Emulsion copolymerization of substituted acetylenes for constructing optically active helical polymer nanoparticles. Synergistic effects and helicity inversion

Copolymerizations of substituted acetylenes have been intensively studied in solution polymerization for constructing chirally helical polymers, while emulsion copolymerizations of the kind of monomers have been only scarcely reported. In the present study, chiral substituted acetylene monomer containing cholic acid group underwent emulsion copolymerizations with an achiral acetylenic monomer in the presence of rhodium catalyst, providing optically active helical copolymer nanoparticles. Synergistic effects were found in the resulting helical copolymers, enabling one certain copolymer to show the maximum CD signal intensity. Moreover, the helicity of the helical copolymers in nanoparticle state was opposite to that in solution state. This is the first demonstration that synergistic effects and helicity inversion simultaneously occurred in helical copolymers prepared by emulsion copolymerization process. To deepen the understanding of the unique phenomena, corresponding solution copolymerization and emulsification process were also investigated. Different from “Sergeant and Soldiers rule” approach, the present study provides a new strategy for preparing chirally helical polymer particles by making full use of achiral monomers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1679–1685     

乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

Helix‐sense‐selective copolymerization of triphenylmethyl methacrylate with chiral 2‐isopropenyl‐4‐phenyl‐2‐oxazoline

The asymmetric induction leading to a one‐handed helix was investigated in the anionic and radical copolymerization of triphenylmethyl methacrylate (TrMA) and (S)‐2‐isopropenyl‐4‐phenyl‐2‐oxazoline ((S)‐IPO), and highly isotactic copolymers with a reasonable optical activity were obtained. In the anionic copolymerization, the optical activity of the obtained copolymers depended on the polarity of solvents, and a highly optically active copolymer was produced in the copolymerization in toluene. The chiral oxazoline monomer functioned not only as a comonomer but also as a chiral ligand to endow the polymer with large negative optical rotation in the copolymerization with TrMA. The copolymers with small positive optical rotation were obtained in THF, indicating that IPO unit may work only as the chiral monomer that dictates the helical sense via copolymerization with TrMA. The isotacticity of the obtained copolymers depended on the contents of TrMA units in the copolymers, but was almost independent of the solvent for copolymerization. In the radical copolymerization, the obtained copolymers exhibited small optical activities. It seemed that the chiral monomer cannot induce one‐handed helical structure of TrMA sequences even if the sequences probably have a high isotacticity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 441–447     

Chirality in Dynamic Supramolecular Nanotubes Induced by a Chiral Solvent

Amplification of chirality has been reported in polymeric systems. It has also been shown that related effects can occur in polymer‐like dynamic supramolecular aggregates, if a subtle balance between noncovalent interactions allows the coupling between a chiral information and a cooperative aggregation process. In this context, we report a strong majority‐rules effect in the formation of chiral dynamic nanotubes from chiral bisurea monomers. Furthermore, similar helical nanotubes (with the same circular dichroism signature) can be obtained from racemic monomers in a chiral solvent. Competition experiments reveal the relative strength of the helical bias induced by the chiral monomer or by the chiral solvent. The nanotube handedness is imposed by the monomer chirality, whatever the solvent chirality. However, the chirality of the solvent has a significant effect on the degree of chiral induction.     

Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

侧基对N-炔丙基酰胺螺旋共聚物光学活性的影响

设计并合成了5个系列的带有不同侧基的手性-非手性N-炔丙基酰胺共聚物,以铑有机配合物为催化剂对单体实施聚合反应得到高产率(>95%)的共聚物,聚合物具有高立构规整性(cis-含量高于94%).利用圆二色(CD)及紫外-可见吸收(UV-Vis)光谱技术对共聚物的二级结构及光学活性进行了表征,当非手性单体的酰胺侧基体积适中时,共聚物具有较高的光学活性,部分共聚物的光学活性甚至高于纯手性聚合物.表明通过选择合适的手性-非手性共聚单体及单体配比,可获得具有高光学活性的螺旋聚合物.     

