Cobalt(II) acetylacetonate complex immobilized on aminosilane‐modified SBA‐15 as an efficient catalyst for epoxidation of trans‐stilbene with molecular oxygen

From environmental and economic points of view, it is highly desirable to develop a clean and efficient catalytic process to produce epoxides. An attractive approach is to use a solid, recyclable catalyst and molecular oxygen as the oxidant without any sacrificial reductant or other additives. Nonetheless, the catalysts reported up to now still cannot balance catalytic activity with epoxide selectivity. It is of great importance to explore novel catalysts with both high activity and selectivity for the epoxidation of olefins. In this work, cobalt(II) acetylacetonate (Co(acac)₂) was covalently bonded to the silica surface of SBA‐15 molecular sieve by multi‐step grafting using 3‐aminopropytrimethoxysilane (APTS) as coupling agent. Characterizations with nitrogen physisorption, X‐ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis suggested that the metal complex was successfully immobilized on the aminosilane‐modified SBA‐15 surface and the channel structure remained intact. The synthesized Co(acac)₂APTS@SBA‐15 catalyst was used in the epoxidation of trans‐stilbene (TS) with molecular oxygen. Compared to the sample prepared by the impregnation method as well as Co(acac)₂ solutions under the same reaction conditions, the Co(acac)₂ immobilized catalyst exhibited remarkably higher TS conversion and trans‐stilbene oxide (TSO) selectivity. An increase in TS conversion with Co content was observed when the Co loading was lower than 0.70% and the 0.70Co(acac)₂APTS@SBA‐15 sample exhibited the best catalytic performance. Up to 50.1% of TS conversion could be achieved within 6 h, affording TSO selectivity as high as 96.7%. The superior catalytic performance of this particular catalyst is attributed to the high activity of the immobilized Co(acac)₂ species on SBA‐15. Copyright © 2016 John Wiley & Sons, Ltd.     

The Effect of Metal‐Ligand Affinity on Fe3O4_Supported Co–Rh Catalysts for Dicyclopentadiene Hydroformylation

The catalytic performances of Co‐Rh/Fe₃O₄ catalysts modified with phosphine ligands (PPh₃) and its analogues on dicyclopentadiene hydroformylation were evaluated. Among these catalysts, Co‐Rh/Fe₃O₄ modified with tris(p‐trifluoromethylphenyl)phosphine was determined to be effective for monoformyltricyclodecanes production, whereas Co‐Rh/Fe₃O₄ modified with PPh₃ or tri‐p‐tolylphosphine was effective for the diformyltricyclodecanes production. To investigate the ligand effects, the complex catalyst system (Co‐Rh/Fe₃O₄ and phosphine ligand) was subjected to pretreatment with syngas and then characterized by thermogravimetry and differential thermal analysis (TG‐DTA). It was determined that the threshold decomposition temperature reflected the corresponding Rh‐phosphine interaction strength, affecting the catalytic selectivity toward different products. A weak Rh‐phosphine interaction was desirable to produce monoformyltricyclodecanes with fast reaction kinetics, whereas a strong Rh‐phosphine complex was required for the synthesis of diformyltricyclodecanes. In addition to the selectivity rule shown in the PPh₃ series, experiments with other ligands also demonstrated similar selectivity trends.     

Nickel‐Catalyzed Cyclization of ortho‐Iodoketoximes and ortho‐Iodoketimines with Alkynes: Synthesis of Highly Substituted Isoquinolines and Isoquinolinium Salts

A convenient method for the synthesis of highly substituted isoquinolines and isoquinolinium salts by the nickel‐catalyzed cyclization of ortho‐haloketoximes and ‐ketimines, respectively, with alkynes is described. The reaction of ortho‐haloketoximes and various alkynes in the presence of [Ni(PPh₃)₂Br₂] and zinc powder in a mixture of acetonitrile and tetrahydrofuran at 80 °C for 15 hours gave 1,3,4‐trisubstituted isoquinoline products in moderate to excellent yields and high regioselectivity. The corresponding isoquinoline N‐oxide was found to be the intermediate in the cyclization reaction pathway. In contrast, the reaction of ortho‐haloketimines and alkynes under similar catalytic conditions in tetrahydrofuran at 70 °C for two hours gave 1,2,3,4‐tetrasubstituted isoquinolinium salts in good to excellent yields.     

