroaromatization at 700 °C. Periodic pulsing of oxygen into the methane feed results in substantially higher cumulative product yield with synthesis gas; a H₂/CO ratio close to two is the main side‐product of coke combustion. Using ¹³C isotope labeling of methane it is demonstrated that oxygen predominantly reacts with molybdenum carbide species. The resulting molybdenum oxides catalyze coke oxidation. Less than one‐fifth of the available oxygen reacts with gaseous methane. Combined with periodic regeneration at 550 °C, this strategy is a significant step forward, towards a process for converting methane into liquid hydrocarbons.     

Cu‐Based Nanocomposites as Multifunctional Catalysts

Herein, we report the synthesis of Cu/Cu₂O nanocomposites by a one‐step hydrothermal process at 180 °C, for which the resulting morphology is dependent on the hydrothermal reaction time (24, 72, and 120 h). With a longer reaction time of 120 h, a rod‐shape morphology is obtained, whereas at 72 and 24 h assemblies of nanoparticles are obtained. The rod‐shaped (120 h) particles of the Cu/Cu₂O nanocomposites show a much higher efficiency (6.3 times) than the agglomerates and 2.5 times more than the assemblies of nanoparticles for the hydrogen‐evolution reaction. During the oxygen‐evolution reaction, the nanorods produce a current that is 5.2 and 3.7 times higher than that produced by the agglomerated and assembled nanoparticles, respectively. The electrocatalysts are shown to be highly stable for over 50 cycles. As catalysts for organic synthesis, a 100 % yield is achieved in the Sonogashira cross‐coupling reaction with the nanorods, which is higher than with the other nanocomposite particles. This result demonstrates the significant enhancement of yield obtained with the nanorods for cross‐coupling reactions.     

Effects of annealing on the surface structure of Ga‐isotope‐implanted single‐crystal ZnO

We studied the effects of Ga isotope implantation on surface structure using single‐crystal (0001) ZnO with an atomically flat surface. The surface morphology with steps and terraces was greatly changed by Ga implantation and post‐annealing: the step‐and‐terrace structure was suppressed by Ga implantation but a step‐and‐terrace structure appeared on the surface after post‐annealing at 900 °C for 4 min. The diffusion of Ga towards the surface through dislocation pipes at a density of up to 5 × 10⁸ cm^?2 was the dominant mechanism, and a significant amount of Ga moved from the implanted layer to the surface. The reaction between Ga and ZnO during post‐annealing appeared to improve sheet resistance and surface morphology. Copyright © 2005 John Wiley & Sons, Ltd.     

Heteroatom‐containing ferrocene derivatives as catalysts for MWCNTs and other shaped carbon nanomaterials

The effects of heteroatom‐containing ferrocene catalysts on the materials produced from chemical vapour deposition (CVD) floating catalyst synthesis were investigated. Specifically, the influence of nitrogen‐ and oxygen‐containing ferrocenoyl imidazolide and (N‐phenylcarbamoyl)ferrocene, and sulfur‐ and oxygen‐containing S,S‐bis(ferrocenylmethyl)dithiocarbonate on the structural morphology and distribution of the products as well as properties such as the thermal stability and crystallinity were studied. In addition, the influence of reaction parameters such as catalyst concentration and temperature were also investigated. The nitrogen‐containing catalysts produced N‐doped multi‐walled carbon nanotubes (N‐MWCNTs), whereas the sulfur‐containing catalyst produced primarily nano‐ and microspheres. A concentration of 2.5 wt% ferrocenoyl imidazolide was shown to be optimal for the synthesis of MWCNTs at 850 °C, with very low metal iron residue, highest thermal stability and highest yield (95%). In general, bamboo compartment length for N‐doped MWCNTs increased with temperature. Crystallinity trends were shown to be independent of catalyst and catalyst concentration in all cases and only dependent on temperature. The average diameter for MWCNTs was shown to be dependent on temperature, choice of catalyst and catalyst concentration in all cases. Copyright © 2012 John Wiley & Sons, Ltd.     

