Controlling DNA/Surface Interactions for Potential Pulse‐Assisted Preparation of Multi‐Probe DNA Microarrays

The possibility of selectively modifying microarray electrodes with different DNA sequences in a controlled way without the need for local positioning of solutions or local modification of array surfaces is demonstrated. Potential pulse sequences are employed to perform sequential surface modification of a 32‐gold‐electrode array with two different thiolated DNA capture sequences, surface passivation and regeneration of selected microarray electrodes, all by adjusting the potential intensities of the same potential pulse‐assisted method. We achieve reproducible and controlled DNA immobilization together with minimization of false signals originating from unspecific adsorption or undesired co‐immobilization. This methodology is not limited to DNA chips and it is potentially suitable for a wide range of applications employing Au?S chemistry. It can be employed in laboratory conditions for localizing different reactive chemistries onto predefined electrodes of an array without the need for complex and expensive apparatus and special conditions.     

Self‐Assembled Au Nanoparticles as Substrates for Surface‐Enhanced Vibrational Spectroscopy: Optimization and Electrochemical Stability

Three‐dimensional nanostructured metallic substrates for enhanced vibrational spectroscopy are fabricated by self‐assembly. Nanostructures consisting of one to 20 depositions of 13 nm‐diameter Au nanoparticles (NPs) on Au films are prepared and characterized by means of AFM and UV/Vis reflection–absorption spectroscopy. Surface‐enhanced polarization modulation infrared reflection–absorption spectroscopy (PM‐IRRAS) is observed from Au NPs modified by the probe molecule 4‐hydroxythiophenol. The limitation of this kind of substrate for surface‐enhanced PM‐IRRAS is discussed. The surface‐enhanced Raman scattering (SERS) from the same probe molecule is also observed and the effect of the number of Au‐NP depositions on the SERS efficiency is studied. The SERS signal from the probe molecule maximizes after 11 Au‐NP depositions, and the absolute SERS intensities from different batches are reproducible within 20 %. In situ electrochemical SERS measurements show that these substrates are stable within the potential window between ?800 and +200 mV (vs. Ag/AgCl/sat. Cl^?).     

Electrodeposition of dendritic gold/silver nanaoparticles on disposable screen‐printed carbon electrode and its application of 4‐mercaptopyridine in in situ electrochemical surface‐enhanced Raman scattering

Column electrodes pretreated through oxidation–reduction cycles were traditionally used in electrochemical surface‐enhanced Raman scattering (SERS). In this study, a disposable screen‐printed carbon electrode was introduced into in situ electrochemical SERS through the electrodeposition of dendritic gold/silver nanoparticles (Au/AgNPs) onto the surface of the carbon working electrode to induce the SERS enhancement effect on the electrode. Scanning electron microscopy images showed that dendritic Au/AgNPs nanostructures could be fabricated under appropriate electrodeposition conditions and could present a minimum SERS factor of 4.25 × 10⁵. Furthermore, the absorbed behavior of 4‐mercaptopyridine was investigated under different potentials. The adsorption configuration was inferred to transform from ‘vertical’ to ‘lying‐flat’. The proposed new electrode combined with a portable Raman spectrometer could be useful in the identifying products or intermediates during electrochemical synthesis or electrochemical catalysis in in situ electrochemical SERS. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrochemical synthesis and functionality evaluation of silver nanostructured layers

The functionality of silver nanostructures prepared by means of electrochemical deposition of silver into the pores of anodic alumina oxide (AAO) template was examined in correlation to electrodeposition conditions. The optical activity as well as the chemical separation ability of prepared nanostructured films was studied. The surface enhanced Raman spectroscopy (SERS) performance was evaluated by the signals of rhodamine 6G, 4‐aminothiophenol and 2,7‐dichlorfluorescein. Nanostructured silver substrates showed moderate surface enhancement for Raman scattering from adsorbed molecules with the magnitude of about 26.9. Moreover, a novel separation/pre‐concentration function of the silver nanowire structures was indicated. The identification and position detection of the model compounds were realised with SERS. The separation of single chemical components from the two‐component mixture over the examined silver nanostructured films was sufficiently approved. The results obtained demonstrated the potential of the prepared substrate as a SERS detection and separation probe for further implementation to any instrumentation. Copyright © 2014 John Wiley & Sons, Ltd.     

