Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Non‐Enzymatic Oxidation of a Pentagalloylglucose Analogue into Members of the Ellagitannin Family

The occurrence of more than 1000 structurally diverse ellagitannins has been hypothesized to begin with the oxidation of penta‐O ‐galloyl‐β‐d ‐glucose (β‐PGG) for the coupling of the galloyl groups. However, the non‐enzymatic behavior of β‐PGG in the oxidation is unknown. Disclosed herein is which galloyl groups tended to couple and which axial chirality was predominant in the derived hexahydroxydiphenoyl groups when an analogue of β‐PGG was subjected to oxidation. The galloyl groups coupled in the following order: at the 4,6‐, 1,6‐, 1,2‐, 2,3‐, and 3,6‐positions with respective S ‐, S ‐, R ‐, S ‐, and R ‐axial chirality. Among them, the most preferred 4,6‐coupling reflected the what was observed for natural ellagitannins. A new finding was that the second best coupling occured at the 1,6‐positions. With the detection of a 3,6‐coupled product, this work demonstrated that even ellagitannin skeletons with an axial‐rich glucose core may be generated non‐enzymatically.     

Redox Behaviour of Cymantrene Fischer Carbene Complexes in Designing Organometallic Multi‐tags

A series of Group 7 Fischer carbene complexes, [Cp(CO)₂Mn^I=C(OEt)Ar] (Cp=cyclopentadienyl, Ar=Th=thienyl ( 1 a ), Ar=Fu=furyl ( 2 a ), Ar=Fc=ferrocenyl ( 3 a )) and biscarbene complexes, [Cp(CO)₂Mn?C(OEt)?Ar′?(OEt)C?Mn(CO)₂Cp] (Ar′=Th′=2,5‐thienylene ( 1 b ), Ar′=Fu′=2,5‐furylene ( 2 b ), Ar′=Fc′=1,1′‐ferrocendiyl ( 3 b )) was synthesized and characterized. Chemical oxidation of [Cp(CO)₂Mn?C(OEt)Fc] ( 3 a ) and isolation of the oxidised species [3 a][PF₆] possessing a Mn^II centre proved possible below ?30 °C in dichloromethane solution. The ESR spectrum of the transiently stable radical cation, [3 a][PF₆] , confirmed the presence of a low‐spin Mn^II centre characterized by a rhombic g tensor (g_x=1.975, g_y=2.007 and g_z=2.130) in frozen dichloromethane at 77 K with ⁵⁵ Mn hyperfine coupling constants A₁, A₂ and A₃ of 115, 33 and 43 G, respectively. Electrochemical studies demonstrated the influence of the Ar substituent on the oxidation potential. All complexes showed that the redox potentials of carbene double bond reduction and Mn^I oxidation were dependent on the type of Ar group, but only 3 b showed resolved oxidations for the two Mn^I centres. Surprisingly, Mn^I oxidation occurs at lower potentials than ferrocenyl oxidation. Density functional theory (DFT) calculations were carried out to delineate the nature of the species involved in the oxidation and reduction processes and clearly confirm that oxidation of Mn^I is favoured over that of ferrocene.     

Novel Reactions for the Simple and Sensitive Spectrophotometric Determination of Traces of Selenium in Environmental Samples

Two rapid, highly sensitive, and selective spectrophotometric methods for the determination of traces of selenium(IV) were studied. The methods are based on either the oxidation of 4‐aminoantipyrine (=4‐amino‐1,2‐dihydro‐1,5‐dimethyl‐2‐phenyl‐3H‐pyrazol‐3‐one; 4‐AAP; 1 ) by selenium in basic medium and coupling with N‐(naphthalen‐1‐yl)ethane‐1,2‐diamine dihydrochloride (NEDA; 2 ?2 HCl) to give a violet derivative 3 or on the oxidation of dopamine hydrochloride (=4‐(2‐aminoethyl)benzene‐1,2‐diol hydrochloride; DPH; 4 ?HCl) by selenium in H₂SO₄ medium and coupling with 1 to yield a red derivative 5 (see Scheme). The violet derivative 3 with λ_max 563 nm is stable for 8 days and the red derivative 5 with λ _max 495 nm for more than a week. Beer's law is obeyed for selenium in the concentration range 0.03–3.5 μg ml^?1 (violet derivative 3 ) and 0.07–2.5 μg ml^?1 (red derivative 5 ), respectively. The optimum reaction conditions and other important analytical parameters were established. Interference due to various non‐target ions were also investigated. The proposed methods, were applied to the analysis of selenium in polluted water, natural water, plant material, soil samples and synthetic mixtures. The results of the analyses were superior in precision to those obtained by reported methods.     

