Trisulfide‐Bond Acenes for Organic Batteries

The molecular design of organic battery electrodes is a big challenge. Here, we synthesize two metal‐free organosulfur acenes and shed insight into battery properties using first‐principles calculations. A new zone‐melting chemical‐vapor‐transport (ZM‐CVT) apparatus was fabricated to provide a simple, solvent‐free, and continuous synthetic protocol, and produce single crystals of tetrathiotetracene (TTT) and hexathiapentacene (HTP) at a large scale. Single crystals of HTP showed better Li‐ion battery performance and higher cycling stability than those of TTT. A two‐step, three‐electron lithiation mechanism instead of the commonly depicted two‐electron mechanism is proposed for the HTP Li‐ion battery. The superior performance of HTP is linked to unique trisulfide bonding scenarios, which are also responsible for the formation of empty channels along the stacking direction. In‐depth theoretical analysis suggests that organosulfur acenes are potential prototypes for organic battery materials with tunable properties, and that the tuning of sulfur bonds is critical in designing these new materials.     

Organic Thiocarboxylate Electrodes for a Room‐Temperature Sodium‐Ion Battery Delivering an Ultrahigh Capacity

Organic room‐temperature sodium‐ion battery electrodes with carboxylate and carbonyl groups have been widely studied. Herein, for the first time, we report a family of sodium‐ion battery electrodes obtained by replacing stepwise the oxygen atoms with sulfur atoms in the carboxylate groups of sodium terephthalate which improves electron delocalization, electrical conductivity and sodium uptake capacity. The versatile strategy based on molecular engineering greatly enhances the specific capacity of organic electrodes with the same carbon scaffold. By introducing two sulfur atoms to a single carboxylate scaffold, the molecular solid reaches a reversible capacity of 466 mAh g⁻¹ at a current density of 50 mA g⁻¹. When four sulfur atoms are introduced, the capacity increases to 567 mAh g⁻¹ at a current density of 50 mA g⁻¹, which is the highest capacity value reported for organic sodium‐ion battery anodes until now.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High‐Energy Sodium‐Ion Batteries

Although sodium‐ion batteries (SIBs) are considered as alternatives to lithium‐ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8‐tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox‐active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

A Bipolar and Self‐Polymerized Phthalocyanine Complex for Fast and Tunable Energy Storage in Dual‐Ion Batteries

Bipolar redox organics have attracted interest as electrode materials for energy storage owing to their flexibility, sustainability and environmental friendliness. However, an understanding of their application in all‐organic batteries, let alone dual‐ion batteries (DIBs), is in its infancy. Herein, we propose a strategy to screen a variety of phthalocyanine‐based bipolar organics. The self‐polymerizable bipolar Cu tetraaminephthalocyanine (CuTAPc) shows multifunctional applications in various energy storage systems, including lithium‐based DIBs using CuTAPc as the cathode material, graphite‐based DIBs using CuTAPc as the anode material and symmetric DIBs using CuTAPc as both the cathode and anode materials. Notably, in lithium‐based DIBs, the use of CuTAPc as the cathode material results in a high discharge capacity of 236 mAh g^?1 at 50 mA g^?1 and a high reversible capacity of 74.3 mAh g^?1 after 4000 cycles at 4 A g^?1. Most importantly, a high energy density of 239 Wh kg^?1 and power density of 11.5 kW kg^?1 can be obtained in all‐organic symmetric DIBs.     

Lithium Azide as an Electrolyte Additive for All‐Solid‐State Lithium–Sulfur Batteries

Of the various beyond‐lithium‐ion battery technologies, lithium–sulfur (Li–S) batteries have an appealing theoretical energy density and are being intensely investigated as next‐generation rechargeable lithium‐metal batteries. However, the stability of the lithium‐metal (Li°) anode is among the most urgent challenges that need to be addressed to ensure the long‐term stability of Li–S batteries. Herein, we report lithium azide (LiN₃) as a novel electrolyte additive for all‐solid‐state Li–S batteries (ASSLSBs). It results in the formation of a thin, compact and highly conductive passivation layer on the Li° anode, thereby avoiding dendrite formation, and polysulfide shuttling. It greatly enhances the cycling performance, Coulombic and energy efficiencies of ASSLSBs, outperforming the state‐of‐the‐art additive lithium nitrate (LiNO₃).     

Halide‐Based Materials and Chemistry for Rechargeable Batteries

Rechargeable batteries are considered one of the most effective energy storage technologies to bridge the production and consumption of renewable energy. The further development of rechargeable batteries with characteristics such as high energy density, low cost, safety, and a long cycle life is required to meet the ever‐increasing energy‐storage demands. This Review highlights the progress achieved with halide‐based materials in rechargeable batteries, including the use of halide electrodes, bulk and/or surface halogen‐doping of electrodes, electrolyte design, and additives that enable fast ion shuttling and stable electrode/electrolyte interfaces, as well as realization of new battery chemistry. Battery chemistry based on monovalent cation, multivalent cation, anion, and dual‐ion transfer is covered. This Review aims to promote the understanding of halide‐based materials to stimulate further research and development in the area of high‐performance rechargeable batteries. It also offers a perspective on the exploration of new materials and systems for electrochemical energy storage.     

