Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

Ni3FeN‐Supported Fe3Pt Intermetallic Nanoalloy as a High‐Performance Bifunctional Catalyst for Metal–Air Batteries

Electrocatalysts for both the oxygen reduction and evolution reactions (ORR and OER) are vital for the performances of rechargeable metal–air batteries. Herein, we report an advanced bifunctional oxygen electrocatalyst consisting of porous metallic nickel‐iron nitride (Ni₃FeN) supporting ordered Fe₃Pt intermetallic nanoalloy. In this hybrid catalyst, the bimetallic nitride Ni₃FeN mainly contributes to the high activity for the OER while the ordered Fe₃Pt nanoalloy contributes to the excellent activity for the ORR. Robust Ni₃FeN‐supported Fe₃Pt catalysts show superior catalytic performance to the state‐of‐the‐art ORR catalyst (Pt/C) and OER catalyst (Ir/C). The Fe₃Pt/Ni₃FeN bifunctional catalyst enables Zn–air batteries to achieve a long‐term cycling performance of over 480 h at 10 mA cm⁻² with high efficiency. The extraordinarily high performance of the Fe₃Pt/Ni₃FeN bifunctional catalyst makes it a very promising air cathode in alkaline electrolyte.     

A Reliable Aerosol‐Spray‐Assisted Approach to Produce and Optimize Amorphous Metal Oxide Catalysts for Electrochemical Water Splitting

An aerosol‐spray‐assisted approach (ASAA) is proposed and confirmed as a precisely controllable and continuous method to fabricate amorphous mixed metal oxides for electrochemical water splitting. The proportion of metal elements can be accurately controlled to within (5±5) %. The products can be sustainably obtained, which is highly suitable for industrial applications. ASAA was used to show that Fe₆Ni₁₀O_x is the best catalyst among the investigated Fe‐Ni‐O_x series with an overpotential of as low as 0.286 V (10 mA cm^?2) and a Tafel slope of 48 mV/decade for the electrochemical oxygen evolution reaction. Therefore, this work contributes a versatile, continuous, and reliable way to produce and optimize amorphous metal oxide catalysts.     

Fe2O3‐N‐doped Honeycomb‐like Porous Carbon Derived from Nature Silk Sericin as Electrocatalysts for Oxygen Evolution Reaction

A facile method is reported to form a honeycomb‐like porous nanomaterial by intercalation of iron nitrate using nature silk sericin (SS) as nitrogen and carbon source. A series of Fe₂O₃ nanoparticles anchored on Fe₂O₃‐N‐doped graphite carbon electrocatalysts (SS‐Fe) were synthesized, exhibits well‐defined pore structure and excellent oxygen evolution reaction (OER) catalytic activities. Among these materials, SS‐Fe‐0.5 shows the best performance, the overpotential of SS‐Fe‐0.5 at 10 mA · cm^–2 is 440 mV (vs. RHE) and the Tafel slope is only 68 mV · dec^–1. The results indicate that it is promising to the preparation of carbon catalyst materials using natural, renewable and abundant resources for electrocatalysis.     

Fast and Simple Preparation of Iron‐Based Thin Films as Highly Efficient Water‐Oxidation Catalysts in Neutral Aqueous Solution

Water oxidation is the key step in natural and artificial photosynthesis for solar‐energy conversion. As this process is thermodynamically unfavorable and is challenging from a kinetic point of view, the development of highly efficient catalysts with low energy cost is a subject of fundamental significance. Herein, we report on iron‐based films as highly efficient water‐oxidation catalysts. The films can be quickly deposited onto electrodes from Fe^II ions in acetate buffer at pH 7.0 by simple cyclic voltammetry. The extremely low iron loading on the electrodes is critical for improved atom efficiency for catalysis. Our results showed that this film could catalyze water oxidation in neutral phosphate solution with a turnover frequency (TOF) of 756 h^?1 at an applied overpotential of 530 mV. The significance of this approach includes the use of earth‐abundant iron, the fast and simple method for catalyst preparation, the low catalyst loading, and the large TOF for O₂ evolution in neutral aqueous media.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Synergistic Enhancement of Electrocatalytic Activity toward Oxygen Reduction Reaction in Alkaline Electrolytes with Pentabasic (Fe,B, N,S, P)‐Doped Reduced Graphene Oxide

