Platinum Multicubes Prepared by Ni2+‐Mediated Shape Evolution Exhibit High Electrocatalytic Activity for Oxygen Reduction

Pt(100) facets are generally considered less active for the oxygen reduction reaction (ORR). Reported herein is a unique Pt‐branched structure, a multicube, whose surface is mostly enclosed by {100} facets but contains high‐index facets at the small junction area between the adjacent cubic components. The synthesis is accomplished by a Ni²⁺‐mediated facet evolution from high‐index {311} to {100} facets on the frameworks of multipods. Despite the high {100} facet coverage, the Pt multicubes exhibit impressive ORR activity in terms of half‐wave potential and current density nearly to the level of the most active Pt‐based catalysts, while the durability of catalysts is well retained. The facet evolution creates a set of samples with tunable ratios of high‐index to low‐index facets. The results reveal that the excellent ORR performance of Pt multicubes is a combined result of active sites by high‐index facets and low resistance by flat surface. It is anticipated that this work will offer a new approach to facet‐controlled synthesis and ORR catalysts design.     

Oxide‐Nanotrap‐Anchored Platinum Nanoparticles with High Activity and Sintering Resistance by Area‐Selective Atomic Layer Deposition

An area‐selective atomic layer deposition (AS‐ALD) method is described to construct oxide nanotraps to anchor Pt nanoparticles (NPs) on Al₂O₃ supports. The as‐synthesized catalysts have exhibited outstanding room‐temperature CO oxidation activity, with a significantly lowered apparent activation energy (ca. 22.17 kJ mol⁻¹) that is half that of pure Pt catalyst with the same loading. Furthermore, the structure shows excellent sintering resistance with the high catalytic activity retention up to 600 °C calcination. The key feature of the oxide nanotraps lies in its ability to anchor Pt NPs via strong metal–oxide interactions while still leaving active metal facets exposed. Our reported method for forming such oxide structure with nanotraps shows great potential for the simultaneous enhancement of thermal stability and activity of precious metal NPs.     

Low‐Pt Loaded on a Vanadium Nitride/Graphitic Carbon Composite as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

The high cost of platinum electrocatalysts for the oxygen reduction reaction (ORR) has hindered the commercialization of fuel cells. An effective support can reduce the usage of Pt and improve the reactivity of Pt through synergistic effects. Herein, the vanadium nitride/graphitic carbon (VN/GC) nanocomposites, which act as an enhanced carrier of Pt nanoparticles (NPs) towards ORR, have been synthesized for the first time. In the synthesis, the VN/GC composite could be obtained by introducing VO₃^? and [Fe(CN)₆]^4? ions into the polyacrylic weak‐acid anion‐exchanged resin (PWAR) through an in‐situ anion‐exchanged route, followed by carbonization and a subsequent nitridation process. After loading only 10 % Pt NPs, the resulting Pt‐VN/GC catalyst demonstrates a more positive onset potential (1.01 V), higher mass activity (137.2 mA mg^?1), and better cyclic stability (99 % electrochemical active surface area (ECSA) retention after 2000 cycles) towards ORR than the commercial 20 % Pt/C. Importantly, the Pt‐VN/GC catalyst mainly exhibits a 4 e^?‐transfer mechanism and a low yield of peroxide species, suggesting its potential application as a low‐cost and highly efficient ORR catalyst in fuel cells.     

Accelerating Oxygen‐Reduction Catalysts through Preventing Poisoning with Non‐Reactive Species by Using Hydrophobic Ionic Liquids

Developing cost‐effective electrocatalysts for the oxygen reduction reaction (ORR) is a prerequisite for broad market penetration of low‐temperature fuel cells. A major barrier stems from the poisoning of surface sites by nonreactive oxygenated species and the sluggish ORR kinetics on the Pt catalysts. Herein we report a facile approach to accelerating ORR kinetics by using a hydrophobic ionic liquid (IL), which protects Pt sites from surface oxidation, making the IL‐modified Pt intrinsically more active than its unmodified counterpart. The mass activity of the catalyst is increased by three times to 1.01 A mg^?1_Pt@0.9 V, representing a new record for pure Pt catalysts. The enhanced performance of the IL‐modified catalyst can be stabilized after 30 000 cycles. We anticipate these results will form the basis for an unprecedented perspective in the development of high‐performing electrocatalysts for fuel‐cell applications.     