Experimental and Computational Studies of a Multi‐Electron Donor–Acceptor Ligand Containing the Thiazolo[5,4‐d]thiazole Core and its Incorporation into a Metal–Organic Framework

A ligand containing the thiazolo[5,4‐d]thiazole (TzTz) core (acceptor) with terminal triarylamine moieties (donors), N,N′‐(thiazolo[5,4‐d]thiazole‐2,5‐diylbis(4,1‐phenylene))bis(N‐(pyridine‐4‐yl)pyridin‐4‐amine ( 1 ), was designed as a donor–acceptor system for incorporation into electronically active metal–organic frameworks (MOFs). The capacity for the ligand to undergo multiple sequential oxidation and reduction processes was examined using UV/Vis‐near‐infrared spectroelectrochemistry (UV/Vis‐NIR SEC) in combination with DFT calculations. The delocalized nature of the highest occupied molecular orbital (HOMO) was found to inhibit charge‐transfer interactions between the terminal triarylamine moieties upon oxidation, whereas radical species localized on the TzTz core were formed upon reduction. Conversion of 1 to diamagnetic 2+ and 4+ species resulted in marked changes in the emission spectra. Incorporation of this highly delocalized multi‐electron donor–acceptor ligand into a new two‐dimensional MOF, [Zn(NO₃)₂( 1 )] ( 2 ), resulted in an inhibition of the oxidation processes, but retention of the reduction capability of 1 . Changes in the electrochemistry of 1 upon integration into 2 are broadly consistent with the geometric and electronic constraints enforced by ligation.     

RuII Multinuclear Metallosupramolecular Rack‐Type Architectures of Polytopic Hydrazone‐Based Ligands: Synthesis,Structural Features,Absorption Spectra,Redox Behavior,and Near‐Infrared Luminescence

A novel class of polytopic hydrazone‐based ligands was synthesized. They gave heteroleptic Ru^II polynuclear rack‐like complexes of formula [Ru_nterpy_n(bridging molecular strand)]²ⁿ⁺ (terpy=2,2′:6′,2′′‐terpyridine). The new rack‐like systems can be viewed as being made of two identical or roughly identical peripheral subunits separated by several similar metal‐containing spacer subunits. The presence of pyrazine or pyrimidine units within the molecular multitopic strands introduces additional chemical diversity: whereas a pyrimidine unit leads to appended orthogonal subunits that are on the same side with regard to the main molecular strand, a pyrazine unit leads to orthogonal subunits that lie on different sides. Mixing pyrazine and pyrimidine units within the same (bridging) molecular strand also allows peculiar and topographically controlled geometries to be obtained. Redox studies provided evidence that each species undergoes reversible redox processes at mild potentials, which can be assigned to specific subunits of the multicomponent arrays. Non‐negligible electronic coupling takes place among the various subunits, and some electron delocalization extending over the overall bridging molecular strand takes place. In particular, oxidation data suggest that the systems can behave as p‐type “molecular wires” and reduction data indicate that n‐type electron conduction can occur within the multimetallic framework. All the multinuclear racks exhibit ³MLCT emission, both at 77 K in rigid matrix and at 298 K in fluid solution, which takes place in the near‐infrared region (emission maxima in the 1000–1100 nm region), and is quite structured. Rigidity of the molecular structures and delocalization within the large bridging ligands are proposed to contribute to the occurrence of the rather uncommon MLCT infrared emission, which is potentially interesting for optical communication devices.     

Tuning the optical properties of ethynylene triptycene‐based copolymers via oxidation of their alkyne groups into α‐diketones

The synthesis of ethynylene triptycene‐based copolymers with various aromatic spacers ( 3a–d ) is reported using the palladium‐catalyzed Sonogashira cross‐coupling reaction. The alkyne groups of 3a–d were oxidized into their respective α‐diketone copolymers 4a–d . Formation of 3,4a–d was confirmed by several characterization techniques, such as, gel permeation chromatography (GPC), ¹H and ¹³C nuclear magnetic resonance (NMR), FT‐infrared (FTIR), UV–vis absorption, and emission spectroscopies. It was found that the nature of the aromatic spacer influences the emission properties of the target α‐diketone triptycene copolymers, causing either a red or blue‐shift with respect to that of their ethynylene triptycene copolymer synthons. Copolymers 4a–c with fluorene spacers reveal emission in the range of 440–475 nm, thus, qualifying them to act as blue emitters. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 931–937     

