Self‐Stabilized Amorphous Organic Materials with Room‐Temperature Phosphorescence

The stability of pure organic room‐temperature phosphorescent (RTP) materials in air has been a research hotspot in recent years. Without crystallization or encapsulation, a new strategy was proposed to obtain self‐stabilized organic RTP materials, based on a complete ionization of a photo‐induced charge separation system. The ionization of aromatic phenol 4‐carbazolyl salicylaldehyde (CSA) formed a stable H‐bonding anion–cation radical structure and led to the completely amorphous CSA‐I film. Phosphorescent lifetimes as long as 0.14 s at room temperature and with direct exposure to air were observed. The emission intensity was also increased by 21.5‐fold. Such an amorphous RTP material reconciled the contradiction between phosphorescence stability and vapor permeability and has been successfully utilized for peroxide vapor detection.     

Elucidating the Excited State of Mechanoluminescence in Organic Luminogens with Room‐Temperature Phosphorescence

Two stable, purely organic luminogens exhibit both mechano‐ (ML) and photoluminescence (PL) with dual fluorescence–phosphorescence emissions at room temperature. Careful analysis of the crystal structures, coupled with theoretical calculations, demonstrate that room‐temperature phosphorescence and ML properties are strongly related to molecular packing. In particular, the formation and fracture of molecular dimers with intermolecular charge‐transfer properties has a significant effect on intersystem crossing, as well as excited triplet state emissions, in both PL and ML processes.     

Carbon Dots in a Matrix: Energy‐Transfer‐Enhanced Room‐Temperature Red Phosphorescence

High‐efficiency red room‐temperature phosphorescence (RTP) emissions have been achieved by embedding carbon dots (CDs) in crystalline Mn‐containing open‐framework matrices. The rationale of this strategy relies on two factors: 1) the carbon source, which affects the triplet energy levels of the resulting CDs and thus the spectral overlap and 2) the coordination geometry of the Mn atoms in the crystalline frameworks, which determines the crystal‐field splitting and thus the emission spectra. Embedding the carbon dots into a matrix with 6‐coordinate Mn centers resulted in a strong red RTP with a phosphorescence efficiency of up to 9.6 %, which is higher than that of most reported red RTP materials. The composite material has an ultrahigh optical stability in the presence of strong oxidants, various organic solvents, and strong ultraviolet radiation. A green‐yellow RTP composite was also prepared by using a matrix with 4‐coordinate Mn centers and different carbon precursors.     

AIEgen with Fluorescence–Phosphorescence Dual Mechanoluminescence at Room Temperature

We report the first example of an AIEgen (DPP‐BO) with fluorescence–phosphorescence dual emission under mechanical stimulation. By carefully analyzing the crystal structure of DPP‐BO, the efficient intermolecular and intramolecular interactions should account for its unique mechanoluminescence (ML) properties, especially the abnormal phosphorescence, as further confirmed by controlled experiments and theoretical calculations for the presence of ISC transitions. These results provide important information for understanding the complex ML process, possibly opening up a new way to study the inherent mechanism of ML by broadening the application of AIEgens.     

Organic Nanocrystals with Bright Red Persistent Room‐Temperature Phosphorescence for Biological Applications

Persistent room‐temperature phosphorescence (RTP) in pure organic materials has attracted great attention because of their unique optical properties. The design of organic materials with bright red persistent RTP remains challenging. Herein, we report a new design strategy for realizing high brightness and long lifetime of red‐emissive RTP molecules, which is based on introducing an alkoxy spacer between the hybrid units in the molecule. The spacer offers easy Br−H bond formation during crystallization, which also facilitates intermolecular electron coupling to favor persistent RTP. As the majority of RTP compounds have to be confined in a rigid environment to quench nonradiative relaxation pathways for bright phosphorescence emission, nanocrystallization is used to not only rigidify the molecules but also offer the desirable size and water‐dispersity for biomedical applications.     

