Specific assay for homoserine and its lactone in Pisum sativum. Preparation of homoserine hydroxamic acid

The existence of homoserine lactone in Pisum sativum seedlings is demonstrated. L-Homoserine lactone reacts with hydroxylamine, at neutral or alkaline pH, to form homoserine hydroxamic acid. Procedures are described for preparing L-homoserine lactone and L-homoserine hydroxamic acid. The hydroxamic acid yields a color with maximum absorbance at 492 nm with Fe³⁺ in 0.25 N HCl. This reaction permitted assay for total homoserine and homoserine lactone. Six-day old Pisum sativum seedlings, with cotyledons removed, were extracted with 90% ethanol. Evaporation of the ethanol and addition of Na₂SO₄ solution and toluene and centrifugation removed protein lipids and esters. After clarification with activated charcoal, homoserine lactone content was estimated by reaction with NH₂OH and Fe³⁺ reagents. For total homoserine, protein precipitation was with 2 N HCl and toluene. Evaporation to dryness at 60 °C under vacuum converted all homoserine to the lactone. The values found for total homoserine (μmols/g, wet weight) and preformed lactone (%) with the various growth media used were as follows: nitrate 87.4 (14.7%), NH₂OH 75.2 (6.3%), water 70.5 (7.9%), urea 56.4 (18.9%). Acetic anhydride added to homoserine hydroxamic acid forms acetohydroxamic acid, which yields a color with maximum absorbance at 505 nm with Fe³⁺. This color reaction is seven times as sensitive as the reaction of Fe³⁺ with homoserine hydroxamic acid itself.     

Extreme Differences in the Interactions of `Bare' Fe+ and Fe2+ with Hydrogen Peroxide: Fenton Chemistry in the Gas Phase

The interaction of bare iron mono‐ and dications with hydrogen peroxide in the gas phase is studied by ab initio calculations employing the B3LYP/6‐311+G* level of theory. For the monocation, the quartet and sextet coordination complexes Fe(H₂O₂) are high‐energy isomers that easily interconvert to the more stable iron dihydroxide monocation Fe(OH) and hydrated iron oxide (H₂O)FeO⁺ (quartet) or dissociate into FeOH⁺+OH^. (sextet). On the dication surface, however, the order of stabilities is reversed in that Fe(H₂O₂)²⁺ (quintet) corresponds to the most stable doubly charged species, while the formal Fe^IV compounds Fe(OH) and (H₂O)FeO²⁺ are higher in energy.     

Reversible pH Switch of Two‐Quartet G‐Quadruplexes Formed by Human Telomere

A four‐repeat human telomere DNA sequence without the 3′‐end guanine, d[TAGGG(TTAGGG)₂TTAGG] (htel1‐ΔG23) has been found to adopt two distinct two G‐quartet antiparallel basket‐type G‐quadruplexes, TD and KDH⁺ in presence of KCl. NMR, CD, and UV spectroscopy have demonstrated that topology of KDH⁺ form is distinctive with unique protonated T18?A20⁺?G5 base triple and other capping structural elements that provide novel insight into structural polymorphism and heterogeneity of G‐quadruplexes in general. Specific stacking interactions amongst two G‐quartets flanking base triples and base pairs in TD and KDH⁺ forms are reflected in 10 K higher thermal stability of KDH⁺. Populations of TD and KDH⁺ forms are controlled by pH. The (de)protonation of A20 is the key for pH driven structural transformation of htel1‐ΔG23. Reversibility offers possibilities for its utilization as a conformational switch within different compartments of living cell enabling specific ligand and protein interactions.     

G‐Tetraplex‐Induced FRET within Telomeric Repeat Sequences Using PyA‐PerA as Energy Donor–Acceptor Pair

G‐tetraplex induced fluorescence resonance energy transfer (FRET) within telomeric repeat sequences has been studied using a nucleoside‐tethered FRET pair embedded in the human telomeric G‐quadruplex forming sequence (5′‐A GGG TT ^Py A GGG TT ^Per A GGG TTA GGG‐3′, Py=pyrene, Per=perylene). Conformational change from a single strand to an anti‐parallel G‐quadruplex leads to FRET from energy donor ( ^Py A ) to acceptor ( ^Per A ). The distance between the FRET donor/acceptor partners was controlled by changing the number of G‐quartet spacer units. The FRET efficiency decreases with increase in G‐quartet units. Overall findings indicate that this could be further used for the development of FRET‐based sensing and measurement techniques.     

