Controlled Synthesis of a Vacancy‐Defect Single‐Atom Catalyst for Boosting CO2 Electroreduction

The reaction of precursors containing both nitrogen and oxygen atoms with Ni^II under 500 °C can generate a N/O mixing coordinated Ni‐N₃O single‐atom catalyst (SAC) in which the oxygen atom can be gradually removed under high temperature due to the weaker Ni?O interaction, resulting in a vacancy‐defect Ni‐N₃‐V SAC at Ni site under 800 °C. For the reaction of Ni^II with the precursor simply containing nitrogen atoms, only a no‐vacancy‐defect Ni‐N₄ SAC was obtained. Experimental and DFT calculations reveal that the presence of a vacancy‐defect in Ni‐N₃‐V SAC can dramatically boost the electrocatalytic activity for CO₂ reduction, with extremely high CO₂ reduction current density of 65 mA cm^?2 and high Faradaic efficiency over 90 % at ?0.9 V vs. RHE, as well as a record high turnover frequency of 1.35×10⁵ h^?1, much higher than those of Ni‐N₄ SAC, and being one of the best reported electrocatalysts for CO₂‐to‐CO conversion to date.     

Yolk-shell nanostructural Ni_2P/C composites as the high performance electrocatalysts toward urea oxidation

Highly active and low-cost catalytic electrodes for urea oxidation reaction(UOR) are always crucial for exploration of urea fuel cells.Herein,novel york-shell-structural Ni_2P/C na nosphere hybrids(Ni_2P/C-YS)are rationally constructed via a hydrothermal method and subsequent phosphidation treatment under different temperature ranging from 250℃ to 450℃ for UOR applications.In the in-situ constructed hollow york-shell structure,the coupling of conductive carbon materials and active Ni_2P allows numerous interfaces facilitating the electron transfer and thereby accelerating the catalytic kinetics.The results demonstrate that Ni_2P/C-YS-350 nanocomposite can boost the UOR process with a low potential of 1.366 V vs.RHE at a current density of 50 mA/cm~2 in alkaline electrolyte and afford the superior durability with negligible potential decay after 23 h.This study presents that the carbon coated Ni_2P hybrid with the optimized crystallinities and hollow york-shell configurations can be a promising candidate for application in urea fuel cells.     

Carbonic Anhydrase‐Mimetic Bolaamphiphile Self‐Assembly for CO2 Hydration and Sequestration

A biomimetic catalyst was prepared through the self‐assembly of a bolaamphiphilic molecule with histidine moieties for the sequestration of carbon dioxide. The histidyl bolaamphiphilic molecule bis(N‐α‐amidohistidine)‐1,7‐heptane dicarboxylate has been synthesized and self‐assembled to produce analogues of the active sites of carbonic anhydrase (CA) after association with Zn²⁺ ions. Spectroscopic analysis demonstrated the coordination of the Zn²⁺ ions with histidine imidazole moieties, which is the core conformation of CA active sites. The Zn‐associated self‐assembly worked as a CA‐mimetic catalyst that shows catalytic activity for CO₂ hydration. Evaluation of the kinetics of using para‐nitrophenylacetate revealed that the kinetic parameters of the CA‐mimetic catalyst were maximized at the optimal Zn concentration and that excess Zn ions resulted in deteriorated catalytic activity. The performance of the CA‐mimetic catalyst was enhanced by changing the pH value and temperature of the reaction, which implies that the hydrolysis of the substrate is the rate‐determining step. The catalyst‐assisted sequestration of CO₂ was demonstrated by CaCO₃ precipitation upon the addition of Ca²⁺ ions. This study offers an easy way to prepare enzyme analogues for CO₂ sequestration through the self‐assembly of bolaamphiphile molecules with designer biochemical moieties.     

Structure Sensitivity of CO Oxidation on Co3O4: A DFT Study

The reaction mechanism of CO oxidation on the Co₃O₄ (110) and Co₃O₄ (111) surfaces is investigated by means of spin‐polarized density functional theory (DFT) within the GGA+U framework. Adsorption situation and complete reaction cycles for CO oxidation are clarified. The results indicate that 1) the U value can affect the calculated energetic result significantly, not only the absolute adsorption energy but also the trend in adsorption energy; 2) CO can directly react with surface lattice oxygen atoms (O_2f/O_3f) to form CO₂ via the Mars–van Krevelen reaction mechanism on both (110)‐B and (111)‐B; 3) pre‐adsorbed molecular O₂ can enhance CO oxidation through the channel in which it directly reacts with molecular CO to form CO₂ [O₂(a)+CO(g)→CO₂(g)+O(a)] on (110)‐A/(111)‐A; 4) CO oxidation is a structure‐sensitive reaction, and the activation energy of CO oxidation follows the order of Co₃O₄ (111)‐A(0.78 eV)>Co₃O₄ (111)‐B (0.68 eV)>Co₃O₄ (110)‐A (0.51 eV)>Co₃O₄ (110)‐B (0.41 eV), that is, the (110) surface shows higher reactivity for CO oxidation than the (111) surface; 5) in addition to the O_2f, it was also found that Co³⁺ is more active than Co²⁺, so both O_2f and Co³⁺ control the catalytic activity of CO oxidation on Co₃O₄, as opposed to a previous DFT study which concluded that either Co³⁺ or O_2f is the active site.     