Catalytically Active and Spectator Ce3+ in Ceria‐Supported Metal Catalysts

Identification of active species and the rate‐determining reaction steps are crucial for optimizing the performance of oxygen‐storage materials, which play an important role in catalysts lowering automotive emissions, as electrode materials for fuel cells, and as antioxidants in biomedicine. We demonstrated that active Ce³⁺ species in a ceria‐supported platinum catalyst during CO oxidation are short‐lived and therefore cannot be observed under steady‐state conditions. Using time‐resolved resonant X‐ray emission spectroscopy, we quantitatively correlated the initial rate of Ce³⁺ formation under transient conditions to the overall rate of CO oxidation under steady‐state conditions and showed that ceria reduction is a kinetically relevant step in CO oxidation, whereas a fraction of Ce³⁺ was present as spectators. This approach can be applied to various catalytic processes involving oxygen‐storage materials and reducible oxides to distinguish between redox and nonredox catalytic mechanisms.     

Tunable Trimers: Using Temperature and Pressure to Control Luminescent Emission in Gold(I) Pyrazolate‐Based Trimers

A systematic investigation into the relationship between the solid‐state luminescence and the intermolecular Au???Au interactions in a series of pyrazolate‐based gold(I) trimers; tris(μ₂‐pyrazolato‐N,N′)‐tri‐gold(I) ( 1 ), tris(μ₂‐3,4,5‐ trimethylpyrazolato‐N,N′)‐tri‐gold(I) ( 2 ), tris(μ₂‐3‐methyl‐5‐phenylpyrazolato‐N,N′)‐tri‐gold(I) ( 3 ) and tris(μ₂‐3,5‐diphenylpyrazolato‐N,N′)‐tri‐gold(I) ( 4 ) has been carried out using variable temperature and high pressure X‐ray crystallography, solid‐state emission spectroscopy, Raman spectroscopy and computational techniques. Single‐crystal X‐ray studies show that there is a significant reduction in the intertrimer Au???Au distances both with decreasing temperature and increasing pressure. In the four complexes, the reduction in temperature from 293 to 100 K is accompanied by a reduction in the shortest intermolecular Au???Au contacts of between 0.04 and 0.08 Å. The solid‐state luminescent emission spectra of 1 and 2 display a red shift with decreasing temperature or increasing pressure. Compound 3 does not emit under ambient conditions but displays increasingly red‐shifted luminescence upon cooling or compression. Compound 4 remains emissionless, consistent with the absence of intermolecular Au???Au interactions. The largest pressure induced shift in emission is observed in 2 with a red shift of approximately 630 cm^?1 per GPa between ambient and 3.80 GPa. The shifts in all the complexes can be correlated with changes in Au???Au distance observed by diffraction.     

Low‐oxidation‐potential conducting polymers derived from 3,4‐ethylenedioxythiophene and dialkoxybenzenes

Monomers derived from 3,4‐ethylenedioxythiophene and phenylenes with branched or oligomeric ether dialkoxy substituents were prepared with the Negishi coupling technique. Electrooxidative polymerization led to the corresponding dialkoxy‐substituted 3,4‐ethylenedioxythiophene–phenylene polymers, with extremely low oxidation potentials (E_1/2,p = ?0.16 to ?0.50 V vs Ag/Ag⁺) due to the highly electron‐rich nature of these materials. The polymers were electrochromic, reversibly switching from red to blue upon oxidation, with bandgaps at about 2 eV. The electrochemical behavior of the oligomeric ether‐substituted polymer was investigated in the presence of different metal ions. Films of the polymer exhibited electrochemical recognition for several alkali and alkaline‐earth cations with selectivity in the order Li⁺ > Ba²⁺ > Na⁺ > Mg²⁺. Cyclic voltammetry showed a decrease in the oxidation potential and an improvement in the definition of the voltammetric response, as well as an increase in the overall electroactivity of the polymer films when the concentration of the cations in the medium was increased. These results are discussed in terms of the electrostatic interactions between the complexed cation and the redox center, as well as the diffusion of the ionic species into the polymer matrix. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2164–2178, 2001     

