High-performance bulk heterojunction-based photocathode with facile architecture for photoelectrochemical water splitting

Organic semiconductors are promising candidates as photoactive layers for photoelectrodes used in photoelectrochemical (PEC) cells due to their excellent light absorption and efficient charge transport properties with the help of interfacial materials. However, the use of multilayers will make the charge transfer mechanism more complicated and decrease the PEC performance of the photoelectrode caused by the increased contact resistance. In this work, a PM6:Y6 bulk heterojunction (BHJ)-based photocathode is fabricated for efficient PEC hydrogen evolution reaction (HER) in an acidic aqueous solution. With RuO₂ as an interfacial modification layer, the photocathode with a simple structure (fluorine-doped tin oxide (FTO)/PM6:Y6/RuO₂) generates a maximum photocurrent density up to ?15 mA/cm² at 0 V vs. reference hydrogen electrode (RHE), outperforming all previously reported BHJ-based photocathodes in terms of PEC performance. The highest ratiometric power-saved efficiency of 3.7% is achieved at 0.4 V vs. RHE.     

Photoanodic and photocathodic behaviour of La5Ti2CuS5O7 electrodes in the water splitting reaction

The particulate semiconductor La₅Ti₂CuS₅O₇ (LTC) with a band gap energy of 1.9 eV functioned as either a photocathode or a photoanode when embedded onto Au or Ti metal layers, respectively. By applying an LTC/Au photocathode and LTC/Ti photoanode to, respectively, photoelectrochemical (PEC) water reduction and oxidation concurrently, zero-bias overall water splitting was accomplished under visible light irradiation. The band structures of LTC/Au and LTC/Ti calculated using a semiconductor device simulator (AFORS-HET) confirmed the critical role of the solid/solid junction of the metal back contact in the charge separation and PEC properties of LTC photoelectrodes. The prominently long lifetime of photoexcited charge carriers in LTC, confirmed by transient absorption spectroscopy, allowed the utilization of both photoexcited electrons and holes depending on the band structure at the solid/solid junction.     

非晶TiO2修饰CuBi2O4光阴极增强其光电化学产氢活性

光催化作为太阳能利用领域的研究热点引起了广泛的关注.其中,光电化学技术能够通过分解水提供清洁的氢能源,因此被认为是一种潜在的新能源制造方式.在光电化学分解水产氢的过程中,最重要的是高效光电极的制备.一系列n型半导体材料已被广泛地报道并用作光阳极,如BiVO4,ZnO,Fe2O3等.然而对于光阴极材料,其可选择性则较少.CuBi2O4是一种天然矿物,具有廉价易得以及化学性质稳定的特性,而且是一种p型半导体材料,因此能够用于制备光阴极;另外因为其强的可见光响应(1.70 eV),所以具有广泛的应用前景.目前对于CuBi2O4光阴极研究主要集中在合成和理论计算方面,而对于如何促进界面处的载流子分离研究较少.本文通过一种简单的电沉积方法成功制备出CuBi2O4光阴极,然后利用非晶TiO2和助催化剂Pt进行修饰后将其用于光电化学产氢.由于形成了CuBi2O4/TiO2 p-n结,因此其光阴极活性得到增强.新的Pt/TiO2/CuBi2O4光阴极在0.60 V偏压处的光电流为0.35 mA/cm2,其数值约为Pt/CuBi2O4光阴极的两倍.XRD结果表明,我们制备的CuBi2O4为纯相且结晶性较好,其表面修饰的TiO2为非晶相的.SEM结果表明,CuBi2O4电极层由100-150 nm的颗粒构成.紫外-可见吸收光谱表明,制备的CuBi2O4光电极拥有良好的可见光吸收性质,而且TiO2修饰未对CuBi2O4的光吸收产生明显的影响.XPS结果表明,修饰TiO2并未对CuBi2O4电极造成成分上的破坏.光电化学测试表明,修饰TiO2层厚度和结晶性会影响光电极的最终活性.修饰四层TiO2和退火200 oC的样品具有最好的活性.另外稳定性测试也表明,修饰非晶TiO2的CuBi2O4光阴极具有良好的稳定性.在IPCE测试中,Pt/TiO2/CuBi2O4光阴极在其光响应范围内均比Pt/CuBi2O4光阴极表现出更高的效率.阻抗结果测试中Pt/TiO2/CuBi2O4光阴极具有更小的阻抗,这表明其载流子传输更加高效.在Mott-Shetty测试中,Pt/TiO2/CuBi2O4和Pt/CuBi2O4光阴极都表现出p型半导体性质,但是Pt/TiO2/CuBi2O4具有更负的平带电位,这表明修饰的TiO2仍具有n型半导体材料的特性,并与p型的CuBi2O4形成p-n结,从而促进了载流子分离效率.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Understanding the Roles of Oxygen Vacancies in Hematite‐Based Photoelectrochemical Processes

