Derivatized cyclodextrins for the separation of enantiomers in capillary electrophoresis

The use of cyclodextrin derivatives for the efficient separation of enantiomeric drugs is described. Hydroxypropylation, methylation or carboxymethylation of the cyclodextrin not only result in a better solubility of the cyclodextrin in aqueous solutions, but also favor, via additional hydrogen bonding, the stabilization of one of the cyclodextrin-analyte complexes. The influence of the background electrolyte on peak shape is also described here. Carboxymethylated cyclodextrin can be used in similar manner to uncharged cyclodextrins at low pH values (below 4). At pH values above 5, however, its charge also allows the separation of uncharged enantiomers as in a micellar-like system.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Synthesis and application of clindamycin succinate as a novel chiral selector for capillary electrophoresis

A novel chiral selector, clindamycin succinate, was synthesized and first used as a chiral selector in capillary electrophoresis (CE). The chiral resolution ability of this kind of clindamycin derivation was studied by CE using some racemic drugs as model analytes. From the experimental results, it was found that both resolution and selectivity of the selector were dependent on the following parameters: concentration of chiral selectors, pH of the running buffer, temperature of the capillary column, applied voltage and organic modifier used. The results show that the chiral selector possesses high resolution toward some racemic drugs, including ofloxacin, chlorphenamine, tryptophan, propranolol, sotalol and metoprolol. Excellent chiral resolution of these tested drugs was achieved under the optimal conditions of 50 mM clindamycin succinate, 10% MeOH v/v, 50 mM Tris buffer, pH 4.0, at 22 kV and 20 °C within 25 min.     

Enantioselective analysis of ofloxacin enantiomers by partial-filling capillary electrophoresis with bacteria as chiral selectors

The enantiomeric separation of ofloxacin enantiomers (OFLX) was achieved by using capillary electrophoresis partial-filled with Escherichia coli, Pseudomonas aeruginosa (Gram-negative), and Staphylococcus aureus (Gram-positive) as chiral selectors. Experimental parameters, including the concentration of background electrolyte, applied voltage, length of the filled bacteria plug, and pH of the buffer, were intensively investigated. Baseline separation of OFLX could be achieved within 7 min by using E. coli and P. aeruginosa as chiral selectors under the following conditions: electrophoretic buffer composed of 10 mM phosphate buffer at pH 7.4, applied voltage at 15 kV, and the bacteria (6.0 × 10(8) cells/mL) were injected into the capillary by gravity with injection height of 17.5 cm for 180 s (E. coli), 300 s (P. aeruginosa), and 300 s (S. aureus), respectively. E. coli and P. aeruginosa had better chiral selectivity for OFLX than S. aureus, which was in good agreement with OFLX having better antimicrobial activity on Gram-negative rather than Gram-positive bacteria. A novel method was developed for the enantioselective separation of enantiomers using bacteria as chiral selectors, which provides a new approach for antimicrobials enantioselective analysis, chiral pharmacodynamics, and chiral pharmacokinetics studies.     

Evaluation of the synergistic effect with amino acids for enantioseparation of basic drugs using capillary electrophoresis

The synergistic effect of two acidic amino acids, aspartic and glutamic acid, on the electrophoretic enantioseparation of four basic drugs was evaluated in the BGE containing a CD and at different pHs. Chlorpheniramine, hydroxyzine, propranolol and tramadol were used as the basic model drugs. However, no enantioseparations were achieved with a BGE containing sole amino acid, but the combined use of an acidic amino acid and a CD showed improved enantioseparations (synergistic effect) compared with the single CD system. The results demonstrated that at optimized pH, the electrostatic interactions of the anionic amino acids with the positively charged basic drugs could result in a decrease of the analyte migration velocity and it consequently improved the enantioseparation. The effective parameters such as the amino acid and chiral selector type and concentration, buffer pH, applied voltage, and capillary temperature were optimized. Favorable enantiomeric resolution and migration times of the model drugs were achieved with a 100 mM phosphate buffer solution (pH 3.0) containing 5.0 mM HP‐α‐CD/HP‐β‐CD and 20 mM aspartic acid with an 18 kV applied voltage at 25°C. ¹H NMR experiments were also carried out in a mixture of an analyte and CD in the absence and presence of aspartic acid. The NMR results were consistent with the results obtained by CE which showed the synergistic effect of amino acid.     

