Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂⋅(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm⁻² at 0.55 V vs. RHE.     

GOx@ZIF‐8(NiPd) Nanoflower: An Artificial Enzyme System for Tandem Catalysis

We report a facile approach to prepare an artificial enzyme system for tandem catalysis. NiPd hollow nanoparticles and glucose oxidase (GOx) were simultaneously immobilized on the zeolitic imidazolate framework 8 (ZIF‐8) via a co‐precipitation method. The as‐prepared GOx@ZIF‐8(NiPd) nanoflower not only exhibited the peroxidase‐like activity of NiPd hollow nanoparticles but also maintained the enzymatic activity of GOx. A colorimetric sensor for rapid detection of glucose was realized through the GOx@ZIF‐8(NiPd) based multi‐enzyme system. Moreover, the GOx@ZIF‐8(NiPd) modified electrode showed good bioactivity of GOx and high electrocatalytic activity for the oxygen reduction reaction (ORR), which could also be used for electrochemical detection of glucose.     

Effective and Selective Catalysts for Cinnamaldehyde Hydrogenation: Hydrophobic Hybrids of Metal–Organic Frameworks,Metal Nanoparticles,and Micro‐ and Mesoporous Polymers

Metal–organic frameworks (MOFs) as selectivity regulators for catalytic reactions have attracted much attention, especially MOFs and metal nanoparticle (NP) shelled structures, e.g., MOFs@NPs@MOFs. Nevertheless, making hydrophilic MOF shells for gathering hydrophobic reactants is challenging. Described here is a new and viable approach employing conjugated micro‐ and mesoporous polymers with iron(III) porphyrin (FeP‐CMPs) as a new shell to fabricate MIL‐101@Pt@FeP‐CMP. It is not only hydrophobic and porous for enriching reactants, but also possesses iron sites to activate C=O bonds, thereby regulating the selectivity for cinnamyl alcohol in the hydrogenation of cinnamaldehyde. Interestingly, MIL‐101@Pt@FeP‐CMP^sponge can achieve a high turnover frequency ( 1516.1 h⁻¹), with 97.3 % selectivity for cinnamyl alcohol at 97.6 % conversion.     

Surface Modification of Two‐Dimensional Metal–Organic Layers Creates Biomimetic Catalytic Microenvironments for Selective Oxidation

Microenvironments in enzymes play crucial roles in controlling the activities and selectivities of reaction centers. Herein we report the tuning of the catalytic microenvironments of metal–organic layers (MOLs), a two‐dimensional version of metal–organic frameworks (MOFs) with thickness down to a monolayer, to control product selectivities. By modifying the secondary building units (SBUs) of MOLs with monocarboxylic acids, such as gluconic acid, we changed the hydrophobicity/hydrophilicity around the active sites and fine‐tuned the selectivity in photocatalytic oxidation of tetrahydrofuran (THF) to exclusively afford butyrolactone (BTL), likely a result of prolonging the residence time of reaction intermediates in the hydrophilic microenvironment of catalytic centers. Our work highlights new opportunities in using functional MOLs as highly tunable and selective two‐dimensional catalytic materials.     

Selective Aerobic Oxidation of a Metal–Organic Framework Boosts Thermodynamic and Kinetic Propylene/Propane Selectivity

Efficient adsorptive separation of propylene/propane (C₃H₆/C₃H₈) is highly desired and challenging. Known strategies focus on either the thermodynamic or the kinetic mechanism. Here, we report an interesting reactivity of a metal–organic framework that improves thermodynamic and kinetic adsorption selectivity simultaneously. When the metal–organic framework is heated under oxygen flow, half of the soft methylene bridges of the organic ligands are selectively oxidized to form the more polar and rigid carbonyl bridges. Mixture breakthrough experiments showed drastic increase of C₃H₆/C₃H₈ selectivity from 1.5 to 15. For comparison, the C₃H₆/C₃H₈ selectivities of the best‐performing metal–organic frameworks Co‐MOF‐74 and KAUST‐7 were experimentally determined to be 6.5 and 12, respectively. Gas adsorption isotherms/kinetics, single‐crystal X‐ray diffraction, and computational simulations revealed that the oxidation gives additional guest recognition sites, which improve thermodynamic selectivity, and reduces the framework flexibility, which generate kinetic selectivity.     

