The Adsorption and Simulated Separation of Light Hydrocarbons in Isoreticular Metal–Organic Frameworks Based on Dendritic Ligands with Different Aliphatic Side Chains

Three isoreticular metal–organic frameworks, JUC‐100, JUC‐103 and JUC‐106, were synthesized by connecting six‐node dendritic ligands to a [Zn₄O(CO₂)₆] cluster. JUC‐103 and JUC‐106 have additional methyl and ethyl groups, respectively, in the pores with respect to JUC‐100. The uptake measurements of the three MOFs for CH₄, C₂H₄, C₂H₆ and C₃H₈ were carried out. At 298 K, 1 atm, JUC‐103 has relatively high CH₄ uptake, but JUC‐100 is the best at 273 K, 1 atm. JUC‐100 and JUC‐103 have similar C₂H₄ absorption ability. In addition, JUC‐100 has the best absorption capacity for C₂H₆ and C₃H₈. These results suggest that high surface area and appropriate pore size are important factors for gas uptake. Furthermore, ideal adsorbed solution theory (IAST) analyses show that all three MOFs have good C₃H₈/CH₄ and C₂H₆/CH₄ selectivities for an equimolar quaternary CH₄/C₂H₄/C₂H₆/C₃H₈ gas mixture maintained at isothermal conditions at 298 K, and JUC‐106 has the best C₂H₆/CH₄ selectivity. The breakthrough simulations indicate that all three MOFs have good capability for separating C2 hydrocarbons from C3 hydrocarbons. The pulse chromatographic simulations also indicate that all three MOFs are able to separate CH₄/C₂H₄/C₂H₆/C₃H₈ mixture into three different fractions of C1, C2 and C3 hydrocarbons.     

Microporous Magnesium and Manganese Formates for Acetylene Storage and Separation

Acetylene sorption of microporous metal formates M(HCOO)₂ (M=Mg and Mn) was investigated. Measurements of acetylene sorption at 196, 275, and 298 K showed a Type I isotherm with quick saturation at low pressures, and 50–75 cm³ g^?1 uptake at 1.0 atm. The single‐crystal X‐ray structure analysis of the acetylene‐adsorbed metal formates revealed that acetylene molecules occupy two independent positions in the zigzag channels of the frameworks with a stoichiometry of M(HCOO)₂?1/3C₂H₂, which is consistent with the gas sorption experiments. No specific interaction except van der Waals interactions between the adsorbed acetylene molecules and the walls of the frameworks was found. Sorption properties of other gases, including CO₂, CH₄, N₂, O₂, and H₂, were also investigated. When the temperature was increased to 298 K, the amount of adsorbed acetylene was still above 60 cm³ g^?1 for Mg(HCOO)₂ and 50 cm³ g^?1 for Mn(HCOO)₂, whereas the uptake of other gases decreased substantially. The microporous metal formates may thus be useful not only for the storage of acetylene but also its separation from other gases at room or slightly higher temperatures.     

De-Linker-Enabled Exceptional Volumetric Acetylene Storage Capacity and Benchmark C2H2/C2H4 and C2H2/CO2 Separations in Metal–Organic Frameworks

An ideal adsorbent for separation requires optimizing both storage capacity and selectivity, but maximizing both or achieving a desired balance remain challenging. Herein, a de-linker strategy is proposed to address this issue for metal–organic frameworks (MOFs). Broadly speaking, the de-linker idea targets a class of materials that may be viewed as being intermediate between zeolites and MOFs. Its feasibility is shown here by a series of ultra-microporous MOFs (SNNU-98-M, M=Mn, Co, Ni, Zn). SNNU-98 exhibit high volumetric C₂H₂ uptake capacity under low and ambient pressures (175.3 cm³ cm⁻³ @ 0.1 bar, 222.9 cm³ cm⁻³ @ 1 bar, 298 K), as well as extraordinary selectivity (2405.7 for C₂H₂/C₂H₄, 22.7 for C₂H₂/CO₂). Remarkably, SNNU-98-Mn can efficiently separate C₂H₂ from C₂H₂/CO₂ and C₂H₂/C₂H₄ mixtures with a benchmark C₂H₂/C₂H₄ (1/99) breakthrough time of 2325 min g⁻¹, and produce 99.9999 % C₂H₄ with a productivity up to 64.6 mmol g⁻¹, surpassing values of reported MOF adsorbents.     

