Amperometric Biosensor Based on Enzymatic Reactor for Choline Determination in Flow Systems

A simple, selective and stable biosensor with the enzymatic reactor based on choline oxidase (ChOx) was developed and applied for the determination of choline (Ch) in flow injection analysis with amperometric detection. The enzyme ChOx was covalently immobilized with glutaraldehyde to mesoporous silica powder (SBA‐15) previously covered by NH₂‐groups. This powder was found as an optimal filling of the reactor. The detection of Ch is based on amperometric monitoring of consumed oxygen during the enzymatic reaction, which is directly proportional to Ch concentration. Two arrangements of an electrolytic cell in FIA, namely wall‐jet cell with working silver solid amalgam electrode covered by mercury film and flow‐through cell with tubular detector of polished silver solid amalgam were compared. The experimental parameters affecting the sensitivity and stability of the biosensor (i. e. pH of the carrier solution, volume of reactor, amount of the immobilized enzyme, the detection potential, flow rate, etc.) were optimized. Under the optimized conditions, the limit of detection was found to be 9.0×10^?6 mol L^?1. The Michaelis‐Menten constant for covalently immobilized ChOx on SBA‐15 was calculated. The proposed amperometric biosensor with the developed ChOx‐based reactor exhibits good repeatability, reproducibility, long‐term stability, and reusability. Its efficiency has been confirmed by the successful application for the determination of Ch in two commercial pharmaceuticals.     

Electrochemical Biosensors Based on Enzymatic Reactors Filled by Various Types of Silica and Amalgam Powders for Measurements in Flow Systems

Two enzymatic biosensors with amalgam powder reactors and twelve enzymatic biosensors with various silica powder reactors were fabricated and tested in this work. The enzymatic reactors based on silver amalgam powder provide high sensitivity and they are convenient for faster flow rates. Experiments with six silica materials showed that mesoporous silica SBA‐15 was the best one in terms of covering by enzymes, sensitivity and lifetime of biosensors. The current response of the SBA15‐glucose oxidase (GOx) sensor started to decrease only after 200 day testing and after 406 days the peak current was still 35.9 % of the initial value. The used amalgam tubular detector in a flow system allowed working at highly negative potentials, which significantly increased the sensitivity of determinations. Statistical results of parallel measurement of model solutions with the fabricated biosensors show their high accuracy (RSD=0.28–1.81 %) and sensitivity (6.2–14.3 µmol L^?1). The proposed SBA15‐GOx biosensor was successfully used for determination of glucose in commercial honey.     

气相色谱用微波诱导氩等离子体光离子化检测器的研究

本文报道了以Surfatron 表面波为激发器件的微波诱导氩等离子体光离子化检测器,以氩气为载气和工作气体,研究了三种不同类型检测器的结构性能, 通过测量检测器的工作参数及苯的检出限等,对检测器的基本特性和离子化机理进行了探讨,并应用于实际样品分析,结果令人满意     

The Effects of the Electrode System Geometry on the Properties of Contactless Conductivity Detectors for Capillary Electrophoresis

The basic analytical parameters of contactless conductivity detectors with planar, semi‐tubular and tubular electrodes have been compared. It has been found that the differences in the analytical parameters of the detectors are not significant for analytical use. The mean values of baseline peak‐to‐peak noise of 0.27, 0.35 and 0.33 mV, sensitivities of 0.97, 2.08 and 2.27 mV/pg (for K⁺ ion), limits of detection of 0.93, 0.65 and 0.53, and the heights equivalent to a theoretical plate of 2.83, 2.39 and 2.40 μm were obtained for the detectors with planar, semi/tubular and tubular electrodes, respectively. Modifications of the basic detectors, namely a detector with thinned capillary wall and planar electrodes, and a detector with semi‐tubular electrodes placed one against the other on the opposite sides of the capillary were also tested. The configuration with the electrodes placed one against the other permits detector construction with zero gap between the electrodes without increasing the noise; when the electrodes overlap, the detector begins to operate as a permittivity detector.     

