One‐Pot Synthesis of Carbon‐Supported Dendritic Pd‐Au Nanoalloys for Electrocatalytic Ethanol Oxidation

One‐pot synthesis of carbon‐supported Pd‐Au alloy nanoparticles with well‐defined dendritic shape (Pd‐Au_den/C) was achieved by co‐reduction of K₂PdCl₄/HAuCl₄ mixtures in a molar ratio of 1:1 with hydrazine in the presence of Vulcan XC‐72R. The prepared Pd‐Au_den/C exhibited significantly enhanced performance in the electrocatalytic oxidation of ethanol compared with dendritic Pd nanoparticles and a commercial Pd/C catalyst. Pd‐Au_den/C even showed higher durability in electro‐oxidation of ethanol than the supported catalyst prepared by the deposition of presynthesized dendritic Pd‐Au nanoparticles on the carbon support. The experimental results clearly indicate that enhanced interaction between nanoparticle catalysts and carbon support through the one‐pot synthesis protocol can improve the durability of the electrocatalysts.     

Preparation of poly(styrene‐b‐N‐isopropylacrylamide) micelles surface‐linked with gold nanoparticles and thermo‐responsive ultraviolet–visible absorbance

Poly(styrene‐b‐N‐isopropylacrylamide) (PSt‐b‐PNIPAM) with dithiobenzoate terminal group was synthesized by reversible addition‐fragmentation‐transfer polymerization. The dithiobenzoate terminal group was converted into thiol terminal group with NaBH₄, resulting thiol‐terminated PSt‐b‐PNIPAM‐SH. After PSt‐b‐PNIPAM‐SH assembled into core‐shell micelles in aqueous solution, gold nanoparticles were in situ surface‐linked onto the micelles through the reduction of gold precursor anions with NaBH₄. Thus, temperature responsive core/shell micelles of PSt‐b‐PNIPAM surface‐linked with gold nanoparticles (PSt‐b‐PNIPAM‐Au micelles) were obtained. Transmission Electron Microscopy revealed the successful linkage of gold nanoparticles and the dependence of the number of gold nanoparticles per micelle on the molar ratio of HAuCl₄ to thiol group of PSt‐b‐PNIPAM. Dynamic Light Scattering analysis demonstrated thermo‐responsive behavior of PSt‐b‐PNIPAM‐Au micelles. Changing the temperature of PSt‐b‐PNIPAM‐Au micelles led to the shrinkage of PNIPAM shell and allowed to tune the distance between gold nanoparticles. Ultraviolet–visible (UV–vis) spectroscopy clearly showed the reversible modulation of UV–vis absorbance of PSt‐b‐PNIPAM‐Au micelles upon heating and cooling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5156–5163, 2007     

Immobilization of gold nanoparticles on poly(methyl methacrylate) electrospun fibers exhibiting solid‐state surface plasmon effect

In this study, the surface plasmon effect of Au nanoparticles was successfully realized in the solid state by embedding the Au nanoparticles on the surface of the transparent polymer fibers for the first time. Electrospinning a poly(methyl methacrylate) (PMMA) and HAuCl₄ mixture followed by a wet chemical reduction, the gold nanoparticles were formed on the PMMA nanocomposite electrospun fibers in a well‐distributed manner to give photostable purple color. The Au nanoparticles were all sphere shaped with an average diameter of 12 nm. Specifically, simply adjusting HAuCl₄ salt concentration in the electrospinning solution, it is able to control the electrospun fiber diameter and gold nanoparticle content in the resulting PMMA/Au nanocomposite fibers. Therefore, the developed method described herein is simple and effective for the large volume production of PMMA/Au nanocomposite fibers. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of borohydride concentration on the synthesized Au/graphene nanocomposites for direct borohydride fuel cell

Au/graphene nanocomposites are prepared via a one-pot chemical reduction process at room temperature, using graphene oxide (GO) and chloroauric acid (HAuCl₄) as precursors. The obtained Au/graphene nanocomposites are characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). TEM shows that the Au nanoparticles with size of approximately 8.7 nm disperse randomly on the surface of graphene. XPS confirms that the Au/graphene nanocomposites show a higher atomic percentage of C/O (6.3/1), in contrast to its precursor GO (2.2/1). Electrochemical studies reveal that the Au/graphene nanocomposites have electrochemically active surface area of 9.82 m² g^?1. Besides, the influence of borohydride concentration on the as-prepared Au/graphene nanocomposites is investigated in details by cyclic voltammetry, chronoamperometry, and chronopotentiometry. The results indicate that high concentration of borohydride can significantly improve the electrochemical performance of the Au/graphene catalyst.     