Biredox Eutectic Electrolytes Derived from Organic Redox‐Active Molecules: High‐Energy Storage Systems

One promising candidate for high‐energy storage systems is the nonaqueous redox flow battery (NARFB). However, their application is limited by low solubility of redox‐active materials and poor performance at high current density. Reported here is a new strategy, a biredox eutectic, as the sole electrolyte for NARFB to achieve a significantly higher concentration of redox‐active materials and enhance the cell performance. Without other auxiliary solvents, the biredox eutectic electrolyte is formed directly by the molecular interactions between two different redox‐active molecules. Such a unique electrolyte possesses high concentration with low viscosity (3.5 m , for N‐butylphthalimide and 1,1‐dimethylferrocene system) and a relatively high working voltage of 1.8 V, enabling high capacity and energy density of NARFB. The resulting high‐performance NARFB demonstrates that the biredox eutectic based strategy is potentially promising for low‐cost and high‐energy storage systems.     

An Intrinsic Flame‐Retardant Organic Electrolyte for Safe Lithium‐Sulfur Batteries

Safety concerns pose a significant challenge for the large‐scale employment of lithium–sulfur batteries. Extremely flammable conventional electrolytes and dendritic lithium deposition cause severe safety issues. Now, an intrinsic flame‐retardant (IFR) electrolyte is presented consisting of 1.1 m lithium bis(fluorosulfonyl)imide in a solvent mixture of flame‐retardant triethyl phosphate and high flashpoint solvent 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyl (1:3, v/v) for safe lithium–sulfur (Li?S) batteries. This electrolyte exhibits favorable flame‐retardant properties and high reversibility of the lithium metal anode (Coulombic efficiency >99 %). This IFR electrolyte enables stable lithium plating/stripping behavior with micro‐sized and dense‐packing lithium deposition at high temperatures. When coupled with a sulfurized pyrolyzed poly(acrylonitrile) cathode, Li?S batteries deliver a high composite capacity (840.1 mAh g^?1) and high sulfur utilization of 95.6 %.     

Effects of Bithiophene Imide Fusion on the Device Performance of Organic Thin‐Film Transistors and All‐Polymer Solar Cells

Two new bithiophene imide (BTI)‐based n‐type polymers were synthesized. f‐BTI2‐FT based on a fused BTI dimer showed a smaller band gap, a lower LUMO, and higher crystallinity than s‐BTI2‐FT containing a BTI dimer connected through a single bond. s‐BTI2‐FT exhibited a remarkable electron mobility of 0.82 cm² V⁻¹ s⁻¹, and f‐BTI2‐FT showed a further improved mobility of 1.13 cm² V⁻¹ s⁻¹ in transistors. When blended with the polymer donor PTB7‐Th, f‐BTI2‐FT‐based all‐polymer solar cells (all‐PSCs) attained a PCE of 6.85 %, the highest value for an all‐PSC not based on naphthalene (or perylene) diimide polymer acceptors. However, s‐BTI2‐FT all‐PSCs showed nearly no photovoltaic effect. The results demonstrate that f‐BTI2‐FT is one of most promising n‐type polymers and that ring fusion offers an effective approach for designing polymers with improved electrical properties.     

Tactile UV‐ and Solar‐Light Multi‐Sensing Rechargeable Batteries with Smart Self‐Conditioned Charge and Discharge

A tactile, UV‐ and solar‐light multi‐sensing smart rechargeable Zn–air battery (SRZAB) with excellent cell performance, self‐conditioned charge/discharge, and reliable environmental responsivity is made by using multi‐scale conjugated block‐copolymer–carbon nanotube–polyurethane foam assemblies as both a self‐standing air electrode and a sensing unit. Multiscale engineering fully exploits the multi‐synergy among components to endow the newly designed metal‐free multi‐sensing air electrode (MSAE) with bifunctional oxygen reduction and evolution activities, pressure sensitivity, and photothermal and photoelectric conversion functions in a single electrode, enabling effective regulation of interface properties, electronic/ionic transport, or redox reactions in SRZAB upon various stimulations and establishing multiple working principles. MSAE‐driven SRZAB can be used as compressible power sources, self‐powered pressure and optical sensors and light‐to‐electrochemical energy systems.     

Reversible S0/MgSx Redox Chemistry in a MgTFSI2/MgCl2/DME Electrolyte for Rechargeable Mg/S Batteries

The redox chemistry of magnesium and its application in rechargeable Mg batteries has received increasing attention owing to the unique benefits of Mg metal electrodes, namely high reversibility without dendrite formation, low reduction potentials, and high specific capacities. The Mg/S couple is of particular interest owing to its high energy density and low cost. Previous reports have confirmed the feasibility of a rechargeable Mg/S battery; however, only limited cycling stability was achieved, and the complicated procedure for the preparation of the electrolytes has significantly compromised the benefits of Mg/S chemistry and hindered the development of Mg/S batteries. Herein, we report the development of the first rechargeable Mg/S battery with a MgTFSI₂/MgCl₂/DME electrolyte (DME=1,2‐dimethoxyethane, TFSI=bis(trifluoromethanesulfonyl)imide) and realize the best cycling stability among all reported Mg/S batteries by suppressing polysulfide dissolution. Mechanistic studies show that the battery works via S⁰/MgS_x redox processes and that the large voltage hysteresis is mainly due to the Mg anode overpotential.     