Tubular Detector of Silver Solid Amalgam for Electrochemical Measurements in Flow Systems

This paper presents the application of the tubular detector based on silver solid amalgam (TD‐AgSA) for electrochemical determinations of reducible inorganic (Cd²⁺, Zn²⁺) and organic (4‐nitrophenol) compounds under flow injection analysis conditions. The newly developed TD‐AgSA is simple, robust and inexpensive. The limits of detections of Zn²⁺, Cd²⁺ and 4‐nitrophenol are 1.4×10^?6, 7.0×10^?7, and 5.0×10^?7 mol dm^?3, respectively (i.e. 0.09, 0.08 and 0.07 ppm). The obtained results proved the long‐term stability of the detector (RSD of the determination of Zn²⁺, Cd²⁺, and 4‐nitrophenol were 0.8, 0.9 and 0.8 % (n=10; c_Zn=7.7×10^?5 mol dm^?3, c_Cd=4.5×10^?5 mol dm^?3 and c_4‐NPh=3.6×10^?5 mol dm^?3), respectively and its applicability for cathodic measurements in aqueous solutions at potentials up to ?2 V.     

Mercury meniscus on solid silver amalgam electrode as a sensitive electrochemical sensor for tetrachlorvinphos

The in-house prepared mercury meniscus modified solid silver amalgam electrode (m-AgSAE) was successfully applied for the detection of organophosphate pesticide tetrachlorvinphos in pH 7 buffer solution. The electrochemical performance of m-AgSAE for the reduction of tetrachlorvinphos was evaluated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and square wave voltammetry (SWV), respectively. The surface morphology of solid silver electrode (AgE), as-amalgamated solid silver amalgam electrode (AgSAE), and polished solid silver amalgam electrode (p-AgSAE) was examined by field emission scanning electron microscopy (FESEM). Among the applied techniques, DPV and SWV analysis showed a remarkable increase in the reduction peak current and provided a simple, fast, and sensitive method for the determination of tetrachlorvinphos. The electrochemical impedance spectroscopy (EIS) was used to correlate the electrocatalytic activity of AgSAE, p-AgSAE and m-AgSAE with their interfacial charge transport capabilities. Under the optimized experimental conditions, the DPV and SWV responses were linear over the 1–9 μM and 10–50 μM concentration ranges with a detection limit of 0.06 μM for DPV and 0.04 for SWV. The estimation of tetrachlorvinphos in the ground and waste water samples with the proposed method was in good agreement with that of the added amount. The proposed electrochemical method not only extends the application of non-toxic m-AgSAE, but also offers new possibilities for fast and sensitive analysis of tetrachlorvinphos and its structural analogs in environmental samples.     

Voltammetric Determination of Trace Amounts of 2‐Methyl‐4,6‐Dinitrophenol at a Silver Solid Amalgam Electrode

The voltammetric behavior of 2‐methyl‐4,6‐dinitrophenol was investigated by differential pulse voltammetry (DPV) at a nontoxic mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.2 to 1 μmol L^?1.     

Voltammetric Determination of 4‐Nitrophenol Using a Novel Type of Silver Amalgam Paste Electrode

A differential pulse voltammetric (DPV) method was developed for the determination of 4‐nitrophenol (4‐NP) at a newly developed silver amalgam paste electrode (AgA‐PE) in Britton–Robinson buffer pH 3.0. The electrode is based on a disposable plastic pipette tip filled with paste amalgam based on a mixture of mercury and fine silver powder (9 : 1, w/w). The experimental parameters, such as pH of Britton–Robinson buffer and activation and regeneration potential of the electrode surface were optimized. The reduction peak current dependences were linear for the concentration of 4‐NP from 0.2 to 100 μM. The method showed reproducible results with RSD (n=45) of 1.7%. The limit of determination (LOD) was 0.3 μM. The method was successfully applied for the direct determination of 4‐NP in drinking water.     