Elucidating the Electrocatalytic CO2 Reduction Reaction over a Model Single‐Atom Nickel Catalyst

Designing effective electrocatalysts for the carbon dioxide reduction reaction (CO₂RR) is an appealing approach to tackling the challenges posed by rising CO₂ levels and realizing a closed carbon cycle. However, fundamental understanding of the complicated CO₂RR mechanism in CO₂ electrocatalysis is still lacking because model systems are limited. We have designed a model nickel single‐atom catalyst (Ni SAC) with a uniform structure and well‐defined Ni‐N₄ moiety on a conductive carbon support with which to explore the electrochemical CO₂RR. Operando X‐ray absorption near‐edge structure spectroscopy, Raman spectroscopy, and near‐ambient X‐ray photoelectron spectroscopy, revealed that Ni⁺ in the Ni SAC was highly active for CO₂ activation, and functioned as an authentic catalytically active site for the CO₂RR. Furthermore, through combination with a kinetics study, the rate‐determining step of the CO₂RR was determined to be *CO₂^?+H⁺→*COOH. This study tackles the four challenges faced by the CO₂RR; namely, activity, selectivity, stability, and dynamics.     

Tuning the Redox Properties of a Nonheme Iron(III)–Peroxo Complex Binding Redox‐Inactive Zinc Ions by Water Molecules

Redox‐inactive metal ions play important roles in tuning chemical properties of metal–oxygen intermediates. Herein we report the effect of water molecules on the redox properties of a nonheme iron(III)–peroxo complex binding redox‐inactive metal ions. The coordination of two water molecules to a Zn²⁺ ion in (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂ ( 1 ‐Zn²⁺) decreases the Lewis acidity of the Zn²⁺ ion, resulting in the decrease of the one‐electron oxidation and reduction potentials of 1 ‐Zn²⁺. This further changes the reactivities of 1 ‐Zn²⁺ in oxidation and reduction reactions; no reaction occurred upon addition of an oxidant (e.g., cerium(IV) ammonium nitrate (CAN)) to 1 ‐Zn²⁺, whereas 1 ‐Zn²⁺ coordinating two water molecules, (TMC)Fe^III‐(O₂)‐Zn(CF₃SO₃)₂‐(OH₂)₂ [ 1 ‐Zn²⁺‐(OH₂)₂], releases the O₂ unit in the oxidation reaction. In the reduction reactions, 1 ‐Zn²⁺ was converted to its corresponding iron(IV)–oxo species upon addition of a reductant (e.g., a ferrocene derivative), whereas such a reaction occurred at a much slower rate in the case of 1 ‐Zn²⁺‐(OH₂)₂. The present results provide the first biomimetic example showing that water molecules at the active sites of metalloenzymes may participate in tuning the redox properties of metal–oxygen intermediates.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.     

Noble‐Metal‐Free Single‐Atom Catalysts CuAl4O7–9− for CO Oxidation by O2

The single copper atom doped clusters CuAl₄O_7–9^? can catalyze CO oxidation by O₂. The CuAl₄O_7–9^? clusters are the first group of experimentally identified noble‐metal free single atom catalysts for such a prototypical reaction. The reactions were characterized by mass spectrometry and density functional theory calculations. The CuAl₄O₉CO^? is much more reactive than CuAl₄O₉^? in the reaction with CO to generate CO₂. One adsorbed CO is crucial to stabilize Cu of CuAl₄O₉^? around +I oxidation state and promote the oxidation of another CO. The widely emphasized correlation between the catalytic reactivity of CO oxidation and Cu oxidation state can be understood at the strictly molecular level. The remarkable difference between Cu catalysis and noble‐metal catalysis was discussed.     

