Staged Surface Patterning and Self‐Assembly of Nanoparticles Functionalized with End‐Grafted Block Copolymer Ligands

Using two orthogonal external stimuli, programmable staged surface patterning and self‐assembly of inorganic nanoparticles (NPs) was achieved. For gold NPs capped with end‐grafted poly(styrene‐block‐(4‐vinylbenzoic acid)), P(St‐block‐4VBA), block copolymer ligands, surface‐pinned micelles (patches) formed from NP‐adjacent PSt blocks under reduced solvency conditions (Stimulus 1); solvated NP‐remote P(4VBA) blocks stabilized the NPs against aggregation. Subsequent self‐assembly of patchy NPs was triggered by crosslinking the P(4VBA) blocks with copper(II) ions (Stimulus 2). Block copolymer ligand design has a strong effect on NP self‐assembly. Small, well‐defined clusters assembled from NPs functionalized with ligands with a short P(4VBA) block, while NPs tethered with ligands with a long P(4VBA) block formed large irregularly shaped assemblies. This approach is promising for high‐yield fabrication of colloidal molecules and their assemblies with structural and functional complexity.     

Dual‐Mode Controlled Self‐Assembly of TiO2 Nanoparticles Through a Cucurbit[8]uril‐Enhanced Radical Cation Dimerization Interaction

The realization of controllable multicomponent self‐assembly through reversible supramolecular interactions is a challenging goal, and is an important strategy for the fabrication of switchable nanomaterials. Herein we show that the self‐assembly of TiO₂ nanoparticles (NP) functionalized with methyl viologen can be controlled both by light irradiation and chemical reduction through cucurbit[8]uril‐enhanced radical cation dimerization interactions. Moreover, the controlled assembly and disassembly of this system are accompanied by switchable photocatalytic activity of the TiO₂ NPs, which shows potential application as a novel smart and recyclable photocatalyst.     

Reciprocal Self‐Assembly of Peptide–DNA Conjugates into a Programmable Sub‐10‐nm Supramolecular Deoxyribonucleoprotein

To overcome the limitations of molecular assemblies, the development of novel supramolecular building blocks and self‐assembly modes is essential to create more sophisticated, complex, and controllable aggregates. The self‐assembly of peptide–DNA conjugates (PDCs), in which two orthogonal self‐assembly modes, that is, β‐sheet formation and Watson–Crick base pairing, are covalently combined in one supramolecular system, is reported. Despite extensive research, most self‐assembly studies have focused on using only one type of building block, which restricts structural and functional diversity compared to multicomponent systems. Multicomponent systems, however, suffer from poor control of self‐assembly behaviors. Covalently conjugated PDC building blocks are shown to assemble into well‐defined and controllable nanostructures. This controllability likely results from the decrease in entropy associated with the restriction of the molecular degrees of freedom by the covalent constraints. Using this strategy, the possibility to thermodynamically program nano‐assemblies to exert gene regulation activity with low cytotoxicity is demonstrated.     

Self‐Assembly of Amphiphilic Block Copolymer‐Tethered Nanoparticles: a New Approach to Nanoscale Design of Functional Materials

Colloidal molecules constructed from polymers and nanoparticles (NPs) have recently emerged as a novel class of building blocks for assembling functional hybrid materials. Particularly, self‐assembly of amphiphilic block copolymer (BCP)‐tethered NPs (BNPs) has shown great promise in the nanoscale design of functional hybrid materials. On the one hand, structurally the BNPs can be considered as molecular equivalents that are capable of self‐assembly at multiple hierarchical levels. On the other hand, the assembly of BNPs shows significant differences from molecular assembly due to their large dimension, complex geometry, and multi‐scale interactions involved in the assembly process. The manipulation of BCPs localized near the surface of the NPs offers an effective tool for engineering the interactions between NPs and hence the complexity of NP assembly. In this Feature Article, recent progresses on the self‐assembly of BNPs into functional materials are summarized. First, major strategies for assembling amphiphilic BNPs are highlighted. Secondly, the application of hybrid nanostructures (e.g., vesicles) assembled from BNPs in the field of biomedical imaging and delivery is discussed. Finally, current challenges and perspectives at this frontier are outlined.