Synthesis of poly(hydroxamic acid) ligand from polymer grafted corn‐cob cellulose for transition metals extraction

Poly(hydroxamic acid) ligand was synthesized using ester functionalities of cellulose‐graft‐poly(methyl acrylate) copolymer, and products are characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy analysis. The poly(hydroxamic acid) ligand was utilized for the sensing and removal of transition metal ions form aqueous solutions. The solution pH is found a key factor for the optical detection of metal ions, and the reflectance spectra of the [Cu‐ligand]ⁿ⁺ complex were observed to be the highest absorbance 99.5% at pH 6. With the increase of Cu²⁺ ion concentration, the reflectance spectra were increased, and a broad peak at 705 nm indicated that the charge transfer (π‐π transition) complex was formed. The adsorption capacity with copper was found to be superior, 320 mg g^?1, and adsorption capacities for other transition metal ions were also found to be good such as Fe³⁺, Mn²⁺, Co³⁺, Cr³⁺, Ni²⁺, and Zn²⁺ were 255, 260, 300, 280, 233, and 223 mg g^?1, respectively, at pH 6. The experimental data show that all metal ions fitted well with the pseudo‐second‐order rate equation. The sorption results of the transition metal ions onto ligand were well fitted with Langmuir isotherm model (R² > 0.98), which implies the homogenous and monolayer character of poly(hydroxamic acid) ligand surface. Eleven cycles sorption/desorption process were applied to verify the reusability of this adsorbent. The investigation of sorption and extraction efficiency in each cycle indicated that this new type of adsorbent can be recycled in many cycles with no significant loss in its original detection and removal capability. Copyright © 2016 John Wiley & Sons, Ltd.     

A S2O32−‐Enhanced Fluorogenic Chemosensor for Fe3+ in Aqueous Media Based on a Boron–Fluorine Derivative

A fluorescent “turn‐on” probe for Fe³⁺ was investigated in an aqueous system based on a boron 2‐(2′‐pyridyl) imidazole complex (BOPIM‐dma). BOPIM‐dma shows weak or no fluorescence in polar solvents due to twisted intramolecular charge transfer, but the addition of Fe³⁺ to BOPIM‐dma leads to fluorescence switch‐on responses. The binding is highly selective to Fe³⁺ over other metal ions, indicating that BOPIM‐dma is a chemodosimeter for Fe³⁺. Furthermore, the existence of S₂O₃²⁻ could much enhance and stabilize the emission significantly, indicating that the BOPIM‐dma/Fe³⁺/S₂O₃²⁻ complexes are a strong fluorescence system, and can be used as a sensitive detector for Fe³⁺, with the limit of detection of 6.0 × 10⁻⁷ mol L⁻¹.     

Selective Chemosensor of Fe3+ Based on Fluorescence Quenching by 2,2′‐Bisbenzimidazole Derivative in Aqueous Media

2,2′‐Bisbenzimidazole derivative ( L ) was designed as a fluorescent chemosensor for Fe³⁺. This structurally simple chemosensor displays significant fluorescence quenching with increasing concentrations of Fe³⁺. L exhibited high selectivity and antidisturbance for Fe³⁺ among environmentally relevant metal ions in aqueous media. The method of Job's plot indicated the formation of 1:2 complex between L and Fe³⁺, and the possible binding mode of the system was also proposed. In addition, further study demonstrates the detection limit on fluorescence response of the sensor to Fe³⁺ is down to 10^?7 mol·L^?1 range. The binding mode was investigated by fluorescence spectra, ESI‐MS, IR data, ¹H NMR, ¹³C NMR and crystal data.     

Modelling Photosynthesis with ZnII‐Protoporphyrin All‐DNA G‐Quadruplex/Aptamer Scaffolds

All‐DNA scaffolds act as templates for the organization of photosystem I model systems. A series of DNA templates composed of Zn^II‐protoporphyrin IX (Zn^IIPPIX)‐functionalized G‐quadruplex conjugated to the 3′‐ or 5′‐end of the tyrosinamide (TA) aptamer and Zn^IIPPIX/G‐quadruplex linked to the 3′‐ and 5′‐ends of the TA aptamer through a four‐thymidine bridge. Effective photoinduced electron transfer (ET) from Zn^IIPPIX/G‐quadruplex to bipyridinium‐functionalized tyrosinamide, TA‐MV²⁺, bound to the TA aptamer units is demonstrated. The effectiveness of the primary ET quenching of Zn^IIPPIX/G‐quadruplex by TA‐MV²⁺ controls the efficiency of the generation of TA‐MV^+.. The photosystem‐controlled formation of TA‐MV^+. by the different photosystems dictates the secondary activation of the ET cascade corresponding to the ferredoxin‐NADP⁺ reductase (FNR)‐catalysed reduction of NADP⁺ to NADPH by TA‐MV^+., and the sequestered alcohol dehydrogenase catalysed reduction of acetophenone to 1‐phenylethanol by NADPH.     

