Convenient and efficient FRET platform featuring a rigid biphenyl spacer between rhodamine and BODIPY: transformation of 'turn-on' sensors into ratiometric ones with dual emission

We have connected a borondipyrromethene (BODIPY) donor to the 5′ position of a tetramethylrhodamine (TMR) acceptor to form a high efficiency (over 99 %) intramolecular fluorescence resonance energy transfer (FRET) cassette, BODIPY–rhodamine platform (BRP). While the good spectral overlap between the emission of BODIPY and the absorption of TMR was one favorable factor, another feature of this FRET system was the rigid and short biphenyl spacer that favored efficient through‐bond energy transfer. More importantly, in this system, the 2′‐carboxyl group of the rhodamine unit was preserved for the further modifications, which was as convenient as those carbonyl groups on the original rhodamines without connection to donors. For this reason, BRP is clearly differentiated from the previous ratiometric sensors based on donor rhodamine systems. To illustrate its value as a versatile platform, we introduced typical Hg²⁺ receptors into BRP, through convenient one‐pot reactions on the 2′‐carboxyl group, and successfully developed two ratiometric sensors, BRP‐1 and BRP‐2, with different spirocyclic receptors that recognized Hg²⁺ on different reaction mechanisms. Upon excitation at a single wavelength (488 nm), at which only BODIPY absorbed, both of the FRET sensors exhibited clear Hg²⁺‐induced changes in the intensity ratio of the two strong emission bands of BODIPY and rhodamine. It should be noted that these ratiometric Hg²⁺ sensors exhibited excellent sensitivity and selectivity Hg²⁺, as well as pH insensitivity, which was similar to the corresponding ‘turn‐on’ rhodamine sensors. While both ratiometric probes were applicable for Hg²⁺ imaging in living cells, BRP‐1 exhibited higher sensitivity and faster responses than BRP‐2. Our investigation indicated that on a versatile platform, such as BRP, a large number of highly efficient ratiometric sensors for transition‐metal ions could be conveniently developed.     

基于T-T碱基错配的荧光传感器特异性检测汞离子

在本文中,我们研制了一种基于T-T碱基错配特异性键合汞离子的荧光传感器用于汞离子的检测。该传感器由两条分别标记了荧光基团（F）和淬灭基团（Q）的DNA探针组成,并且含有两对用于结合汞离子的T-T错配碱基。当汞离子存在时,两条探针之间形成T-Hg2+-T结构,作用力增强,从而拉近了荧光基团与淬灭基团之间的距离,发生能量转移,使荧光信号在一定程度上被淬灭。在优化的条件下,我们使用该传感器对汞离子进行检测,动力学响应范围为50nM到1000nM,线性相关方程为y= 5281.13 - 1650.56 lg[Hg2+] ( R2 = 0.985),检测下限为79nM。此外,我们还考察了该传感器的选择性,当用其它干扰离子（浓度都为1.0µM）代替待测离子进行实验时,没有发生明显的荧光淬灭,说明该传感器具有较高的选择性。该传感器的构建为汞离子的检测提供了一条快速、简便的新途径。     

FRET‐based Fluorescent and Colorimetric Probe for Selective Detection of Hg(II) and Cu(II) with Dual‐mode

A dual‐function fluorescence resonance energy transfer (FRET)‐based fluorescent and colorimetric probe was rationally fabricated from an energy donor coumarin moiety and an energy acceptor rhodamine moiety linked by a thiohydrazide arm for selective detection of Hg²⁺ and Cu²⁺. Two distinct mechanisms were used for the selective detection. Results revealed that probe 1 showed high fluorescent selectivity towards Hg²⁺ and evident colorimetric selectivity for Cu²⁺, which was suitable for ‘naked‐eye’ detection.     