Influence of multiple stimuli on the lower critical solution temperature of new cationic poly(N‐acryloyl‐N′‐ethylpiperazine‐co‐N‐isopropylacrylamide) solutions

New multi‐stimuli responsive cationic copolymers based on N‐acryloyl‐N′‐ethyl piperazine (AcrNEP) and N‐isopropylacrylamide (NIPAM) were prepared by thermal free‐radical solution polymerization in dioxane at 75 °C. The chemical composition of the copolymers was determined by ¹H NMR spectroscopy and was found that the copolymers were slightly rich in NIPAM content than that of AcrNEP. The reactivity of the two monomers for the copolymerization reaction was evaluated by the extended Kelen‐Tüdös method. The distribution of monomer sequence in the copolymer chain was estimated using the terminal copolymerization model. The maximum tendency to alternation (～ 70%) was at 60 mol % of AcrNEP in the monomer feed. The copolymers were readily soluble in water at room temperature at all compositions and exhibited well‐defined lower critical solution temperature (LCST) phenomenon. The influence of various stimuli such as pH, temperature, simple inorganic salts, and surfactants on the LCST of the copolymers was studied in detail. Simple inorganic salts such as sodium chloride, sodium bromide, and sodium sulfate showed a salting‐out effect while sodium iodide showed a salting‐in effect. The salting‐out coefficient of the salts were calculated using the Sestchenow method, and the salting trend followed the order SO₄^2? > Cl^? > Br^? > I^?. The divalent salt was more effective in lowering the LCST than the monovalent salts. The cationic surfactant hexadecyl trimethylammonium bromide at concentrations above the critical micelle concentration caused a gradual increase in the LCST of the copolymer solutions. The intrinsic viscosity and light scattering behavior of the copolymers in water and in sodium chloride solutions were studied in detail. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1175–1183     

Induction of a chiral nematic phase in smectic polymers

A number of new photosensitive copolyacrylates of different composition were obtained by the copolymerization of chiral photochromic benzilidene-p-menthane- 3-one acrylic monomers with a smectogenic monomer containing a hexyloxyphenylbenzoate mesogenic group. The chiral, photochromic monomers differ by the length of the aliphatic spacer and the aromatic fragment. It was found that the introduction of a small number of chiral units into the copolymers (5 mol%) leads to the “degeneration” of the smectic C phase, which characterizes the hexyloxyphenylbenzoate homopolymer, and to the formation of the smectic A phase. An unusual effect of chiral nematic phase induction was observed for copolymers containing chiral side groups with two ring aromatic fragments. It should be pointed out that the chiral nematic phase does not occur in the case of the homopolymers of both initial comonomers. An explanation of this effect, based on the consideration of the chemical structure of the chiral and hexyloxyphenylbenzoate units, was suggested. The optical properties of cholesteric copolymers were investigated; the helical twisting power of the chiral groups of different structures was calculated. The possibility of using such copolymers as new photosensitive materials was demonstrated. Received: 16 December 1999/Accepted: 1 February 2000     

Polymer–Metal Complexes Obtained by Radiation‐Induced Grafting Process onto Polyester Fabrics

Abstract

This paper reports the preparation of chelating copolymers via grafting of acrylic acid, and/or acrylamide onto polyester microfiber (PETMF) fabrics using a γ‐radiation technique. The effect of monomer concentration on the grafting process at irradiation dose 20?kGy was studied. The prepared graft chains (PETMF‐g‐AA), (PETMF‐g‐AAm), and (PETMF‐g‐PAAc/PAAm) acted as chelating sites for some selected transition metal ions. The effect of grafting on mechanical properties of PETMF and its copolymer–metal complexes was investigated. The prepared chelating copolymers and their metal complexes were characterized using x‐ray (energy dispersive x‐ray, EDX), differential scanning calorimeter (DSC), color parameters, and electrical conductivity measurements. The possibility of practical uses for such prepared graft copolymer–metal complexes was discussed and determined. The observed results showed that the electrical conductivity of the grafted copolymers and their metal complexes are thermally activated. Moreover, the degree of grafting enhanced the conductivity values of the grafted and non‐complexed copolymer up to three orders of magnitude, on the other hand, the conductivity of the copolymer–metal complexes slightly increased.     

