Design of selective molecularly imprinted sorbent for the optimized solid‐phase extraction of S‐pramipexole from the model multicomponent sample of human urine

The objective of this article was to design the selective molecularly imprinted sorbent dedicated to the solid‐phase extraction of S‐pramipexole from the complex matrix such as human urine. For that purpose, S‐2,6‐diamino‐4,5,6,7‐tetrahydrobenzothiazole was used as the template acting as the structural analog of S‐pramipexole and five various monomers were employed in the presence of ethylene glycol dimethacrylate to produce molecularly imprinted polymers. The binding capabilities of resulted polymers revealed that the highest imprinting effect was noted for polymer prepared from the itaconic acid. The comprehensive analysis of morphology and the characterization of binding sites showed not only negligible differences in the extension of surfaces of imprinted and nonimprinted polymers but also higher heterogeneity of binding sites in the imprinted material. Comprehensive optimization of the molecularly imprinted solid‐phase extraction allowed to select the most appropriate solvents for loading, washing, and elution steps. Subsequent optimization of mass of sorbent and volumes of solvents allowed to achieve satisfactory total recoveries of S‐pramipexole from the model multicomponent real sample of human urine that equals to 91.8 ± 3.2% for imprinted sorbent with comparison to only 37.1 ± 1.1% for Oasis MCX.     

Investigation of ractopamine‐imprinted polymer for dispersive solid‐phase extraction of trace β‐agonists in pig tissues

Ractopamine, as an alternative β‐agonist to clenbuterol, is more and more used as leanness‐enhancing agent in the swine industry. This work presents a new molecularly imprinted polymer (MIP) using ractopamine as template for dispersive solid‐phase extraction of trace ractopamine and the structural related β‐agonists in animal tissues. The binding properties and selectivity of MIP were investigated. High selectivity in polar environment was found, since the extraction capacity of ractopamine with the MIP was 4.5‐fold as much as that with the non‐imprinted polymer in acetonitrile. Cross‐selectivity investigation indicates that the MIP preferentially binds the template and then the structural analogues according to their molecular similarity. Thermodynamic and kinetic investigation was performed to interpret the specific adsorption and molecular recognition of the MIP for ractopamine. Standard free energy, standard enthalpy, and standard entropy were determined. Related information suggested that adsorption of ractopamine onto MIP was an exothermic, spontaneous process. The MIP can be applied as dispersive solid‐phase extraction material for enrichment of ractopamine, isoxsuprine, fenoterol and clenbuterol in complex samples before HPLC analysis. The method revealed detection limits of 0.20–0.90 μg/L, recoveries of 83.8–115.2 and 85.2–110.2% for the spiked pig muscle and pig liver, respectively, with the RSD from 2.5 to 8.8%.     

Ultra‐fast adenosine 5′‐triphosphate,adenosine 5′‐diphosphate and adenosine 5′‐monophosphate detection by pressure‐assisted capillary electrophoresis UV detection

Herein, we report a new CE method to measure adenine nucleotides adenosine 5′‐triphosphate, adenosine 5′‐diphosphate, and adenosine 5′‐monophosphate in red blood cells. For this purpose, 20 mmol/L sodium acetate buffer at pH 3.80 was used as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of 25 kV and an overimposed pressure of 0.2 psi from inlet to outlet. A rapid separation of these analytes in less than 1.5 min was obtained with a good reproducibility for intra‐ and inter‐assay (CV<4 and 8%, respectively) and an excellent analytical recovery (from 98.3 to 99%). The applicability of our method was proved by measuring adenine nucleotides in red blood cells.     

Urinary l‐kynurenine quantification and selective extraction through a molecularly imprinted solid‐phase extraction device

l ‐Kynurenine is an endogenous metabolite generated by the catabolic pathway of l ‐tryptophan and it could be a potential biomarker to test the efficacy of several checkpoint inhibitors that have already reached the clinical trials in the antitumor therapy. Thus, a molecularly imprinted polymer specific for the recognition of this metabolite was synthesized and used as innovative system in solid‐phase extraction technique for the specific extraction and quantification of l ‐kynurenine in human urine. The off‐line system was firstly tested on l ‐kynurenine standard solutions, allowing recoveries up to 97.7% (relative standard deviation = 2.2%) and then applied to fortified and deproteinated human urine samples, where a recovery of 84.1% (relative standard deviation = 3.1%) was obtained. The method was validated and it revealed a good linearity in the range of 0.157–20 μg/mL (r² = 0.9992). The optimized procedure demonstrated a good feasibility on biological samples, allowing a ready quantification of l ‐kynurenine in the human urine, where the metabolite was found at a very low concentration (0.80 μg/mL). The extraction system developed could attract attention of pharmaceutical industries for l ‐kynurenine production as potential drug in the treatment of autoimmune disorders through its extraction and purification from biological matrixes.     