Investigation of the enantioselectivity of tetramethylammonium‐lactobionate chiral ionic liquid based dual selector systems toward basic drugs in capillary electrophoresis

Recently, chiral ionic liquids (CILs) have received increasing interest in chiral separation by CE. Nevertheless, the lack of deep perception of the specific mechanism about CILs in CE for enantioseparation still perplexes a legion of researchers, despite the strenuous efforts. In this paper, a lactobionic acid based ionic liquid, tetramethylammonium‐lactobionate (TMA‐LA) was applied for the first time in CE to establish dual selector system with clindamycin phosphate (CP) for enantiomeric separation. Compared to single CP system or single TMA‐LA system significantly improved separations of seven tested rameric drugs (propranolol, nefopam, citalopram, chlorphenamine, metoprolol, bisoprolol, and esmolol) were observed in the dual selector systems. Several crucial parameters such as type and proportion of organic modifier, buffer composition and pH, and concentration of TMA‐LA/CP were systematically investigated to achieve satisfied enantioseparation. Meanwhile, molecular modeling was applied to demonstrate the chiral recognition mechanism of the TMA‐LA/CP dual‐selector separation system using the molecular docking software Autodock, which well supported the experimental results. The existence of TMA‐LA/CP complex may give rise to a higher discriminatory ability against the enantiomers, indicating the reason of improved separation in TMA‐LA/CP system. All the influence factors evaluated by means of Statistical Product and Service Solutions (SPSS) to research the influences on the chiral separation system.     

Analysis of enantiomers in biological matrices by charged cyclodextrin-mediated capillary zone electrophoresis in column-coupling arrangement with capillary isotachophoresis

The possibility to apply charged chiral selector as buffer additive in capillary zone electrophoresis (CZE) on-line coupled with capillary isotachophoresis (CITP) was studied. Enantioseparations and determinations of trace (ng/ml) antihistaminic drugs [pheniramine (PHM), dimethindene (DIM), dioxopromethazine (DIO)] present in samples of complex ionic matrices (urine) served as model examples. A negatively charged carboxyethyl-β-cyclodextrin (CE-β-CD) was used as a chiral selector in analytical CZE stage following upon a sample pretreatment by CITP (preconcentration of the analytes from 5 to 20-times diluted urine samples, partial sample clean up removing macroconstituents from the sample matrices). A high recognition capability of the oppositely charged CE-β-CD was demonstrated by enantioselective retardation of the drugs in presence of micro-and semi-macroconstituents migrating in CZE stage and detectable by UV detector. In this way, enantiomers of the drugs could be easily separated and determined. Due to lack of interferences between the drugs and sample-matrix constituents in presence of charged CE-β-CD, demands on both spacers in CITP step and multiple column-switching were minimized. CITP-CZE method with charged selector appeared to be a useful analytical approach for the trace enantiomers in complex ionic matrices as it combined enhanced separation selectivity and sample loadabitlity with high separation efficiency and provided favorable performance parameters including sensitivity, linearity, precision, accuracy/recovery and robustness with minimal demands on sample preparation. Analysis of urine sample taken from a patient treated by PHM, showing concentration profile of PHM enantiomers and their metabolites, illustrated potentialities of the method in clinical research.     

毛细管区带电泳法拆分手性药物环扁桃酯

近年来,随着不同种类的手性添加剂[1]在毛细管电泳(CZE)中的使用,毛细管电泳越来越显示出其强有力的手性拆分性能。具有特殊笼状结构并含有多个手性中心的环糊精及其衍生物是毛细电泳手性分离研究中最常采用的手性添加添[2-4]。本文合成了环糊精衍生物单3 O 苯基胺甲酰基 β CD[2]并以之作为手性选择剂分离了β CD及手性药物环扁桃酯。1　实验部分932 3 HVPS高压电源(山东省化工研究院),DD 2000型可调波长紫外检测器(中国科学院大连化学物理研究所),XWT型记录仪(上海大华仪表厂),pHS 25型酸度计(上海雷磁仪器厂),石英毛细管45cm…     

Rectangular capillary electrophoresis: Some theoretical considerations

Summary A theoretical study of the use of rectangular columns in capillary electrophoresis (CE) is presented. It was done employing some of the most important parameters that normally define the performance of CE separations, i.e. thermal effect, analysis speed, efficiency and sample capacity. Theoretical results from rectangular and cylindrical capillaries are compared in terms of the aforementionated parameters. Also, an estimate of the additional zone broadening that arises from the noninfinite dimension in the y-direction, in which the channel has its largest dimension, is presented.     