Three component reactions of N‐nucleophiles and activated acetylenes with NH‐acids: A facile synthesis in water

A straightforward and efficient method for the synthesis of 1,2‐dihydroisoquinolines via a one‐pot, three‐component reaction of isoquinoline, activated acetylenes, and NH‐acids in water at 70°C without using any catalyst is reported. The method offers several advantages including high yields of products and an easy workup procedure. J. Heterocyclic Chem., (2012).     

CuBr/proline‐catalyzed cross‐coupling of unactivated benzene with aryl halides

Direct C? H arylation of unactivated benzene with aryl halides was achieved using a readily available copper catalyst. The reaction was carried out at 80 °C, using CuBr as catalyst, proline as ligand and t‐BuOK as base. This radical cross‐coupling reaction between unactivated benzene and aryl iodides proceeds via homolytic aromatic substitution and offers an efficient method for the synthesis of various biaryls in good to excellent yields. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of ϵ‐Caprolactam from Cyclohexanone Oxime Using Zeolites Hβ, HZSM‐5, and Alumina Pillared Montmorillonite

The Beckmann rearrangement of cyclohexanone oxime (CHO) to ?‐caprolactam (?‐C) was studied in a plug flow reactor at 300–400°C under atmospheric pressure by using Hβ, ZSM‐5, and alumina pillared montmorillonite. With Hβ(X) Y zeolites, raising the SiO₂/Al₂O₃ molar ratio (X) results in the enhancement of catalyst acid strength with concomitant decrease of the total acid amount. In creasing the calcination temperature (Y) causes remarkable diminution of catalyst surface area, acid strength, and acid amount. A similar trend was found for AlPMY catalysts. In there action of CHO, the initial catalytic activity correlates well with the total acid amount of various catalysts except for Hβ(10) Y (Y > 600°C). The reaction proceeds on both Brönsted and Lewis acid sites and the catalyst deactivation most likely occurs at the strong Brönsted acid sites. The effect of solvents in the feed on the catalytic results was also investigated; it was found that polar solvents such as ethanol or n‐butanol give high ?‐C yield and longer catalyst life time. In the reaction of CHO/C₂H₅OH over Hβ(10)800 at 400°C and W/F 74.6 gh/mol, the CHO conversion and ?‐C yield remain 100% and 92%, respectively, for at least 20 h time‐on‐stream. The reaction paths and the mechanism for ?‐C formation are proposed.     

Synthesis of α‐Aminonitriles and 5‐Substituted 1H‐Tetrazoles Using an Efficient Nanocatalyst of Fe3O4@SiO2–APTES‐supported Trifluoroacetic Acid

Fe₃O₄@SiO₂–APTES‐supported trifluoroacetic acid nanocatalyst was used for the one‐pot synthesis of α‐aminonitriles via a three‐component reaction of aldehydes (or ketones), amines, and sodium cyanide. This method produced a high yield of 75–96% using only a small amount of the catalyst (0.05 g) in EtOH at room temperature. The catalyst was also employed for the synthesis of 5‐substituted 1H‐tetrazoles from nitriles and sodium azide in EtOH at 80°C. The tetrazoles were produced with good‐to‐excellent yields in a short reaction time of 4 h. Both synthetic methods were carried out in the absence of an organic volatile solvent. Because the supported trifluoroacetic acid generated a solid acid on the surface, thus the acid corrosiveness was not a serious challenge. This heterogeneous nanocatalyst was magnetically recovered and reused several times without significant loss of catalytic activity.     