Crystal‐State Photochromism and Dual‐Mode Mechanochromism of an Organic Molecule with Fluorescence,Room‐Temperature Phosphorescence,and Delayed Fluorescence

A D‐A‐D′ type pure organic molecule, named ODFRCZ, has unique triple‐emission character covering fluorescence, phosphorescence, and delayed fluorescence (DF). The phosphorescence of ODFRCZ has a rather long lifetime of about 350 ms at room temperature. One dimer of ODFRCZ with enhanced parallel molecular packing acts more effectively to prompt ISC processes, which further generates room‐temperature phosphorescence (RTP), owing to the larger transition dipole moment and closer energy level between S₁ and T_n. ODFRCZ is a rare example of an organic RTP molecule that shows dual‐stimuli responsiveness of dual‐mode mechanochromism (fluorescence red‐shift and RTP/DF on‐off switch) and reversible crystal‐state photochromism. This work may broaden the knowledge for stimuli‐responsive RTP organic molecules and lay the foundation for their wide‐scale applications.     

Molecular Engineering for Metal‐Free Amorphous Materials with Room‐Temperature Phosphorescence

Materials displaying room‐temperature phosphorescence (RTP) have been attracting wide attention in recent years due to their distinctive characteristics including long emissive lifetime and large Stokes shift, and their various applications. Most synthesized RTP materials are metal complexes that display enhanced intersystem crossing and crystallization is a common way to restrict nonradiative transition. Amorphous metal‐free RTP materials, which do not rely on expensive and toxic metals and can be prepared in a straightforward fashion, have become an important branch of the field. This Minireview summarizes recent progress in amorphous RTP materials according to the approaches used to immobilize phosphors: host–guest interactions, molecule doping, copolymers, and small‐molecule self‐assembly. Some existing challenges and insightful perspectives are given at the end of the Minireview, which should benefit the future design and development of amorphous metal‐free RTP materials.     

Amorphous Pure Organic Polymers for Heavy‐Atom‐Free Efficient Room‐Temperature Phosphorescence Emission

Pure organic, heavy‐atom‐free room‐temperature phosphorescence (RTP) materials have attracted much attention and have potential applications in photoelectric and biochemical material fields owing to their rich excited state properties. They offer long luminescent lifetime, diversified design, and facile preparation. However, recent achievements of efficient phosphorescence under ambient conditions mainly focus on ordered crystal lattices or embedding into rigid matrices, which require strict growth conditions and have poor reproducibility. Herein, we developed a concise approach to give RTP with a decent quantum yield and ultralong phosphorescence lifetime in the amorphous state by radical binary copolymerization of acrylamide and different phosphors with oxygen‐containing functional groups. The cross‐linked hydrogen‐bonding networks between the polymeric chains immobilize phosphors to suppress non‐radiative transitions and provide a microenvironment to shield quenchers.     

Two‐Coordinate Copper(I)/NHC Complexes: Dual Emission Properties and Ultralong Room‐Temperature Phosphorescence

As a kind of photoluminescent material, Cu^I complexes have many advantages such as adjustable emission, variable structures, and low cost, attracting attention in many fields. In this work, two novel two‐coordinate Cu^I‐N‐heterocyclic carbene complexes were synthesized, and they exhibit unique dual emission properties, fluorescence and phosphorescence. The crystal structure, packing mode, and photophysical properties under different conditions were systematically studied, proving the emissive mechanism to be the locally excited state of the carbazole group. Based on this mechanism, ultralong room‐temperature phosphorescence (RTP) with a lifetime of 140 ms is achieved by selective deuteration of the carbazole group. These results deepen the understanding of the luminescence mechanism and design strategy for two‐coordinate Cu^I complexes, and prove their potential in applications as ultralong RTP materials.     