Carbon‐Supported Divacancy‐Anchored Platinum Single‐Atom Electrocatalysts with Superhigh Pt Utilization for the Oxygen Reduction Reaction

Maximizing the platinum utilization in electrocatalysts toward oxygen reduction reaction (ORR) is very desirable for large‐scale sustainable application of Pt in energy systems. A cost‐effective carbon‐supported carbon‐defect‐anchored platinum single‐atom electrocatalysts (Pt₁/C) with remarkable ORR performance is reported. An acidic H₂/O₂ single cell with Pt₁/C as cathode delivers a maximum power density of 520 mW cm^?2 at 80 °C, corresponding to a superhigh platinum utilization of 0.09 g_Pt kW^?1. Further physical characterization and density functional theory computations reveal that single Pt atoms anchored stably by four carbon atoms in carbon divacancies (Pt‐C₄) are the main active centers for the observed high ORR performance.     

Interfacial Defect Engineering for Improved Portable Zinc–Air Batteries with a Broad Working Temperature

Atomic‐thick interfacial dominated bifunctional catalyst NiO/CoO transition interfacial nanowires (TINWs) with abundant defect sites display high electroactivity and durability in the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). Density functional theory (DFT) calculations show that the excellent OER/ORR performance arises from the electron‐rich interfacial region coupled with defect sites, thus enabling a fast‐redox rate with lower activation barrier for fast electron transfer. When assembled as an air‐electrode, NiO/CoO TINWs delivered the high specific capacity of 842.58 mAh g_Zn^?1, the large energy density of 996.44 Wh kg_Zn^?1 with long‐time stability of more than 33 h (25 °C), and superior performance at low (?10 °C) and high temperature (80 °C).     

Carbon black supported PtCu nanoparticles derived from mix-phased Cu precursor for high-performanced oxygen reduction reaction in acid medium

Alloying high-cost Pt with transition metals has been considered as an effective route to synthesize the electrocatalysts with low Pt loading and excellent activity towards oxygen reduction reaction (ORR) under acid solution. The galvanic replacement method, as featured with efficiency and simplicity, is widely reported to produce Pt-based bimetallic alloys and thereby declare the significance of reductive transition metal precursor on the enhancement of ORR performance. Herein, mix-phased Cu−Cu₂O precursor was applied to prepare carbon black supported highly dispersed PtCu alloy nanoparticles (PtCu/C). The proper Cu−Cu₂O ratios can exactly facilitate the generation of small sized PtCu alloy nanoparticles with regulated bimetallic content. Meanwhile, the Cu₂O phase is revealed to benefit the electron transfer from Pt to Cu and thus improve the intrinsic activity of Pt active sites. And the metallic Cu can favor the promotion of electrochemical active surface area. Consequently, the as-prepared PtCu/C behaves impressive ORR activity with half-wave potential of 0.88 V (vs. RHE) and mass activity of 0.49 A cm⁻² mg_Pt⁻¹ at 0.8 V, which is 9.8 times of commercial Pt/C catalysts. Our work will offer helpful advices for the development and regulation of novel Pt-based alloy materials towards diverse electrocatalysis.     

Synergistic Enhancement of Electrocatalytic Activity toward Oxygen Reduction Reaction in Alkaline Electrolytes with Pentabasic (Fe,B, N,S, P)‐Doped Reduced Graphene Oxide

As alternatives to Pt‐based electrocatalysts, the development of nonprecious metal catalysts with high performance in the cathodic oxygen reduction reaction (ORR) is highly desirable for widespread use in fuel cells. Here we report a simple approach for preparing pentabasic (Fe, B, N, S, P)‐doped reduced graphene oxide (rGO) via a two‐step doping method of adding boric acid and ferric chloride to ternary (N, S, P)‐doped rGO (NSPG). Electrochemical investigation of the composites for the ORR revealed that simultaneously doping appropriate amounts of Fe and B into the NSPG produced a synergistic effect that endowed the prepared catalyst with both a positively shifted ORR half‐wave potential and high selectivity for the 4e^? reduction of O₂. The optimized Fe₂B‐NSPG catalyst approached a 4e^? process for the ORR with a half‐wave potential (E_1/2=0.90 V vs. RHE) even 30 mV higher than that of the commercial Pt/C catalyst in alkaline solution. Furthermore, relative to the Pt/C catalyst, the Fe₂B‐NSPG demonstrated superior stability and excellent tolerance of the methanol cross‐over effect. This simple method afforded pentabasic (Fe, B, N, S, P)‐doped rGO as a promising nonprecious metal catalyst used for alkaline fuel cells.     