High CO2‐Capture Ability of a Porous Organic Polymer Bifunctionalized with Carboxy and Triazole Groups

A new porous organic polymer, SNU‐C1 , incorporating two different CO₂‐attracting groups, namely, carboxy and triazole groups, has been synthesized. By activating SNU‐C1 with two different methods, vacuum drying and supercritical‐CO₂ treatment, the guest‐free phases, SNU‐C1‐va and SNU‐C1‐sca , respectively, were obtained. Brunauer–Emmett–Teller (BET) surface areas of SNU‐C1‐va and SNU‐C1‐sca are 595 and 830 m²g^?1, respectively, as estimated by the N₂‐adsorption isotherms at 77 K. At 298 K and 1 atm, SNU‐C1‐va and SNU‐C1‐sca show high CO₂ uptakes, 2.31 mmol g^?1 and 3.14 mmol g^?1, respectively, the high level being due to the presence of abundant polar groups (carboxy and triazole) exposed on the pore surfaces. Five separation parameters for flue gas and landfill gas in vacuum‐swing adsorption were calculated from single‐component gas‐sorption isotherms by using the ideal adsorbed solution theory (IAST). The data reveal excellent CO₂‐separation abilities of SNU‐C1‐va and SNU‐C1‐sca , namely high CO₂‐uptake capacity, high selectivity, and high regenerability. The gas‐cycling experiments for the materials and the water‐treated samples, experiments that involved treating the samples with a CO₂‐N₂ gas mixture (15:85, v/v) followed by a pure N₂ purge, further verified the high regenerability and water stability. The results suggest that these materials have great potential applications in CO₂ separation.     

A C3‐Symmetric Macrocycle‐Based,Hydrogen‐Bonded,Multiporous Hexagonal Network as a Motif of Porous Molecular Crystals

A C₃‐symmetric π‐conjugated macrocycle combined with an appropriate hydrogen bonding module (phenylene triangle) allowed the construction of crystalline supramolecular frameworks with a cavity volume of up to 58 %. The frameworks were obtained through non‐interpenetrated stacking of a hexagonal sheet possessing three kinds of pores with different sizes and shapes. The activated porous material absorbed CO₂ up to 96 cm³ g^?1 at 195 K under 1 atm.     

Framework Cationization by Preemptive Coordination of Open Metal Sites for Anion‐Exchange Encapsulation of Nucleotides and Coenzymes

Cationic frameworks can selectively trap anions through ion exchange, and have applications in ion chromatography and drug delivery. However, cationic frameworks are much rarer than anionic or neutral ones. Herein, we propose a concept, preemptive coordination (PC), for targeting positively charged metal–organic frameworks (P‐MOFs). PC refers to proactive blocking of metal coordination sites to preclude their occupation by neutralizing ligands such as OH^?. We use 20 MOFs to show that this PC concept is an effective approach for developing P‐MOFs whose high stability, porosity, and anion‐exchange capability allow immobilization of anionic nucleotides and coenzymes, in addition to charge‐ and size‐selective capture or separation of organic dyes. The CO₂ and C₂H₂ uptake capacity of 117.9 cm³ g^?1 and 148.5 cm³ g^?1, respectively, at 273 K and 1 atm, is exceptionally high among cationic framework materials.     

Covalent and electrostatic incorporation of amines into hypercrosslinked polymers for increased CO2 selectivity

Two methods of incorporating functional groups rich in nitrogen into low cost microporous hypercrosslinked polymers (HCPs) have been evaluated and the effects on the carbon dioxide CO₂/N₂ IAST selectivity were measured. Electrostatic incorporation of an ammonium salt into a sulfonic acid-containing HCP polymer afforded a static CO₂ uptake of 2.5 mmol g⁻¹ with a CO₂/N₂ IAST selectivity of 42:1 at 1 bar and 298 K. Using column breakthrough measurements with a 15:85 CO₂/N₂ mixture at 298 K and 1 bar, a selectivity of 17:1 was obtained. However, varying the counterion resulted in polymers with lower CO₂/N₂ selectivity values. Decoration of the parent polymer with CO₂-philic imidazole followed by electrostatic ammonium salt incorporation blocked some of the micropores reducing the selectivity which re-emphasizes the role and importance of pore width for CO₂/N₂ selectivity. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2513–2521     

A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C2 Hydrocarbons and CO2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′-dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore-space partition. The Co₂V-pacs MOFs exhibit near or at record high uptake capacities for C₂H₂, C₂H₄, C₂H₆, and CO₂ among MOFs. The storage capacity of C₂H₂ is 234 cm³ g⁻¹ (298 K) and 330 cm³ g⁻¹ (273 K) at 1 atm for CPM-733-dps (the Co₂V-BDC form, BDC=1,4-benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C₂H₂ adsorption capacity following multiple adsorption–desorption cycles.     