Anti-inflammatory catecholic chitosan hydrogel for rapid surgical trauma healing and subsequent prevention of tumor recurrence

Although occupying pillar position in clinical cancer treatments, surgery itself and surgical trauma would elicit series of local/systemic inflammation-related responses that resulted in high rate of tumor recurrence. Herein, chitosan with conjugated gallic acid (CSG) molecules were coordinated with Fe³⁺ to form CSG/Fe³⁺ hydrogel for filling the tumor-resected cavity with considerable wet-adhesion ability and anti-inflammatory performance. With the assistance of doxorubicin hydrochloride (DOX∙HCl), CSG/Fe³⁺/DOX hydrogel exhibited synergistic photothermal-chemo tumor-inhibited performance under near-infrared (NIR) light irradiation for eradicating residual and/or surgical trauma-recruited cancer cells. Thus, our study attempts to show a paradigm that realizes quick surgical trauma healing, inflammation inhibition and prevention of postsurgical tumor recurrence.     

Synthesis and magnetic properties of novel poly(Schiff base)‐Fe2+ complexes

Three polymer‐Fe²⁺ complexes were synthesized from Fe²⁺ and poly(Schiff base)s. The poly(Schiff base)s were prepared from 2,2′‐diamino‐4,4′‐bithiazole (DABT) with phthalaldehyde, 5,5′‐methylenebis(salicylaldehyde) (MBSA) and terephthalaldehyde, respectively, and characterized by IR, XPS, NMR and ESR spectroscopy. The magnetic behavior of these polymer‐Fe²⁺ complexes was examined as a function of magnetic field strength and temperature (5–300 K), respectively. The hysteresis loops were also studied. Based on these results, several novel ferromagnets were obtained.     

Developing a Self‐Healing Supramolecular Nucleoside Hydrogel Based on Guanosine and Isoguanosine

Recently, supramolecular hydrogels have attracted increasing interest owing to their tunable stability and inherent biocompatibility. However, only few studies have been reported in the literature on self‐healing supramolecular nucleoside hydrogels, compared to self‐healing polymer hydrogels. In this work, we successfully developed a self‐healing supramolecular nucleoside hydrogel obtained by simply mixing equimolar amounts of guanosine (G) and isoguanosine (isoG) in the presence of K⁺. The gelation properties have been studied systematically by comparing different alkali metal ions as well as mixtures with different ratios of G and isoG. To this end, rheological and phase diagram experiments demonstrated that the co‐gel not only possessed good self‐healing properties and short recovery time (only 20 seconds) but also could be formed at very low concentrations of K⁺. Furthermore, nuclear magnetic resonance (NMR), powder X‐ray diffraction (PXRD), and circular dichroism (CD) spectroscopy suggested that possible G₂isoG₂‐quartet structures occurred in this self‐healing supramolecular nucleoside hydrogel. This co‐gel, to some extent, addressed the problem of isoguanosine gels for the applications in vivo, which showed the potential to be a new type of drug delivery system for biomedical applications in the future.     

Flexible,high sensitive and radiation-resistant pressure-sensing hydrogel

Excellent radiation resistance is a prerequisite for pressure-sensitive hydrogels to be used in high-energy radiation environments. In this work, tannic acid-modified boron nitride nanosheet（BNNS-TA） is first prepared as the radiation-resistant additive by a facile one-step ball milling of hexagonal boron nitride and tannic acid. Then, polyacrylamide（PAAm）-based pressure-sensitive hydrogel doped with BNNS-TA and Fe³⁺ions is fabricated. The ternary BNNS-TA/Fe³⁺/PAAm hydrogel...     