Direct Electrochemical Oxidation of DNA on Polycrystalline Gold Electrodes

Electrochemical CV and SWV studies were performed with double stranded DNA from salmon testes (dsDNA) and single stranded DNAs, containing 25 nucleotides (ssDNA) directly adsorbed at polycrystalline Au electrodes. A distinct oxidation peak at +730 mV (SWV, scan rate 0.248 V s^?1) or at +730 – +780 mV (CV, scan rate from 0.3 to 1 V s^?1) was obtained with DNA‐modified Au electrodes after a time‐dependent prepolarization step at a positive potential value, i.e., at +500 mV (vs. Ag|AgCl), performed with the DNA‐modified Au electrodes dipped in a blank buffer solution. No electrochemical activity was detected when ssDNA, containing no guanines, was used for adsorptive modification of the Au electrodes. Electrochemical impedance measurements registered a possible reorganization of the adsorbed DNA layer in the course of the prepolarization, accompanied by decreasing in‐phase impedance. The results enable us to relate the oxidation process observed at the DNA‐modified Au electrodes with the oxidation of guanine residues in DNA.     

Electrochemical Behavior and Amperometric Detection of 4‐Chlorophenol on Nano‐Au Thin Films Modified Glassy Carbon Electrode

An amperometric sensor based on nano‐Au thin films was fabricated, by means of which a fast response to 4‐chlorophenol (4‐CP) can be achieved in the range of mM concentrations. The nanostructured Au thin film was prepared on glassy carbon electrodes by a template‐free, double‐potential step electrodeposition technique. Its structural feature can be controlled well by adjusting the deposition time. The amperometric detection of 4‐CP was performed at +0.85 V with a linear detection range from 0.2 to 4.8 mM and a detection limit of 0.11 mM (S/N=3). Besides, the effect of concentrations on the electrochemical behavior of 4‐CP on the Au thin film was investigated by linear sweep voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy.     

Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

Highly reproducible surface-enhanced Raman scattering-active Au nanostructures prepared by simple electrodeposition: Origin of surface-enhanced Raman scattering activity and applications as electrochemical substrates

The fabrication of effective surface-enhanced Raman scattering (SERS) substrates has been the subject of intensive research because of their useful applications. In this paper, dendritic gold (Au) rod (DAR) structures prepared by simple one-step electrodeposition in a short time were examined as an effective SERS-active substrate. The SERS activity of the DAR surfaces was compared to that of other nanostructured Au surfaces with different morphologies, and its dependence on the structural variation of DAR structures was examined. These comparisonal investigations revealed that highly faceted sharp edge sites present on the DAR surfaces play a critical role in inducing a high SERS activity. The SERS enhancement factor was estimated to be greater than 10⁵, and the detection limit of rhodamine 6G at DAR surfaces was 10⁻⁸ M. The DAR surfaces exhibit excellent spot-to-spot and substrate-to-substrate SERS enhancement reproducibility, and their long-term stability is very good. It was also demonstrated that the DAR surfaces can be effectively utilized in electrochemical SERS systems, wherein a reversible SERS behavior was obtained during the cycling to cathodic potential regions. Considering the straightforward preparation of DAR substrates and the clean nature of SERS-active Au surfaces prepared in the absence of additives, we expect that DAR surfaces can be used as cost-effective SERS substrates in analytical and electrochemical applications.     

应用镍超微电极的电化学表面增强拉曼光谱技术研究

镍(Ni)电极在电化学中应用广泛.原位表征Ni电极表面的吸附物种有益于帮助理解电极反应历程、指导发展高效电催化剂.应用超微电极作为工作电极的电化学表面增强拉曼光谱技术结合了超微电极表面的传质特性和分子水平的高灵敏度表征,是研究Ni电化学的有力手段.本文所述的研究工作通过在金(Au)超微电极表面电吸附具有SERS活性的A...     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

Three-dimensional nanostructured carbon nanotube array/PtRu nanoparticle electrodes for micro-fuel cells

We have fabricated three-dimensional (3D) nanostructured carbon nanotube (CNT) array/PtRu nanoparticle (with the average molar percentage (26%) of Ru) electrodes using anodic aluminum oxide (AAO) templates for micro-fuel cells. 3D nanostructured CNT array was used to support PtRu nanoparticles to enhance the utilization efficiency of Pt. The 3D nanostructured CNT array/PtRu electrodes show the excellent catalytic activity and electrochemical stability of electro-oxidation of methanol. Their anodic current density is 10 times as high as that of PtRu thin-films, which could be explained in terms of the high specific surface area of 3D nanostructured CNT array supporting films and the uniform distribution of PtRu nanoparticles.     