Silole‐Infiltrated Photonic Crystal Films as Effective Fluorescence Sensor for Fe3+ and Hg2+

We develop a highly effective silole‐infiltrated photonic crystal (PC) film fluorescence sensor with high sensitivity, good selectivity and excellent reproducibility for Fe³⁺ and Hg²⁺ ions. Hexaphenylsilole (HPS) infiltrated PCs show amplified fluorescence due to the slow photon effect of PC because the emission wavelength of HPS is at the blue band edge of the selected PC’s stopband. The fluorescence can be quenched significantly by Fe³⁺/Hg²⁺ ions owing to electron transfer between HPS and metal ions. The amplified fluorescence enhances the sensitivity of detection, with a detection limit of 5 nM for Fe³⁺/Hg²⁺ ions. The sensor is negligibly responsive to other metal ions and can easily be reproduced by rinsing with pure water due to the special surface wettability of PC. As a result, a highly effective Fe³⁺/Hg²⁺ ions sensor based on HPS‐infiltrated PC film has been achieved, which will be important for effective and practical detection of heavy metal ions.     

A Highly Selective Colorimetric and Fluorescent Probe for Cu2+ and Hg2+ Ions Based on a Distyryl BODIPY with Two Bis(1,2,3‐triazole)amino Receptors

A new distyryl boron dipyrromethene (BODIPY) with two bis(1,2,3‐triazole)amino substituents has been prepared by typical Knoevenagel condensation followed by click reaction. The compound selectively binds to Cu²⁺ and Hg²⁺ ions in CH₃CN/H₂O (1:1 v/v) to give remarkably blueshifted electronic absorption and fluorescence bands as a result of inhibition of the intramolecular charge‐transfer process upon binding to these metal ions. The color changes can be easily seen by the naked eye. The binding stoichiometry between this probe and Cu²⁺ ions has been determined to be 1:2 by a Job plot of the fluorescence data with a binding constant of ((6.2±0.6)×10⁹) M ^?2. The corresponding value for Hg²⁺ ions is about sixfold smaller.     

Integration of the 1,2,3‐Triazole “Click” Motif as a Potent Signalling Element in Metal Ion Responsive Fluorescent Probes

In a systematic approach we synthesized a new series of fluorescent probes incorporating donor–acceptor (D‐A) substituted 1,2,3‐triazoles as conjugative π‐linkers between the alkali metal ion receptor N‐phenylaza‐[18]crown‐6 and different fluorophoric groups with different electron‐acceptor properties (4‐naphthalimide, meso‐phenyl‐BODIPY and 9‐anthracene) and investigated their performance in organic and aqueous environments (physiological conditions). In the charge‐transfer (CT) type probes 1 , 2 and 7 , the fluorescence is almost completely quenched by intramolecular CT (ICT) processes involving charge‐separated states. In the presence of Na⁺ and K⁺ ICT is interrupted, which resulted in a lighting‐up of the fluorescence in acetonitrile. Among the investigated fluoroionophores, compound 7 , which contains a 9‐anthracenyl moiety as the electron‐accepting fluorophore, is the only probe which retains light‐up features in water and works as a highly K⁺/Na⁺‐selective probe under simulated physiological conditions. Virtually decoupled BODIPY‐based 6 and photoinduced electron transfer (PET) type probes 3 – 5 , where the 10‐substituted anthracen‐9‐yl fluorophores are connected to the 1,2,3‐triazole through a methylene spacer, show strong ion‐induced fluorescence enhancement in acetonitrile, but not under physiological conditions. Electrochemical studies and theoretical calculations were used to assess and support the underlying mechanisms for the new ICT and PET 1,2,3‐triazole fluoroionophores.     

Turn‐on fluorogenic and chromogenic detection of cations in complete water media with poly(N‐vinyl pyrrolidone) bearing rhodamine B derivatives as polymeric chemosensor

A hydrophobic organic monomer GRBE with a polymerizable methacrylester moiety had been synthesized by reaction of rhodamine B‐ethanediamine with glycidyl methacrylate. A water‐soluble polymeric chemosensor poly(VP‐GRBE) had been prepared via copolymerization with a hydrophilic comonomer (vinylpyrrolidone) and GRBE, which was able to sense environmentally poisonous cations in completely aqueous media. The chemosensor was a derivative of rhodamine B, which behaved as a fluorescent and chromogenic sensor toward various heavy cations, particularly Cr³⁺, Fe³⁺, and Hg²⁺. Titration curves of Cr³⁺, Fe³⁺, and Hg²⁺ were constructed using rapid, cheap, and widely available technique of fluorescence spectroscopies. The detection limits for Cr³⁺, Fe³⁺, or Hg²⁺ ions were found to be 2.20 × 10^?12, 2.39 × 10^?12, and 1.11 × 10^?12 mol/l in the same medium, respectively. Moreover, a colorimetric response from the polymeric chemosensor permitted the detection of Cr³⁺, Hg²⁺, or Fe³⁺ by “naked eye” because of the development of a pink or brown yellow color when Cr³⁺, Hg²⁺, or Fe³⁺ cations interacted with the copolymer in aqueous media. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly Selective and Responsive Visible to Near‐IR Ytterbium Emissive Probe for Monitoring Mercury(II)