Voltammetric Determination of 4‐Nitrophenol and 5‐Nitrobenzimidazole Using Different Types of Silver Solid Amalgam Electrodes – A Comparative Study

The voltammetric behavior of two genotoxic nitro compounds (4‐nitrophenol and 5‐nitrobenzimidazole) has been investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a polished silver solid amalgam electrode (p‐AgSAE), a mercury meniscus modified silver solid amalgam electrode (m‐AgSAE), and a mercury film modified silver solid amalgam electrode (MF‐AgSAE). The optimum conditions have been evaluated for their determination in Britton‐Robinson buffer solutions. The limit of quantification (L_Q) for 5‐nitrobenzimidazole at p‐AgSAE was 0.77 µmol L^?1 (DCV) and 0.47 µmol L^?1 (DPV), at m‐AgSAE it was 0.32 µmol L^?1 (DCV) and 0.16 µmol L^?1 (DPV), and at MF‐AgSAE it was 0.97 µmol L^?1 (DCV) and 0.70 µmol L^?1 (DPV). For 4‐nitrophenol at p‐AgSAE, L_Q was 0.37 µmol L^?1 (DCV) and 0.32 µmol L^?1 (DPV), at m‐AgSAE it was 0.14 µmol L^?1 (DCV) and 0.1 µmol L^?1 (DPV), and at MF‐AgSAE, it was 0.87 µmol L^?1 (DCV) and 0.37 µmol L^?1 (DPV). Thorough comparative studies have shown that m‐AgSAE is the best sensor for voltammetric determination of the two model genotoxic compounds because it gives the lowest L_Q, is easier to prepare, and its surface can be easily renewed both chemically (by new amalgamation) and/or electrochemically (by imposition of cleaning pulses). The practical applicability of the newly developed methods was verified on model samples of drinking water.     

Voltammetric Determination of N,N‐Dimethyl‐4‐amine‐carboxyazobenzene at a Silver Solid Amalgam Electrode

The voltammetric behavior of N,N‐dimethyl‐4‐amino‐2′‐carboxyazobenzene was investigated by differential pulse voltammetry (DPV) at a mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.4 to 15 μmol L^?1.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

Electrodeposition of Silver Amalgam on Thin Gold Film Electrodes for Voltammetric Detection of 4‐Nitrophenol and DNA Labeled with Osmium Tetroxide‐Bipyridine Complex

Alternative electrode materials suitable to prepare novel working electrode applicable in detecting biopolymers such as nucleic acids, proteins or glycoproteins, represent a significant contribution to bio‐electroanalysis. Herein, electrodes made of vapor‐deposited thin gold films (vAuE) were used as an alternative substrate for the electrodeposition of silver amalgam particles (AgAPs), next to indium tin oxide and pyrolytic graphite, which are already used. The conditions and parameters of double pulse chronoamperometry were optimized for the most‐sensitive voltammetric detection of 4‐nitrophenol (4‐NP). The resulting electrodes were characterized by scanning electron microscope with energy dispersive X‐ray spectroscopy. While 4‐NP could not be detected by bare nonactivated vAuEs at all, their electrochemical activation offered a limit of detection (LoD) of 25 and 5 μmol.l^?1 by means of CV and DPV, respectively. AgAP electrodeposited on vAuE, offered 2.5‐times lower LoDs 10 μmol.l^?1 by CV and comparable LoD 5 μmol.l^?1 by DPV. Advantageously, AgAPs could be repeatedly deposited on and anodically dissolved from the vAuE with a relative standard deviation 13 % of the ten‐times repeated DPV signal of 4‐NP (100 μmol.l^?1). In comparison to vAuE, the vAuE‐AgAP offered about 400 mV broader potential window, which allowed detection of single strand DNA fragment labeled by osmium tetroxide?bipyridine complex down to 2 ng.μl^?1 by means of DPV.     