An Fe2+‐ and α‐Ketoglutarate‐Dependent Halogenase Acts on Nucleotide Substrates

While halogenated nucleosides are used as common anticancer and antiviral drugs, naturally occurring halogenated nucleosides are rare. Adechlorin (ade) is a 2′‐chloro nucleoside natural product first identified from Actinomadura sp. ATCC 39365. However, the installation of chlorine in the ade biosynthetic pathway remains elusive. Reported herein is a Fe²⁺‐α‐ketoglutarate halogenase AdeV that can install a chlorine atom at the C2′ position of 2′‐deoxyadenosine monophosphate to afford 2′‐chloro‐2′‐deoxyadenosine monophosphate. Furthermore, 2′,3′‐dideoxyadenosine‐5′‐monophosphate and 2′‐deoxyinosine‐5′‐monophosphate can also be converted, albeit 20‐fold and 2‐fold, respectively, less efficiently relative to the conversion of 2′‐deoxyadenosine monophosphate. AdeV represents the first example of a Fe²⁺‐α‐ketoglutarate‐dependent halogenase that converts nucleotides into chlorinated analogues.     

Preparation of metal adsorbent from poly(methyl acrylate)-grafted-cassava starch via gamma irradiation

Metal adsorbent containing hydroxamic acid groups was successfully synthesized by radiation-induced graft copolymerization of methyl acrylate (MA) onto cassava starch. The optimum conditions for grafting were studied in terms of % degree of grafting (Dg). Conversion of the ester groups present in poly(methyl acrylate)-grafted-cassava starch copolymer into hydroxamic acid was carried out by treatment with hydroxylamine (HA) in the presence of alkaline solution. The maximum percentage conversion of the ester groups of the grafted copolymer, % Dg=191 (7.63 mmol/g of MA), into the hydroxamic groups was 70% (5.35 mmol/g of MA) at the optimum condition. The adsorbent of 191%Dg had total adsorption capacities of 2.6, 1.46, 1.36, 1.15 and 1.6 mmol/g-adsorbent for Cd²⁺, Al³⁺, UO₂²⁺, V⁵⁺ and Pb²⁺, respectively, in the batch mode adsorption.     

Silicotungstic acid modified Ce‐Fe‐Ox catalyst for selective catalytic reduction of NOx with NH3: Effect of the amount of HSiW

The HSiW(x)/Ce‐Fe catalysts were used to research the effect of silicotungstic acid contents on the catalytic activity in the selective catalytic reduction of NO_x with NH₃. Doping different contents of silicotungstic acid affected surface species and redox property as well as the catalytic activity. With the increasing amount of HSiW (x = 5%, 10% and 20%), the redox reaction between Fe³⁺/Fe²⁺ and Ce⁴⁺/Ce³⁺ enhanced, which could improve the ratio of Ce³⁺ and Fe³⁺. And then, more Ce³⁺ increased the ratio of chemisorbed oxygen (O_α). Besides, the type and strength of acid sites over HSiW(_x)/Ce‐Fe was affected by the HSiW contents. These factors facilitated the catalytic performance. Thus, the NO_x conversion of HSiW(x)/Ce‐Fe(x = 20%) was higher than 90%, which maintained in a wide temperature range between 200 and 400 °C.     

A novel regenerated silk fibroin-based hydrogels with magnetic and catalytic activities

A simple and facile synthetic methodology for fabricating the regenerated silk fibroin(RSF)-based hydrogel which consisted of the in situ generated magnetic ferriferous oxide(Fe_3O_4) was developed. Using the co-precipitation of Fe~(2+) and Fe~(3+) within the RSF-based hydrogel with 90% RSF and 10% HPMC(hydroxypropyl methyl cellulose), the as-prepared RSF/Fe_3O_4 hydrogel not only showed high strength of saturation magnetization, but also exhibited excellent catalytic activities. For example, with the assistant of 3,3′,5,5′-tetramethylbenzidine(TMB), the RSF/Fe_3O_4 hydrogel could detect H_2O_2 at a concentration as low as 1 × 10~(-6) mol·L~(-1). In addition, the catalytic activities were able to be maintained for a long term under various conditions. These findings suggest that the RSF-based materials can be endowed with interesting properties, and have great potential for the applications in the fields of biotechnology and environmental chemistry.     