Ethylene Oligomerization Catalyzed by MCl2(PPh3)2 Complex‐es/Ethylaluminoxane

The catalytic properties of MCl₂ (PPh₃)₂ (M = Fe, A; Co, B; Ni, C) in combination with ethylaluminoxane (EAO) as cocatalyst for ethylene oligomerization have been investigated. Treatment of the MCl₂ (PPh₃)₂ complexes with EAO in toluene generated active catalysts in situ that are capable of oligomerizating ethylene to low‐carbon olefins. The catalytic activity and product distribution were affected by reaction condition, such as reaction temperature, the ratios of Al/M and the reaction time. The activity of 1.70 × 10⁵ g oligomers/ (mol Co. h) for the catalytic system of CoCl₂(PPh₃)₂ with EAO at 200°C was observed, with the selectivity of 91.1% to C_4–10 olefins and 70.7% to C_4–10 linear α‐olefins.     

Cobalt‐Catalyzed Enantioselective Synthesis of Chiral gem‐Bis(boryl)alkanes

We report an asymmetric synthesis of enantioenriched gem‐bis(boryl)alkanes in an enantioselective diborylation of 1,1‐disubstituted alkenes catalyzed by Co(acac)₂/(R)‐DM‐segphos. A range of activated and unactivated alkenes underwent this asymmetric diborylation in the presence of cyclooctene as a hydrogen acceptor, affording the corresponding gem‐bis(boryl)alkanes with high enantioselectivity. The synthetic utility of these chiral organoboronate compounds was demonstrated through several stereospecific derivatizations and the synthesis of sesquiterpene and sesquiterpenoid natural products.     

Stereospecific and molecular weight‐controlled polymerization of 1,3‐butadiene with Co(acac)3‐MAO catalyst

The polymerization of butadiene (Bd) with Co(acac)₃ in combination with methylaluminoxane (MAO) was investigated. The polymerization of Bd with Co(acac)₃‐MAO catalysts proceeded to give cis‐1,4 polymers (94 – 97%) bearing high molecular weights (40 × 10⁴) with relatively narrow molecular weight distributions (M_w's/M_n's). The molecular weight of the polymers increased linearly with the polymer yield, and the line passed through an original point. The polydispersities of the polymers kept almost constant during reaction time. This indicates that the microstructure and molecular weight of the polymers can be controlled in the polymerization of Bd with the Co(acac)₃‐MAO catalyst. The effects of reaction temperature, Bd concentration, and the MAO/Co molar ratio on the cis‐1,4 microstructure and high molecular weight polymer in the polymerization of Bd with Co(acac)₃‐MAO catalyst were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2793–2798, 2001     

Preparation,characterization and catalytic application of PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐terminated poly(propylene imine) dendrimer

PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐stabilized poly(propylene imine) dendrimer (G3‐M(Pd_x Pt_10−x ) DSNs) have been prepared via synthesis of a 15‐membered triolefinic macrocycle‐modified third‐generation poly(propylene imine) dendrimer (G3‐M) and then synchronous ligand exchange with Pd(PPh₃)₄/Pt(PPh₃)₄ complexes. The structure and catalytic activity of the DSNs were characterized using Fourier transform infrared, ¹H NMR, transmission electron microscopy, energy‐dispersive X‐ray and X‐ray photoelectron analyses. As a novel catalyst system, it can be concluded that the composition of the bimetallic nanoparticles has an influence on the catalytic activity of the hydrogenation reaction of acrylonitrile–butadiene rubber, which can be related to synergistic effect. Furthermore, the selectivity and recyclability of G3‐M(Pd_x Pt_10−x ) DSN catalyst are also discussed.     