Oxygen vacancy (V_O) engineering is an effective method to tune the photoelectrochemical (PEC) performance, but the influence of V_O on photoelectrodes is not well understood. Using hematite as a prototype, we herein report that V_O functions in a more complicated way in PEC process than previously reported. Through a comprehensive analysis of the key charge transfer and surface reaction steps in PEC processes on a hematite photoanode, we clarify that V_O can facilitate surface electrocatalytic processes while leading to severe interfacial recombination at the semiconductor/electrolyte (S‐E) interface, in addition to the well‐reported improvements in bulk conductivity. The improved bulk conductivity and surface catalysis are beneficial for bulk charge transfer and surface charge consumption while interfacial charge transfer deteriorates because of recombination through V_O‐induced trap states at the S‐E interface.     

Near infrared-driven photoelectrochemical water splitting: Review and future prospects

Photoelectrochemical (PEC) water splitting supplies an environmentally friendly, sustainable approach to generating renewable hydrogen fuels. Oxides semiconductors, e.g. TiO₂, BiVO₄, and Fe₂O₃, have been widely developed as photoelectrodes to demonstrate the utility in PEC systems. Even though significant effort has been made to increase the PEC efficiency, these materials are still far from practical applications. The main issue of metal oxides is the wide bandgap energy that hinders effective photons harvesting from sunlight. In solar spectrum, over 40% of the energy is located in the near-infrared (NIR) region. Developing sophisticated PEC systems that can be driven by NIR illumination is therefore essential. This review gives a concise overview on PEC systems based on the use of NIR-driven photoelectrodes. Promising candidates as efficient yet practical NIR-responsive photoelectrodes are suggested and discussed. Future outlooks on the advancement of PEC water splitting are also proposed.     

Cu3N保护壳层稳定CuO光阴极

氧化铜是一种有潜力的光电催化分解水用光阴极材料,但由于其在光电催化分解水过程中会发生严重的光腐蚀,限制了其实际应用.因此,构建有效的保护壳层抑制氧化铜光腐蚀,具有重要意义.虽然原子层沉积技术已成为构建光阴极保护层的主流手段,但由于制造成本高昂,难以满足未来实际应用对低成本和规模化的要求,因此,亟需发展简易、低廉的保护壳...     

Strain tuned efficient heterostructure photoelectrodes

van der Waals（vd Ws） heterostructures based on two-dimensional（2D） materials have become a promising candidate for photoelectrochemical（PEC） catalyst not only because of the freedom in materials design that enable the band-offset construction and facilitate the charge separation. They also provide a platform for the study of various of interface effect in PEC. Here, we report a new kind of mixed-dimensional vd Ws heterostructure photoelectrode and investigate the strain enhanced PEC performance ...     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Doping‐Induced Amorphization,Vacancy, and Gradient Energy Band in SnS2 Nanosheet Arrays for Improved Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is a promising strategy to convert solar energy into hydrogen fuel. However, the poor bulk charge‐separation ability and slow surface oxygen evolution reaction (OER) dynamics of photoelectrodes impede the performance. We construct In‐ and Zn/In‐doped SnS₂ nanosheet arrays through a hydrothermal method. The doping induces the simultaneous formation of an amorphous layer, S vacancies, and a gradient energy band. This leads to elevated carrier concentrations, an increased number of surface‐reaction sites, accelerated surface‐OER kinetics, and an enhanced bulk‐carrier separation efficiency with a decreased recombination rate. This efficient doping strategy allows to manipulate the morphology, crystallinity, and band structure of photoelectrodes for an improved PEC performance.     