Pomegranate‐Inspired Design of Highly Active and Durable Bifunctional Electrocatalysts for Rechargeable Metal–Air Batteries

Rational design of highly active and durable electrocatalysts for oxygen reactions is critical for rechargeable metal–air batteries. Herein, we report the design and development of composite electrocatalysts based on transition metal oxide nanocrystals embedded in a nitrogen‐doped, partially graphitized carbon framework. Benefiting from the unique pomegranate‐like architecture, the composite catalysts possess abundant active sites, strong synergetic coupling, enhanced electron transfer, and high efficiencies in the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The Co₃O₄‐based composite electrocatalyst exhibited a high half‐wave potential of 0.842 V for ORR, and a low overpotential of only 450 mV at the current density of 10 mA cm^?2 for OER. A single‐cell zinc–air battery was also fabricated with superior durability, holding great promise in the practical implementation of rechargeable metal–air batteries.     

高载量PtNi金属间化合物的氧还原电催化性能

采用改进的多元醇法制备了PtNi(原子比1∶1)质量分数为60%的高金属载量碳载PtNi合金(PtNi/C), 通过在450 ℃下退火处理获得了碳载PtNi金属间化合物氧还原电催化剂. 该催化剂对氧还原的质量比活性和面积比活性分别是商业化Pt/C(JM Pt/C)催化剂的1.66和2.3倍; 并且加速耐久性测试后PtNi金属间化合物催化剂的质量比活性仍与Pt/C的初始性能相当, 耐久性得到了大幅提升. PtNi/C金属间化合物催化剂氧还原活性和稳定性的提高归因于PtNi的有序原子排布结构及催化剂表面零价金属含量的提高.     

Antiperovskite Intermetallic Nanoparticles for Enhanced Oxygen Reduction

Antiperovskite Co₃InC_0.7N_0.3 nanomaterials with highly enhanced oxygen reduction reaction (ORR) performance were prepared by tuning nitrogen contents through a metal–organic framework (MOF)‐derived strategy. The nanomaterial surpasses all reported noble‐metal‐free antiperovskites and even most perovskites in terms of onset potential (0.957 V at J=0.1 mA cm^?2) and half‐wave potential (0.854 V). The OER and zinc–air battery performance demonstrate its multifunctional oxygen catalytic activities. DFT calculation was performed and for the first time, a 4 e^? dissociative ORR pathway on (200) facets of antiperovskite was revealed. Free energy studies showed that nitrogen substitution could strengthen the OH desorption as well as hydrogenation that accounts for the enhanced ORR performance. This work expands the scope for material design via tailoring the nitrogen contents for optimal reaction free energy and hence performance of the antiperovskite system.     

Controllable Synthesis of Ultrathin NiCo2O4 Nanosheets Incorporated onto Composite Nanotubes for Efficient Oxygen Reduction

Exploring non‐precious‐metal‐based oxygen reduction reaction (ORR) electrocatalysts featuring high efficiency, low cost, and environmental friendliness is of great importance for the broad applications of fuel cells and metal–air batteries. In this work, ultrathin NiCo₂O₄ nanosheets deposited on 1D SnO₂ nanotubes (SNT) were successfully fabricated through a productive electrospinning technique followed by a sintering and low‐temperature coprecipitation strategy. This hierarchically engineered architecture has ultrathin NiCo₂O₄ nanosheets uniformly and fully erected on both walls of tubular SNTs, which results in improved electrochemical activity as an ORR catalyst, in terms of positive onset potential and high current density, as well as superior tolerance to crossover effects and long‐term durability with respect to the commercial Pt/C catalyst. The excellent performance of SNT@NiCo₂O₄ composites may originate from their rationally designed hierarchical tubular nanostructure with completely exposed active sites and interconnected 1D networks for efficient electron and electrolyte transfer; this makes these composite nanotubes promising candidates to replace platinum‐based catalysts for practical fuel cell and metal–air battery applications.     

