Microwave‐Assisted Heterogeneous Cross‐Coupling Reactions Catalyzed by Nickel‐in‐Charcoal (Ni/C)

A study involving the relatively rare combination of heterogeneous catalysis conducted under microwave conditions is presented. Carbon–carbon bond formation, including Negishi and Suzuki couplings, can be quickly effected with aryl chloride partners by using a base metal (nickel) adsorbed in the pores of activated charcoal. Aminations were also studied, along with cross‐couplings of vinyl alanes with benzylic chlorides as a means to stereodefined allylated aromatics. Reaction times for all these processes are typically reduced from several hours to minutes in a microwave reactor.     

Synthesis of Phenols: Organophotoredox/Nickel Dual Catalytic Hydroxylation of Aryl Halides with Water

A highly effective hydroxylation reaction of aryl halides with water under synergistic organophotoredox and nickel catalysis is reported. The OH group of the resulting phenols originates from water, following deprotonation facilitated by an intramolecular base group on the ligand. Significantly, aryl bromides as well as less reactive aryl chlorides served as effective substrates to afford phenols with a wide range of functional groups. Without the need for a strong inorganic base or an expensive noble‐metal catalyst, this process can be applied to the efficient preparation of diverse phenols and enables the hydroxylation of multifunctional pharmaceutically relevant aryl halides.     

Efficient Noble‐Metal‐Free Catalysts Supported by Three‐Dimensional Ordered Hierarchical Porous Carbon

Development of heterogeneous catalysts has attracted increasing attention, owing to their remarkable catalytic performance and recyclability. Herein, we report well‐developed heterogeneous catalysts with a three‐dimensional ordered hierarchical structure, constructed from nickel or cobalt nanoparticles embedded in porous carbon. The obtained catalysts were fully characterized by several techniques. On account of the uniform distribution of metal nanoparticles in the porous carbon matrix and large diffusion channels that allow for effective mass transport, the catalysts exhibited superior catalytic performance for styrene epoxidation reaction. In particular, the catalysts showed good catalytic activity, high selectivity and excellent recyclability toward the styrene epoxidation. Thus, this facile approach developed allows for fabricating advanced heterogeneous catalysts with high catalytic activities for useful practical applications.     

Visible‐Light‐Promoted Nickel‐ and Organic‐Dye‐Cocatalyzed Formylation Reaction of Aryl Halides and Triflates and Vinyl Bromides with Diethoxyacetic Acid as a Formyl Equivalent

A simple formylation reaction of aryl halides, aryl triflates, and vinyl bromides under synergistic nickel‐ and organic‐dye‐mediated photoredox catalysis is reported. Distinct from widely used palladium‐catalyzed formylation processes, this reaction proceeds by a two‐step mechanistic sequence involving initial in situ generation of the diethoxymethyl radical from diethoxyacetic acid by a 4CzIPN‐mediated photoredox reaction. The formyl‐radical equivalent then undergoes nickel‐catalyzed substitution reactions with aryl halides and triflates and vinyl bromides to form the corresponding aldehyde products. Significantly, besides aryl bromides, less reactive aryl chlorides and triflates and vinyl halides serve as effective substrates for this process. Since the mild conditions involved in this reaction tolerate a plethora of functional groups, the process can be applied to the efficient preparation of diverse aromatic aldehydes.     

A convenient and practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with formic acid as carbon monoxide source

A practical heterogeneous palladium‐catalyzed carbonylative Suzuki coupling of aryl iodides with arylboronic acids under carbon monoxide gas‐free conditions has been developed using a bidentate phosphino‐functionalized magnetic nanoparticle‐immobilized palladium(II) complex as catalyst. Formic acid was utilized as the carbon monoxide source with dicyclohexylcarbodiimide as the activator, and a wide variety of biaryl ketones were generated in moderate to high yields. The new heterogeneous palladium catalyst can be prepared via a simple procedure and can easily be separated from a reaction mixture by simply applying an external magnet and recycled up to 10 times without any loss of activity.     

A Porous Organic Poly(triphenylimidazole) Decorated with Palladium Nanoparticles for the Cyanation of Aryl Iodides

A new porous organic poly(triphenylimidazole), PTPI‐Me, was prepared through a Yamamoto self‐coupling reaction of 2,4,5‐tris‐(4‐bromophenyl)‐1‐methyl‐1H‐imidazole (TPI‐Me) in the presence of bis(1,5‐cyclooctadiene)nickel(0). The polymer was subsequently decorated with Pd nanoparticles (NPs) to afford a heterogeneous cyanation catalyst, Pd@PTPI‐Me. Pd NPs with an average diameter of 2.7 nm were grown within the PTPI‐Me framework, owing to the coordination of the imidazole rings to the Pd species. The resultant Pd@PTPI‐Me catalyst, with a Pd loading of 0.13 mmol g^?1, exhibited superior catalytic activity for the cyanation of aryl iodides. More importantly, the heterogeneous catalyst was also readily recycled and displayed negligible deactivation after five cycles.     