Metal-Organic Framework Glass Catalysts from Melting Glass-Forming Cobalt-Based Zeolitic Imidazolate Framework for Boosting Photoelectrochemical Water Oxidation

Sluggish oxygen evolution kinetics and serious charge recombination restrict the development of photoelectrochemical (PEC) water splitting. The advancement of novel metal–organic frameworks (MOFs) catalysts bears practical significance for improving PEC water splitting performance. Herein, a MOF glass catalyst through melting glass-forming cobalt-based zeolitic imidazolate framework (Co-a_gZIF-62) was introduced on various metal oxide (MO: Fe₂O₃, WO₃ and BiVO₄) semiconductor substrates coupled with NiO hole transport layer, constructing the integrated Co-a_gZIF-62/NiO/MO photoanodes. Owing to the excellent conductivity, stability and open active sites of MOF glass, Co-a_gZIF-62/NiO/MO photoanodes exhibit a significantly enhanced photoelectrochemical water oxidation activity and stability in comparison to pristine MO photoanodes. From experimental analyses and density functional theory calculations, Co-a_gZIF-62 can effectively promote charge transfer and separation, improve carrier mobility, accelerate the kinetics of oxygen evolution reaction (OER), and thus improve PEC performance. This MOF glass not only serves as an excellent OER cocatalyst on tunable photoelectrodes, but also enables promising opportunities for PEC devices for solar energy conversion.     

Dual Oxygen and Tungsten Vacancies on a WO3 Photoanode for Enhanced Water Oxidation

Alleviating charge recombination at the electrode/electrolyte interface by introducing an overlayer is considered an efficient approach to improve photoelectrochemical (PEC) water oxidation. A WO₃ overlayer with dual oxygen and tungsten vacancies was prepared by using a solution‐based reducing agent, LEDA (lithium dissolved in ethylenediamine), which improved the PEC performance of the mesoporous WO₃ photoanode dramatically. In comparison to the pristine samples, the interconnected WO₃ nanoparticles surrounded by a 2–2.5 nm thick overlayer exhibited a photocurrent density approximately 2.4 times higher and a marked cathodic shift of the onset potential, which is mainly attributed to the facilitative effect on interface charge transfer and the improved conductivity by enhanced charge carrier density. This simple and effective strategy may provide a new path to improve the PEC performance of other photoanodes.     

Self‐powered Photoelectrochemical Sensor for Gallic Acid Exploiting a CdSe/ZnS Core‐shell Quantum Dot Sensitized TiO2 as Photoanode

Herein is described the development of a self‐powered sensor for gallic acid (GA) determination exploiting CdSe/ZnS quantum dot sensitized TiO₂ nanoparticles (CdSe/ZnS/TiO₂/FTO) as photoanode and an all copper oxide photocathode (CuO/Cu₂O/FTO) to reduce water. A two‐chamber self‐powered photoelectrochemical cell was employed in order to maintain separated the photoelectrodes. The self‐powered photoelectrochemical cell is based on water reduction in the cathodic chamber while gallic acid acts as a hole scavenger in the anodic chamber to generate the necessary cell output to drive GA oxidation in the anodic compartment. Electrochemical impedance measurements were performed to evaluate the electronic characteristics of CdSe/ZnS/TiO₂/FTO photoanode and CuO/Cu₂O/FTO photocathode in terms of flat band potential, carrier density, and nature of semiconductor. Under optimized conditions, the self‐powered photoelectrochemical cell presented a wide linear response range for GA from 1 μmol L⁻¹ up to 200 μmol L⁻¹.     