New Transformation of 1,3‐Oxathiolane‐2‐thione into 1,3‐Dithiolan‐2‐one via Polymerization and Depolymerization

This article deals with the cationic and anionic depolymerization of polydithiocarbonate, which was synthesized by cationic polymerization of 5‐phenoxymethyl‐1,3‐oxathiolane‐2‐thione ( 1 ) using methyl triflate as the initiator. The cationic depolymerization of the obtained polymer was carried out in the presence of 5–20 mol‐% of methyl triflate or triflic acid catalyst in chlorobenzene at 60 °C for 96 h to afford 4‐phenoxymethyl‐1,3‐dithiolan‐2‐one ( 2 ) in 35–83% yield. The anionic depolymerization of the polymer was carried out in the presence of 5 mol‐% of triethylamine or potassium tert‐butoxide at 20 °C for 24 h to afford 2 in 85–100% yield.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

1‐Butyl‐3‐methylimidazolium Hydrogen Sulfate [Bmim]HSO4: An Efficient Reusable Acidic Ionic Liquid for the Synthesis of 1,8‐Dioxo‐Octahydroxanthenes

1‐Butyl‐3‐methylimidazolium hydrogen sulfate [bmim]HSO₄ as an acidic ionic liquid was prepared and used as a catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthenes in excellent yields and short reaction times at 80 °C. The ionic liquid was easily separated from the reaction mixture by water extraction and was recycled four times without any loss in activity.     

Binder Free Modification of Glassy Carbon Electrode by Employing Reduced Graphene Oxide/ZnO Composite for Voltammetric Determination of Certain Nitroaromatics

Reduced Graphene oxide/ZnO nanoflowers ( rGO/ZnO‐NFs ) composite has been synthesized in‐situ using asymmetric Zn complex ( 1 ) as a single‐source molecular precursor (SSMP) with GO at 150 °C. The rGO/ZnO‐NFs composite was characterized by PXRD, UV‐vis, SEM, EDX mapping, TEM and SAED pattern to confirm its purity and morphology. The rGO/ZnO‐NFs composite shows uniform distribution of nanoflowers on graphene sheets. The modified glassy carbon electrode ( GCE ) was fabricated by drop wise layering of the rGO/ZnO‐NFs composite at the surface of the GCE without using binder. The binder free modified electrode ( GCE‐rGO/ZnO ) was explored for detection of nitroaromatics such as p‐nitro‐phenol ( p ‐NP ), 2,4‐dinitrophenol ( 2,4‐DNP ), 2,4‐dinitrotoluene ( 2,4‐DNT ) and 2,4,6‐trinitrophenol ( 2,4,6‐TNP ). The fabricated sensor showed remarkable response for the both toxicants and explosives. The LOD, sensitivity and linear range for the studied toxicants and explosives were found to be in a good range: p ‐NP= 0.93 μM, 240 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4‐DNP= 6.2 μM, 203 μA mM⁻¹ cm⁻² and 0.1–0.9 mM; 2,4‐DNT= 10 μM, 371 μA mM⁻¹ cm⁻² and 0.2–0.9 mM; 2,4,6‐TNP= 16 μM, 514 μA mM⁻¹ cm⁻² and 0.2–0.9 mM, respectively.     

Facilely Tuning Porous NiCo2O4 Nanosheets with Metal Valence‐State Alteration and Abundant Oxygen Vacancies as Robust Electrocatalysts Towards Water Splitting

Great efforts in developing clean electrochemical water splitting technology leads to the rational design and synthesis of highly efficient oxygen evolution reaction (OER) catalysts with low overpotential and fast reaction kinetics. Herein, we focus on the role that morphology and composition play in the OER performance to rationally design freestanding 3D porous NiCo₂O₄ nanosheets with metal valence states alteration and abundant oxygen vacancies as robust electrocatalysts towards water splitting. Besides metal valence‐state alteration, surface modification regarding the evolution of oxygen vacancies is facilely realized upon the sodium borohydride treatment, which is beneficial for the enhanced OER performance. Taking advantage of the porous nanostructures and abundant surface activity sites with high reactivity, the resultant nanostructures exhibit excellent OER activity and stability in alkaline electrolytes that outperform that of pristine NiCo₂O₄ and commercial RuO₂, thus holding great potential for the water splitting.     