A threefold interpenetrating two‐dimensional zinc(II) coordination polymer: synthesis,crystal structure and selective luminescence sensing properties

The Fe³⁺ ion is the most important element in environmental systems and plays a fundamental role in biological processes. Iron deficiency can result in diseases and highly selective and sensitive detection of trace Fe³⁺ has become a hot topic. A novel two‐dimensional Zn^II coordination framework, poly[[μ‐4,4′‐bis(2‐methylimidazol‐1‐yl)diphenyl ether‐κ²N³:N^3′](μ‐4,4′‐sulfonyldibenzoato‐κ²O:O′)zinc(II)], [Zn(C₁₄H₈O₆S)(C₂₀H₁₈N₄O)]_n or [Zn(SDBA)(BMIOPE)]_n, (I), where H₂SDBA is 4,4′‐sulfonyldibenzoic acid and BMIOPE is 4,4′‐bis(2‐methylimidazol‐1‐yl)diphenyl ether, has been prepared and characterized by IR, elemental analysis, thermal analysis and X‐ray diffraction analysis, the latter showing that the coordination polymer exhibits a threefold interpenetrating two‐dimensional 4⁴‐ sql network. In addition, it displays a highly selective and sensitive sensing for Fe³⁺ ions in aqueous solution.     

Preparation of W1/O/W2 emulsion to limit the diffusion of Fe3+ in the Fricke gel 3D dosimeter

The irradiation of tumors in radiotherapy requires accurate 3D dosimetry. The Fricke 3D dosimeters, which were considered to be high potential of application in 3D dosimetry, suffer from a reduced temporal integrity of dose distribution caused by Fe³⁺ ions diffusion. To overcome the drawback, we firstly synthesized a kind of amphiphilic molecules with critical micelle concentration of 0.45 g/L and hydrophile‐lipophile balance value of 10, then prepared multiple emulsions by self‐assembling those molecules in Fricke solution under liquid paraffin, and finally obtained Fricke hydrogel embedded with the multiple emulsions. The diffusion coefficient of Fe³⁺ ions in the embedded Fricke hydrogel was measured to be 0.17 mm²/h. The hydrogel dosimeter exhibits considerable potential for use in dose verification applications.     

Structural Selection in G‐Quartet‐Based Hydrogels and Controlled Release of Bioactive Molecules

A guanosine‐5′‐hydrazide can entrap biologically interesting molecules such as acyclovir, vitamin C, and vancomycin into its hydrogel network. Controlled release of these molecules was monitored by ¹H NMR spectroscopy. The hydrazide may potentially form mixed G–G quartets with analogous compounds containing a guanine group. ¹H NMR spectroscopy was used to study the inclusion of various guanine derivatives into the hydrogel. The structural selectivity was found to depend strongly on both the shape and the charge of the additive and may arise from the strong cohesion of the supramolecular architecture of the gel and the resulting resistance to perturbation by foreign bodies. Hydrogels thus offer a promising medium for highly selective, controlled release of bioactive substances.     

Synthesis,structure and selective luminescence sensing for iron(III) ions of a three‐dimensional zinc(II) (4,6)‐connected coordination network

Coordination polymers constructed from conjugated organic ligands and metal ions with a d¹⁰ electronic configuration exhibit intriguing properties for chemical sensing and photochemistry. A Zn^II‐based coordination polymer, namely poly[aqua(μ₆‐biphenyl‐3,3′,5,5′‐tetracarboxylato)(μ₂‐4,4′‐bipyridine)dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₀H₈N₂)(H₂O)₂]_n or [Zn₂(m,m‐bpta)(4,4′‐bipy)(H₂O)₂]_n, was synthesized from a mixture of biphenyl‐3,3′,5,5′‐tetracarboxylic acid [H₄(m,m‐bpta)], 4,4′‐bipyridine (4,4′‐bipy) and Zn(NO₃)₂·6H₂O under solvothermal conditions. The title complex has been structurally characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis, and features a μ₆‐coordination mode. The Zn^II ions adopt square‐pyramidal geometries and are bridged by two syn–syn carboxylate groups to form [Zn₂(COO)₂] secondary buildding units (SBUs). The SBUs are crosslinked by (m,m‐bpta)^4? ligands to produce a two‐dimensional grid‐like layer that exhibits a stair‐like structure along the a axis. Adjacent layers are linked by 4,4′‐bipy ligands to form a three‐dimensional network with a {4⁴.6¹⁰.8}{4⁴.6²} topology. In the solid state, the complex displays a strong photoluminescence and an excellent solvent stability. In addition, the luminescence sensing results indicate a highly selective and sensitive sensing for Fe³⁺ ions.