     

Amine‐Reactive PEGylated Nanoparticles for Potential Bioconjugation

Water‐dispersible PEGylated nanoparticles (NPs) presenting amine‐reactive conjugation sites at their surfaces were synthesized and their ability to react with amines was demonstrated. An amphiphilic block copolymer bearing an N‐succinimidyl ester at its water‐soluble end was synthesized by the consecutive controlled radical polymerization of poly(ethylene glycol) methacrylate and styrene from a functional halide initiator. After purification of the copolymer, NPs of approximately 40 nm were obtained by a self‐assembly process in water. The reactivity of the NPs was evidenced by reacting them with primary amines, including a fluorescent dye. The activated ester remained stable throughout all synthetic steps and a nearly quantitative coupling efficiency was obtained.

     

Viologen‐Templated Arrays of Cucurbit[7]uril‐Modified Iron‐Oxide Nanoparticles

Magnetic and fluorescent assemblies of iron‐oxide nanoparticles (NPs) were constructed by threading a viologen‐based ditopic ligand, DPV²⁺, into the cavity of cucurbituril (CB[7]) macrocycles adsorbed on the surface of the NPs. Evidence for the formation of 1:2 inclusion complexes that involve DPV²⁺ and two CB[7] macrocycles was first obtained in solution by ¹H NMR and emission spectroscopy. DPV²⁺ was found to induce self‐assembly of nanoparticle arrays (DPV²⁺?CB[7]NPs) by bridging CB[7] molecules on different NPs. The resulting viologen‐crosslinked iron‐oxide nanoparticles exhibited increased saturation magnetization and emission properties. This facile supramolecular approach to NP self‐assembly provides a platform for the synthesis of smart and innovative materials that can achieve a high degree of functionality and complexity and that are needed for a wide range of applications.     

Anisotropic Self‐Assembly of Citrate‐Coated Gold Nanoparticles on Fluidic Liposomes

The behavior of self‐assembly processes of nanoscale particles on plasma membranes can reveal mechanisms of important biofunctions and/or intractable diseases. Self‐assembly of citrate‐coated gold nanoparticles (cAuNPs) on liposomes was investigated. The adsorbed cAuNPs were initially fixed on the liposome surfaces and did not self‐assemble below the phospholipid phase transition temperature (T_m). In contrast, anisotropic cAuNP self‐assembly was observed upon heating of the composite above the T_m, where the phospholipids became fluid. The number of self‐assembled NPs is conveniently controlled by the initial mixing ratio of cAuNPs and liposomes. Gold nanoparticle protecting agents strongly affected the self‐assembly process on the fluidic membrane.     

Arrangement of C60 via the Self‐Assembly of Post‐Functionalizable Polyisocyanate Block Copolymer

Poly(furfuryl isocyanate) (PFIC), which includes the reactive furan group, was synthesized by anionic polymerization using a sodium benzhydroxide (Na‐BH), self‐assembly initiator. We determined the optimum polymerization conditions by varying both the reaction time and the molar ratio of the monomer to the initiator. Block copolymer, poly(furfuryl isocyanate)‐b‐poly(n‐hexyl isocyanate), was synthesized under optimized polymerization conditions. The PFIC was modified by Diels–Alder reactions with C60 for functionalization. Transmission electron microscopy (TEM) was used to study the self‐assembly of block copolymers and modified block copolymer with C60. C60 formed highly ordered aggregates on the PFIC domains via self‐assembly of the block copolymer.     

Hamilton Receptor‐Mediated Self‐Assembly of Orthogonally Functionalized Au and TiO2 Nanoparticles

A new prototype of reversible self‐assembly between functionalized gold and titanium dioxide nanoparticles (NPs) utilizing hydrogen bonding interactions was developed and established. The gold nanoparticles were functionalized with a Hamilton‐receptor functionality bearing a thiol moiety as anchoring group. The titanium dioxide nanoparticles were modified with cyanurate derivatives which contained phosphonic acids as anchoring groups. The host–guest type interaction between two functionalized nanoparticles yielded a highly integrated nanoparticle system in chloroform. Moreover, by presenting a competing ligand in an exchange reaction, the product of self‐assembly can be segregated into the individual soluble components of functionalized nanoparticles. The self‐assembly and the exchange reaction were followed and monitored in detail by UV/Vis spectroscopy. The structure of the self‐assembly product was investigated using scanning electron microscopy (SEM) and small‐angle X‐ray scattering (SAXS).     