Study of a new chiral selector: Sodium arsenyl-(l)-(+) tartrate for capillary electrophoresis

Sodium arsenyl-(l)-(+) tartrate (Na₂[As₂(+)-tart₂]·3H₂O) was examined and evaluated as a chiral selector using capillary electrophoresis. This chiral selector showed enantioselective associations with many cationic analytes, including primary, secondary, and tertiary amines. Also, baseline separations of ruthenium(II) polypyridyl complexes were achieved within 10 min. The effect of buffer type, chiral selector concentration, voltage applied, buffer concentration, buffer pH and organic modifier concentration were examined and optimized.     

Phospholipid-lysozyme coating for chiral separation in capillary electrophoresis

A phospholipid coating with lysozyme as chiral recognition reagent permeated into the phospholipid membrane was developed for the chiral capillary electrophoretic (CE) separation of D- and L-tryptophan. As a kind of carriers, coated as phospholipid membranes onto the inner wall of a fused-silica capillary, liposomes are able to interact with basic proteins such as lysozyme, which may reside on the surface of the phospholipid membrane or permeate into the middle of the membrane. The interaction results in strong immobilization of lysozyme in the capillary. Coatings prepared with liposomes alone did not allow stable immobilization of lysozyme into the phospholipid membranes, as seen from the poor repeatability of the chiral separation. When 1-(4-iodobutyl)-1,4-dimethylpiperazin-1-ium iodide (M1C4) was applied as a first coating layer in the capillary, the electroosmotic flow (EOF) was effectively suppressed, the phospholipid coating was stabilized, and the lysozyme immobilization was much improved. The liposome composition, the running buffer, and the capillary inner diameter all affected the chiral separation of D- and L-tryptophan. Coating with 4 mM M1C4 and then 1 mM phosphatidylcholine (PC)/phosphatidylserine (PS) (80:20 mol%), with 20 mM (ionic strength) Tris at pH 7.4 as the running buffer, resulted in optimal chiral separation with good separation efficiency and resolution. Since lysozyme was strongly permeated into the membrane of the phospholipids on the capillary surface, the chiral separation of D- and L-tryptophan was achieved without lysozyme in the running buffer. The effects of different coating procedures and separation conditions on separation were evaluated, and the M1C4-liposome and liposome-lysozyme interactions were elucidated. The usefulness of protein immobilized into phospholipid membranes as a chiral selector in CE is demonstrated for the first time.     

Mechanism of sequence-based separation of single-stranded DNA in capillary zone electrophoresis

Separation of DNA by length using CGE is a mature field. Separation of DNA by sequence, in contrast, is a more difficult problem. Existing techniques generally rely upon changes in intrinsic or induced differences in conformation. Previous work in our group showed that sets of ssDNA of the same length differing in sequence by as little as a single base could be separated by CZE using simple buffers at high ionic strength. Here, we explore the basis of the separation using circular dichroism spectroscopy, fluorescence anisotropy, and small angle X-ray scattering. The results reveal sequence-dependent differences among the same length strands, but the trends in the differences are not correlated to the migration order of the strands in the CZE separation. They also indicate that the separation is based on intrinsic differences among the strands that do not change with increasing ionic strength; rather, increasing ionic strength has a greater effect on electroosmotic mobility in the normal direction than on electrophoretic mobility of the strands in the reverse direction. This increases the migration time of the strands in the normal direction, allowing more time for the same-length strands to be teased apart based on very small differences in the intrinsic properties of the strands of different sequence. Regression analysis was used to model the intrinsic differences among DNA strands in order to gain insight into the relationship between mobility and sequence that underlies the separation.     