Flow electrochemical biosensors based on enzymatic porous reactor and tubular detector of silver solid amalgam

A flow amperometric enzymatic biosensor for the determination of glucose was constructed. The biosensor consists of a flow reactor based on porous silver solid amalgam (AgSA) and a flow tubular detector based on compact AgSA. The preparation of the sensor and the determination of glucose occurred in three steps. First, a self-assembled monolayer of 11-mercaptoundecanoic acid (MUA) was formed at the porous surface of the reactor. Second, enzyme glucose oxidase (GOx) was covalently immobilized at MUA-layer using N-ethyl-N′-(3-dimethylaminopropyl) carboimide and N-hydroxysuccinimide chemistry. Finally, a decrease of oxygen concentration (directly proportional to the concentration of glucose) during enzymatic reaction was amperometrically measured on the tubular detector under flow injection conditions. The following parameters of glucose determination were optimized with respect to amperometric response: composition of the mobile phase, its concentration, the potential of detection and the flow rate. The calibration curve of glucose was linear in the concentration range of 0.02–0.80 mmol L⁻¹ with detection limit of 0.01 mmol L⁻¹. The content of glucose in the sample of honey was determined as 35.5 ± 1.0 mass % (number of the repeated measurements n = 7; standard deviation SD = 1.2%; relative standard deviation RSD = 3.2%) which corresponds well with the declared values. The tested biosensor proved good long-term stability (77% of the current response of glucose was retained after 35 days).     

Tubular and Microcylindrical Platinum Electrodes for Amperometric Detection of Aminobiphenyls and Aminonaphthalenes in HPLC

Platinum electrodes in microcylindrical and tubular arrangements were compared as working electrodes for amperometric detection of 2‐aminobiphenyl, 4‐aminobiphenyl, 1‐aminonaphthalene, and 2‐aminonaphthalene in HPLC. Factors influencing separation efficiency are favourable for microcylindrical arrangement while tubular arrangement exhibits higher sensitivities and lower limits of detection. These are in the range of 0.0078–0.027 µmol L^?1 for tubular, and 0.11–0.42 µmol L^?1 for microcylindrical arrangement. Further, a new method with nanomolar detection limits was proposed for determination of tested compounds in urine using solid phase extraction for preliminary separation and preconcentration of the analytes.     

Crystallic silver amalgam--a novel electrode material

A crystallic silver amalgam was found to be a suitable working electrode material for voltammetric determination of electrochemically reducible organic nitro-compounds. Optimum conditions for crystal growth were found, the crystal surface was investigated by atomic force microscopy in tapping mode and single crystals were used for the preparation of quasi-cylindrical single crystal silver amalgam electrode (CAgAE). An electrochemical behavior of this alternative electrode material was investigated in aqueous media by direct current voltammetry, cyclic voltammetry (CV), differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) using 4-nitrophenol as a model compound. Applicable potential windows of the CAgAE were found comparable with those obtained at a hanging mercury drop electrode, providing high hydrogen overpotential, and polished silver solid amalgam electrode. Thanks to the smooth single crystal electrode surface, the effect of the passivation is not too pronounced, direct DPV determination of 100 μmol l(-1) of 4-nitrophenol at CAgAEs in 0.2 mol l(-1) acetate buffer pH 4.8 provides a RSD around 1.5% (n = 15). DPV calibration curves of 4-nitrophenol are linear in the whole concentration range 1-100 μmol l(-1) with a limit of quantification of 1.5 μmol l(-1). The attempt to increase sensitivity by application of AdSV was not successful. The mechanism of 4-nitrophenol reduction at CAgAE was investigated by CV.     

Combining amperometry and mass spectrometry as a dual detection approach for capillary electrophoresis

Dual detection concepts (DDCs) are becoming more and more popular in analytical chemistry. In this work, we describe a novel DDC for capillary electrophoresis (CE) consisting of an amperometric detector (AD) and a mass spectrometer (MS). This detector combination has a good complementarity as the AD exhibits high sensitivity, whereas the MS provides excellent selectivity. Both detectors are based on a destructive detection principle, making a serial detector arrangement impossible. Thus, for the realization of the DDC, the CE flow was divided into two parts with a flow splitter. The DDC was characterized in a proof-of-concept study with ferrocene derivates and a nonaqueous background electrolyte. We could show that splitting the CE flow was a suitable method for the instrumental realization of the DDC consisting of two destructive detectors. By lowering the height of the AD compared to the MS, it was possible to synchronize the detector responses. Additionally, for the chosen model system, we confirmed that the AD was much more reproducible and had lower limits of detection (LODs) than the MS. The LODs were identical for the DDC and the single-detection arrangements, indicating no sensitivity decrease due to the CE flow splitting. The DDC was successfully applied to determine the drug and doping agent trimetazidine.     