An Electrochemical Sensing Platform for the Detection of Lead Ions Based on Dicarboxyl‐Calix[4]arene

A simple and highly sensitive electrochemical sensor COOH−C4 derived from dicarboxyl‐calix[4]arene modified on a screen printed gold electrode (Au) was developed for the determination of lead ions in water samples. A 3‐mercaptopropionic acid (MPA) monolayer was used as a template on the gold electrode for the surface modification with dicarboxyl‐calixarene. The modified electrodes were surface‐characterized using Fourier Transform infrared spectroscopy (FTIR). The data obtained proved the confirmation of each stage of the electrode modification. The electrochemical analyses of the COOH−C4 electrode showed an enhanced electrocatalytic activity and higher current towards Pb²⁺ ions as compared to the bare Au and MPA/Au electrodes. Under optimum conditions, the differential pulse voltammetry response of COOH−C4 displayed a wide linear response ranging from 280–2500 μg/L for Pb²⁺ with a detection limit of 6.2 μg/L. In addition, the fabricated electrode showed a high selectivity and stability towards the Pb²⁺ ions in presence of possible interfering species. The present method was successfully applied to determine Pb²⁺ ions in real samples with satisfactory precision, with a relative standard deviation of 3.12 % and an acceptable recovery of 92 %, which demonstrated the potential application of dicarboxyl‐calix[4]arene modified on electrodes for heavy‐metal sensing.     

Lightweight ITO Electrodes Decorated with Gold Nanostructures for Electrochemical Applications

Gold nanostructures were fabricated on a transparent indium tin oxide (ITO) coated PET substrate by an electrodeposition technique from a potassium gold (III) chloride solution for two different types of applications. It was found that the optical transparency of lightweight ITO electrodes could be maintained by depositing isolated gold nanostructures while opening up the use of these electrodes for inner sphere electron reactions, such as hydroquinone oxidation, which are not possible at ITO electrodes. For practical applications the adhesion of gold to the ITO electrode was improved by modifying the ITO surface with 3‐mercaptopropyl‐trimethoxysilane (MPS). Compared to Au/ITO, the Au/MPS/ITO electrode showed vastly improved electrochemical activity toward various electron transfer reactions when subjected to mechanical stress. The biosensing properties of the Au/MPS/ITO electrode was also investigated by studying the detection of immobilized DNA on the Au/MPS/ITO electrode via electrochemical impedance spectroscopy (EIS).     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

A Host‐Guest‐Recognition‐Based Electrochemical Sensor for Sequence‐Specific DNA Detection

We herein constructed a sensor that converts target DNA hybridization‐induced conformational transformation of the probe DNA to electrochemical response based on host‐guest recognition and nanoparticle label. In the sensor, the hairpin DNA terminal‐labeled with 4‐((4‐(dimethylamino)phenyl)azo)benzoic acid (dabcyl) and thiol group was immobilized on Au electrode surface as the probe DNA by Au‐S bond, and the CdS nanoparticles surface‐modified with β‐cyclodextrins (CdS‐CDs) were employed as electrochemical signal provider and host‐guest recognition element. Initially, the probe DNA immobilized on electrode kept the stem‐loop configuration, which shielded dabcyl from docking with the CdS‐CDs in solution due to the steric effect. After target hybridization, the probe DNA underwent a significant conformational change, which forced dabcyl away from the electrode. As a result, formerly‐shielded dabcyl became accessible to host‐guest recognition between β‐cyclodextrin (β‐CD) and dabcyl, thus the target hybridization event could be sensitively transduced to electrochemical signal provided by CdS‐CDs. This host‐guest recognition‐based electrochemical sensor has been able to detect as low as picomolar DNA target with excellent differentiation ability for even single mismatch.     

结合化学组装和电沉积的SERS基底的制备方法

采用一种结合化学组装和电化学沉积制备均匀而且具有强SERS基底的方法, 研究了沉积电位对组装在ITO表面的金纳米粒子形貌的影响, 发现在-0.04 V下沉积5 min可以得到形貌均匀的纳米粒子. 利用现场电化学紫外-可见吸收光谱来监控电化学沉积过程, 发现沉积一定时间后, 紫外-可见吸收谱在600~700 nm区间出现新峰, 表明粒子间发生了有效的电磁场耦合. 对制备的基底进行拉曼成像, 结果表明, 基底的均匀性很好, 最强点与最弱点的d信号差小于20%, 符合商品化基底的要求.     