New poly(p‐phenylene vinylene) derivatives with two oxadiazole rings per repeat unit: Synthesis,photophysical properties,electroluminescence, and metal ion recognition

Two new poly(p‐phenylene vinylene) derivatives OX1‐PPV and OX2‐PPV bearing two 1,3,4‐oxadiazole rings per repeat unit and a fully conjugated backbone with solubilizing dodecyloxy side groups were synthesized and investigated. The amorphous conjugated polymers had glass‐transition temperature values of 60–75 °C and emitted intense blue or greenish‐blue light in solution with photoluminescence (PL) emission maxima at 379–492 nm and PL quantum yields of 0.41–0.52. In the solid state they emitted yellowish‐green light with PL emission maxima at 533–555 nm. Cyclic voltammetry showed that both conjugated polymers had reversible reduction and irreversible oxidation, making them n‐type materials. The electron affinity of OX2‐PPV was estimated as 2.85 eV whereas that of OX1‐PPV was 2.75 eV. Yellow electroluminescence (EL) was achieved from single‐layer light‐emitting diodes of OX2‐PPV with an EL emission maximum at 555 nm and a brightness of 70 cd/m². Polymer OX2‐PPV, which was functionalized with 2,6‐bis(1,3,4‐oxadiazole‐2‐yl)pyridine, demonstrated sensitivity to various metal ions as a fluorescence‐mode chemosensor. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2112–2123, 2004     

Synthesis of Extremely π‐Extended Porphyrin Tapes from Hybrid meso‐meso Linked Porphyrin Arrays: An Approach Towards the Conjugation Length

Directly meso‐meso, β‐β, β‐β triply linked porphyrin arrays are exceptional π‐conjugated molecules exhibiting remarkably red‐shifted absorption bands extending deeply in the IR region. In order to determine the effective conjugated length (ECL), we embarked on the synthesis of the porphyrin tapes far beyond the 12‐mer, which is the longest we have prepared so far. In this study, to find the compromise between the feasibility of the meso‐meso coupling reaction up to longer arrays and the sufficient solubility and chemical stability of the resultant porphyrin tapes, we prepared hybrid meso‐meso linked porphyrin arrays BOn up to 24‐mer, which have two different aryl groups, a 2,4,6‐tris(3,5‐di‐tert‐butylphenoxy) phenyl group (Ar¹) and a 3,5‐dioctyloxy phenyl group (Ar²). All these arrays were effectively converted into the corresponding triply linked porphyrin tapes TBOn by oxidation with DDQ‐Sc(OTf)₃. Importantly, the low energy Q‐band‐like absorption bands of TBOn are progressively red‐shifted with an increase in the number of porphyrins n until 16 but the red‐shift is saturated at n=16, indicating the ECL of the porphyrin tape to be around 14–16. The regularly introduced meso‐aryl bulky substituents impose facial encumbrance, hence leading to the effective suppression of π–π interactions as well as improvement of the chemical stabilities of TBOn .     

Electrochemical Redox Behavior of Omeprazole Using a Glassy Carbon Electrode

The electrochemical redox behavior of omeprazole (OMZ), a gastric acid pump inhibitor, was investigated at a glassy carbon electrode using cyclic, differential pulse and square‐wave voltammetry over a wide pH range. The pH‐dependent oxidation occurs in two irreversible consecutive charge transfer reactions. Adsorption of the nonelectroactive product was also observed. The first oxidation involves removal of one electron, followed by deprotonation and leads to the formation of a hydroxylated species. The second oxidation process is related to the hydroxyl and amino groups in the benzimidazole moiety. The reduction is irreversible, also pH‐dependent, and occurs in a single step at the sulfoxide group in a diffusion‐controlled mechanism. The diffusion coefficient of omeprazole was calculated to be D_OMZ=2.31×10^?6 cm² s^?1.     

How Far Can We Go? Quantum‐Chemical Investigations of Oxidation State +IX

The highest known oxidation state of any element is +VIII. After the recent discovery of Ir^VIIIO₄ under cryogenic conditions, we have investigated the stability of cationic species [MO₄]⁺ (M=Rh,Ir,Mt). Such compounds would formally represent the new oxidation state +IX, which is experimentally unknown so far for the whole periodic table. [IrO₄]⁺ is predicted to be the most promising candidate. The calculated spin–orbit (SO) coupling shows only minor effects on the stability of the iridium species, whereas SO‐coupling increases enormously for the corresponding Eka‐Iridium (Meitnerium) complexes and destabilizes these.     