Synthesis and self‐assembly of novel amphiphilic copolymers poly(lactic acid)‐block‐poly(ascorbyl acrylate)

In this study, a novel type of amphiphilic block copolymers poly(lactic acid)‐block‐poly(ascorbyl acrylate) (PLA‐block‐PAAA) with biodegradable poly(lactic acid) as hydrophobic block and poly(ascorbyl acrylate) (PAAA) as hydrophilic block was successfully developed by a combination of ring‐opening polymerization and atom transfer radical polymerization, followed by hydrogenation under normal pressure. The chemical structures of the desired copolymers were characterized by ¹H NMR and gel permeation chromatography. The thermal physical properties and crystallinity were investigated by thermogravimetric analysis, differential scanning calorimetry, and wide angle X‐ray diffraction, respectively. Their self‐assembly behavior was monitored by fluorescence‐probe technique and turbidity change using UV–vis spectrometer, and the morphology and size of the nanocarriers via self‐assembly were detected by cryo‐transmission electron microscopy and dynamic light scattering. These polymeric micelles with PAAA shell extending into the aqueous solution have potential abilities to act as promising nanovehicles for targeting drug delivery. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A doubly responsive AB diblock copolymer: RAFT synthesis and aqueous solution properties of poly (N‐isopropylacrylamide‐block‐4‐vinylbenzoic acid)

We describe herein the synthesis and self‐assembly characteristics of a doubly responsive AB diblock copolymer comprised of N‐isopropylacrylamide (NIPAM) and 4‐vinylbenzoic acid (VBZ). The AB diblock copolymer was prepared via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization in DMF employing a trithiocarbonate‐based RAFT agent. PolyNIPAM was employed as the macroRAFT agent. The NIPAM homopolymerization was shown to possess all the characteristics of a controlled process, and the blocking with VBZ was judged, by size exclusion chromatography, to be essentially quantitative. The NIPAM‐VBZ block copolymer was subsequently demonstrated to be able to form normal and inverse micelles in the same aqueous solution by taking advantage of the stimuli responsive characteristics of both building blocks. Specifically, and as judged by NMR spectroscopy and dynamic light scattering, raising the temperature to 40 °C (above the lower critical solution temperature of the NIPAM block), while at pH 12 results in supramolecular self‐assembly to yield nanosized species that are composed of a hydrophobic NIPAM core stabilized by a hydrophilic VBZ corona. Conversely, lowering the solution pH to 2.0 at ambient temperature results in the formation of aggregates in which the VBZ block is now hydrophobic and in the core, stabilized by the hydrophilic NIPAM block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5864–5871, 2007     

Ligand‐Assisted Co‐Assembly Approach toward Mesoporous Hybrid Catalysts of Transition‐Metal Oxides and Noble Metals: Photochemical Water Splitting

A bottom‐up synthetic approach was developed for the preparation of mesoporous transition‐metal‐oxide/noble‐metal hybrid catalysts through ligand‐assisted co‐assembly of amphiphilic block‐copolymer micelles and polymer‐tethered noble‐metal nanoparticles (NPs). The synthetic approach offers a general and straightforward method to precisely tune the sizes and loadings of noble‐metal NPs in metal oxides. This system thus provides a solid platform to clearly understand the role of noble‐metal NPs in photochemical water splitting. The presence of trace amounts of metal NPs (≈0.1 wt %) can enhance the photocatalytic activity for water splitting up to a factor of four. The findings can conceivably be applied to other semiconductors/noble‐metal catalysts, which may stand out as a new methodology to build highly efficient solar energy conversion systems.     

Controlled Assembly of Block Copolymer Coated Nanoparticles in 2D Arrays

The defined assembly of nanoparticles (NPs) in polymer matrices is an important prerequisite for next‐generation functional materials. A promising approach to control NP positions in polymer matrices at the nanometer scale is the use of block copolymers. It allows the selective deposition of NPs in nanodomains, but the final defined and ordered positioning of the NPs within the domains has not been possible. This can now be achieved by coating NPs with block copolymers. The self‐assembly of block copolymer‐coated NPs directly leads to ordered microdomains containing ordered NP arrays with exactly one NP per unit cell. By variation of the grafting density, the inter‐nanoparticle distance can be controlled from direct NP surface contact to surface separations of several nanometers, determined by the thickness of the polymer shell. The method can be applied to a wide variety of block copolymers and NPs and is thus suitable for a broad range of applications.     