Miniaturized Biamperometric Detectors for Electrochemical Detection in Flowing Streams

Capillary electrochemical detectors with various configurations of electrodes were developed by inserting platinum multielectrodes (tetrodes) or platinum and carbon microelectrodes into the ending of capillaries. The biamperometric mode of detection, without the need of classical reference electrode, was employed in flow injection analysis of dopamine and norepinephrine selected as model samples. The influences of geometric shape of tetrodes, arrangement of electrodes and internal diameter of the capillary were studied thoroughly with respect to intensity of recorded currents. A novel pulse biamperometric technique was employed with the aim to enhance further the recorded currents of dopamine oxidation and to minimize the passivation of electrodes in mixed aqueous‐organic carrier solution, which improved considerably the repeatability of measurements. Proposed low‐cost microelectrode devices showed good prospects as detectors in simple and miniaturized flow systems, such as flow injection analysis and capillary high‐performance liquid chromatography with monolithic columns.     

Dead volume–free flow splitting in capillary electrophoresis

In recent years, several dual detection concepts (DDCs) for CE were developed, which consisted of at least one nondestructive detector. For these DDCs, a linear detector arrangement could be used, which is not possible when both detectors are destructive. To overcome this problem, we developed a concept for the splitting of the CE stream utilizing commercially available flow splitters (FSs) that allow the parallel positioning of two destructive detectors. In this proof-of-concept study, T- and Y-shaped FSs were characterized regarding their suitability for DDCs. To keep it simple, a UV detector (UV) and a C⁴D were used for the characterization. The model system consisted of an acetonitrile-based background electrolyte and the two model substances, (ferrocenylmethyl)trimethylammonium iodide and caffeine. CE hyphenated to a UV detector (CE-UV) measurements revealed that the split ratio was about 50% for both FSs. CE-C⁴D was used to evaluate the peak shape in front of and behind the FSs. These measurements showed that there was no significant peak broadening introduced by the FSs. Additionally, there were no changes in the LODs in front of and behind the FSs. Furthermore, the flexibility of the new FS approach allowed the usage of capillaries with different ids (25–75 µm) for injection and detection.     

Nanohybrid Chemosensor for the Simultaneous Detection of Fluoride and Iodide in Aqueous System and Its Utility in Real Samples

A nanohybrid chemosensor for specific, selective and simultaneous recognition of iodide and fluoride was prepared through decoration of silver nanoparticles onto Schiff‐Base based organic nanoparticles. The developed chemosensor showed specific recognition ability for this analytes at low concentrations with detection limits at 690 nM for fluoride and 11 nM for iodide in two different regions of DPV profiles. Theoretical calculations based in Density Functional Theory were performed, which supports experimental results by demonstrating the binding selectivity of nanohybrids with I^? and F^?. The proposed sensor was also used for real sample analysis and results were verified using some standard literature method.     

Electrochemical Biosensors Based on Enzymatic Reactor of Silver Solid Amalgam Powder for Measurements in Flow Systems

An enzymatic reactor based on silver solid amalgam powder was suggested as the main part of biosensors in flow systems for the first time. Biosensors were tested with following enzymes: ascorbate oxidase, glucose oxidase, catalase, tyrosinase and laccase. The current response of each biosensor was optimized with respect to the detection potential, flow rate, the injection and reactor volume. Relative standard deviation for detection with the studied enzymes was found to be in the range of 0.81–2.1 %. The biosensor with the ascorbate oxidase reactor was used for determination of ascorbic acid in the vitamin tablets Celaskon.