Amino‐Acid‐Based Block Copolymers by RAFT Polymerization

This review summarizes recent advances in the design and synthesis of amino‐acid‐based block copolymers by reversible addition–fragmentation chain transfer (RAFT) polymerization of amino‐acid‐bearing monomers. We will mainly focus on stimuli‐responsive block copolymers, such as pH‐, thermo‐, and dual‐stimuli‐responsive block copolymers, and self‐assembled block copolymers, including amphiphilic and double‐hydrophilic block copolymers having tunable chiroptical properties. We will also highlight recent results in RAFT synthesis of amino‐acid‐based copolymers having various properties, such as catalytic and optoelectronic properties, cross‐linked block copolymer micelles, unimolecular micelles, and organic–inorganic hybrids.     

Helical Poly(phenylacetylene) Bearing Chiral and Achiral Imidazolidinone‐Based Pendants that Catalyze Asymmetric Reactions due to Catalytically Active Achiral Pendants Assisted by Macromolecular Helicity

A series of optically active helical copolymers of phenylacetylenes are prepared by the rhodium‐catalyzed copolymerization of the imidazolidinone‐linked, catalytically active achiral phenylacetylenes and catalytically inactive chiral phenylacetylenes. The obtained chiral/achiral copolymers exhibit an induced circular dichroism in the UV–vis regions of the copolymer backbones resulting from a preferred‐handed helical conformation biased by the chiral imidazolidinone units incorporated in the copolymers. The copolymers are found to catalyze the asymmetric Diels–Alder reaction and produce the products with a moderate enantioselectivity in spite of the fact that the catalytically active units of the copolymers are achiral, indicating that the observed enantioselectivity totally originates from the helical chirality dynamically induced by the optically active, but catalytically inactive imidazolidinone units incorporated in the copolymers.

     

Crystallization‐Driven Asymmetric Helical Assembly of Conjugated Block Copolymers and the Aggregation Induced White‐light Emission and Circularly Polarized Luminescence

Controlling the self‐assembly morphology of π‐conjugated block copolymer is of great interesting. Herein, amphiphilic poly(3‐hexylthiophene)‐block‐poly(phenyl isocyanide)s (P3HT‐b‐PPI) copolymers composed of π‐conjugated P3HT and optically active helical PPI segments were readily prepared. Taking advantage of the crystallizable nature of P3HT and the chirality of the helical PPI segment, crystallization‐driven asymmetric self‐assembly (CDASA) of the block copolymers lead to the formation of single‐handed helical nanofibers with controlled length, narrow dispersity, and well‐defined helicity. During the self‐assembly process, the chirality of helical PPI was transferred to the supramolecular assemblies, giving the helical assemblies large optical activity. The single‐handed helical assemblies of the block copolymers exhibited interesting white‐light emission and circularly polarized luminescence (CPL). The handedness and dissymmetric factor of the induced CPL can be finely tuned through the variation on the helicity and length of the helical nanofibers.     

L-丙烯酸薄荷酯与2,5-二(4'-己氧基苯基)苯乙烯无规共聚物的合成和旋光性质

通过自由基共聚合制备了一系列L-丙烯酸薄荷酯( L-MtA)与2,5-二(4'-己氧基苯基)苯乙烯(BHPSt)的共聚物L-MtA(x)-co-BHPSt(1-x).利用UV-Vis和1H-NMR光谱表征了共聚物的组成,根据Kelen-Tüd(o)s (K-T)方法计算得到的L-MtA和BHPSt的竞聚率分别为0.36...     