Fabrication of Au‐Nanoparticle/TiO2‐Nanotubes Electrodes Using Electrochemical Methods and Their Application for Electrocatalytic Oxidation of Hydroquinone

Gold nanoparticle (Au‐NPs)‐Titanium oxide nanotube (TiO₂‐NTs) electrodes are prepared by using galvanic deposition of gold nanoparticles on TiO₂‐NTs electrodes as support. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy results indicate that nanotubular TiO₂ layers consist of individual tubes of about 60–90 nm diameters and gold nanoparticles are well‐dispersed on the surface of TiO₂‐NTs support. The electrooxidation of hydroquinone of Au‐NPs/TiO₂‐NTs electrodes is investigated by different electrochemical methods. Au‐NPs/TiO₂‐NTs electrode can be used repeatedly and exhibits stable electrocatalytic activity for the hydroquinone oxidation. Also, determination of hydroquinone in skin cream using this electrode was evaluated. Results were found to be satisfactory and no matrix effects are observed during the determination of hydroquinone content of the “skin cream” samples.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.     

Formation of gold nanoparticles in diblock copolymer micelles with various reducing agents

Gold nanoparticles (Au NPs) were prepared by the reduction of HAuCl₄ acid incorporated into the polar core of poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) copolymer micelles dissolved in toluene. The formation of Au NPs was controlled using three reducing agents with different strengths: hydrazine (HA), triethylsilane (TES), and potassium triethylborohydride (PTB). The formation of Au NPs was followed by transmission electron microscopy, UV–Vis spectroscopy, isothermal titration calorimetry (ITC), and dynamic light scattering (DLS). It was found that the strength of the reducing agent determined both the size and the rate of formation of the Au NPs. The average diameters of the Au NPs prepared by reduction with HA, TES, and PTB were 1.7, 2.6, and 8 nm, respectively. The reduction of Au(III) was rapid with HA and PTB. TES proved to be a mild reducing agent for the synthesis of Au NPs. DLS measurements demonstrated swelling of the PS-b-P2VP micelles due to the incorporation of HAuCl₄ and the reducing agents. The original micellar structure rearranged during the reduction with PTB. ITC measurements revealed that some chemical reactions besides Au NPs formation also occurred in the course of the reduction process. The enthalpy of formation of Au NPs in PS-b-P2VP micelles reduced by HA was determined.     

Water‐Soluble Gold Nanoparticles: From Catalytic Selective Nitroarene Reduction in Water to Refractive Index Sensing

Water‐soluble gold nanoparticles (Au NPs) stabilized by a nitrogen‐rich poly(ethylene glycol) (PEG)‐tagged substrate have been prepared by reduction of HAuCl₄ with NaBH₄ in water at room temperature. The morphology and size of the nanoparticles can be controlled by simply varying the gold/stabilizer ratio. The nanoparticles have been fully characterized by TEM, high‐resolution (HR) TEM, electron diffraction (ED), energy‐dispersive X‐ray spectroscopy (EDS), UV/Vis, powder XRD, and elemental analysis. The material is efficient as a recyclable catalyst for the selective reduction of nitroarenes with NaBH₄ to yield the corresponding anilines in water at room temperature. Furthermore, the potential ability of the Au NPs as a refractive index sensor owing to their localized surface plasmon resonance (LSPR) effect has also been assessed.     