As alternatives to Pt‐based electrocatalysts, the development of nonprecious metal catalysts with high performance in the cathodic oxygen reduction reaction (ORR) is highly desirable for widespread use in fuel cells. Here we report a simple approach for preparing pentabasic (Fe, B, N, S, P)‐doped reduced graphene oxide (rGO) via a two‐step doping method of adding boric acid and ferric chloride to ternary (N, S, P)‐doped rGO (NSPG). Electrochemical investigation of the composites for the ORR revealed that simultaneously doping appropriate amounts of Fe and B into the NSPG produced a synergistic effect that endowed the prepared catalyst with both a positively shifted ORR half‐wave potential and high selectivity for the 4e^? reduction of O₂. The optimized Fe₂B‐NSPG catalyst approached a 4e^? process for the ORR with a half‐wave potential (E_1/2=0.90 V vs. RHE) even 30 mV higher than that of the commercial Pt/C catalyst in alkaline solution. Furthermore, relative to the Pt/C catalyst, the Fe₂B‐NSPG demonstrated superior stability and excellent tolerance of the methanol cross‐over effect. This simple method afforded pentabasic (Fe, B, N, S, P)‐doped rGO as a promising nonprecious metal catalyst used for alkaline fuel cells.     

Carbon Nanotubes Decorated with CoP Nanocrystals: A Highly Active Non‐Noble‐Metal Nanohybrid Electrocatalyst for Hydrogen Evolution

The development of effective and inexpensive hydrogen evolution reaction (HER) electrocatalysts for future renewable energy systems is highly desired. The strongly acidic conditions in proton exchange membranes create a need for acid‐stable HER catalysts. A nanohybrid that consists of carbon nanotubes decorated with CoP nanocrystals (CoP/CNT) was prepared by the low‐temperature phosphidation of a Co₃O₄/CNT precursor. As a novel non‐noble‐metal HER catalyst operating in acidic electrolytes, the nanohybrid exhibits an onset overpotential of as low as 40 mV, a Tafel slope of 54 mV dec^?1, an exchange current density of 0.13 mA cm^?2, and a Faradaic efficiency of nearly 100 %. This catalyst maintains its catalytic activity for at least 18 hours and only requires overpotentials of 70 and 122 mV to attain current densities of 2 and 10 mA cm^?2, respectively.     

Controlled Synthesis of 3D Flower‐like Ni2P Composed of Mesoporous Nanoplates for Overall Water Splitting

Developing efficient non‐noble metal and earth‐abundant electrocatalysts with tunable microstructures for overall water splitting is critical to promote clean energy technologies for a hydrogen economy. Herein, novel three‐dimensional (3D) flower‐like Ni₂P composed of mesoporous nanoplates with controllable morphology and high surface area was prepared by a hydrothermal method and low‐temperature phosphidation as efficient electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Compared with the urchin‐like Ni_x P_y , the 3D flower‐like Ni₂P with a diameter of 5 μm presented an efficient and stable catalytic performance in 0.5 m H₂SO₄, with a small Tafel slope of 79 mV dec⁻¹ and an overpotential of about 240 mV at a current density of 10 mA cm⁻² with a mass loading density of 0.283 mg cm⁻². In addition, the catalyst also exhibited a remarkable performance for the OER in 1.0 m KOH electrolyte, with an overpotential of 320 mV to reach a current density of 10 mA cm⁻² and a small Tafel slope of 72 mV dec⁻¹. The excellent catalytic performance of the as‐prepared Ni₂P may be ascribed to its novel 3D morphology with unique mesoporous structure.     

Electrodeposited Amorphous Tungsten‐doped Cobalt Oxide as an Efficient Catalyst for the Oxygen Evolution Reaction

Thin film of amorphous tungsten‐doped cobalt oxide (W:CoO) was successfully grown on a conducting electrode via an electrochemical oxidation process employing a [Co(WS₄)₂]^2? deposition bath. The W:CoO catalyst displays an attractive performance for the oxygen evolution reaction in an alkaline solution. In an NaOH solution of pH 13, W:CoO operates with a moderate onset overpotential of 230 mV and requires 320 mV overpotential to generate a catalytic current density of 10 mA cm^?2. A low Tafel slope of 45 mV decade^?1 was determined, indicating a rapid O₂‐evolving kinetics. The as‐prepared W:CoO belongs to the best cobalt oxide‐based catalysts ever reported for the oxygen evolution (OER) reaction.     