Boosting Electrochemical CO2 Reduction on Metal–Organic Frameworks via Ligand Doping

Electrochemical CO₂ reduction relies on the availability of highly efficient and selective catalysts. Herein, we report a general strategy to boost the activity of metal–organic frameworks (MOFs) towards CO₂ reduction via ligand doping. A strong electron‐donating molecule of 1,10‐phenanthroline was doped into Zn‐based MOFs of zeolitic imidazolate framework‐8 (ZIF‐8) as CO₂ reduction electrocatalyst. Experimental and theoretical evidences reveal that the electron‐donating nature of phenanthroline enables a charge transfer, which induces adjacent active sites at the sp² C atoms in the imidazole ligand possessing more electrons, and facilitates the generation of *COOH, hence leading to improved activity and Faradaic efficiency towards CO production.     

In Situ Generation of an N‐Heterocyclic Carbene Functionalized Metal–Organic Framework by Postsynthetic Ligand Exchange: Efficient and Selective Hydrosilylation of CO2

The reported metal–organic framework (MOF) catalyst realizes CO₂ to methanol transformation under ambient conditions. The MOF is one rare example containing metal‐free N‐heterocyclic carbene (NHC) moieties, which are installed using an in situ generation strategy involving the incorporation of an imidazolium bromide based linker into the MOF by postsynthetic ligand exchange. Importantly, the resultant NHC‐functionalized MOF is the first catalyst capable of performing quantitative hydrogen transfer from silanes to CO₂, thus achieving quantitative (>99 %) methanol yield. Density‐functional theory calculations indicate the high catalytic activity of the NHC sites in MOFs are attributed to the decreased reaction barrier of a reaction route involving the formation of an NHC‐silane adduct. In addition, the MOF‐immobilized NHC catalyst shows enhanced stability for up to eight cycles without base activation, as well as high selectivity towards the desired silyl methoxide product.     

Structural Transformation in Metal–Organic Frameworks for Reversible Binding of Oxygen

Polycyclic aromatic derivatives can trap ¹O₂ to form endoperoxides (EPOs) for O₂ storage and as sources of reactive oxygen species. However, these materials suffer from structural amorphism, which limit both practical applications and fundamental studies on their structural optimization for O₂ capture and release. Metal–organic frameworks (MOFs) offer advantages in O₂ binding, such as clear structure–performance relationships and precise controllability. Herein, we report the reversible binding of O₂ is realized via the chemical transformation between anthracene‐based and the corresponding EPO‐based MOF. It is shown that anthracene‐based MOF, the framework featuring linkers with polycyclic aromatic structure, can rapidly trap ¹O₂ to form EPOs and can be restored upon UV irradiation or heating to release O₂. Furthermore, we confirm that photosensitizer‐incorporated anthracene‐based MOF are promising candidates for reversible O₂ carriers controlled by switching Vis/UV irradiation.     

Control of Metal–Organic Framework Crystallization by Metastable Intermediate Pre‐equilibrium Species

There is an increasing amount of interest in metal–organic frameworks (MOFs) for a variety of applications, from gas sensing and separations to electronics and catalysis. However, the mechanisms by which they crystallize remain poorly understood. Herein, an important new insight into MOF formation is reported. It is shown that, prior to network assembly, crystallization intermediates in the canonical ZIF‐8 system exist in a dynamic pre‐equilibrium, which depends on the reactant concentrations and the progress of reaction. Concentration can, therefore, be used as a synthetic handle to directly control particle size, with potential implications for industrial scale‐up and gas sorption applications. These findings enable the rationalization of apparent contradictions between previous studies of ZIF‐8 and opens up new opportunities for the control of crystallization in network solids more generally.     

Hierarchical Corannulene‐Based Materials: Energy Transfer and Solid‐State Photophysics

We report the first example of a donor–acceptor corannulene‐containing hybrid material with rapid ligand‐to‐ligand energy transfer (ET). Additionally, we provide the first time‐resolved photoluminescence (PL) data for any corannulene‐based compounds in the solid state. Comprehensive analysis of PL data in combination with theoretical calculations of donor–acceptor exciton coupling was employed to estimate ET rate and efficiency in the prepared material. The ligand‐to‐ligand ET rate calculated using two models is comparable with that observed in fullerene‐containing materials, which are generally considered for molecular electronics development. Thus, the presented studies not only demonstrate the possibility of merging the intrinsic properties of π‐bowls, specifically corannulene derivatives, with the versatility of crystalline hybrid scaffolds, but could also foreshadow the engineering of a novel class of hierarchical corannulene‐based hybrid materials for optoelectronic devices.     