Synthesis,characterization, and thermal stability of poly (lactic acid)/zinc oxide pillared organic saponite nanocomposites via ring‐opening polymerization of d,l‐lactide

Poly (lactic acid) (PLA) was synthesized using d , l ‐lactide monomer and zinc oxide (ZnO) pillared organic saponite as the green catalyst, through ring‐opening polymerization. The effects of stoichiometry of catalyst and polymerization conditions on molecular weight of PLA were evaluated by orthogonal experiment. The optimum polymerization parameters were: 0.5 wt% ZnO pillared organic saponite and reaction conditions of 170°C for 20 hr. Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy confirmed the PLA structure. Gel permeation chromatography showed that the average molecular weight of PLA was 48,442 g/mol, and its polydispersity index was 1.875. Differential scanning calorimetry, X‐ray diffraction, and polarized optical microscopy showed that ZnO pillared organic saponite improved the crystallinity of PLA. Thermal gravimetric analysis showed improved thermal stability of PLA because of ZnO pillared organic saponite. Thermal decomposition kinetics of PLA/ZnO pillared organic saponite nanocomposites was also studied. The activation energies (E_a) for thermal degradation of PLA and PLA/ZnO pillared organic saponite nanocomposites were evaluated by the Kissinger and Ozawa methods, which demonstrated that ZnO pillared organic saponite enhanced E_a of thermal degradation of PLA and significantly improved its thermal stability. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and Characterization of Transparent and UV‐Shielding Epoxy/SR‐494/APTMS/ZnO Nanocomposites with High Heat Resistance and Anti‐Static Properties

This research is to develop transparent and UV‐shielding Epoxy/SR‐494/APTMS/ZnO nanocomposite materials with high heat resistant and anti‐static properties. Firstly, the APTMS (3‐(acryloxypropyl)trimethoxysilane) performs the silanol intermediates by hydrolysis in pH 4～5 acid solution. The inorganic anti‐static fillers of powder ZnO can be successfully coupled and crosslinked to Epoxy/SR‐494 organic matrixes with these silanols of APTMS coupling agents. The remained active ‐OH functional groups of the APTMS/ZnO complexes can network bonding with epoxy prepolymers. Therefore, the Epoxy/APTMS/ZnO complexes with good anti‐static composites will be successfully prepared. Finally, in order to improve the thermal resistant and mechanical properties, the polyfunctionalized SR‐494 (pentaery‐thritol tetracrylate) acrylate monomers and the Epoxy/APTMS/ZnO composites are chain polymerized to form an excellent cross‐linking structure of organic/inorganic nanocomposites. The chemical bonding formation and the best weight contents of reaction components are identified by FT‐IR spectra. The thermal resistance, transparence, surface electric resistance, and hardness of these nanocomposites are measured by TGA, DSC, UV‐Visible, surface resistant meter, and pencil hardness tester respectively. Experimental results show that these nanocomposites have 90% transmittance and the best Td value is 389.3 °C which is 109.0 °C and 78.6 °C higher than those of pure epoxy resin and pure SR‐494 acrylate resin respectively. The glass transition temperature is not detected below 200 °C. The surface electric resistances of Epoxy/SR‐494/APTMS/ZnO hybrid thin films are decreased from 3.14 × 10¹³ to 5.13 × 10⁷ Ω/cm². The hardness of these nanocomposites is as high as 8H, and those hybrid films have high UV‐shielding properties. The morphology structures of the hybrid thin films are estimated by SEM. The results show that the optical thin films are evenly distributed with inorganic colloidal particles and the average particle size of these nanocomposites is 45～80 nm, while the powder ZnO (particle size: 2～5 μm) was used as inorganic filler.     

Synthesis of pyrano[2,3‐c]pyrazole derivatives using Fe3O4@SiO2@piperidinium benzene‐1,3‐disulfonate (Fe3O4@SiO2 nanoparticle‐supported IL) as a novel,green and heterogeneous catalyst

A simple, green and efficient protocol for the one‐pot four‐component synthesis of pyrano[2,3‐c ]pyrazole derivatives produced from reaction between aryl aldehydes, ethyl acetoacetate, malononitrile and hydrazine hydrate in the presence of nano magnetic piperidinium benzene‐1,3‐disulfonate was synthesized in water at 60 °C. The Fe₃O₄@SiO₂ nanoparticle‐supported IL was designed and synthesized. The present process offers advantages such as clean reaction, short reaction time, good to excellent yield, easy purification and easy recoverable catalyst.     