Room‐Temperature Phosphorescence of Crystalline Metal‐Free Organoboron Complex

The photoluminescence (PL) properties of a metal‐free organoboron complex, bis(4‐iodobenzoyl)methanatoboron difluoride ( 1BF₂ ), were elucidated. At room temperature, 1BF₂ emits blue fluorescence (FL) in nBuCl upon photoexcitation. In contrast, crystals of 1BF₂ emit green PL comprised of FL and phosphorescence (PH). The room‐temperature PH of crystalline 1BF₂ is a consequence of 1) suppression of thermal deactivation of the S₁ and T₁ excited states and 2) enhancement of intersystem crossing (ISC) from the S₁ to T₂ or T₁. The results of X‐ray crystallographic and theoretical studies supported the proposal that the former (1) is a result of intermolecular interactions caused by π‐stacking in the rigid crystal packing structure of 1BF₂ . The latter (2) is an effect of not only the heavy‐atom effect of iodine, but also the continuous π‐stacking alignment of 1BF₂ molecules in crystals, which leads to a forbidden S₁→S₀ transition and a small energy gap between the S₁ and T₂ or T₁.     

Transient and Persistent Room‐Temperature Mechanoluminescence from a White‐Light‐Emitting AIEgen with Tricolor Emission Switching Triggered by Light

Persistent luminescence from purely organic materials is basically triggered by light and electricity, which largely confines its practical applications. A purely organic AIEgen exhibits not only persistent photoluminescence, but also transient and persistent room‐temperature mechanoluminescence. By simply turning on and off a UV lamp, tricolor emission switching between blue, white, and yellow was achieved. The data from single‐crystal structure analysis and theoretical calculation suggest that mechanism of the observed persistent mechanoluminescence (pML) is correlated with the strong spin–orbit coupling of the bromine atom, as well as the formation of H‐aggregates and restriction of intramolecular motions in noncentrosymmetric crystal structure. These results outline a fundamental principle for the development of new pML materials, providing an important step forward in expanding the application scope of persistent luminescence.     

Long Afterglow Room‐Temperature Phosphorescence from Nanopebbles: A Urea Pyrolysis Product

Materials having long afterglow are highly sought after for various applications such as light‐emitting diodes, security signs and bioimaging. Herein, we report a simple, low‐cost synthesis of a purely organic room‐temperature phosphorescent nanomaterial with a pebble‐like structure by heating urea, a biocompatible and easily available precursor, at 200 °C with a high phosphorescence lifetime of 1.0365 s and a visible afterglow for up to 10 s. This urea derived phosphorescent nanocomposite (UPNC) can be mixed with commercially available acrylic paint base and common gum, which can be readily used as a phosphorescent pigment.     

Aggregation‐Induced Emission with Long‐Lived Room‐Temperature Phosphorescence from Methylene‐Linked Organic Donor–Acceptor Structures

Aggregation‐caused quenching (ACQ), where excited‐state and/or ground‐state electronic structures are altered to exhibit an increased proclivity for non‐radiative decay for the aggregates, is largely responsible for the lack of fluorescence and phosphorescence in molecular solids in general. Here we show that ACQ could be effectively circumvented by constructing an aromatic system with a methylene‐linker, where the system exhibits typical aggregation‐induced emission (AIE) with long‐lived room‐temperature phosphorescence, since the tetrahedral structure in the solid state may significantly reduce strong intermolecular interactions contributing to ACQ.     

Long‐Lived Room‐Temperature Phosphorescence for Visual and Quantitative Detection of Oxygen

An unconventional organic molecule (TBBU) showing obvious long‐lived room temperature phosphorescence (RTP) is reported. X‐ray single crystal analysis demonstrates that TBBU molecules are packed in a unique fashion with side‐by‐side arranged intermolecular aromatic rings, which is entirely different from the RTP molecules reported to date. Theoretical calculations verify that the extraordinary intermolecular interaction between neighboring molecules plays an important role in RTP of TBBU crystals. More importantly, the polymer film doped with TBBU inherits its distinctive RTP property, which is highly sensitive to oxygen. The color of the doped film changes and its RTP lifetime drops abruptly through a dynamic collisional quenching mechanism with increasing oxygen fraction, enabling visual and quantitative detection of oxygen. Through analyzing the grayscale of the phosphorescence images, a facile method is developed for rapid, visual, and quantitative detection of oxygen in the air.     