Organ Repair,Hemostasis, and In Vivo Bonding of Medical Devices by Aqueous Solutions of Nanoparticles

Sutures are traumatic to soft connective tissues, such as liver or lungs. Polymer tissue adhesives require complex in vivo control of polymerization or cross‐linking reactions and currently suffer from being toxic, weak, or inefficient within the wet conditions of the body. Herein, we demonstrate using Stöber silica or iron oxide nanoparticles that nanobridging, that is, adhesion by aqueous nanoparticle solutions, can be used in vivo in rats to achieve rapid and strong closure and healing of deep wounds in skin and liver. Nanoparticles were also used to fix polymer membranes to tissues even in the presence of blood flow, such as occurring after liver resection, yielding permanent hemostasis within a minute. Furthermore, medical devices and tissue engineering constructs were fixed to organs such as a beating heart. The simplicity, rapidity, and robustness of nanobridging bode well for clinical applications, surgery, and regenerative medicine.     

Well‐Arranged and Confined Incorporation of PdCo Nanoparticles within a Hollow and Porous Metal–Organic Framework for Superior Catalytic Activity

A convenient method for the confined incorporation of highly active bimetallic PdCo nanocatalysts within a hollow and porous metal–organic framework (MOF) support is presented. Several chemical conversions occur simultaneously during the one‐step low temperature pyrolysis of well‐designed polystyrene@ZIF‐67/Pd²⁺ core–shell microspheres, where ZIF (zeolitic imidazolate framework) is a subclass of MOF: the polystyrene core is removed, resulting in a beneficial hollow and porous ZIF support; the ZIF‐67 shell acts as a well‐defined porous support and as a felicitous Co²⁺ supplier for metal nanoparticle formation; and Pd²⁺ and Co²⁺ are reduced to form catalytically active bimetallic PdCo nanoparticles in the well‐defined micropores, inducing the confined growth of PdCo nanoparticles with excellent dispersity.     

Fulleretic Well‐Defined Scaffolds: Donor–Fullerene Alignment Through Metal Coordination and Its Effect on Photophysics

Herein, we report the first example of a crystalline metal–donor–fullerene framework, in which control of the donor–fullerene mutual orientation was achieved through chemical bond formation, in particular, by metal coordination. The ¹³C cross‐polarization magic‐angle spinning NMR spectroscopy, X‐ray diffraction, and time‐resolved fluorescence spectroscopy were performed for comprehensive structural analysis and energy‐transfer (ET) studies of the fulleretic donor–acceptor scaffold. Furthermore, in combination with photoluminescence measurements, the theoretical calculations of the spectral overlap function, Förster radius, excitation energies, and band structure were employed to elucidate the photophysical and ET processes in the prepared fulleretic material. We envision that the well‐defined fulleretic donor–acceptor materials could contribute not only to the basic science of fullerene chemistry but would also be used towards effective development of organic photovoltaics and molecular electronics.     

Programmed Release of Dihydroartemisinin for Synergistic Cancer Therapy Using a CaCO3 Mineralized Metal–Organic Framework

Dihydroartemisinin (DHA) has attracted increasing attention as an anticancer agent. However, using DHA to treat cancer usually depends on the synergistic effects of exogenous components, and the loss of DHA during delivery reduces its effectiveness in cancer therapy. Reported herein is a programmed release nanoplatform of DHA to synergistically treat cancer with a Fe‐TCPP [(4,4,4,4‐(porphine‐5,10,15,20‐tetrayl) tetrakis(benzoic acid)] NMOF (nanoscale MOF) having a CaCO₃ mineralized coating, which prevents DHA leakage during transport in the bloodstream. When the nanoplatform arrives at the tumor site, the weakly acidic microenvironment and high concentration of glutathione (GSH) trigger DHA release and TCPP activation, enabling the synergistic Fe²⁺‐DHA‐mediated chemodynamic therapy, Ca²⁺‐DHA‐mediated oncosis therapy, and TCPP‐mediated photodynamic therapy. In vivo experiments demonstrated that the nanoplatform showed enhanced anticancer efficiency and negligible toxicity.