A Phthalocyanine‐Based Layered Two‐Dimensional Conjugated Metal–Organic Framework as a Highly Efficient Electrocatalyst for the Oxygen Reduction Reaction

Layered two‐dimensional (2D) conjugated metal–organic frameworks (MOFs) represent a family of rising electrocatalysts for the oxygen reduction reaction (ORR), due to the controllable architectures, excellent electrical conductivity, and highly exposed well‐defined molecular active sites. Herein, we report a copper phthalocyanine based 2D conjugated MOF with square‐planar cobalt bis(dihydroxy) complexes (Co‐O₄) as linkages (PcCu‐O₈‐Co) and layer‐stacked structures prepared via solvothermal synthesis. PcCu‐O₈‐Co 2D MOF mixed with carbon nanotubes exhibits excellent electrocatalytic ORR activity (E_1/2=0.83 V vs. RHE, n=3.93, and j_L=5.3 mA cm^?2) in alkaline media, which is the record value among the reported intrinsic MOF electrocatalysts. Supported by in situ Raman spectro‐electrochemistry and theoretical modeling as well as contrast catalytic tests, we identified the cobalt nodes as ORR active sites. Furthermore, when employed as a cathode electrocatalyst for zinc–air batteries, PcCu‐O₈‐Co delivers a maximum power density of 94 mW cm^?2, outperforming the state‐of‐the‐art Pt/C electrocatalysts (78.3 mW cm^?2).     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

Hyperporous‐Carbon‐Supported Nonprecious Metal Electrocatalysts for the Oxygen Reduction Reaction

Highly porous carbonaceous nonprecious metal catalysts for the oxygen reduction reaction are prepared by carbonization of low‐cost metalloporphyrin‐based hyper‐crosslinked polymers (MPH‐X). With high surface area (2768 m² g⁻¹), hierarchical porous structure, and high metal loading (9.97 wt %), the obtained hyperporous carbon MPH‐Fe/C catalyst exhibits high oxygen reduction reaction (ORR) activity with a half‐wave potential (0.816 V) that is comparable to the 0.819 V of commercial Pt/C. Stability tests reveal that MPH‐Fe/C also exhibits outstanding long‐term durability and methanol tolerance. Our findings may offer an alternative approach to produce nonprecious metal ORR catalysts on a large scale owing to the low‐cost MPH‐X precursors with diverse metal types.     

Multifunctional Co3S4/Graphene Composites for Lithium Ion Batteries and Oxygen Reduction Reaction

Cobalt sulfide is a good candidate for both lithium ion batteries (LIBs) and cathodic oxygen reduction reaction (ORR), but low conductivity, poor cyclability, capacity fading, and structural changes hinder its applications. The incorporation of graphene into Co₃S₄ makes it a promising electrode by providing better electrochemical coupling, enhanced conductivity, fast mobility of ions and electrons, and a stabilized structure due to its elastic nature. With the objective of achieving high‐performance composites, herein we report a facile hydrothermal process for growing Co₃S₄ nanotubes (NTs) on graphene (G) sheets. Electrochemical impedance spectroscopy (EIS) verified that graphene dramatically increases the conductivity of the composites to almost twice that of pristine Co₃S₄. Electrochemical measurements indicated that the as‐synthesized Co₃S₄/G composites exhibit good cyclic stability and a high discharge capacity of 720 mA h g^?1 up to 100 cycles with 99.9 % coulombic efficiency. Furthermore, the composites react with dissolved oxygen in the ORR by four‐ and two‐electron mechanisms in both acidic and basic media with an onset potential close to that of commercial Pt/C. The stability of the composites is much higher than that of Pt/C, and exhibit high methanol tolerance. Thus, these properties endorse Co₃S₄/G composites as auspicious candidates for both LIBs and ORR.     