Synthesis of tetraarylmethanes via a Friedel-Crafts cyclization/desulfurization strategy

Tetraarylmethanes are an important class of molecules that contain four aryl groups bonded to a central carbon atom. The shape/three-dimensionality of these molecules makes them suitable for organic light-emitting diodes (OLEDs), organic solar cells, hydrogen storage, and even drug-delivery. Despite their importance, there are only a few methods available for their preparation. Herein, we report a simple procedure for the preparation of tetraarylmethanes that involves a bismuth-catalyzed Friedel-Crafts cyclization followed by a desulfurization reaction mediated by Raney nickel.     

Inserting CO2 into Aryl C−H Bonds of Metal–Organic Frameworks: CO2 Utilization for Direct Heterogeneous C−H Activation

Described for the first time is that carbon dioxide (CO₂) can be successfully inserted into aryl C?H bonds of the backbone of a metal–organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO₂ for heterogeneous C?H activation and carboxylation reactions on MOFs, and opens a new avenue for CO₂ chemical transformations under mild reaction conditions.     

Synthesis of Non‐Classical Arylated C‐Saccharides through Nickel/Photoredox Dual Catalysis

The development of synthetic tools to introduce saccharide derivatives into functionally complex molecules is of great interest, particularly in the field of drug discovery. Herein, we report a new route toward highly functionalized, arylated saccharides, which involves nickel‐catalyzed cross‐coupling of photoredox‐generated saccharyl radicals with a range of aryl‐ and heteroaryl bromides, triggered by an organic photocatalyst. In contrast to existing methods, the mild reaction conditions achieve arylation of saccharide motifs while leaving the anomeric carbon available, thus providing access to a class of arylated glycosides that has been underexplored until now. To demonstrate the potential of this strategy in late‐stage functionalization, a variety of structurally complex molecules incorporating saccharide moieties were synthesized.     

Triarylborane‐Catalyzed Alkenylation Reactions of Aryl Esters with Diazo Compounds

Herein we report a facile, mild reaction protocol to form carbon–carbon bonds in the absence of transition metal catalysts. We demonstrate the metal‐free alkenylation reactions of aryl esters with α‐diazoesters to give highly functionalized enyne products. Catalytic amounts of tris(pentafluorophenyl)borane (10–20 mol %) are employed to afford the C=C coupled products (31 examples) in good to excellent yields (36–87 %). DFT studies were used to elucidate the mechanism for this alkenylation reaction.     

Co (II)‐C12 alkyl carbon chain multi‐functional ionic liquid immobilized on nano‐SiO2 nano‐SiO2@CoCl3‐C12IL as an efficient cooperative catalyst for C–H activation by direct acylation of aryl halides with aldehydes

Nano‐silica supported ionic liquids composed of alkyl carbon chain and transition metal chlorides anions have been prepared and successfully applied as a heterogeneous catalyst in the direct aldehyde C‐H activation. Catalytic results indicated that nano‐SiO₂ supported ionic liquid consisting C12 alkyl carbon chain and CoCl₃ anion nano‐SiO₂@CoCl₃‐C12IL showed excellent catalytic properties with good to excellent yields towards the desired aryl ketones. The excellent recyclability of the supported catalyst, mild reaction conditions, low catalyst loading, and operational simplicity are the important features of this methodology.     

Nitrogen Photofixation over III‐Nitride Nanowires Assisted by Ruthenium Clusters of Low Atomicity

In many heterogeneous catalysts, the interaction of supported metal species with a matrix can alter the electronic and morphological properties of the metal and manipulate its catalytic properties. III‐nitride semiconductors have a unique ability to stabilize ultra‐small ruthenium (Ru) clusters (ca. 0.8 nm) at a high loading density up to 5 wt %. n‐Type III‐nitride nanowires decorated with Ru sub‐nanoclusters offer controlled surface charge properties and exhibit superior UV‐ and visible‐light photocatalytic activity for ammonia synthesis at ambient temperature. A metal/semiconductor interfacial Schottky junction with a 0.94 eV barrier height can greatly facilitate photogenerated electron transfer from III‐nitrides to Ru, rendering Ru an electron sink that promotes N≡N bond cleavage, and thereby achieving low‐temperature ammonia synthesis.     

Atomically Dispersed Metal Sites in MOF‐Based Materials for Electrocatalytic and Photocatalytic Energy Conversion

Metal sites play an essential role in both electrocatalytic and photocatalytic energy conversion. The highly ordered arrangements of the organic linkers and metal nodes as well as the well‐defined pore structures of metal‐organic frameworks (MOFs) make them ideal substrates to support atomically dispersed metal sites (ADMSs) located in their metal nodes, linkers, and pores. Porous carbon materials doped with ADMSs can be derived from these ADMS‐incorporating MOF precursors through controlled treatments. These ADMSs incorporated in pristine MOFs and MOF‐derived carbon materials possess unique advantages over molecular or bulk metal‐based catalysts and bridge the gap between homogeneous and heterogeneous catalysts for energy‐conversion applications. This Review presents recent progress in the design and incorporation of ADMSs in MOFs and MOF‐derived materials for energy‐conversion applications.     