A new lanthanide probe based on the fluorescence resonance energy transfer (FRET) process with the combination of ytterbium porphyrinate complex and a rhodamine B derivative unit was synthesized to detect the Hg²⁺ ion with responsive emission in the visible and near‐IR region with a detection limit of 10 μM     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

Selective detection of Hg2+ ion in aqueous medium with the use of 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one‐functionalized SBA‐15

An isatin‐based fluorophore, 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one, was grafted on a large‐pore mesoporous silica material (SBA‐15) via a two‐step modification process. The obtained material (SBA‐Is‐Py) was characterized using various techniques and the characterization showed that the ordered porous structure was preserved after the post‐grafting procedure. The optical sensing ability of SBA‐Is‐Py was studied upon the addition of a variety of metal ions and a marked fluorescence quenching by Hg²⁺ ion was observed. SBA‐Is‐Py exhibited excellent Hg²⁺‐specific luminescence quenching over various competing cations. Furthermore, linear changes of the optical properties of SBA‐Is‐Py as a function of the concentrations of Hg²⁺ ion were found, with a calculated detection limit of 3.28 × 10^?7 M. In addition, SBA‐Is‐Py was successfully employed for the determination of Hg²⁺ in real water samples.     

A new BODIPY-based fluorescent “turn-on” probe for highly selective and rapid detection of mercury ions

A new fluorescent sensor based on the BODIPY fluorophore and the carboxyl-thiol metal bonding receptor for Hg²⁺ was designed and synthesized. The sensor is highly selective for Hg²⁺ (about 630-fold fluorescence enhancement) over relevant competing metal ions, sensitive to ppb levels of Hg²⁺ (with detection limit of 5.7?nM), and fast response toward Hg²⁺ (within 30?s) in aqueous solution.     

Ultrasensitive Silicon Nanoparticle Ratiometric Fluorescence Determination of Mercury(II)

A novel ratiometric fluorescence sensing system for the ultrasensitive detection of Hg²⁺ was developed. It used aminofunctionalized silicon nanoparticles and rhodamine B, which exhibit two distinct fluorescence emission peaks at 449 and 581?nm, respectively, under a single excitation wavelength (350?nm). The fluorescence of the amino-functionalized silicon nanoparticles was selectively quenched by Hg²⁺, while that of rhodamine B was insensitive to Hg²⁺. The ratio of fluorescence intensities at 449–581?nm linearly decreased with increasing concentrations of Hg²⁺ from 0.005–0.1 and 0.1–7?µM within 0.5?min, and a detection limit as low as 3.3?nM was achieved. Moreover, the ratiometric fluorescence sensing system exhibited good selectivity toward Hg²⁺ over other metal ions with relatively low background interference, even in a complex matrix such as lake water. Most importantly, the practical use of this sensing system for Hg²⁺ detection in real water samples was also demonstrated.     

A Highly Copper‐Selective Ratiometric Fluorescent Sensor Based on BODIPY

A new ratiometric fluorescent sensor ( 1 ) for Cu²⁺ based on 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) with di(2‐picolyl)amine (DPA) as ion recognition subunit has been synthesized and investigated in this work. The binding abilities of 1 towards different metal ions such as alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺) and other metal ions ( Ba²⁺, Zn²⁺, Cd²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Ni²⁺, Co²⁺, Hg²⁺, Ag⁺) have been examined by UV‐vis and fluorescence spectroscopies. 1 displays high selectivity for Cu²⁺ among all test metal ions and a ～10‐fold fluorescence enhancement in I₅₈₂/I₅₅₈ upon excitation at visible excitation wavelength. The binding mode of 1 and Cu²⁺ is a 1:1 stoichiometry determined via studies of Job plot, the nonlinear fitting of the fluorometric titration and ESI mass.     

