Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1−xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g⁻¹ h⁻¹ and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Enhanced Photocatalytic Hydrogen‐Production Performance of Graphene–ZnxCd1−xS Composites by Using an Organic S Source

In response to the increasing concerns over energy and environmental sustainability, photocatalytic water‐splitting technology has attracted broad attention for its application in directly converting solar energy to valuable hydrogen (H₂) energy. In this study, high‐efficiency visible‐light‐driven photocatalytic H₂ production without the assistance of precious‐metal cocatalysts was achieved on graphene–Zn_xCd_1?xS composites with controlled compositions. The graphene‐Zn_xCd_1?xS composites were for the first time fabricated by a one‐step hydrothermal method with thiourea as an organic S source. It was found that thiourea facilitates heterogeneous nucleation of Zn_xCd_1?xS and in situ growth of Zn_xCd_1?xS nanoparticles on graphene nanosheets. Such a scenario results in abundant and intimate interfacial contact between graphene and Zn_xCd_1?xS nanoparticles, efficient transfer of the photogenerated charge carriers, and enhanced photocatalytic activity for H₂ production. The highest H₂‐production rate of 1.06 mmol h^?1 g^?1 was achieved on a graphene–Zn_0.5Cd_0.5S composite photocatalyst with a graphene content of 0.5 wt %, and the apparent quantum efficiency was 19.8 % at 420 nm. In comparison, the graphene–Zn_xCd_1?xS composite photocatalyst prepared by using an inorganic S source such as Na₂S exhibited much lower activity for photocatalytic H₂ production. In this case, homogeneous nucleation of Zn_xCd_1?xS becomes predominant and results in insufficient and loose contact with the graphene backbone through weak van der Waals forces and a large particle size. This study highlights the significance of the choice of S source in the design and fabrication of advanced graphene‐based sulfide photocatalytic materials with enhanced activity for photocatalytic H₂ production.     

Aqueous CO2 Reduction with High Efficiency Using α‐Co(OH)2‐Supported Atomic Ir Electrocatalysts

Electrochemical reduction of CO₂ into energy‐dense chemical feedstock and fuels provides an attractive pathway to sustainable energy storage and artificial carbon cycle. Herein, we report the first work to use atomic Ir electrocatalyst for CO₂ reduction. By using α‐Co(OH)₂ as the support, the faradaic efficiency of CO could reach 97.6 % with a turnover frequency (TOF) of 38290 h^?1 in aqueous electrolyte, which is the highest TOF up to date. The electrochemical active area is 23.4‐times higher than Ir nanoparticles (2 nm), which is highly conductive and favors electron transfer from CO₂ to its radical anion (CO₂^.?). Moreover, the more efficient stabilization of CO₂^.? intermediate and easy charge transfer makes the atomic Ir electrocatalyst facilitate CO production. Hence, α‐Co(OH)₂‐supported atomic Ir electrocatalysts show enhanced CO₂ activity and stability.     

Mixed Metal–Organic Framework with Multiple Binding Sites for Efficient C2H2/CO2 Separation

The separation of C₂H₂/CO₂ is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal–organic framework (M′MOF), [Fe(pyz)Ni(CN)₄] ( FeNi‐M′MOF , pyz=pyrazine), with multiple functional sites and compact one‐dimensional channels of about 4.0 Å for C₂H₂/CO₂ separation. This MOF shows not only a remarkable volumetric C₂H₂ uptake of 133 cm³ cm^?3, but also an excellent C₂H₂/CO₂ selectivity of 24 under ambient conditions, resulting in the second highest C₂H₂‐capture amount of 4.54 mol L^?1, thus outperforming most previous benchmark materials. The separation performance of this material is driven by π–π stacking and multiple intermolecular interactions between C₂H₂ molecules and the binding sites of FeNi‐M′MOF . This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi‐M′MOF as a promising material for C₂H₂/CO₂ separation.     

Inserting CO2 into Aryl C−H Bonds of Metal–Organic Frameworks: CO2 Utilization for Direct Heterogeneous C−H Activation

Described for the first time is that carbon dioxide (CO₂) can be successfully inserted into aryl C?H bonds of the backbone of a metal–organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO₂ for heterogeneous C?H activation and carboxylation reactions on MOFs, and opens a new avenue for CO₂ chemical transformations under mild reaction conditions.     