From Sergeants and Soldiers to Chiral Conflict Effects in Helical Polymers by Acting on the Conformational Composition of the Comonomers

Different communication mechanisms can be switched within a copolymer by acting on the conformational composition of the components and their chirality. Thus, a sergeant and soldiers effect is produced in two diastereomeric copolymer series, poly[(S)- 1 _r-co-(S)- 2 _(1−r)] and poly[(R)- 1 _r-co-(S)- 2 _(1−r)], owing to the presence in chloroform of a preferred conformation in (S)- 2 , and a conformational equilibrium in 1 , where a P helix is induced independently of the absolute configuration of the soldier. In THF, the presence of a conformational equilibrium at the pendants of the two components produces a reciprocal chiral enhancement effect by copolymerization of the two monomers, while in DMF, a third chiral to chiral communication switch is produced due to the presence of a single conformer at the pendant group of the two components. In such a case, a chiral conflict or chiral accord effect is produced depending if the two components induce the same or the opposite helical sense.     

The research on multi‐responsive azobenzene block copolymer and its self‐assembly behavior

The azobenzene‐based amphiphilic copolymers have drawn significant attention as a kind of multi‐responsive smart materials. The demand on deeper investigation of how the azobenzene group influences the micelles formation and light‐responsive behavior on molecular level is very urgent. In this article, multi‐responsive block copolymers, poly (acrylic acid)‐block‐poly[4'‐[[(2‐Methacryloyloxy)ethyl]ethylainino]azobenzene‐co‐poly (ethylene glycol) methyl ether methacrylate] (PAA‐b‐P (AzoMA‐co‐PEGMA)), with pH‐, light‐ and reduction‐responsiveness were synthesized by the monomers of AzoMA, PEGMA and acrylic acid via reversible addition‐fragmentation chain transfer polymerization (RAFT). The amphiphilic block copolymer presented aggregation‐induced emission effect, and it was pH, light, and reduction responsive. The results showed that the micelle size decreased with the decreasing of pH within a certain range. However, the particle size of micelles increased significantly when the pH was 4. Once adding reduction agent, the micelles were disassembly. Fluorescent molecule of Nile red was selected as a hydrophobic guest molecule to study the properties of encapsulating and releasing abilities of block copolymer micelles for guest molecules. The results showed that the loading capacity of three kinds of copolymer micelles was closely related to the aggregates formed by the hydrophobic block, mainly azobenzene block. Besides, the block copolymer micelles could release a certain amount of Nile red under the irradiation of UV light, the reduction with Na₂S₂O₄ as reductant, and the exposure to alkaline environment. The mechanism of how the different status of azobenzene group influenced the self‐assembly and multi‐responsive behavior was explored on molecular level.     

Optically Active Helical Vinylterphenyl Polymers: Chiral Teleinduction in Radical Polymerization and Tunable Stereomutation

Helical vinyl aromatic polymers are emerging as interesting chiral materials due to their dynamic tailorability, synthetic simplicity, and outstanding chemical and physical stabilities. This Personal Account discusses long‐range chirality transfer in the radical polymerization of vinylterphenyl monomers and tunable stereomutation of the resultant polymers. It begins with a general introduction to the design, synthesis, and characterization of helical poly{(+)‐2,5‐bis[4′‐((S)‐2‐methylbutyloxy)phenyl]styrene}, the first one of this series of polymers. Then, long‐range chirality transfer during radical polymerization of terphenyl‐based vinyl monomers is explained. After that, the chiroptical property control of the resultant polymers by means of the transition from kinetically controlled conformation to thermodynamically controlled conformation and external stimulus is described. This Personal Account concludes by discussing the advantages and disadvantages of the strategy of using vinylterphenyls to obtain optically active helical polymers and providing a short outlook, especially emphasizing the importance of tacticity on the chiroptical properties of polymers.     