One‐Pot Fabrication of Noble‐Metal Nanoparticles That Are Encapsulated in Hollow Silica Nanospheres: Dual Roles of Poly(acrylic acid)

An efficient and facile one‐pot method was developed to fabricate noble‐metal nanoparticles (NMNs; Au, Pt, PdO and Ag) that were encapsulated within hollow silica nanospheres (HSNs; NMNs@HSNs) with a size of about 100 nm. NMNs@HSNs were afforded in very high yields between 85–95 %. Poly(acrylic acid) (PAA) polyelectrolyte played a dual role in the fabrication process, both as a core template of the HSNs and as a captor of the NMNs through coordination interactions between the COO^? groups on the ammonium polyacrylate (APA) polyanionic chains and the empty orbital of the Au atom. The amount of Au loading in Au@HSNs was easily regulated by varying the volume of the HAuCl₄ solution added. In addition, these rattle‐type particles were successfully applied in the catalytic reduction of 2‐nitroaniline (2‐NA) as a model reaction, thus indicating that the micropores in the silica shell could achieve the transport of small species—with a size smaller than that of the micropores—into the cavity. Thus, these fabricated NMNs@HSNs have promising applications in catalysis.     

Metal Oxide Thin Films Containing Au Nano-Particles Prepared with Gas Diffusion Method

Au particles dispersed thin metal oxide films were prepared from precursor films containing HAuCl₄ with H₂S gas diffusion method. HAuCl₄ was uniformly dissolved in the films as promoted by hydroxypropyl cellulose (HPC). The mechanism of the Au particle formation was studied. It was found that HAuCl₄ was converted directly to Au metal particles upon contacting with H₂S gas. Au particles generated by this method were characterized with small particle size, sharp size distribution and high volume fraction in the films. The surface plasma resonance absorption of Au particles shifted to longer wavelength when TiO₂ component was introduced in the matrix.     

The kinetics of synthesis and mechanism of coagulation of gold nanoparticles in Triton N-42 reverse micelles

The reduction of Au(III) with hydrazine monohydrate in micellar Triton N-42 solutions was shown to be an autocatalytic reaction. Its rate constants were calculated. The growth of a gold nucleus proceeded as a result of surface reduction until the polar micelle nanocavity was completely filled. Calculations according to the Derjaguin-Landau-Verway-Overbeck theory showed that the fate of nanoparticles formed depended on interparticle interaction energy. At a small radius of particles, high surface potential, and fairly thick surfactant surface layer, stable systems were formed. The coagulation zones were calculated depending on the structural parameters of nanoparticles and micelles. If a nanoparticle grew larger than 6.1 nm at a surface potential lower than 10 mV and surface layer thickness ～1.6 nm, the potential well depth exceeded 3/2 kT in magnitude, and coagulation occurred in the system.     

Superparamagnetic POT/Fe3O4 nanoparticle composites with supported Au nanoparticles as recyclable high-performance nanocatalysts

A novel method has been developed to successfully synthesize Fe₃O₄ nanoparticles with tunable size and morphology supported on shells of poly(o-Toluidine)(POT) hollow microspheres. The as-prepared POT/Fe₃O₄ nanoparticle composites can be used as novel and magnetic-responsive catalyst supports to produce highly efficient and recyclable noble metal catalysts. The size of Fe₃O₄ nanoparticles supported on shells of POT hollow microspheres can be tuned from 4 to 12 nm by changing the concentration of Fe ions. The roles of the doping acid of POT and Zeta potentials of Fe₃O₄ nanoparticles and POT in the formation of the POT/Fe₃O₄ nanoparticle composites were discussed. Furthermore, gold nanoparticles that were supported on the as-synthesized POT/Fe₃O₄ nanoparticle composites have been achieved by utilizing the reactivity of POT towards Au ions. The size of gold nanoparticles can be tuned by altering the concentration of HAuCl₄. Finally, the catalytic activity of the obtained POT/Fe₃O₄/Au composites for 4-nitrophenol (4NP) reduction is investigated. The results demonstrate that such magnetic-responsive polymer-supported gold nanoparticles can be easily recovered and reused five times still remains high catalytic performance, which indicate their potential applications in the field of catalysis.     