有序Au/Ag纳米碗阵列的简易制备及其表面增强拉曼散射性能

通过湿法化学合成基于SiO₂胶体晶体的大面积有序Au/Ag纳米碗(Au/AgNB)阵列。首先,在玻璃基板上以3D SiO₂胶体晶体作为模板。然后,在Au纳米颗粒(AuNP)种子的帮助下,通过原位生长方法在模板上沉积一层Au纳米壳(AuNS)。再通过HCHO还原Ag⁺使AuNS表面进一步沉积Ag纳米壳,形成Ag/Au双纳米壳(Ag/AuNS)阵列。通过丙烯酸酯改性双向取向聚丙烯(BOPP)方便地获得了单层有序反转Ag/AuNB阵列。这种有序Au/AgNB阵列具有更佳的表面增强拉曼散射(SERS)活性,其SERS分析增强因子(AEF)可达2.23×10⁷。     

银/金纳米线阵列表面增强拉曼基底的制备及对孔雀石绿的高灵敏度检测

利用种子介导的软模板生长方法制备了金纳米线(Au NWs)阵列, 通过调节生长温度控制Au NWs阵列的形貌, 最后在经硼氢化钠(NaBH₄)清洗过的Au NWs阵列上化学沉积银纳米颗粒(Ag NPs), 制得银/金纳米线(Ag/Au NWs)阵列作为表面增强拉曼散射(SERS)基底. 选用罗丹明6G(R6G)作为拉曼探针分子测定了Ag/Au NWs阵列的SERS性能. 结果表明, Ag/Au NWs阵列作为SERS基底具有高灵敏度、 优异的信号均匀性和良好的稳定性. 使用Ag/Au NWs阵列对孔雀石绿(MG)检测的检出限可低至1×10^-8 mol/L, 线性范围为 1×10^-8~1×10^-4 mol/L. NaBH₄可以在不影响SERS性能的情况下去除Ag/Au NWs阵列上吸附的分子, 使得 SERS基底可以重复使用. 使用Ag/Au NWs阵列对湖水中的MG进行检测, 得到了可靠的回收率, 证明Ag/Au NWs 阵列在检测环境水体中的孔雀石绿上具有应用潜力.     

有序Au/Ag纳米碗阵列的简易制备及其表面增强拉曼散射性能

通过湿法化学合成基于SiO₂胶体晶体的大面积有序Au/Ag纳米碗(Au/AgNB)阵列。首先,在玻璃基板上组装3D SiO₂胶体晶体作为模板。然后,以Au纳米颗粒(AuNP)为种子,通过原位生长法在SiO₂模板上沉积一层Au纳米壳(AuNS)。再通过HCHO还原Ag⁺成Ag⁰,进一步在AuNS表面沉积Ag纳米壳,形成Ag/Au双纳米壳(Ag/AuNS)阵列。最后通过丙烯酸酯改性双向取向聚丙烯(BOPP)膜方便地获得了单层有序反转Ag/AuNB阵列。这种有序Au/AgNB阵列具有更佳的表面增强拉曼散射(SERS)活性,其SERS分析增强因子(AEF)可达2.23×10⁷。     

Surface-enhanced Raman spectroscopy: substrate-related issues

After over 30 years of development, surface-enhanced Raman spectroscopy (SERS) is now facing a very important stage in its history. The explosive development of nanoscience and nanotechnology has assisted the rapid development of SERS, especially during the last 5 years. Further development of surface-enhanced Raman spectroscopy is mainly limited by the reproducible preparation of clean and highly surface enhanced Raman scattering (SERS) active substrates. This review deals with some substrate-related issues. Various methods will be introduced for preparing SERS substrates of Ag and Au for analytical purposes, from SERS substrates prepared by electrochemical or vacuum methods, to well-dispersed Au or Ag nanoparticle sols, to nanoparticle thin film substrates, and finally to ordered nanostructured substrates. Emphasis is placed on the analysis of the advantages and weaknesses of different methods in preparing SERS substrates. Closely related to the application of SERS in the analysis of trace sample and unknown systems, the existing cleaning methods for SERS substrates are analyzed and a combined chemical adsorption and electrochemical oxidation method is proposed to eliminate the interference of contaminants. A defocusing method is proposed to deal with the laser-induced sample decomposition problem frequently met in SERS measurement to obtain strong signals. The existing methods to estimate the surface enhancement factor, a criterion to characterize the SERS activity of a substrate, are analyzed and some guidelines are proposed to obtain the correct enhancement factor.