Electrosynthesis of a Defective Indium Selenide with 3D Structure on a Substrate for Tunable CO2 Electroreduction to Syngas

Syngas (CO/H₂) is a feedstock for the production of a variety of valuable chemicals and liquid fuels, and CO₂ electrochemical reduction to syngas is very promising. However, the production of syngas with high efficiency is difficult. Herein, we show that defective indium selenide synthesized by an electrosynthesis method on carbon paper (γ‐In₂Se₃/CP) is an extremely efficient electrocatalyst for this reaction. CO and H₂ were the only products and the CO/H₂ ratio could be tuned in a wide range by changing the applied potential or the composition of the electrolyte. In particular, using nanoflower‐like γ‐In₂Se₃/CP (F‐γ‐In₂Se₃/CP) as the electrode, the current density could be as high as 90.1 mA cm^?2 at a CO/H₂ ratio of 1:1. In addition, the Faradaic efficiency of CO could reach 96.5 % with a current density of 55.3 mA cm^?2 at a very low overpotential of 220 mV. The outstanding electrocatalytic performance of F‐γ‐In₂Se₃/CP can be attributed to its defect‐rich 3D structure and good contact with the CP substrate.     

Photocatalytic α‐Tertiary Amine Synthesis via C−H Alkylation of Unmasked Primary Amines

A practical, catalytic entry to α,α,α‐trisubstituted (α‐tertiary) primary amines by C?H functionalisation has long been recognised as a critical gap in the synthetic toolbox. We report a simple and scalable solution to this problem that does not require any in situ protection of the amino group and proceeds with 100 % atom‐economy. Our strategy, which uses an organic photocatalyst in combination with azide ion as a hydrogen atom transfer (HAT) catalyst, provides a direct synthesis of α‐tertiary amines, or their corresponding γ‐lactams. We anticipate that this methodology will inspire new retrosynthetic disconnections for substituted amine derivatives in organic synthesis, and particularly for challenging α‐tertiary primary amines.     

In Situ Formation of a MoS2‐Based Inorganic–Organic Nanocomposite by Directed Thermal Decomposition

Nanocomposites based on molybdenum disulfide (MoS₂) and different carbon modifications are intensively investigated in several areas of applications due to their intriguing optical and electrical properties. Addition of a third element may enhance the functionality and application areas of such nanocomposites. Herein, we present a facile synthetic approach based on directed thermal decomposition of (Ph₄P)₂MoS₄ generating MoS₂ nanocomposites containing carbon and phosphorous. Decomposition at 250 °C yields a composite material with significantly enlarged MoS₂ interlayer distances caused by in situ formation of Ph₃PS bonded to the MoS₂ slabs through Mo?S bonds and (Ph₄P)₂S molecules in the van der Waals gap, as was evidenced by ³¹P solid‐state NMR spectroscopy. Visible‐light‐driven hydrogen generation demonstrates a high catalytic performance of the materials.     

Methanol Synthesis at a Wide Range of H2/CO2 Ratios over a Rh‐In Bimetallic Catalyst

There is increasing interest in capturing H₂ generated from renewables with CO₂ to produce methanol. However, renewable hydrogen production is expensive and in limited quantity compared to CO₂. Excess CO₂ and limited H₂ in the feedstock gas is not favorable for CO₂ hydrogenation to methanol, causing low activity and poor methanol selectivity. Now, a class of Rh‐In catalysts with optimal adsorption properties to the intermediates of methanol production is presented. The Rh‐In catalyst can effectively catalyze methanol synthesis but inhibit the reverse water‐gas shift reaction under H₂‐deficient gas flow and shows the best competitive methanol productivity under industrially applicable conditions in comparison with reported values. This work demonstrates a strong potential of Rh‐In bimetallic composition, from which a convenient methanol synthesis based on flexible feedstock compositions (such as H₂/CO₂ from biomass derivatives) with lower energy cost can be established.     

An α‐{P2W18O62}6–‐Based Supramolecular Hybrid Inorganic‐Organic Compound with Visible Light‐Driven Photocatalytic Properties

The α‐[P₂W₁₈O₆₂]^6–‐based coordination polymer [Cu₂(phen)₃(H₂O)₃(P₂W₁₈O₆₂)][Cu(phen)₂(H₂O)] · 5H₂O ( 1 ) (phen = phenanthroline), was hydrothermally synthesized and characterized by single‐crystal and powder X‐ray diffraction, IR and UV/Vis diffuse reflection spectroscopy, and elemental analysis. Structural studies reveal that compound 1 exhibits a three‐dimensional (3D) supramolecular structure based on π–π and hydrogen bonding interactions. In addition, visible light driven photocatalytic experiments of compound 1 were also studied.