Sonochemical synthesis,structural inspection and semiconductor behavior of three new nano sized Cu(II), Co(II) and Ni(II) chelates based on tri‐dentate NOO imine ligand as precursors for metal oxides

Three novel nanosized Cu(II), Co(II) and Ni(II) complexes of imine ligand attained from the condensation of 2‐amino‐3‐hydroxypyridine and 3‐methoxysalicylaldehyde have been prepared and investigated using diverse chemical methods such as NMR, CHN analysis, conductance, IR, Spectral studies, TGA and magnetic moment measurements. The obtained data confirmed that the synthesized complexes have metal: ligand ratio of 1:1 and octahedral geometry for Co(II) and Ni(II) complexes. Interestingly, The complexes are used as precursors for producing CuO, Co₂O₃ and NiO nanoparticles by calcination at 500 °C and their structures were described by powder x‐ray and transmittance electron microscopy. Furthermore, to investigate the feasibility of using the synthesized materials for semiconductor based nanodevices, the electrical properties of the prepared imine complexes and their corresponding metal oxides were investigated by measuring the electrical conductivity over a temperature range 373‐593 K. The data confirm that the materials are semiconductor. The electrical conduction process in the complexes is governed by intermolecular and intramolecular transfer of the charge carriers. But, the conduction mechanism arises from the contribution of the phonon‐assisted small polaron hopping in NiO nanoparticles and charge carrier hopping in CuO and Co₂O₃ nanoparticles. The results indicate that the complexes under study are promising candidates for wide scale of organic based semiconducting devices.     

Molecular Engineering of Conjugated Acetylenic Polymers for Efficient Cocatalyst‐free Photoelectrochemical Water Reduction

Conjugated polymers featuring tunable band gaps/positions and tailored active centers, are attractive photoelectrode materials for water splitting. However, their exploration falls far behind their inorganic counterparts. Herein, we demonstrate a molecular engineering strategy for the tailoring aromatic units of conjugated acetylenic polymers from benzene‐ to thiophene‐based. The polarized thiophene‐based monomers of conjugated acetylenic polymers can largely extend the light absorption and promote charge separation/transport. The C≡C bonds are activated for catalyzing water reduction. Using on‐surface Glaser polycondensation, as‐fabricated poly(2,5‐diethynylthieno[3,2‐b]thiophene) on commercial Cu foam exhibits a record H₂‐evolution photocurrent density of 370 μA cm^?2 at 0.3 V vs. reversible hydrogen electrode among current cocatalyst‐free organic photocathodes (1–100 μA cm^?2). This approach to modulate the optical, charge transfer, and catalytic properties of conjugated polymers paves a critical way toward high‐activity organic photoelectrodes.     

Copper Oxide-Based Photocatalysts and Photocathodes: Fundamentals and Recent Advances

This work aims at reviewing the most impactful results obtained on the development of Cu-based photocathodes. The need of a sustainable exploitation of renewable energy sources and the parallel request of reducing pollutant emissions in airborne streams and in waters call for new technologies based on the use of efficient, abundant, low-toxicity and low-cost materials. Photoelectrochemical devices that adopts abundant element-based photoelectrodes might respond to these requests being an enabling technology for the direct use of sunlight to the production of energy fuels form water electrolysis (H₂) and CO₂ reduction (to alcohols, light hydrocarbons), as well as for the degradation of pollutants. This review analyses the physical chemical properties of Cu₂O (and CuO) and the possible strategies to tune them (doping, lattice strain). Combining Cu with other elements in multinary oxides or in composite photoelectrodes is also discussed in detail. Finally, a short overview on the possible applications of these materials is presented.     

BiVO4/TiO2 core-shell heterostructure: wide range optical absorption and enhanced photoelectrochemical and photocatalytic performance

In the present study, pristine BiVO₄, TiO₂ and BiVO₄/TiO₂ core-shell heterostructured nanoparticles are prepared by hydrothermal methods and studied for structural, morphological, optical, photoelectrochemical water splitting and photocatalytic degradation of methylene blue as an organic pollutant. Both pristine BiVO₄ and TiO₂ exhibit poor PEC and PC performance under visible light illumination. However, an enhanced PEC and PC activity in BiVO₄/TiO₂ core-shell heterostructure is observed due to high solar energy absorption and superior charge separation properties in core-shell nanoparticles. The photoelectrode prepared using BiVO₄/TiO₂ core-shell nanoparticles exhibit a photocathode behavior and produced cathodic photocurrent, however, the pristine BiVO₄ and TiO₂ photoelectrodes act as photoanode and produced anodic photocurrent. This behavior of change in current direction is also observe in the Mott-Schottky analysis where the BiVO₄/TiO₂ core-shell nanoparticles photoelectrode exhibits the positive slow showing p-type semiconducting behavior. The change in cathodic photoresponse in core-shell nanoparticles in comparison to anodic photoresponse of BiVO₄ and TiO₂ nanoparticles is explained in terms of the variations in the work function values. These results highlight the advantages of core-shell nanoparticle of suitable materials for photocatalytic and photoelectrochemical applications.     