Catalytic Water Splitting with an Iridium Carbene Complex: A Theoretical Study

Catalytic water oxidation at Ir (OH)⁺ ( Ir =IrCp*(Me₂NHC), where Cp*=pentamethylcyclopentadienyl and Me₂NHC=N,N′‐dimethylimidazolin‐2‐ylidene) can occur through various competing channels. A potential‐energy surface showing these various multichannel reaction pathways provides a picture of how their importance can be influenced by changes in the oxidant potential. In the most favourable calculated mechanism, water oxidation occurs via a pathway that includes four sequential oxidation steps, prior to formation of the O?O bond. The first three oxidation steps are exothermic upon treatment with cerium ammonium nitrate and lead to formation of Ir ^V(?O)(O ^. )⁺, which is calculated to be the most stabile species under these conditions, whereas the fourth oxidation step is the potential‐energy‐determining step. O?O bond formation takes place by coupling of the two oxo ligands along a direct pathway in the rate‐limiting step. Dissociation of dioxygen occurs in two sequential steps, regenerating the starting material Ir (OH)⁺. The calculated mechanism fits well with the experimentally observed rate law: v=k_obs[ Ir ][oxidant]. The calculated effective barrier of 24.6 kcal mol^?1 fits well with the observed turnover frequency of 0.88 s^?1. Under strongly oxidative conditions, O?O bond formation after four sequential oxidation steps is the preferred pathway, whereas under milder conditions O?O bond formation after three sequential oxidation steps becomes competitive.     

Mechanistic Study on the Palladium(II)‐Catalyzed Synthesis of 2,3‐Disubstituted Indoles Under Aerobic Conditions: Anion Effects and the Development of a Low‐Catalyst‐Loading Process

As a result of detailed mechanistic and kinetic studies, we have proposed that PdX₂‐catalyzed oxidative coupling of o‐alkynylanilines 1 with terminal alkynes 2 under aerobic conditions is initiated by aminopalladation of 1 followed by ligand exchange of the resulting σ‐indolylpalladium(II) complex with 2 , reductive elimination and N‐demethylation. Side reactions associated with intermediates on the way to 2,3‐disubstituted indoles 3 were identified, and the roles of acetate and iodide in channeling the reaction towards the desired product were established. Based on kinetic and spectroscopic studies, the soluble iodide‐ligated Pd⁰ species was proposed to be the resting state of the catalyst and its oxidation to active Pd^II species was the turnover‐limiting step. Catalytic conditions with low loading of Pd(OAc)₂ (0.0005 to 0.001 equiv) were subsequently developed.     

Synthesis and Spectroscopic Properties of Phthalocyanine–[60]Fullerene Conjugates Connected Directly by Means of a Four‐Membered Ring

New covalently C₆₀‐conjugated phthalocyanine (Pc) analogues in which the Pc and C₆₀ components are connected by means of a four‐membered ring have been synthesized by taking advantage of a [2+2] cycloaddition reaction of C₆₀ with benzyne units generated from either a phthalocyanine derivative ( 8 ) or its precursor ( 1 ). The reaction of 1 with PhI(OAc)₂ and trifluoromethanesulfonic acid (TfOH) followed by the [2+2] cycloaddition of C₆₀ in the presence of tetra‐n‐butylammonium fluoride (TBAF) yielded the C₆₀‐substituted Pc precursor ( 3 ). Mixed condensation of 3 and 4,5‐dibutylsulfonylphthalonitrile ( 4 ) in a thermally promoted template reaction using a nickel salt successfully gave the Pc–C₆₀ conjugate ( 5 ). Results of mass spectrometry and ¹H and ¹³C NMR spectroscopy clearly indicate the formation of the anticipated Pc–C₆₀ conjugate. Direct coupling of C₆₀ with the Pc analogue that contained eight peripheral trimethylsilyl (TMS) groups ( 8 ) also proceeded successfully, such that mono and bis C₆₀‐adducts were detected by their mass, although the isolation of each derivative was difficult. The absorption and magnetic circular dichroism (MCD) spectra of 5 and the reference compound ( 7 ) differ from each other in the Q‐band region, thereby suggesting that the presence of the C₆₀ moiety affects the electronic structure of the conjugate. The reduction and oxidation potentials of 5 and 7 obtained by cyclic voltammetry are comparative, except for the C₆₀‐centered reduction couple at ?1.53 V versus Fc⁺/Fc in o‐dichlorobenzene (o‐DCB). A one‐electron reduction of 5 and 7 in tetrahydrofuran (THF) by using the sodium mirror technique results in the loss of band intensity in the Q‐band region, whereas the characteristic marker bands for Pc‐ring‐centered reduction appear at around 430, 600, and 900 nm for both compounds. The final spectral shapes of 5 and 7 upon the reduction resemble each other, thus indicating that no significant molecular orbital (MO) interactions between the C₆₀ and Pc units are present for the reduced species of 5 . In contrast, the oxidized species of 5 and 7 generated by the addition of NOBF₄ in CH₂Cl₂ show significantly different absorption spectra from each other. Whereas the broad bands at approximately 400–550 nm of 7 ⁺ are indicative of the cationic π‐radical species of metallo‐Pcs and can be assigned to a transition from a low‐lying MO to the half‐filled MO, no corresponding bands were observed for 5 ⁺. These spectral characteristics have been tentatively assigned to the delocalized occupied frontier MOs for 5 ⁺. The experimental results are broadly supported by DFT calculations.     