Phosphorus‐Modified Tungsten Nitride/Reduced Graphene Oxide as a High‐Performance,Non‐Noble‐Metal Electrocatalyst for the Hydrogen Evolution Reaction

Phosphorus‐modified tungsten nitride/reduced graphene oxide (P‐WN/rGO) is designed as a high‐efficient, low‐cost electrocatalyst for the hydrogen evolution reaction (HER). WN (ca. 3 nm in size) on rGO is first synthesized by using the H₃[PO₄(W₃O₉)₄] cluster as a W source. Followed by phosphorization, the particle size increase slightly to about 4 nm with a P content of 2.52 at %. The interaction of P with rGO and WN results in an obvious increase of work function, being close to Pt metal. The P‐WN/rGO exhibits low onset overpotential of 46 mV, Tafel slope of 54 mV dec^?1, and a large exchange current density of 0.35 mA cm^?2 in acid media. It requires overpotential of only 85 mV at current density of 10 mA cm^?2, while remaining good stability in accelerated durability testing. This work shows that the modification with a second anion is powerful way to design new catalysts for HER.     

Fe‐Doped Ni3C Nanodots in N‐Doped Carbon Nanosheets for Efficient Hydrogen‐Evolution and Oxygen‐Evolution Electrocatalysis

Uniform Ni₃C nanodots dispersed in ultrathin N‐doped carbon nanosheets were successfully prepared by carburization of the two dimensional (2D) nickel cyanide coordination polymer precursors. The Ni₃C based nanosheets have lateral length of about 200 nm and thickness of 10 nm. When doped with Fe, the Ni₃C based nanosheets exhibited outstanding electrocatalytic properties for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For example, 2 at % Fe (atomic percent) doped Ni₃C nanosheets depict a low overpotential (292 mV) and a small Tafel slope (41.3 mV dec⁻¹) for HER in KOH solution. An outstanding OER catalytic property is also achieved with a low overpotential of 275 mV and a small Tafel slope of 62 mV dec⁻¹ in KOH solution. Such nanodot‐incorporated 2D hybrid structures can serve as an efficient bifunctional electrocatalyst for overall water splitting.     

Sulfur‐Modified Oxygen Vacancies in Iron–Cobalt Oxide Nanosheets: Enabling Extremely High Activity of the Oxygen Evolution Reaction to Achieve the Industrial Water Splitting Benchmark

The oxygen vacancies of defective iron–cobalt oxide (FeCoO_x‐Vo) nanosheets are modified by the homogeneously distributed sulfur (S) atoms. S atoms can not only effectively stabilize oxygen vacancies (Vo), but also form the Co?S coordination with Co active site in the Vo, which can modulate the electronic structure of the active site, enabling FeCoO_x‐Vo‐S to exhibit much superior OER activity. FeCoO_x‐Vo‐S exhibits a mass activity of 2440.0 A g^?1 at 1.5 V vs. RHE in 1.0 m KOH, 25.4 times higher than that of RuO₂. The Tafel slope is as low as 21.0 mV dec^?1, indicative of its excellent charge transfer rate. When FeCoO_x‐Vo‐S (anode catalyst) is paired with the defective CoP₃/Ni₂P (cathode catalyst) for overall water splitting, current densities of as high as 249.0 mA cm^?2 and 406.0 mA cm^?2 at a cell voltage of 2.0 V and 2.3 V, respectively, can be achieved.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Interface Engineering of MoS2/Ni3S2 Heterostructures for Highly Enhanced Electrochemical Overall‐Water‐Splitting Activity

To achieve sustainable production of H₂ fuel through water splitting, low‐cost electrocatalysts for the hydrogen‐evolution reaction (HER) and the oxygen‐evolution reaction (OER) are required to replace Pt and IrO₂ catalysts. Herein, for the first time, we present the interface engineering of novel MoS₂/Ni₃S₂ heterostructures, in which abundant interfaces are formed. For OER, such MoS₂/Ni₃S₂ heterostructures show an extremely low overpotential of ca. 218 mV at 10 mA cm^?2, which is superior to that of the state‐of‐the‐art OER electrocatalysts. Using MoS₂/Ni₃S₂ heterostructures as bifunctional electrocatalysts, an alkali electrolyzer delivers a current density of 10 mA cm^?2 at a very low cell voltage of ca. 1.56 V. In combination with DFT calculations, this study demonstrates that the constructed interfaces synergistically favor the chemisorption of hydrogen and oxygen‐containing intermediates, thus accelerating the overall electrochemical water splitting.     