A Highly Selective and Turn‐on Fluorescent Probe for Fe3+ Ion Based on Perylene Tetracarboxylic Diimide

We have demonstrated a turn‐on fluorescent sensor 6 for detection of Fe³⁺ based on photo‐induced electron transfer (PET) mechanism. The probe comprises a perylene tetracarboxylic diimide (PDI) fluorophore and two bis((1,2,3‐triazol‐4‐yl)methyl)amine (DTA) moieties as the metal ion receptors. It exhibits high selectivity toward Fe³⁺ over various other metal ions in CH₃CN/H₂O (1:1, V/V). The binding stoichiometry for 6 ‐Fe³⁺ complexes has been determined to be 1:2 by a Job plot of fluorescence. The association constant between 6 and Fe³⁺ was estimated to be 1.04×10¹⁰ (mol/L)^?2 by Benesi‐Hildebrand equation.     

Energy Transfer in Aminonaphthalimide‐Boron‐Dipyrromethene (BODIPY) Dyads upon One‐ and Two‐Photon Excitation: Applications for Cellular Imaging

Aminonaphthalimide–BODIPY energy transfer cassettes were found to show very fast (k_EET≈10¹⁰–10¹¹ s^?1) and efficient BODIPY fluorescence sensitization. This was observed upon one‐ and two‐photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In comparison with the direct excitation of the BODIPY chromophore, the two‐photon absorption cross‐section δ of the dyads is significantly incremented by the presence of the aminonaphthalimide donor [δ≈10 GM for the BODIPY versus 19–26 GM in the dyad at λ_exc=840 nm; 1 GM (Goeppert–Mayer unit)=10^?50 cm⁴ s molecule^?1 photon^?1]. The electronic decoupling of the donor and acceptor, which is a precondition for the energy transfer cassette concept, was demonstrated by time‐dependent density functional theory calculations. The applicability of the new probes in the one‐ and two‐photon excitation mode was demonstrated in a proof‐of‐principle approach in the fluorescence imaging of HeLa cells. To the best of our knowledge, this is the first demonstration of the merging of multiphoton excitation with the energy transfer cassette concept for a BODIPY‐containing dyad.     

Lighting‐Up of the Dye Malachite Green with Mercury(II)–DNA and Its Application for Fluorescence Turn‐Off Detection of Cysteine and Glutathione

This work describes a novel strategy for the highly sensitive and selective detection of cysteine (Cys) and glutathione (GSH) based on the Hg²⁺–AGRO100–malachite green (MG) complex system. The dye MG, which has a very low quantum yield in aqueous solution by itself, can bind with the thymine‐rich DNA AGRO100 in the presence of Hg²⁺ ions to generate a striking fluorescence intensity enhancement of 1000‐fold. As sulfur‐containing amino acids, Cys and GSH effectively sequester Hg²⁺ ions from the Hg²⁺–AGRO100–MG complex structure to switch the ‘lit‐up’ chemosensor to the ‘off’ state (about a 50‐fold fluorescence intensity decrease), thus providing a facile, but effective, method to probe for Cys/GSH. The fluorescence titration, UV absorption, CD, and Raman spectra provide some insight into the structural and chemical basis for the enhancement effect. The formation of the Hg²⁺–AGRO100–MG complex significantly affects the electronic structure and conformation of the MG molecule by leading to an extended π system, which is the likely origin of the observed striking fluorescence intensity enhancement. Notably, the proposed sensing platform exhibits exquisite selectivity and sensitivity toward Cys/GSH with limits of detection of 5 nM for Cys and 10 nM for GSH, respectively. Furthermore, the straightforward assay design avoids labeling of the probe, uses only commercially available materials, and still displays comparable sensitivity and excellent selectivity.     

Test‐Strip‐Based Fluorometric Detection of Fluoride in Aqueous Media with a BODIPY‐Linked Hydrogen‐Bonding Receptor

The measurement of biologically relevant anions, such as fluoride, is an important task in analytical chemistry, in particular, for dental health and osteoporosis. Although a large number of fluoride probes are known, the applicability under relevant conditions is limited to a few examples. To improve this situation, BODIPY‐amidothiourea dyes with varying hydrogen‐bond donating strengths were developed, the most H‐acidic of which ( 1 c ) could detect F^? from an inorganic source (NaF) in 50 % aqueous solution (DMSO/water 1:1, v/v) with 0.01 ppm sensitivity through selective fluorescence quenching by a photoinduced electron‐transfer (PET) process. Use of the probe and a reference dye with a test‐strip assay and a portable and rapidly recording lateral‐flow fluorescence reader made determination of F^? in neat aqueous solutions, such as spiked water samples and toothpaste extracts, possible in a self‐referenced manner, achieving a detection limit of 0.2 ppm.     