Self‐assembly of block copolymers with an alkoxysilane‐based core‐forming block: A comparison of synthetic approaches

Polymerization‐induced self‐assembly (PISA) has become the preferred method of preparing self‐assembled nano‐objects based on amphiphilic block copolymers. The PISA methodology has also been extended to the realization of colloidal nanocomposites, such as polymer–silica hybrid particles. In this work, we compare two methods to prepare nanoparticles based on self‐assembly of block copolymers bearing a core‐forming block with a reactive alkoxysilane moiety (3‐(trimethoxysilyl)propyl methacrylate, MPS), namely (i) RAFT emulsion polymerization using a hydrophilic macroRAFT agent and (ii) solution‐phase self‐assembly upon slow addition of a selective solvent. Emulsion polymerization under both ab initio and seeded conditions were studied, as well the use of different initiating systems. Effective and reproducible chain extension (and hence PISA) of MPS via thermally initiated RAFT emulsion polymerization was compromised due to the hydrolysis and polycondensation of MPS occurring under the reaction conditions employed. A more successful approach to block copolymer self‐assembly was achieved via polymerization in a good solvent for both blocks (1,4‐dioxane) followed by the slow addition of water, yielding spherical nanoparticles that increased in size as the length of the solvophobic block was increased. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 420–429     

Nanoparticle arrangements in block copolymer particles with microphase‐separated structures

In this study, metal‐polymer particles with microphase‐separated structures were prepared by self‐organized precipitation, where a good solvent is evaporated from a solution that also contains block copolymer, Au NPs, and a poor solvent. Control of the microphase‐separated structure in composite particles consisting of Au NPs and block copolymer was accomplished by changing the Au NP size, the mix ratio, and the copolymerization ratio of the block copolymer. The morphology of the inner structures was changed from a lamellar phase to a spherical phase by increasing the Au NP concentration. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis,self‐assembly,and thermosensitivity of amphiphilic POEGMA‐PDMS‐POEGMA triblock copolymers

In this article, the synthesis and self‐assembly of a novel well‐defined biocompatible amphiphilic POEGMA‐PDMS‐POEGMA triblock copolymer were studied. The copolymer was synthesized by atom transfer radical polymerization of oligo(ethylene glycol) methyl ether methacrylate (OEGMA) using α,ω‐dibromo polydimethylsiloxane macroinitiator (Br‐PDMS‐Br). Br‐PDMS‐Br was synthesized through the esterification of α,ω‐hydroxypropyl polydimethylsiloxane and 2‐bromoisobutyryl bromide. The structures of the copolymers were confirmed by proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The copolymers showed reversible aggregation in response to temperature cycles with a lower critical solution temperature (LCST) between 61 and 66 °C, as determined by ultraviolet‐visible spectrophotometry and dynamic light scattering. The LCST values increased in proportion to the length of the hydrophilic block and were lower than that of the POEGMA homopolymer. The self‐assembly behavior of the copolymers in aqueous solution was investigated by fluorescence spectroscopy and transmission electron microscopy. The critical micelle concentration value (1.08–0.26 10^?6 mol L^?1) decreased as the length of the POEGMA chain increased. The POEGMA‐PDMS‐POEGMA copolymers can easily self‐assemble into spherical micelles in aqueous solution. Such biocompatible block copolymers may be attractive candidates as ‘‘smart'' thermo‐responsive drug delivery systems. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2684‐2691     

Synthesis,self‐assembly and recognition properties of biomimetic star‐shaped poly(ε‐caprolactone)‐b‐glycopolymer block copolymers