Metal‐Substituted Zeolitic Imidazolate Framework ZIF‐108: Gas‐Sorption and Membrane‐Separation Properties

A series of dual‐metal zeolitic imidazolate framework (ZIF) crystals with SOD and RHO topologies was synthesised by metal substitution from ZIF‐108 (Zn(2‐nitroimidazolate)₂, SOD topology) as the parent material. This was based on the concept that metal substitution of ZIF‐108 requires a much lower activation energy than homogenous nucleation owing to the metastability of ZIF‐108. In‐depth investigations of the formation processes of the daughter ZIFs indicated that the transformation of ZIF‐108 is a dissolution/heterogeneous nucleation process. Typical isostructural Co²⁺ substitution mainly occurs at the outer surface of ZIF‐108 and results in a core–shell structure. On the contrary, the Cu²⁺‐substituted ZIF has a RHO topology with a homogeneous distribution of Cu²⁺ ions in the structure. Substitution with Ni²⁺ resulted in a remarkable enhancement in adsorption selectivity toward CO₂ over N₂ by a factor of up to 227. With Co²⁺‐substituted nanoparticles as inorganic filler, a mixed matrix membrane based on polysulfone displayed greatly improved performance in the separation of H₂/CH₄, CO₂/N₂ and CO₂/CH₄.     

Metallic Nickel Hydroxide Nanosheets Give Superior Electrocatalytic Oxidation of Urea for Fuel Cells

The direct urea fuel cell (DUFC) is an important but challenging renewable energy production technology, it offers great promise for energy‐sustainable developments and mitigating water contamination. However, DUFCs still suffer from the sluggish kinetics of the urea oxidation reaction (UOR) owing to a 6 e^? transfer process, which poses a severe hindrance to their practical use. Herein, taking β‐Ni(OH)₂ nanosheets as the proof‐of‐concept study, we demonstrated a surface‐chemistry strategy to achieve metallic Ni(OH)₂ nanosheets by engineering their electronic structure, representing a first metallic configuration of transition‐metal hydroxides. Surface sulfur incorporation successfully brings synergetic effects of more exposed active sites, good wetting behavior, and effective electron transport, giving rise to greatly enhanced performance for UOR. Metallic nanosheets exhibited a much higher current density, smaller onset potential and stronger durability.     

Integrating Hydrogen Production with Aqueous Selective Semi‐Dehydrogenation of Tetrahydroisoquinolines over a Ni2P Bifunctional Electrode

Exploring an alternative anodic reaction to produce value‐added chemicals with high selectivity, especially integrated with promoted hydrogen generation, is desirable. Herein, a selective semi‐dehydrogenation of tetrahydroisoquinolines (THIQs) is demonstrated to replace the oxygen evolution reaction (OER) for boosting H₂ evolution reaction (HER) in water over a Ni₂P nanosheet electrode. The value‐added semi‐dehydrogenation products, dihydroisoquinolines (DHIQs), can be selectively obtained with high yields at the anode. The controllable semi‐dehydrogenation is attributed to the in situ formed Ni^II/Ni^III redox active species. Such a strategy can deliver a variety of DHIQs bearing electron‐withdrawing/donating groups in good yields and excellent selectivities, and can be applied to gram‐scale synthesis. A two‐electrode Ni₂P bifunctional electrolyzer can produce both H₂ and DHIQs with robust stability and high Faradaic efficiencies at a much lower cell voltage than that of overall water splitting.     

Metallic Single‐Unit‐Cell Orthorhombic Cobalt Diselenide Atomic Layers: Robust Water‐Electrolysis Catalysts

The bottleneck in water electrolysis lies in the kinetically sluggish oxygen evolution reaction (OER). Herein, conceptually new metallic non‐metal atomic layers are proposed to overcome this drawback. Metallic single‐unit‐cell CoSe₂ sheets with an orthorhombic phase are synthesized by thermally exfoliating a lamellar CoSe₂‐DETA hybrid. The metallic character of orthorhombic CoSe₂ atomic layers, verified by DFT calculations and temperature‐dependent resistivities, allows fast oxygen evolution kinetics with a lowered overpotential of 0.27 V. The single‐unit‐cell thickness means 66.7 % of the Co²⁺ ions are exposed on the surface and serve as the catalytically active sites. The lowered Co²⁺ coordination number down to 1.3 and 2.6, gives a lower Tafel slope of 64 mV dec^?1 and higher turnover frequency of 745 h^?1. Thus, the single‐unit‐cell CoSe₂ sheets have around 2 and 4.5 times higher catalytic activity compared with the lamellar CoSe₂‐DETA hybrid and bulk CoSe₂.     