4.5 V High‐Voltage Rechargeable Batteries Enabled by the Reduction of Polarization on the Lithium Metal Anode

Lithium metal is used to achieve high‐energy‐density batteries due to its large theoretical capacity and low negative electrochemical potential. The introduction of quasi‐solid electrolytes simultaneously overcomes the safety problems induced by the liquid electrolytes and the high interfacial resistance issues confronted by all solid‐state electrolytes. In‐depth investigations involving interfacial behaviors in quasi‐solid lithium metal batteries are inadequate. Herein an ultrathin Li₃OCl quasi‐solid‐state electrolyte layer (500 nm thickness) is used to cover a lithium anode. The polarization of the anode is remarkably reduced by introducing the Li₃OCl quasi‐solid‐state electrolyte. In contrast to the decomposition of solvents in a standard electrolyte (EC‐DEC,1.0 m LiPF₆), the established quasi‐solid‐state electrolyte interfaces can significantly inhibit the decomposition of solvents when the cut‐off voltage is 4.5 V.     

Biological Nicotinamide Cofactor as a Redox‐Active Motif for Reversible Electrochemical Energy Storage

Nicotinamide adenine dinucleotide (NAD⁺) is one of the most well‐known redox cofactors carrying electrons. Now, it is reported that the intrinsically charged NAD⁺ motif can serve as an active electrode in electrochemical lithium cells. By anchoring the NAD⁺ motif by the anion incorporation, redox activity of the NAD⁺ is successfully implemented in conventional batteries, exhibiting the average voltage of 2.3 V. The operating voltage and capacity are tunable by altering the anchoring anion species without modifying the redox center itself. This work not only demonstrates the redox capability of NAD⁺, but also suggests that anchoring the charged molecules with anion incorporation is a viable new approach to exploit various charged biological cofactors in rechargeable battery systems.     

Electrochromic Poly(chalcogenoviologen)s as Anode Materials for High‐Performance Organic Radical Lithium‐Ion Batteries

A series of electrochromic electron‐accepting poly(chalcogenoviologen)s with multiple, stable, and reversible redox centers were used as anodic materials in organic radical lithium‐ion batteries (ORLIBs). The introduction of heavy atoms (S, Se, and Te) into the viologen scaffold significantly improved the capacity and cycling stability of the ORLIBs. Notably, the poly(Te‐BnV) anode was able to intercalate 20 Li ions and showed higher conductivity and insolubility in the electrolyte, thus contributing to a reversible capacity of 502 mAh g^?1 at 100 mA g^?1 when the Coulombic efficiency approached 100 %. The charged/discharged state of flexible electrochromic batteries fabricated from these anodic materials could be monitored visually owing to the unique electrochromic and redox properties of the materials. This study opens a promising avenue for the development of organic polymer‐based electrodes for flexible hybrid visual electronics.     

Germanium‐Based Nanomaterials for Rechargeable Batteries

Germanium‐based nanomaterials have emerged as important candidates for next‐generation energy‐storage devices owing to their unique chemical and physical properties. In this Review, we provide a review of the current state‐of‐the‐art in germanium‐based materials design, synthesis, processing, and application in battery technology. The most recent advances in the area of Ge‐based nanocomposite electrode materials and electrolytes for solid‐state batteries are summarized. The limitations of Ge‐based materials for energy‐storage applications are discussed, and potential research directions are also presented with an emphasis on commercial products and theoretical investigations.     

An Insoluble Benzoquinone‐Based Organic Cathode for Use in Rechargeable Lithium‐Ion Batteries

Application of organic electrode materials in rechargeable batteries has attracted great interest because such materials contain abundant carbon, hydrogen, and oxygen elements. However, organic electrodes are highly soluble in organic electrolytes. An organic electrode of 2,3,5,6‐tetraphthalimido‐1,4‐benzoquinone (TPB) is reported in which rigid groups coordinate to a molecular benzoquinone skeleton. The material is insoluble in aprotic electrolyte, and demonstrates a high capacity retention of 91.4 % (204 mA h g⁻¹) over 100 cycles at 0.2 C. The extended π‐conjugation of the material contributes to enhancement of the electrochemical performance (155 mA h g⁻¹ at 10 C). Moreover, density functional theory calculations suggest that favorable synergistic reactions between multiple carbonyl groups and lithium ions can enhance the initial lithium ion intercalation potential. The described approach may provide a novel entry to next‐generation organic electrode materials with relevance to lithium‐ion batteries.