trans‐(Methanol)(methyl­di­phenyl­phosphine)­bis­(pentane‐2,4‐dionato)­cobalt(III) hexa­fluoro­phosphate hydrate

The title compound [Co(C₅H₇O₂)₂(C₁₃H₁₃P)(CH₄O)]PF₆·H₂O, (I), which was converted from trans‐[Co(acac)₂(PMePh₂)(H₂O)]PF₆ (acac is pentane‐2,4‐dionato) by recrystallization from aqueous methanol, has been confirmed as have a coordinated methanol ligand. The molecular structure of the complex cation, trans‐[Co(acac)₂(PMePh₂)(MeOH)]⁺, is similar to that of the above aqua complex found in the ClO₄ salt [Kashiwabara et al. (1995). Bull. Chem. Soc. Jpn, 68 , 883–888]. The Co—O bond length for the coordinated methanol is 2.059 (3) Å. There is an intermolecular hydrogen bond between the OH group of the coordinated methanol and one of the O atoms of the acac ligands in an adjacent complex cation [O5?O3′ = 2.914 (4) Å], giving a centrosymmetric dimeric dicationic complex.     

由(E)-β-碘代烯基砜和末端炔合成多取代的1,3-烯炔

通过(E)-b-碘代烯基砜与末端炔的Sonogashira偶联反应,以中等到良好的产率合成了磺酰基取代的1,3-烯炔。在NiCl2(PPh3)2催化下,产物与格氏试剂发生脱磺酰基偶联反应,磺酰基被进一步转化为不同的取代基。     

catena‐Poly­[[bis(pentane‐2,4‐dionato‐κ2O,O′)­cobalt(II)]‐μ‐4,4′‐methylene­dianiline‐κ2N:N′]

In the title compound, [Co(C₅H₇O₂)₂(C₁₃H₁₄N₂)]_n or [Co(acac)₂(dadpm)]_n, where acac is acetyl­acetonate and dadpm is 4,4′‐methylenedianiline, the Co atom is on a centre of symmetry and is octahedrally coordinated by four O atoms from two acac anions and by two N atoms from two dadpm ligands. Each dadpm ligand, which has a twofold axis passing through its methyl­ene C atom, bridges two Co atoms to form a spiral polymeric chain. Neighbouring chains connect via hydrogen bonds to form a two‐dimensional network.     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

Catalyst‐Controlled Ring‐Opening Cycloisomerization Reactions of Cyclopropenyl Carboxylates for Highly Regioselective Synthesis of Different 2‐Alkoxyfurans

Differently substituted 2‐alkoxyfurans (2,3,4‐ or 2,3,5‐trisubstituted furans) were highly regioselectively synthesized by means of the ring‐opening cycloisomerization of the same cyclopropenyl carboxylates with good yields in different solvents and excellent regioselectivity by using [Cu(acac)₂] (acac=acetylacetonate) or [RuCl₂(PPh₃)₃] as the catalyst, respectively. The structures of these two different types of furans were established by X‐ray diffraction studies. A rationale has been proposed.     

Ru‐Catalyzed Branched versus Linear Selective C3‐Alkylation of 2‐Aroylbenzofurans with Acrylates via CH Activation

The carbonyl‐directed C3?H activation and alkylation of 2‐aroylbenzo[b]furans with acrylates occurs selectively either in a linear or branched fashion, depending on the catalyst employed; [Ru(p‐cymene)Cl₂]₂ or Ru(PPh₃)₃Cl₂, respectively. Two alternate pathways—funded upon the differences in steric and electronic preferences of these two complexes—is proposed for the selectivity of linear versus branched products.     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

[5+2] Cycloaddition of 2‐(2‐Aminoethyl)oxiranes with Alkynes via Epoxide Ring‐Opening: A Facile Access to Azepines

A new FeCl₃ and BF₃?OEt₂ co‐catalyzed tandem hetero‐[5+2] cycloaddition of 2‐(2‐aminoethyl)oxiranes with a wide range of alkynes, including terminal alkynes and alkyl‐substituted internal alkynes is presented. This is the first example of rapid and facile production of diverse 2,3‐dihydro‐1H‐azepines through a sequence of epoxide ring‐opening, annulation, and dehydroxylation with broad substrate scope and exquisite selectivity control.     