A technique for capillary joining in capillary electrophoresis

Summary Aspects of cracking and joining capillaries have been investigated. Capillary coupling was achieved using various methods. The most successful used hydrofluoric acid-etched capillaries to form male and female ends which were then joined together. This type of joint was used to connect sections of capillary of similar and different internal diameters with minimal loss in resolution, peak width and number of theoretical plates. (Uridine and hypoxanthine was used as a test mixture). For hypoxanthine on a 50 m/50 m etched joined capillary 10 cm from the detector window the number of theoretical plates was 96.6% of that for hypoxanthine on an unbroken capillary. Following the relative success of capillary joining, a coupled capillary flowcell (50 m/200 m) was produced and evaluated.     

Ultra-high concentration of amylose for chiral separations in capillary electrophoresis

In the present study, a capillary electrophoresis method using high concentration of amylose solutions as separation medium has been developed with the aid of dimethyl sulfoxide (DMSO) as co-solvent. The best buffer conditions for primaquine, trihexyphenidyl (THP), sulconazole and cetirizine enantiomers were optimized as 20 mM sodium phosphate buffer with DMSO/water (40/60, v/v) as solvent at a pH of 3.0, containing 10% (w/v) amylose. Partial-filling and semi-permanent coating techniques were used considering the influences of DMSO on UV detection. High chiral resolution for THP enantiomers was obtained showing good chiral separation capacity of this method. The method showed good linearity (R² > 0.998) over the concentration range of 0.50 and 2.00 mg L⁻¹ for all the enantiomers. The detection limits for the tested enantiomers were in the range from 0.05 to 0.12 mg L⁻¹. The linear calibration models were proven to be adequate for the experimental data by lack-of-fit test. The intra-assay precision, inter-day precision and accuracy were all evaluated to be acceptable. Separation and determination of THP enantiomers in rabbit blood were also carried out.     

Strategies for enantioseparations of catecholamines and structurally related compounds by capillary zone electrophoresis using sulfated beta-cyclodextrins as chiral selectors

Strategies for simultaneous enantioseparations of three catecholamines (DL-norepinephrine, DL-epinephrine, and DL-isoproterenol) and three structurally related compounds (DL-octopamine, DL-synephrine, and DL-norephedrine) by CZE using sulfated beta-CDs as chiral selectors were investigated. Four different separation modes were attempted: (I) using randomly sulfate-substituted beta-CD (MI-S-beta-CD) at relatively low concentrations in a high-concentration phosphate buffer at low pH in the normal polarity mode, (II) using MI-S-beta-CD at high concentrations at low pH in the reversed polarity mode, (III) using MI-S-beta-CD at moderately high concentrations in a phosphate buffer at neutral pH in the normal polarity mode, and (IV) using the single isomer heptakis(2,3-dihydroxy-6-O-sulfo)-beta-CD (SI-S-beta-CD) at low to moderately high concentrations in a high-concentration BGE at low pH in the normal polarity mode. Among them, enantioseparation of these cationic solutes was best achieved under the conditions of mode (II). In mode (II) and mode (III), temperature is an important factor affecting the enantioresolution of norepinephrine. In mode (I) and mode (IV), the use of a high-concentration BGE (150-200 mM) is crucial for effective enantioseparation of these cationic solutes with sulfated beta-CDs. Comparative studies of enantioseparations of these cationic solutes with MI-S-beta-CD and SI-S-beta-CD reveal that the sulfate substituents of MI-S-beta-CD located at the C(2)- position interact strongly with the diol moiety of catecholamines.     

Chiral metal-organic cages used as stationary phase for enantioseparations in capillary electrochromatography

Since some metal-organic cages (MOCs) have been synthesized in past several years, the applications of MOCs such as drug delivery, molecular recognition, separation, catalysis, and gas storage, etc. have been witnessed with a significant increase. However, to the best of our knowledge, so far no one has used MOCs as chiral stationary phase to separate chiral compounds in CEC. In this study, three MOCs were developed as the stationary phase for CEC separation of enantiomers. The MOCs coated capillary column showed good chiral recognition ability for some chiral compounds, including amine, alcohols, ketone, etc. The influence of buffer concentration, applied voltage, pH of buffer solution on the chiral separations was also investigated. The RSDs of run-to-run, day-to-day, and column-to-column for retention time were 2.1-4.67%, 1.2-4.36%, and 3.62-6.43%, respectively. This work reveals that the chiral MOCs material is feasible for the enantioseparation in CEC.