Copper‐Catalyzed Radical/Radical CH/PH Cross‐Coupling: α‐Phosphorylation of Aryl Ketone O‐Acetyloximes

The selective radical/radical cross‐coupling of two different organic radicals is a great challenge due to the inherent activity of radicals. In this paper, a copper‐catalyzed radical/radical C? H/P? H cross‐coupling has been developed. It provides a radical/radical cross‐coupling in a selective manner. This work offers a simple way toward β‐ketophosphonates by oxidative coupling of aryl ketone o‐acetyloximes with phosphine oxides using CuCl as catalyst and PCy₃ as ligand in dioxane under N₂ atmosphere at 130 °C for 5 h, and yields ranging from 47 % to 86 %. The preliminary mechanistic studies by electron paramagnetic resonance (EPR) showed that, 1) the reduction of ketone o‐acetyloximes generates iminium radicals, which could isomerize to α‐sp³‐carbon radical species; 2) phosphorus radicals were generated from the oxidation of phosphine oxides. Various aryl ketone o‐acetyloximes and phosphine oxides were suitable for this transformation.     

Copper‐Catalyzed Radical/Radical C?H/P?H Cross‐Coupling: α‐Phosphorylation of Aryl Ketone O‐Acetyloximes

The selective radical/radical cross‐coupling of two different organic radicals is a great challenge due to the inherent activity of radicals. In this paper, a copper‐catalyzed radical/radical C H/P H cross‐coupling has been developed. It provides a radical/radical cross‐coupling in a selective manner. This work offers a simple way toward β‐ketophosphonates by oxidative coupling of aryl ketone o‐acetyloximes with phosphine oxides using CuCl as catalyst and PCy₃ as ligand in dioxane under N₂ atmosphere at 130 °C for 5 h, and yields ranging from 47 % to 86 %. The preliminary mechanistic studies by electron paramagnetic resonance (EPR) showed that, 1) the reduction of ketone o‐acetyloximes generates iminium radicals, which could isomerize to α‐sp³‐carbon radical species; 2) phosphorus radicals were generated from the oxidation of phosphine oxides. Various aryl ketone o‐acetyloximes and phosphine oxides were suitable for this transformation.     

Nanoceria Supported Gold Catalysts for CO Oxidation

Two types of CeO₂ nanocubes (average size of 5 and 20 nm, respectively) prepared via the hydrothermal process were selected to load gold species via a deposition‐precipitation (DP) method. Various measurements, including X‐ray diffraction (XRD), Raman spectra, high resolution transmission electron microscopy (HRTEM), in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS), and temperature‐programmed reduction by hydrogen (H₂‐TPR), were applied to characterize the catalysts. It is found that the sample with ceria size of 20 nm (Au/CeO₂‐20) was covered by well dispersed both Au³⁺ and Au^δ+ (0 < δ < 1). For the other sample with ceria size of 5 nm (Au/CeO₂‐5), Au³⁺ is the dominant gold species. Au/CeO₂‐20 performed better catalytic activity for CO oxidation because of the strong CO adsorption of Au^δ+ in the catalysts. The catalytic activity of Au/CeO₂‐5 was improved due to the transformation of Au³⁺ to Au^δ+. Based on the CO oxidation and in situ DRIFTS results, Au^δ+ is likely to play a more important role in catalyzing CO oxidation reaction.