制备条件对Cu2S光阴极性能的影响

制备了Cu2S纳米材料,研究了制备条件对Cu2S形貌及催化多硫离子还原性能的影响,并将最优条件下制备的Cu2S作为光阴极应用在量子点敏化太阳能电池上.在Cu2S的制作过程中,盐酸对铜片的预处理及铜片和多硫化钠溶液的反应是影响Cu2S性能的两个重要过程.研究结果表明:得到的Cu2S为纳米片组成的花瓣状结构,且随着盐酸浓度的增大和处理时间的延长,表面逐渐变得粗糙和多孔,这有利于增加其表面积,因此Cu2S和多硫电解质之间的界面电荷转移电阻逐渐减小.另外,铜和多硫化钠溶液反应生成Cu2S是一个非常快的过程,反应时间不宜过长,否则Cu2S膜会断裂.在保证Cu2S具有良好催化性能的前提下优化得到的最经济省时的制备条件是:盐酸的浓度为30%,预处理时间为40min,和多硫化钠反应的时间为10s.用此条件下制备的Cu2S作为光阴极组装成量子点敏化太阳能电池达到了4.01%高的光电转化效率.     

Controllable Hydrocarbon Formation from the Electrochemical Reduction of CO2 over Cu Nanowire Arrays

In this work, the effect of Cu nanowire morphology on the selective electrocatalytic reduction of CO₂ is presented. Cu nanowire arrays were prepared through a two‐step synthesis of Cu(OH)₂ and CuO nanowire arrays on Cu foil substrates and a subsequent electrochemical reduction of the CuO nanowire arrays to Cu nanowire arrays. By this simple synthesis method, Cu nanowire array electrodes with different length and density were able to be controllably synthesized. We show that the selectivity for hydrocarbons (ethylene, n‐propanol, ethane, and ethanol) on Cu nanowire array electrodes at a fixed potential can be tuned by systematically altering the Cu nanowire length and density. The nanowire morphology effect is linked to the increased local pH in the Cu nanowire arrays and a reaction scheme detailing the local pH‐induced formation of C₂ products is also presented by a preferred CO dimerization pathway.     

Activation of α-Fe2O3 for Photoelectrochemical Water Splitting Strongly Enhanced by Low Temperature Annealing in Low Oxygen Containing Ambient

Photoelectrochemical (PEC) water splitting is a promising method for the conversion of solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite (α-Fe₂O₃) is one of the most attractive materials for a highly efficient charge carrier generation and collection due to its large specific surface area and the short minority carrier diffusion length. In the present work, the PEC water splitting performance of nanostructured α-Fe₂O₃ is investigated which was prepared by anodization followed by annealing in a low oxygen ambient (0.03 % O₂ in Ar). It was found that low oxygen annealing can activate a significant PEC response of α-Fe₂O₃ even at a low temperature of 400 °C and provide an excellent PEC performance compared with classic air annealing. The photocurrent of the α-Fe₂O₃ annealed in the low oxygen at 1.5 V vs. RHE results as 0.5 mA cm⁻², being 20 times higher than that of annealing in air. The obtained results show that the α-Fe₂O₃ annealed in low oxygen contains beneficial defects and promotes the transport of holes; it can be attributed to the improvement of conductivity due to the introduction of suitable oxygen vacancies in the α-Fe₂O₃. Additionally, we demonstrate the photocurrent of α-Fe₂O₃ annealed in low oxygen ambient can be further enhanced by Zn-Co LDH, which is a co-catalyst of oxygen evolution reaction. This indicates low oxygen annealing generates a promising method to obtain an excellent PEC water splitting performance from α-Fe₂O₃ photoanodes.