Polymer‐based colorimetric and “turn off” fluorescence sensor incorporating benzo[2,1,3]thiadiazole moiety for Hg2+ Detection

A conjugated polymer was synthesized by the polymerization of 4,7‐dibromobenzo[2,1,3]thiadiazole ( M‐1 ) with tri{1,4‐diethynyl‐2,5‐bis(2‐(2‐methoxyethoxy)‐ethoxy)}‐benzene ( M‐2 ) via Pd‐catalyzed Sonogashira reaction. The polymer shows strong orange fluorescence. The responsive optical properties of the polymer on various metal ions were investigated through photoluminescence and UV–vis absorption measurements. The polymer displays highly sensitive and selective on‐off Hg²⁺ fluorescence quenching property in tetrahydrofuran solution in comparison with the other cations including Mg²⁺, Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, and Pb²⁺. More importantly, the fluorescent color of the polymer sensor disappears after addition of Hg²⁺, which could be easily detected by naked eyes. The results indicate that this kind of polymer sensor incorporating benzo[2,1,3]thiadiazole moiety as a ligand can be used as a novel colorimetric and fluorometric sensor for Hg²⁺ detection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Exploring the interactions between gold nanoparticles and analytes through surface‐assisted laser desorption/ionization mass spectrometry

Surface‐assisted laser desorption/ionization mass spectrometry (SALDI‐MS) is applied to provide strong evidence for the chemical reactions of functionalized gold nanoparticles (Au NPs) with analytes – Hg²⁺ ions induced MPA?Au NPs aggregation in the presence of 2,6‐pyridinedicarboxylic acid (PDCA) and H₂O₂ induced fluorescence quenching of 11‐MUA?Au NDs. PDCA‐Hg²⁺‐MPA coordination is responsible for Au NPs aggregation, while the formation of 11‐MUA disulfide compounds that release into the bulk solution is responsible for H₂O₂‐induced fluorescence quenching. In addition to providing information about the chemical structures, SALDI‐MS is also selective and sensitive for the detection of Hg²⁺ ions and H₂O₂. The limits of detection (LODs) for Hg²⁺ ions and H₂O₂ by SALDI‐MS were 300 nM and 250 µM, respectively. The spot‐to‐spot variations in the two studies were both less than 18% (50 sample spots). Our results reveal that SALDI‐MS can be used to study analyte‐induced changes in the surface properties of nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.     

Detection and Removal of Metal Ion based on a Fluorescent Sensor Composed of a Photoresponsive Rhodamine Derivative by Host–Gust Interaction

Although a variety of chemosensors as probes have been exploited for the detection of metal ions with high sensitivity and selectivity, the formed probe–metal complex was hardly suitable for separation, removal, and further recovery. This paper presents a method to detect and remove metal ions from aqueous solutions simultaneously by a fluorescence chemosensor and functional magnetic nanoparticles. A novel probe SRhB ‐Azo was synthesized based on rhodamine B (RhB ), maleic anhydride (MAH ), and azobenzene (Azo). SRhB ‐Azo showed high selectivity and sensitivity to Hg ions in aqueous solutions. Job's experiment showed the formation of a 1:2 stoichiometry complex between Hg²⁺ and SRhB ‐Azo. Moreover, β‐cyclodextrin (β‐CD )‐modified magnetic nanoparticles (CD‐MNPs ) were fabricated and used as host materials to form the inclusion complex CD–MNP and SRhB ‐Azo–Hg²⁺. Then, the SRhB ‐Azo‐Hg²⁺ complex could be removed by an external magnet, and subsequently recovered by UV ‐irradiation‐induced trans/cis isomerization of the Azo groups. The CD‐MNP s could be reused for nearly four times. Thus, the SRhB ‐Azo probe and CD‐MNP system has great potential application in sewage treatment.