9,9‐Dimethylxanthene Derivatives with Room‐Temperature Phosphorescence: Substituent Effects and Emissive Properties

Room‐temperature phosphorescence (RTP) emitters with ultralong lifetimes are emerging as attractive targets because of their potential applications in bioimaging, security, and other areas. But their development is limited by ambiguous mechanisms and poor understanding of the correlation of the molecular structure and RTP properties. Herein, different substituents on the 9,9‐dimethylxanthene core (XCO) result in compounds with RTP lifetimes ranging from 52 to 601 ms, which are tunable by intermolecular interactions and molecular configurations. XCO‐PiCl shows the most persistent RTP because of its reduced steric bulk and multiple sites of the 1‐chloro‐2‐methylpropan‐2‐yl (PiCl) moiety for forming intermolecular interactions in the aggregated state. The substituent effects reported provide an efficient molecular design of organic RTP materials and establishes relationships among molecular structures, intermolecular interactions, and RTP properties.     

Intermolecular Electronic Coupling of Organic Units for Efficient Persistent Room‐Temperature Phosphorescence

Although persistent room‐temperature phosphorescence (RTP) emission has been observed for a few pure crystalline organic molecules, there is no consistent mechanism and no universal design strategy for organic persistent RTP (pRTP) materials. A new mechanism for pRTP is presented, based on combining the advantages of different excited‐state configurations in coupled intermolecular units, which may be applicable to a wide range of organic molecules. By following this mechanism, we have developed a successful design strategy to obtain bright pRTP by utilizing a heavy halogen atom to further increase the intersystem crossing rate of the coupled units. RTP with a remarkably long lifetime of 0.28 s and a very high quantum efficiency of 5 % was thus obtained under ambient conditions. This strategy represents an important step in the understanding of organic pRTP emission.     

Organic Room‐Temperature Phosphorescence with Strong Circularly Polarized Luminescence Based on Paracyclophanes

Pure organic materials with intrinsic room‐temperature phosphorescence typically rely on heavy atoms or heteroatoms. Two different strategies towards constructing organic room‐temperature phosphorescence (RTP) species based upon the through‐space charge transfer (TSCT) unit of [2.2]paracyclophane (PCP) were demonstrated. Materials with bromine atoms, PCP‐BrCz and PPCP‐BrCz, exhibit RTP lifetime of around 100 ms. Modulating the PCP core with non‐halogen‐containing electron‐withdrawing units, PCP‐TNTCz and PCP‐PyCNCz, successfully elongate the RTP lifetime to 313.59 and 528.00 ms, respectively, the afterglow of which is visible for several seconds under ambient conditions. The PCP‐TNTCz and PCP‐PyCNCz enantiomers display excellent circular polarized luminescence with dissymmetry factors as high as ?1.2×10^?2 in toluene solutions, and decent RTP lifetime of around 300 ms for PCP‐TNTCz enantiomers in crystalline state.     

A Rapidly Self‐Healing Supramolecular Polymer Hydrogel with Photostimulated Room‐Temperature Phosphorescence Responsiveness

Development of self‐healing and photostimulated luminescent supramolecular polymeric materials is important for artificial soft materials. A supramolecular polymeric hydrogel is reported based on the host–guest recognition between a β‐cyclodextrin (β‐CD) host polymer (poly‐β‐CD) and an α‐bromonaphthalene (α‐BrNp) polymer (poly‐BrNp) without any additional gelator, which can self‐heal within only about one minute under ambient atmosphere without any additive. This supramolecular polymer system can be excited to engender room‐temperature phosphorescence (RTP) signals based on the fact that the inclusion of β‐CD macrocycle with α‐BrNp moiety is able to induce RTP emission (CD‐RTP). The RTP signal can be adjusted reversibly by competitive complexation of β‐CD with azobenzene moiety under specific irradiation by introducing another azobenzene guest polymer (poly‐Azo).