Decorating Polypyrrole Nanotubes with Au Nanoparticles by an In Situ Reduction Process

Au nanoparticle‐decorated polypyrrole nanotubes (defined as PPy/Au nanocomposites) are prepared by an in situ reduction process. Polypyrrole (PPy) nanotubes are prepared by a self‐degraded template method, and Au nanoparticles are deposited in situ by the reduction of HAuCl₄. The size and uniformity of the Au nanoparticles that decorate the PPy nanotubes can be controlled by adjusting the experimental conditions, such as the stabilizers used and the reaction temperature. The morphologies and optical properties of the nanocomposites have been characterized by scanning electron microscopy, transmission electron microscopy, UV‐vis, and FT‐IR spectroscopy. Conductivity measurements show that the conductivities of the nanocomposites decrease with a decrease of temperature, and the conductivity–temperature relationship obeys the quasi‐one dimensional variable range hopping model.

     

A facile approach to synthesize poly(4-vinylpyridine)/multi-walled carbon nanotubes nanocomposites: highly water-dispersible carbon nanotubes decorated with gold nanoparticles

A facile approach to attach high-density and uniform gold nanoparticles on individual multi-walled carbon nanotubes (MWNTs) is achieved. By simple grinding, water-soluble linear polymers poly(4-vinylpyridine) (PVP)-wrapped around nanotubes and thus rendered them reversibly soluble in water, ethanol, and DMF. Individual tubes are clearly observed after PVP-wrapped nanotubes were spin-coated onto a silicon wafer. Subsequently, Au nanoparticles were densely decorated on the individual MWNTs by in situ reduction of HAuCl₄ in the homogeneous aqueous solution of MWNTs–PVP to form stable water-dispersible Au/PVP/MWNTs hybrid. Morphology of Au nanoparticles was determined by scanning electron microscope and atomic force microscope. The diameter of the Au nanoparticles is controlled in the range of 3.5 to 13.5 nm. The presence of gold nanoparticles with decreased particle size was also detected by UV–Vis spectroscopy.     

Novel Structured Composites Formed from Gold Nanoparticles and Diblock Copolymers

We report a simple procedure to prepare a novel Au‐micelle composite with a core‐shell‐corona structure. This composite is prepared by reduction of tetrachloroauric acid (HAuCl₄ · 3H₂O) in dilute aqueous solution containing polystyrene‐block‐poly(4‐vinylpyridine) micelles and poly(ethylene oxide)‐block‐poly(4‐vinylpyridine) copolymers. The micelles with a polystyrene core and a poly(4‐vinylpyridine) shell are transformed into Au‐micelle composites with a polystyrene core, a swollen hybrid Au/poly(4‐vinylpyridine) inner shell, and a poly(ethylene oxide) corona by direct physisorption of gold particles with poly(4‐vinylpyridine) chains.

     

Synthesis of Core-Shell (Pd-Au) Bimetallic Nanoparticles in Microemulsions

Palladium-gold core-shell nanoparticles were synthesized in the aqueous domains of water in oil microemulsions by the sequential reduction of H₂PdCl₄ and HAuCl₄. The nanoparticles were characterized by ultraviolet-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM). The UV-vis spectra confirm the presence of palladium nanoparticles after reducing H₂PdCl₄. These particles have been used as seeds for the core-shell particles. UV-vis spectra show that, after reducing HAuCl₄, the surface plasmon absorption of the nanoparticles is dominated by gold, revealing the encapsulation of the palladium seeds. These results agree with crystallographic analysis performed with high-resolution TEM pictures, as well as with selected area electron diffraction. The TEM pictures show the core-shell nanoparticles with an average diameter of 9.1 nm, as compared with 5 nm for the palladium seeds, in good agreement with the used Pd:Au molar ratio.     