Tuning Pore Polarization to Boost Ethane/Ethylene Separation Performance in Hydrogen-Bonded Organic Frameworks

Hydrogen-bonded organic frameworks (HOFs) show great potential in energy-saving C₂H₆/C₂H₄ separation, but there are few examples of one-step acquisition of C₂H₄ from C₂H₆/C₂H₄ because it is still difficult to achieve the reverse-order adsorption of C₂H₆ and C₂H₄. In this work, we boost the C₂H₆/C₂H₄ separation performance in two graphene-sheet-like HOFs by tuning pore polarization. Upon heating, an in situ solid phase transformation can be observed from HOF-NBDA(DMA) (DMA=dimethylamine cation) to HOF-NBDA , accompanied with transformation of the electronegative skeleton into neutral one. As a result, the pore surface of HOF-NBDA has become nonpolar, which is beneficial to selectively adsorbing C₂H₆. The difference in the capacities for C₂H₆ and C₂H₄ is 23.4 cm³ g⁻¹ for HOF-NBDA , and the C₂H₆/C₂H₄ uptake ratio is 136 %, which are much higher than those for HOF-NBDA(DMA) (5.0 cm³ g⁻¹ and 108 % respectively). Practical breakthrough experiments demonstrate HOF-NBDA could produce polymer-grade C₂H₄ from C₂H₆/C₂H₄ (1/99, v/v) mixture with a high productivity of 29.2 L kg⁻¹ at 298 K, which is about five times as high as HOF-NBDA(DMA) (5.4 L kg⁻¹). In addition, in situ breakthrough experiments and theoretical calculations indicate the pore surface of HOF-NBDA is beneficial to preferentially capture C₂H₆ and thus boosts selective separation of C₂H₆/C₂H₄.     

Directing the Structural Features of N2‐Phobic Nanoporous Covalent Organic Polymers for CO2 Capture and Separation

A family of azo‐bridged covalent organic polymers (azo‐COPs) was synthesized through a catalyst‐free direct coupling of aromatic nitro and amine compounds under basic conditions. The azo‐COPs formed 3D nanoporous networks and exhibited surface areas up to 729.6 m² g^?1, with a CO₂‐uptake capacity as high as 2.55 mmol g^?1 at 273 K and 1 bar. Azo‐COPs showed remarkable CO₂/N₂ selectivities (95.6–165.2) at 298 K and 1 bar. Unlike any other porous material, CO₂/N₂ selectivities of azo‐COPs increase with rising temperature. It was found that azo‐COPs show less than expected affinity towards N₂ gas, thus making the framework “N₂‐phobic”, in relative terms. Our theoretical simulations indicate that the origin of this unusual behavior is associated with the larger entropic loss of N₂ gas molecules upon their interaction with azo‐groups. The effect of fused aromatic rings on the CO₂/N₂ selectivity in azo‐COPs is also demonstrated. Increasing the π‐surface area resulted in an increase in the CO₂‐philic nature of the framework, thus allowing us to reach a CO₂/N₂ selectivity value of 307.7 at 323 K and 1 bar, which is the highest value reported to date. Hence, it is possible to combine the concepts of “CO₂‐philicity” and “N₂‐phobicity” for efficient CO₂ capture and separation. Isosteric heats of CO₂ adsorption for azo‐COPs range from 24.8–32.1 kJ mol^?1 at ambient pressure. Azo‐COPs are stable up to 350 °C in air and boiling water for a week. A promising cis/trans isomerization of azo‐COPs for switchable porosity is also demonstrated, making way for a gated CO₂ uptake.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

Topological Design of Unprecedented Metal-Organic Frameworks Featuring Multiple Anion Functionalities and Hierarchical Porosity for Benchmark Acetylene Separation

Separation of acetylene (C₂H₂) from carbon dioxide (CO₂) or ethylene (C₂H₄) is industrially important but still challenging so far. Herein, we developed two novel robust metal organic frameworks AlFSIX-Cu-TPBDA (ZNU-8) with znv topology and SIFSIX-Cu-TPBDA (ZNU-9) with wly topology for efficient capture of C₂H₂ from CO₂ and C₂H₄. Both ZNU-8 and ZNU-9 feature multiple anion functionalities and hierarchical porosity. Notably, ZNU-9 with more anionic binding sites and three distinct cages displays both an extremely large C₂H₂ capacity (7.94 mmol/g) and a high C₂H₂/CO₂ (10.3) or C₂H₂/C₂H₄ (11.6) selectivity. The calculated capacity of C₂H₂ per anion (4.94 mol/mol at 1 bar) is the highest among all the anion pillared metal organic frameworks. Theoretical calculation indicated that the strong cooperative hydrogen bonds exist between acetylene and the pillared SiF₆²⁻ anions in the confined cavity, which is further confirmed by in situ IR spectra. The practical separation performance was explicitly demonstrated by dynamic breakthrough experiments with equimolar C₂H₂/CO₂ mixtures and 1/99 C₂H₂/C₂H₄ mixtures under various conditions with excellent recyclability and benchmark productivity of pure C₂H₂ (5.13 mmol/g) or C₂H₄ (48.57 mmol/g).     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