Enhanced Carbon Dioxide Electroreduction to Carbon Monoxide over Defect‐Rich Plasma‐Activated Silver Catalysts

Efficient, stable catalysts with high selectivity for a single product are essential if electroreduction of CO₂ is to become a viable route to the synthesis of industrial feedstocks and fuels. A plasma oxidation pre‐treatment of silver foil enhances the number of low‐coordinated catalytically active sites, which dramatically lowers the overpotential and increases the activity of CO₂ electroreduction to CO. At −0.6 V versus RHE more than 90 % Faradaic efficiency towards CO was achieved on a pre‐oxidized silver foil. While transmission electron microscopy (TEM) and operando X‐ray absorption spectroscopy showed that oxygen species can survive in the bulk of the catalyst during the reaction, quasi in situ X‐ray photoelectron spectroscopy showed that the surface is metallic under reaction conditions. DFT calculations reveal that the defect‐rich surface of the plasma‐oxidized silver foils in the presence of local electric fields drastically decrease the overpotential of CO₂ electroreduction.     

Energy‐Saving Electrolytic Hydrogen Generation: Ni2P Nanoarray as a High‐Performance Non‐Noble‐Metal Electrocatalyst

It is highly attractive but challenging to develop earth‐abundant electrocatalysts for energy‐saving electrolytic hydrogen generation. Herein, we report that Ni₂P nanoarrays grown in situ on nickel foam (Ni₂P/NF) behave as a durable high‐performance non‐noble‐metal electrocatalyst for hydrazine oxidation reaction (HzOR) in alkaline media. The replacement of the sluggish anodic oxygen evolution reaction with such the more thermodynamically favorable HzOR enables energy‐saving electrochemical hydrogen production with the use of Ni₂P/NF as a bifunctional catalyst for anodic HzOR and cathodic hydrogen evolution reaction. When operated at room temperature, this two‐electrode electrolytic system drives 500 mA cm⁻² at a cell voltage as low as 1.0 V with strong long‐term electrochemical durability and 100 % Faradaic efficiency for hydrogen evolution in 1.0 m KOH aqueous solution with 0.5 m hydrazine.     

Rose‐like Nanocomposite of Fe‐Ni Phosphides/Iron Oxide as Efficient Catalyst for Oxygen Evolution Reaction

In order to accelerate the reaction rate of water splitting, it is of immense importance to develop low‐cost, stable and efficient catalysts. In this study, the facile synthesis of a novel rose‐like nanocomposite catalyst (Ni₂P/Fe₂P/Fe₃O₄) is reported. The synthesis process includes a solvothermal step and a phosphatization step to combine iron oxides and iron‐nickel phosphides. Ni₂P/Fe₂P/Fe₃O₄ performs well in catalyzing oxygen evolution reaction, with a very low overpotential of 365 mV to reach 10 mA cm^?2 current density. The Tafel slope is as low as 59 mV dec^?1. Ni₂P/Fe₂P/Fe₃O₄ has a large double‐layer capacitance that contributes to a high electrochemically active area. Moreover, this catalyst is very stable for long‐term use. Therefore, the Ni₂P/Fe₂P/Fe₃O₄ catalyst has a high potential for use in oxygen evolution reactions.     

Quercetin 2,4‐Dioxygenase Activates Dioxygen in a Side‐On O2–Ni Complex

Quercetin 2,4‐dioxygenase (quercetinase) from Streptomyces uses nickel as the active‐site cofactor to catalyze oxidative cleavage of the flavonol quercetin. How this unusual active‐site metal supports catalysis and O₂ activation is under debate. We present crystal structures of Ni‐quercetinase in three different states, thus providing direct insight into how quercetin and O₂ are activated at the Ni²⁺ ion. The Ni²⁺ ion is coordinated by three histidine residues and a glutamate residue (E⁷⁶) in all three states. Upon binding, quercetin replaces one water ligand at Ni and is stabilized by a short hydrogen bond through E⁷⁶, the carboxylate group of which rotates by 90°. This conformational change weakens the interaction between Ni and the remaining water ligand, thereby preparing a coordination site at Ni to bind O₂. O₂ binds side‐on to the Ni²⁺ ion and is perpendicular to the C2?C3 and C3?C4 bonds of quercetin, which are cleaved in the following reaction steps.     

Ultrathin Spinel‐Structured Nanosheets Rich in Oxygen Deficiencies for Enhanced Electrocatalytic Water Oxidation

Electrochemical water splitting is a clean technology for H₂ fuels, but greatly hindered by the slow kinetics of the oxygen evolution reaction (OER). Herein, a series of spinel‐structured nanosheets with oxygen deficiencies and ultrathin thicknesses were designed to increase the reactivity and the number of active sites of the catalysts, which were then taken as an excellent platform for promoting the water oxidation process. Theoretical investigations showed that the oxygen vacancies confined in the ultrathin nanosheet could lower the adsorption energy of H₂O, leading to increased OER efficiency. As expected, the NiCo₂O₄ ultrathin nanosheets rich in oxygen vacancies exhibited a large current density of 285 mA cm^?2 at 0.8 V and a small overpotential of 0.32 V, both of which are superior to the corresponding values of bulk samples or samples with few oxygen deficiencies and even higher than those of most reported non‐precious‐metal catalysts. This work should provide a new pathway for the design of advanced OER catalysts.     