An Approach to Preparing Ni–P with Different Phases for Use as Supercapacitor Electrode Materials

Herein, we describe a simple two‐step approach to prepare nickel phosphide with different phases, such as Ni₂P and Ni₅P₄, to explain the influence of material microstructure and electrical conductivity on electrochemical performance. In this approach, we first prepared a Ni–P precursor through a ball milling process, then controlled the synthesis of either Ni₂P or Ni₅P₄ by the annealing method. The as‐prepared Ni₂P and Ni₅P₄ are investigated as supercapacitor electrode materials for potential energy storage applications. The Ni₂P exhibits a high specific capacitance of 843.25 F g^?1, whereas the specific capacitance of Ni₅P₄ is 801.5 F g^?1. Ni₂P possesses better cycle stability and rate capability than Ni₅P₄. In addition, the Fe₂O₃//Ni₂P supercapacitor displays a high energy density of 35.5 Wh kg^?1 at a power density of 400 W kg^?1 and long cycle stability with a specific capacitance retention rate of 96 % after 1000 cycles, whereas the Fe₂O₃//Ni₅P₄ supercapacitor exhibits a high energy density of 29.8 Wh kg^?1 at a power density of 400 W kg^?1 and a specific capacitance retention rate of 86 % after 1000 cycles.     

High Sensitive Microsensor Based on Organic‐Inorganic Composite for Two‐Dimensional Mapping of H2O2 by SECM

The present work describes the development of a selective, sensitive and stable sensing microsensor for scanning electrochemical microscopy (SECM) to measure H₂O₂ during electrochemical reduction of oxygen. The microsensor is based on graphene and Poly(3,4‐ethylenedioxythiophene) composite as support to iron (III) hexacyanoferrate (II) (PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor). The electrochemical properties of the PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor were investigated by cyclic voltammetry (CV) and scanning electrochemical microscopy (SECM). The PEDOT/graphene/Fe^III₄[Fe^II(CN)₆]₃ microsensor showed an excellent electrocatalytic activity toward hydrogen peroxide (H₂O₂) reduction with a diminution of the overpotential of about 500 mV in comparison to the process at a bare gold microelectrode. The microsensor presented excellent performance for two dimensional mapping of H₂O₂ by SECM in 0.1 mol L^?1 phosphate buffer solution (pH 7.0). Under optimized conditions, a linear response range from 1 up to 1000 µmol L^?1 was obtained with a sensitivity of 0.08 nA L µmol^?1 and limit of detection of 0.5 µmol L^?1.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

A Comparative Study of CO Oxidation on Nitrogen‐ and Phosphorus‐Doped Graphene

The geometry, electronic structure, and catalytic properties of nitrogen‐ and phosphorus‐doped graphene (N‐/P‐graphene) are investigated by density functional theory calculations. The reaction between adsorbed O₂ and CO molecules on N‐ and P‐graphene is comparably studied via Langmuir–Hinshelwood (LH) and Eley–Rideal (ER) mechanisms. The results indicate that a two‐step process can occur, namely, CO+O₂→CO₂+O_ads and CO+O_ads→CO₂. The calculated energy barriers of the first step are 15.8 and 12.4 kcal mol^?1 for N‐ and P‐graphene, respectively. The second step of the oxidation reaction on N‐graphene proceeds with an energy barrier of about 4 kcal mol^?1. It is noteworthy that this reaction step was not observed on P‐graphene because of the strong binding of O_ads species on the P atoms. Thus, it can be concluded that low‐cost N‐graphene can be used as a promising green catalyst for low‐temperature CO oxidation.     

Energy‐Saving Electrolytic Hydrogen Generation: Ni2P Nanoarray as a High‐Performance Non‐Noble‐Metal Electrocatalyst

It is highly attractive but challenging to develop earth‐abundant electrocatalysts for energy‐saving electrolytic hydrogen generation. Herein, we report that Ni₂P nanoarrays grown in situ on nickel foam (Ni₂P/NF) behave as a durable high‐performance non‐noble‐metal electrocatalyst for hydrazine oxidation reaction (HzOR) in alkaline media. The replacement of the sluggish anodic oxygen evolution reaction with such the more thermodynamically favorable HzOR enables energy‐saving electrochemical hydrogen production with the use of Ni₂P/NF as a bifunctional catalyst for anodic HzOR and cathodic hydrogen evolution reaction. When operated at room temperature, this two‐electrode electrolytic system drives 500 mA cm⁻² at a cell voltage as low as 1.0 V with strong long‐term electrochemical durability and 100 % Faradaic efficiency for hydrogen evolution in 1.0 m KOH aqueous solution with 0.5 m hydrazine.