Functional polysilanes of relevance for the synthesis of Au and Au–Pd nanoparticle assemblies—a study on the role of polymer‐supported thioether side chains

Linear polysilanes, [{PhHSi}_x{Ph(RSCH₂CH₂CH₂)Si}_1?x]_n [R = n‐dodecyl ( 1 ), n‐hexyl ( 2 ), n‐butyl ( 3 )], have been synthesized and their reactivity with HAuCl₄·3H₂O (Polymer:Au = 10:1, RT, toluene) examined to gain an insight into the role of polymer‐supported thioether groups in the stabilization of in situ generated gold nanoparticles (AuNPs). The method allows a simple approach for expeditious synthesis of assemblies of AuNPs comprising of well‐separated individual nanoparticles of average diameter 4.5 ± 1.9 nm. In this regard, polysilane 1 with dodecyl side chains serves as a superior matrix than 2 and 3 and confers long shelf‐life stability to the nanoparticle assembly. The structural attributes are preserved in Au–Pd bimetallic nanoparticles which have been synthesized from the polymer‐gold nanoassembly. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Ferrocenyl Janus mixed-dendron stars and their stabilization of Au and Ag nanoparticles

Janus molecular architectures have recently attracted attention due to their structures and properties that differ from those of traditional symmetric structures. Herein, two new small redox-reversible mixed-dendron star-shape molecules containing three ferrocenyl groups have been synthesized by linking two distinct dendrons using an esterification reaction. These organometallic nano structures were characterized by ¹H and ¹³C NMR, MS, IR and UV–vis. spectroscopies and cyclic voltammetry confirming the number of ferrocenyl groups and AFM and DLS showing micellar assemblies. Au and Ag nanoparticles were stabilized in the presence of a mixed-dendron structure having amidoferrocene termini upon reaction of the nanoparticle metal precursor with NaBH₄. Compared reactions of the two star-molecules with HAuCl₄ showed a slow redox reaction leading to Au nanoparticles only with the star-molecule terminated with triazolyferrocene termini, which is taken into account by the difference of their redox potentials.     

Synthesis and Characterization of Gold‐Nanoparticle‐Cored Dendrimers Stabilized by Metal–Carbon Bonds

Synthesis and characterization of gold‐nanoparticle‐cored dendrimers (NCDs), in which the dendrons are attached to the gold core through gold–carbon bonds, are described. Synthesis of these materials involved the simultaneous reduction of HAuCl₄ and a Fréchet‐type dendron with a diazonium group at the focal point, all in an organic solvent such as toluene. These materials possess a nanometer‐sized gold core surrounded by a shell of polyaryl ether dendrons, which are connected radially to the core. The NCDs were characterized by TEM, thermogravimetric analysis (TGA), and IR, UV, and NMR spectroscopic techniques. Average particle diameter of the NCDs ranged from 4.7 to 5.5 nm for the different generations. All NCDs exhibit the characteristic plasmon absorption of gold nanoparticles at 520 nm. Average numbers of dendrons per NCD in AuG_n were calculated using results from TGA and TEM studies. Multiple layering of the dendrons is proposed as a possible reason for the high dendron/NCD value.     

Aerosol assisted chemical vapor deposition using nanoparticle precursors: a route to nanocomposite thin films

Gold nanoparticle and gold/semiconductor nanocomposite thin films have been deposited using aerosol assisted chemical vapor deposition (CVD). A preformed gold colloid in toluene was used as a precursor to deposit gold films onto silica glass. These nanoparticle films showed the characteristic plasmon absorption of Au nanoparticles at 537 nm, and scanning electron microscopic (SEM) imaging confirmed the presence of individual gold particles. Nanocomposite films were deposited from the colloid concurrently with conventional CVD precursors. A film of gold particles in a host tungsten oxide matrix resulted from co-deposition with [W(OPh)(6)], while gold particles in a host titania matrix resulted from co-deposition with [Ti(O(i)Pr)(4)]. The density of Au nanoparticles within the film could be varied by changing the Au colloid concentration in the original precursor solution. Titania/gold composite films were intensely colored and showed dichromism: blue in transmitted light and red in reflected light. They showed metal-like reflection spectra and plasmon absorption. X-ray photoelectron spectroscopy and energy-dispersive X-ray analysis confirmed the presence of metallic gold, and SEM imaging showed individual Au nanoparticles embedded in the films. X-ray diffraction detected crystalline gold in the composite films. This CVD technique can be readily extended to produce other nanocomposite films by varying the colloids and precursors used, and it offers a rapid, convenient route to nanoparticle and nanocomposite thin films.