High polymerization of methyl methacrylate with organonickel/MMAO systems

A series of nickel complexes, including Ni(acac)₂, (C₅H₅)Ni(η³‐allyl), and [NiMe₄Li₂(THF)₂]₂, that were activated with modified methylaluminoxane (MMAO) exhibited high catalytic activity for the polymerization of methyl methacrylate (MMA) but showed no catalytic activity for the polymerization of ethylene and 1‐olefins. The resulting polymers exhibited rather broad molecular weight distributions and low syndiotacticities. In contrast to these initiators, the metallocene complexes (C₅H₅)₂Ni, (C₅Me₅)₂Ni, (Ind)₂Ni, and (Me₃SiC₅H₄)₂Ni provided narrower molecular weight distributions at 60 °C when these initiator were activated with MMAO. Half‐metallocene complexes such as (C₅H₅)NiCl(PPh₃), (C₅Me₅)NiCl(PPh₃), and (Ind)NiCl(PPh₃) produced poly(methyl methacrylate) (PMMA) with much narrower molecular weight distributions when the polymerization was carried out at 0 °C. Ni[1,3‐(CF₃)₂‐acac]₂ generated PMMA with high syndiotacticity. The NiR(acac)(PPh₃) complexes (R = Me or Et) revealed high selectivity in the polymerization of isoprene that produced 1,2‐/3,4‐polymer at 0 °C exclusively, whereas the polymerization at 60 °C resulted in the formation of cis‐1,4‐rich polymers. The polymerization of ethylene with Ni(1,3‐tBu₂‐acac)₂ and Ni[1,3‐(CF₃)₂‐acac]₂ generated oligo‐ethylene with moderate catalytic activity, whereas the reaction of ethylene with Ni(acac)₂/MMAO produced high molecular weight polyethylene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4764–4775, 2000     

Ate Complexes in Iron‐Catalyzed Cross‐Coupling Reactions

Iron‐catalyzed cross‐coupling reactions have an outstanding potential for sustainable organic synthesis, but remain poorly understood mechanistically. Here, we use electrospray‐ionization (ESI) mass spectrometry to identify the ionic species formed in these reactions and characterize their reactivity. Transmetalation of Fe(acac)₃ (acac=acetylacetonato) with PhMgCl in THF (tetrahydrofuran) produces anionic iron ate complexes, whose nuclearity (1 to 4 Fe centers) and oxidation states (ranging from ?I to +III) crucially depend on the presence of additives or ligands. Upon addition of iPrCl, formation of the heteroleptic Fe^III complex [Ph₃Fe(iPr)]^? is observed. Gas‐phase fragmentation of this complex results in reductive elimination and release of the cross‐coupling product with high selectivity.     

Z‐Selective (Cross‐)Dimerization of Terminal Alkynes Catalyzed by an Iron Complex

Efficient iron‐catalyzed homocoupling of terminal alkynes and cross‐dimerization of aryl acetylenes with trimethylsilylacetylene is reported. The complex [Fe(H)(BH₄)(iPr‐PNP)] ( 1 ) catalyzed the (cross‐)dimerization of alkynes at room temperature, with no need for a base or other additives, to give the corresponding dimerized products with Z selectivity in excellent yields (79–99 %).     

Syntheses of N10‐substituted 7‐Arylpyrrolo[2,1‐c]‐[1,4]benzodiazepine‐5,11‐diones

Pyrrolo[2,1‐c][1,4]benzodiazepine‐5,11‐dione and its 7‐bromo derivative were alkylated at the N10 atom applying various methods. The resulting products were subjected to Suzuki–Miyaura reactions using a catalyst system consisting of Pd(Cl)₂(PPh₃)₂ and sodium tert‐butanolate in toluene. Results of an X‐ray single crystal analysis are presented.