Enhanced Photocatalytic Performance of ZnO Nanorods Coupled by Two‐Dimensional α‐MoO3 Nanoflakes under UV and Visible Light Irradiation

We exploit the utilization of two‐dimensional (2D) molybdenum oxide nanoflakes as a co‐catalyst for ZnO nanorods (NRs) to enhance their photocatalytic performance. The 2D nanoflakes of orthorhombic α‐MoO₃ were synthesized through a sonication‐aided exfoliation technique. The 2D MoO₃ nanoflakes can be further converted to substoichiometric quasi‐metallic MoO_3?x by using UV irradiation. Subsequently, 1D–2D MoO₃/ZnO NR and MoO_3?x/ZnO NR composite photocatalysts have been successfully synthesized. The photocatalytic performances of the novel nanosystems in the decomposition of methylene blue are studied by using UV‐ and visible‐illumination setup. The incorporated 2D nanoflakes show a positive influence on the photocatalytic activity of the ZnO. The obtained rate constant values follow the order of pristine ZnO NR<MoO₃/ZnO NR<MoO_3?x/ZnO NR composites. The enhancement of the photocatalytic efficiency can be ascribed to a fast charge carrier separation and transport within the heterojunctions of the MoO₃/ZnO NRs. In particular, the best photocatalytic performance of the MoO_3?x/ZnO NR composite can be additionally attributed to a quasi‐metallic conductivity and substoichiometry‐induced mid‐gap states, which extend the light absorption range. A tentative photocatalytic degradation mechanism was proposed. The strategy presented in this work not only demonstrates that coupling with nanoscale molybdenum oxide nanoflakes is a promising approach to significantly enhance the photocatalytic activity of ZnO but also hints at new type of composite catalyst with extended applications in energy conversion and environmental purification.     

Synthesis of novel diene polymer via friedel–crafts‐type reaction of polybutadiene with aromatic compounds

This study describes a novel and facile synthesis strategy for a styrene‐butadiene rubber (SBR)‐like polymer via Friedel–Crafts‐type reaction between aromatic compounds and polybutadiene using an aluminum chloride as a catalyst. Although gelation was induced by a reaction of a generated carbocation with olefins in other polybutadiene chains in benzene and toluene because of their low electron densities on their rings, anisole with a higher electron density reacted with the polybutadiene carbocation efficiently. The introduction ratio of anisole increased as the reaction proceeded, and the obtained polymer, BRAN polymer, contained 15% anisoles for olefins in the polybutadiene in 4 h at 80 °C as estimated by ¹H NMR analysis. The glass‐transition temperature (T_g) of the BRAN polymer also increased with anisole content (T_g ~?50 °C when anisole contents 20%). The vulcanizate containing the BRAN polymer showed higher mechanical properties compared to samples using other matrix polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 841–847     

Pd/Zn/C-N催化CO2加氢合成甲醇性能研究

利用Zn2+和2-甲基咪唑自组装形成的ZIF-8, 800℃N2氮气气氛下焙烧得到Zn/C-N载体.采用NaBH4还原法将不同含量Pd负载于Zn/C-N上焙烧后得到Pd/Zn/C-N催化剂, ICP测得Pd实际负载量为0.02%、0.05%、0.1%、0.3%.负载Pd后,由于Pd氢溢流作用, ZnO表面还原温度降低,氧空穴增加,更有利于CO2解离吸附,因此Pd负载量越高,催化剂CO2转化率越高.甲醇选择性受Pd纳米颗粒大小显著影响,小颗粒Pd与ZnO相互作用更强,更有利于甲醇生成,其中0.02%Pd/Zn/C-N催化剂在275℃, 2 MPa反应条件下, Pd/g上甲醇时空收率最高, STYMeOH值为11.0 mol/(g Pd·h).