Control of helix sense by composition of chiral-achiral copolymers of N-propargylbenzamides

N-Propargylbenzamides 1-7 were polymerized with (nbd)Rh(+)[eta(6)-C(6)H(5)B(-)(C(6)H(5))(3)] to afford polymers with moderate molecular weights (M(n) = 26,000-51,000) in good yields. The (1)H NMR spectra demonstrated that the polymers have fairly stereoregular structures (81-88 % cis). The optically active polymers, poly(1) and poly(2), were proven by their intense CD signals and large optical rotations to adopt a stable helical conformation with an excess of one-handed screw sense when heated in CHCl(3) or toluene. The sign of Cotton effect could be controlled by varying the content in the copolymers of either chiral bulky 1 and achiral nonbulky 3, or chiral nonbulky 2 and achiral bulky 7. The smaller the pendant group in the copolymerization of achiral monomers with 1, the more easily did the preferential helical sense change with the copolymer composition. However, the copolymers of chiral nonbulky 2 and achiral nonbulky 3 did not change the helical sense, irrespective of the composition. The free energy differences between the plus and minus helical states, as well as the excess free energy of the helix reversal, of those chiral-achiral random copolymers were estimated by applying a modified Ising model.     

Self‐assembly in solutions of block and random copolymers during metal nanoparticle formation

The self‐assembly behavior of poly(isoprene‐b‐acrylic acid) and poly(styrene‐b‐2‐vinylpyridine) amphiphilic block copolymers, as well as a poly(styrene‐r‐2‐vinylpyridine) amphiphilic random copolymer was investigated in slightly selective organic solvents (tetrahydrofuran and toluene) in the presence of Ag and Au ions and subsequently Ag, Au metal nanoparticles, by means of dynamic light scattering. In the range of concentrations studied the copolymers exist in the form of micelles with cores composed of acrylic acid and 2‐vinylpyridine segments in equilibrium with unimers. The addition of metal ions and their subsequent transformation to metal nanoparticles shifts the equilibrium in favor of the micelles. The concentration of the inorganic components has also a considerable effect on the size of the polymeric aggregates. A similar behavior is observed for the random copolymer. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), UV‐visible spectroscopy, and transmission electron microscopy (TEM) give valuable additional information on the nature of the interactions between the polymeric and inorganic components, as well as on the characteristics of the metal nanoparticles and the hybrid micelles formed in each case. The presented results have a direct relation to the synthesis of metal nanoparticles under confinement by utilization of copolymer nanoreactors and appropriate solution conditions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1515–1524, 2008     

Synthesis and properties of photochromic liquid‐crystalline copolymers containing both spironaphthoxazine and cholesteryl groups

Photochromic liquid‐crystalline copolymers consisting of a photochromic monomeric unit containing both a spironaphthoxazine group and an undecamethylene spacer, and a liquid‐crystalline monomeric unit containing both a cholesteryl group and a decamethylene spacer were prepared to investigate the effect of the thermal properties of the photochromic monomeric unit on the mesomorphic order of the side chain of the related copolymers. The photochromic liquid‐crystalline copolymers containing a photochromic liquid‐crystalline monomeric unit showed only a smectic phase. On the other hand, the photochromic liquid‐crystalline copolymers containing a photochromic non‐liquid‐crystalline monomeric unit showed a chiral nematic phase (cholesteric phase). The photochromic chiral nematic liquid‐crystalline copolymer containing 14 mol % photochromic monomeric unit reflected visible light around 104 °C. To lower the temperature range of reflection of visible light, cholesteryl oleyl carbonate was used as a chiral nematic plasticizer for the photochromic chiral liquid‐crystalline polymer systems. Photo‐induced pitch change of the mixture by means of UV irradiation was investigated and it was concluded that the pitch change observed under UV irradiation was mainly induced by thermal effect in the case of our system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 887–894, 2000