Channel‐Rich RuCu Nanosheets for pH‐Universal Overall Water Splitting Electrocatalysis

Channel‐rich RuCu snowflake‐like nanosheets (NSs) composed of crystallized Ru and amorphous Cu were used as efficient electrocatalysts for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting in pH‐universal electrolytes. The optimized RuCu NSs/C‐350 °C and RuCu NSs/C‐250 °C show attractive activities of OER and HER with low overpotentials and small Tafel slopes, respectively. When applied to overall water splitting, the optimized RuCu NSs/C can reach 10 mA cm^?2 at cell voltages of only 1.49, 1.55, 1.49 and 1.50 V in 1 m KOH, 0.1 m KOH, 0.5 m H₂SO₄ and 0.05 m H₂SO₄, respectively, much lower than those of commercial Ir/C∥Pt/C. The optimized electrolyzer exhibits superior durability with small potential change after up to 45 h in 1 m KOH, showing a class of efficient functional electrocatalysts for overall water splitting.     

Stability of Fe‐N‐C Catalysts in Acidic Medium Studied by Operando Spectroscopy

Fundamental understanding of non‐precious metal catalysts for the oxygen reduction reaction (ORR) is the nub for the successful replacement of noble Pt in fuel cells and, therefore, of central importance for a technological breakthrough. Herein, the degradation mechanisms of a model high‐performance Fe‐N‐C catalyst have been studied with online inductively coupled plasma mass spectrometry (ICP‐MS) and differential electrochemical mass spectroscopy (DEMS) coupled to a modified scanning flow cell (SFC) system. We demonstrate that Fe leaching from iron particles occurs at low potential (<0.7 V) without a direct adverse effect on the ORR activity, while carbon oxidation occurs at high potential (>0.9 V) with a destruction of active sites such as FeN_xC_y species. Operando techniques combined with identical location‐scanning transmission electron spectroscopy (IL‐STEM) identify that the latter mechanism leads to a major ORR activity decay, depending on the upper potential limit and electrolyte temperature. Stable operando potential windows and operational strategies are suggested for avoiding degradation of Fe‐N‐C catalysts in acidic medium.     

Optimizing the Size of Platinum Nanoparticles for Enhanced Mass Activity in the Electrochemical Oxygen Reduction Reaction

High oxygen reduction (ORR) activity has been for many years considered as the key to many energy applications. Herein, by combining theory and experiment we prepare Pt nanoparticles with optimal size for the efficient ORR in proton‐exchange‐membrane fuel cells. Optimal nanoparticle sizes are predicted near 1, 2, and 3 nm by computational screening. To corroborate our computational results, we have addressed the challenge of approximately 1 nm sized Pt nanoparticle synthesis with a metal–organic framework (MOF) template approach. The electrocatalyst was characterized by HR‐TEM, XPS, and its ORR activity was measured using a rotating disk electrode setup. The observed mass activities (0.87±0.14 A mg_Pt^?1) are close to the computational prediction (0.99 A mg_Pt^?1). We report the highest to date mass activity among pure Pt catalysts for the ORR within similar size range. The specific and mass activities are twice as high as the Tanaka commercial Pt/C catalysis.     

Iridium‐Based Cubic Nanocages with 1.1‐nm‐Thick Walls: A Highly Efficient and Durable Electrocatalyst for Water Oxidation in an Acidic Medium

We report a highly active and durable water oxidation electrocatalyst based on cubic nanocages with a composition of Ir₄₄Pd₁₀, together with well‐defined {100} facets and porous walls of roughly 1.1 nm in thickness. Such nanocages substantially outperform all the water oxidation electrocatalysts reported in literature, with an overpotential of only 226 mV for reaching 10 mA cm^?2_geo at a loading of Ir as low as 12.5 μg_Ir cm^?2 on the electrode in acidic media. When benchmarked against a commercial Ir/C electrocatalyst at 250 mV of overpotential, such a nanocage‐based catalyst not only shows enhancements (18.1‐ and 26.2‐fold, respectively) in terms of mass (1.99 A mg^?1_Ir) and specific (3.93 mA cm^?2_Ir) activities, but also greatly enhanced durability. The enhancements can be attributed to a combination of multiple merits, including a high utilization efficiency of Ir atoms and an open structure beneficial to the electrochemical oxidation of Ir to the active form of IrO_x.