Biomimetic star‐shaped poly(ε‐caprolactone)‐b‐poly(gluconamidoethyl methacrylate) block copolymers (SPCL‐PGAMA) were synthesized from the atom transfer radical polymerization (ATRP) of unprotected GAMA glycomonomer using a tetra(2‐bromo‐2‐methylpropionyl)‐terminated star‐shaped poly(ε‐caprolactone) (SPCL‐Br) as a macroinitiator in NMP solution at room temperature. The block length of PGAMA glycopolymer within as‐synthesized SPCL‐PGAMA copolymers could be adjusted linearly by controlling the molar ratio of GAMA glycomonomer to SPCL‐Br macroinitiator, and the molecular weight distribution was reasonably narrow. The degree of crystallization of PCL block within copolymers decreased with the increasing block length ratio of outer PGAMA to inner PCL. Moreover, the self‐assembly properties of the SPCL‐PGAMA copolymers were investigated by NMR, UV‐vis, DLS, and TEM, respectively. The self‐assembled glucose‐installed aggregates changed from spherical micelles to worm‐like aggregates, then to vesicles with the decreasing weight fraction of hydrophilic PGAMA block. Furthermore, the biomolecular binding of SPCL‐PGAMA with Concanavalin A (Con A) was studied by means of UV‐vis, fluorescence spectroscopy, and DLS, which demonstrated that these SPCL‐PGAMA copolymers had specific recognition with Con A. Consequently, this will not only provide biomimetic star‐shaped SPCL‐PGAMA block copolymers for targeted drug delivery, but also improve the compatibility and drug release properties of PCL‐based biomaterials for hydrophilic peptide drugs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 817–829, 2008     

Oligonucleotide loaded polypeptide‐peptide nanoparticles towards mitochondrial‐targeted delivery

Nanoparticles (NPs) consisting of biodegradable and biocompatible polymers may have the ability to deliver a cargo to specific tissue, cell type, and organelle. Various diseases, which are linked to mitochondrial genome (mtDNA) mutations and have no effective treatments, may be approached by gene therapy strategies. In this study, we adapted the recently developed mitochondria delivering polypeptide‐peptide nanoparticles (PoP‐NPs) system to carry an oligonucleotide cargo to the proximity of the mitochondria. PoP‐NPs are formulated by self‐assembly of the negatively charged polypeptide, poly gamma glutamic acid (γ‐PGA), with an amphiphilic and cationic β‐sheet peptide (PFK). Here, we show that PFK interacts favorably with oligonucleotides and thereby enables the formation of DNA‐loaded PoP‐NPs (DNA‐PoP‐NPs). DNA‐PoP‐NPs could be assembled with different peptide to oligonucleotide (N/P) ratios, and their targeting to the proximity of mitochondria in cell culture could be facilitated through NPs coating with PFK peptide.     

Non‐Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three‐dimensional curved surfaces is achieved with a strategy that combines template‐induced hydrodynamic printing and self‐assembly of nanoparticles (NPs). Non‐lithography flexible wall‐shaped templates are replicated with microscale features by dicing a trench‐shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self‐assemble into close‐packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non‐interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single‐NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.     

Redox‐responsive Fluorescent Nanoparticles Based on Diselenide‐containing AIEgens for Cell Imaging and Selective Cancer Therapy

A fluorescent, diselenide‐containing 9,10‐distyrylanthracene (DSA) derivative (SeDSA) with aggregation‐induced emission (AIE) characteristic was successfully synthesized and SeDSA nanoparticles (NPs) were prepared through a nanoprecipitation method. SeDSA could coassemble with an antitumor prodrug, diselenide‐containing paclitaxel (SePTX), which could be obtained by precipitation, to form SeDSA‐SePTX Co‐NPs (Co‐NPs). Molecular dynamics (MD) simulations reveal that the driving forces for the self‐assembly behaviors of SeDSA NPs and SePTX NPs are π–π interactions and hydrophobic interactions, respectively, while the driving forces for Co‐NPs include hydrophobic interactions between SeDSA and SePTX, π–π interactions between SeDSA molecules and hydrophobic interactions between SePTX molecules. Meanwhile, Se‐Se bonds play a crucial role in balancing the intramolecular forces. These diselenide‐containing nanoparticles (SeDSA NPs, SePTX NPs and Co‐NPs) exhibit a high stability under physiological conditions and excellent reduction‐sensitivity in the presence of the redox agent glutathione (GSH) because of the selenium‐sulfur exchange reaction between diselenide and GSH. Both SeDSA NPs and Co‐NPs show strong orange fluorescence emissions on the account of the AIE feature of SeDSA and they were easily internalized by HeLa and HepG2 cells. Distinctively, the Co‐NPs combine the advantage of SeDSA and SePTX for cell imaging and antineoplastic activity, and exhibit selectivity of cytotoxicities between neoplasia cells and normal cells. This study highlights the development of diselenide‐containing AIEgens as a unique approach to prepare uniform and stable fluorescent nanoparticles for the application in cell imaging and tumor treatment.