Applications of iron and nickel immobilized on hydroxyapatite‐core‐shell γ‐Fe2O3 as a nanomagnetic catalyst for the chemoselective oxidation of sulfides to sulfoxides under solvent‐free conditions

In the present study, Fe²⁺ and Ni²⁺ immobilized on hydroxyapatite‐core‐shell γ‐Fe₂O₃ (γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺) with a high surface area has been synthesized and characterized by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and scanning electron microscope (SEM) techniques. Then, γ‐Fe₂O₃@HAp‐Fe²⁺ and γ‐Fe₂O₃@HAp‐Ni²⁺ were used as a new and magnetically recoverable nano catalyst for the selective oxidation of sulfides to sulfoxides with 33% aqueous H₂O₂ (0.5 mL) as an oxidant at room temperature in good to excellent yields and short reaction time. Nontoxicity of reagent, mild reaction condition, inexpensive and high catalytic activity, simple experimental procedure, short period of conversion and excellent yields, and ease of recovery from the reaction mixture using an external magnet are the advantages of the present method.     

A Comparative Study of CO Oxidation on Nitrogen‐ and Phosphorus‐Doped Graphene

The geometry, electronic structure, and catalytic properties of nitrogen‐ and phosphorus‐doped graphene (N‐/P‐graphene) are investigated by density functional theory calculations. The reaction between adsorbed O₂ and CO molecules on N‐ and P‐graphene is comparably studied via Langmuir–Hinshelwood (LH) and Eley–Rideal (ER) mechanisms. The results indicate that a two‐step process can occur, namely, CO+O₂→CO₂+O_ads and CO+O_ads→CO₂. The calculated energy barriers of the first step are 15.8 and 12.4 kcal mol^?1 for N‐ and P‐graphene, respectively. The second step of the oxidation reaction on N‐graphene proceeds with an energy barrier of about 4 kcal mol^?1. It is noteworthy that this reaction step was not observed on P‐graphene because of the strong binding of O_ads species on the P atoms. Thus, it can be concluded that low‐cost N‐graphene can be used as a promising green catalyst for low‐temperature CO oxidation.     

Kinetics and mechanism of the oxidation of 4‐methyl‐3‐thiosemicarbazide by acidic bromate

The oxidation of 4‐methyl‐3‐thiosemicarbazide (MTSC) by bromate and bromine was studied in acidic medium. The stoichiometry of the reaction is extremely complex, and is dependent on the ratio of the initial concentrations of the oxidant to reductant. In excess MTSC and after prolonged standing, the stoichiometry was determined to be H₃CN(H)CSN(H)NH₂ + 3BrO₃^? → 2CO₂ + NH₄⁺ + SO₄^2? + N₂ + 3Br^? + H⁺ (A). An interim stoichiometry is also obtained in which one of the CO₂ molecules is replaced by HCOOH with an overall stoichiometry of 3H₃CN(H)CSN(H)NH₂ + 8BrO₃^? → CO₂ + NH₄⁺ + SO₄^2? + HCOOH + N₂ + 3Br^? + 3H⁺ (B). Stoichiometry A and B are not very different, and so mixtures of the two were obtained. Compared to other oxidations of thiourea‐based compounds, this reaction is moderately fast and is first order in both bromate and substrate. It is autocatalytic in HOBr. The reaction is characterized by an autocatalytic sigmoidal decay in the consumption of MTSC, while in excess bromate conditions the reaction shows an induction period before autocatalytic formation of bromine. In both cases, oxybromine chemistry, which involves the initial formation of the reactive species HOBr and Br₂, is dominant. The reactions of MTSC with both HOBr and Br₂ are fast, and so the overall rate of oxidation is dependent upon the rates of formation of these reactive species from bromate. Our proposed mechanism involves the initial cleavage of the C? N bond on the azo‐side of the molecule to release nitrogen and an activated sulfur species that quickly and rapidly rearranges to give a series of thiourea acids. These thiourea acids are then oxidized to the sulfonic acid before cleavage of the C? S bond to give SO₄^2?, CO₂, and NH₄⁺. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 237–247, 2002