Synthesis of Acylphosphonates by a Palladium‐Catalyzed Phosphonocarbonylation Reaction of Aryl Iodides with Phosphites

Acylphosphonates are conveniently synthesized from aryl iodides by a palladium‐catalyzed reaction with dialkyl phosphites under an atmospheric pressure of carbon monoxide. The reaction demonstrates the first example of the use of phosphorus nucleophiles in related metal‐catalyzed carbonylation reactions.     

Carboxylic acids as substrates in homogeneous catalysis

In organic molecules carboxylic acid groups are among the most common functionalities. Activated derivatives of carboxylic acids have long served as versatile connection points in derivatizations and in the construction of carbon frameworks. In more recent years numerous catalytic transformations have been discovered which have made it possible for carboxylic acids to be used as building blocks without the need for additional activation steps. A large number of different product classes have become accessible from this single functionality along multifaceted reaction pathways. The frontispiece illustrates an important reason for this: In the catalytic cycles carbon monoxide gas can be released from acyl metal complexes, and gaseous carbon dioxide from carboxylate complexes, with different organometallic species being formed in each case. Thus, carboxylic acids can be used as synthetic equivalents of acyl, aryl, or alkyl halides, as well as organometallic reagents. This review provides an overview of interesting catalytic transformations of carboxylic acids and a number of derivatives accessible from them in situ. It serves to provide an invitation to complement, refine, and use these new methods in organic synthesis.     

Oxidation of Organosilanes with Nanoporous Copper as a Sustainable Non‐Noble‐Metal Catalyst

Although many noble‐metal catalysts have been used for the oxidation of organosilanes, there has been less success with non‐noble‐metal catalysts. Here, unsupported nanoporous copper (np‐Cu) is used to catalyze the oxidation of organosilanes under mild conditions. It is the first time that this reaction has been achieved with a heterogeneous copper catalyst with high activity and selectivity. Both water and alcohols are used as oxidants and the corresponding organosilanols and organosilyl ethers are obtained in high yield. The possible mechanism was obtained by kinetic studies. The catalyst could be reused at least five times without evident loss of activity. As a novel green catalyst np‐Cu should play a unique role in organic synthesis.     

Nickel‐Catalyzed Cross‐Coupling Reactions of o‐Carboranyl with Aryl Iodides: Facile Synthesis of 1‐Aryl‐o‐Carboranes and 1,2‐Diaryl‐o‐Carboranes

A nickel‐catalyzed arylation at the carbon center of o‐carborane cages has been developed, thus leading to the preparation of a series of 1‐aryl‐o‐carboranes and 1,2‐diaryl‐o‐carboranes in high yields upon isolation. This method represents the first example of transition metal catalyzed C,C′‐diarylation by cross‐coupling reactions of o‐carboranyl with aryl iodides.     

Nickel‐Catalyzed Cross‐Electrophile Coupling with Organic Reductants in Non‐Amide Solvents

Cross‐electrophile coupling of aryl halides with alkyl halides has thus far been primarily conducted with stoichiometric metallic reductants in amide solvents. This report demonstrates that the use of tetrakis(dimethylamino)ethylene (TDAE) as an organic reductant enables the use of non‐amide solvents, such as acetonitrile or propylene oxide, for the coupling of benzyl chlorides and alkyl iodides with aryl halides. Furthermore, these conditions work for several electron‐poor heterocycles that are easily reduced by manganese. Finally, we demonstrate that TDAE addition can be used as a control element to ‘hold’ a reaction without diminishing yield or catalyst activity.     

Transition‐Metal‐Catalyzed CS Bond Coupling Reaction

Sulfur‐containing molecules such as thioethers are commonly found in chemical biology, organic synthesis, and materials chemistry. While many reliable methods have been developed for preparing these compounds, harsh reaction conditions are usually required in the traditional methods. The transition metals have been applied in this field, and the palladium‐catalyzed coupling of thiols with aryl halides and pseudo halides is one of the most important methods in the synthesis of thioethers. Other metals have also been used for the same purpose. Here, we summarize recent efforts in metal‐catalyzed C? S bond cross‐coupling reactions, focusing especially on the coupling of thiols with aryl‐ and vinyl halides based on different metals.     

Metal‐Free Carbonylations by Photoredox Catalysis

The synthesis of benzoates from aryl electrophiles and carbon monoxide is a prime example of a transition‐metal‐catalyzed carbonylation reaction which is widely applied in research and industrial processes. Such reactions proceed in the presence of Pd or Ni catalysts, suitable ligands, and stoichiometric bases. We have developed an alternative procedure that is free of any metal, ligand, and base. The method involves a redox reaction driven by visible light and catalyzed by eosin Y which affords alkyl benzoates from arene diazonium salts, carbon monoxide, and alcohols under mild conditions. Tertiary esters can also be prepared in high yields. DFT calculations and radical trapping experiments support a catalytic photoredox pathway without the requirement for sacrificial redox partners.