Dynamic Entangled Porous Framework for Hydrocarbon (C2–C3) Storage,CO2 Capture,and Separation

Storage and separation of small (C1–C3) hydrocarbons are of great significance as these are alternative energy resources and also can be used as raw materials for many industrially important materials. Selective capture of greenhouse gas, CO₂ from CH₄ is important to improve the quality of natural gas. Among the available porous materials, MOFs with permanent porosity are the most suitable to serve these purposes. Herein, a two‐fold entangled dynamic framework {[Zn₂(bdc)₂(bpNDI)]?4DMF}_n with pore surface carved with polar functional groups and aromatic π clouds is exploited for selective capture of CO₂, C2, and C3 hydrocarbons at ambient condition. The framework shows stepwise CO₂ and C₂H₂ uptake at 195 K but type I profiles are observed at 298 K. The IAST selectivity of CO₂ over CH₄ is the highest (598 at 298 K) among the MOFs without open metal sites reported till date. It also shows high selectivity for C₂H₂, C₂H₄, C₂H₆, and C₃H₈ over CH₄ at 298 K. DFT calculations reveal that aromatic π surface and the polar imide (RNC=O) functional groups are the primary adsorption sites for adsorption. Furthermore, breakthrough column experiments showed CO₂/CH₄ C₂H₆/CH₄ and CO₂/N₂ separation capability at ambient condition.     

Charge Control in Two Isostructural Anionic/Cationic CoII Coordination Frameworks for Enhanced Acetylene Capture

Two isostructural Co^II‐based metal–organic frameworks (MOFs) with the opposite framework charges have been constructed, which can be simply controlled by changing the tetrazolyl or triazolyl terminal in two bifunctional ligands. Notably, the cationic MOF 2 can adsorb much more C₂H₂ than the anionic MOF 1 with an increase of 88 % for C₂H₂ uptake at 298 K in spite of more active nitrogen sites in 1 . Theoretical calculations indicate that both nitrate and triazolyl play vital roles in C₂H₂ binding and the C₂H₂ adsorption isotherm confirms that the enhanced C₂H₂ uptake for 2 (225 and 163 cm³g^?1 at 273 and 298 K) is exceptionally high for MOF materials without open metal sites or uncoordinated polar atom groups on the frameworks.     

A C3‐Symmetric Macrocycle‐Based,Hydrogen‐Bonded,Multiporous Hexagonal Network as a Motif of Porous Molecular Crystals

A C₃‐symmetric π‐conjugated macrocycle combined with an appropriate hydrogen bonding module (phenylene triangle) allowed the construction of crystalline supramolecular frameworks with a cavity volume of up to 58 %. The frameworks were obtained through non‐interpenetrated stacking of a hexagonal sheet possessing three kinds of pores with different sizes and shapes. The activated porous material absorbed CO₂ up to 96 cm³ g⁻¹ at 195 K under 1 atm.     

A Flexible Pro‐porous Coordination Polymer: Non‐conventional Synthesis and Separation Properties Towards CO2/CH4 Mixtures

The novel coordination polymers [Cu(Hoxonic)(H₂O)]_n ( 1 ) and [Cu(Hoxonic)(bpy)_0.5]_n ? 1.5 n H₂O ( 2?H₂O ) (H₃oxonic: 4,6‐dihydroxy‐1,3,5‐triazine‐2‐carboxylic acid; bpy: 4,4′‐bipyridine) have been isolated and structurally characterised by ab initio X‐ray powder diffraction. The dense phase 1 contains 1D zig‐zag chains in which Hoxonic dianions bridge square‐pyramidal copper(II) ions, apically coordinated by water molecules. On the contrary, 2?H₂O , prepared by solution and solventless methods, is based on 2D layers of octahedral copper(II) ions bridged by Hoxonic ligands, further pillared by bpy spacers. The resulting pro‐porous 3D network possesses small hydrated cavities. The reactivity, thermal, magnetic and adsorptive properties of these materials have been investigated. Notably, the adsorption studies on 2 show that this material possesses unusual adsorption behaviour. Indeed, guest uptake is facilitated by increasing the thermal energy of both the guest and the framework. Thus, neither N₂ at 77 K nor CO₂ at 195 K are incorporated, and CH₄ is only minimally adsorbed at 273 K and high pressures (0.5 mmol g^?1 at 2500 kPa). By contrast, CO₂ is readily incorporated at 273 K (up to 2.5 mmol g^?1 at 2500 kPa). The selectivity of 2 towards CO₂ over CH₄ has been investigated by means of variable‐temperature zero coverage adsorption experiments and measurement of breakthrough curves of CO₂/CH₄ mixtures. The results show the highly selective incorporation of CO₂ in 2 , which can be rationalised on the basis of the framework flexibility and polar nature of its voids.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.