Recovery and separation of erythromycin from industrial wastewater by imprinted magnetic nanoparticles that exploit β‐cyclodextrin as the functional monomer

A type of surface imprinting over magnetic Fe₃O₄ nanoparticles utilizing erythromycin‐A as a template for use in the separation and recovery of erythromycin was developed and investigated. As the intermolecular forces play a key role in the performance of imprinted materials, differential scanning calorimetry, and ¹H NMR spectroscopy was employed to evaluate the interactions between erythromycin and the functional monomer β‐cyclodextrin. To synthesize the surface imprinted polymers, magnetic Fe₃O₄ nanoparticles, the core materials, were modified with a free radical initiator to initialize polymerization in a “grafting from” manner. Then using acryloyl‐modified β‐cyclodextrin as the functional monomer and ethyleneglycol dimethacrylate as the cross‐linker, thin erythromycin‐imprinted films were fabricated by the radical‐induced graft copolymerization of monomers on the surface of the Fe₃O₄ nanoparticles. Selectivity experiments showed that the erythromycin‐A‐imprinted materials had recognition ability toward erythromycin derivatives. Finally, these magnetic molecularly imprinted particles were successfully used for the separation and enrichment of erythromycin from the mother liquor. The recovery, detected by high‐performance liquid chromatography and differential pulse voltammetry, approached 97%. The combination of the specific selectivity of the imprinted material and the magnetic separation provided a powerful tool that is simple, flexible, and selective for the separation and recovery of erythromycin.     

Polydopamine‐coated magnetic molecularly imprinted polymer for the selective solid‐phase extraction of cinnamic acid,ferulic acid and caffeic acid from radix scrophulariae sample

We describe novel cinnamic acid polydopamine‐coated magnetic imprinted polymers for the simultaneous selective extraction of cinnamic acid, ferulic acid and caffeic acid from radix scrophulariae sample. The novel magnetic imprinted polymers were synthesized by surface imprinting polymerization using magnetic multi‐walled carbon nanotubes as the support material, cinnamic acid as the template and dopamine as the functional monomer. The magnetic imprinted polymers were characterized by transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy and vibrating sample magnetometry. The results revealed that the magnetic imprinted polymers had outstanding magnetic properties, high adsorption capacity, selectivity and fast kinetic binding toward cinnamic acid, ferulic acid and caffeic acid. Coupled with high‐performance liquid chromatography, the extraction conditions of the magnetic imprinted polymers as a magnetic solid‐phase extraction sorbent were investigated in detail. The proposed imprinted magnetic solid phase extraction procedure has been used for the purification and enrichment of cinnamic acid, ferulic acid and caffeic acid successfully from radix scrophulariae extraction sample with recoveries of 92.4–115.0% for cinnamic acid, 89.4–103.0% for ferulic acid and 86.6–96.0% for caffeic acid.     

Synthesis of molecularly imprinted polymer adsorbents for solid‐phase extraction of strobilurin fungicides from agricultural products

Molecularly imprinted polymers for strobilurin fungicides were prepared by precipitation polymerization employing azoxystrobin as template molecular together with methacrylic acid monomer and trimethylolpropane triacrylate cross‐linker. Morphological characterization showed molecularly imprinted polymers were uniform spherical particles with about 0.2 μm in diameter, while the morphologies of nonimprinted polymers were irregular bulk. The equilibrium binding and selective experiments proved that molecularly imprinted polymers possessed a higher affinity toward four fungicides compared to nonimprinted polymers and heterogeneous binding sites were found in the molecularly imprinted polymers. Molecularly imprinted solid‐phase extraction conditions, including sample loading solvents, selective washing, and elution solvents, were carefully optimized. The developed method showed good recoveries (70.0–114.0%) with relative standard deviations in range of 1.0–9.8% (n  =  3) for samples (cucumber and peach) spiked at three different levels (10, 50, and 100 μg/ kg). The detection limit (signal/noise = 3) ranged from 0.01 to 0.08 μg/kg. The results demonstrated good potential use of this convenient and highly efficient method for determining trace strobilurin fungicides in agricultural products.     

Preconcentration of indapamide from human urine using molecularly imprinted solid‐phase extraction

A simple, sensitive, and selective molecularly imprinted solid‐phase extraction and spectrophotometric method has been developed for the clean‐up and preconcentration of indapamide from human urine. Molecularly imprinted polymers were prepared by a non‐covalent imprinting approach using indapamide as a template molecule, 2‐(trifluoromethyl) acrylic acid as a functional monomer, ethylene glycol dimethacrylate as a crosslinker, N,N‐azobisisobutyronitrile as a thermal initiator and acetonitrile as a porogenic solvent. A non‐imprinted polymer was also prepared in the same way, but in the absence of template. Molecularly imprinted polymer and non‐imprinted polymer sorbents were dry‐packed into solid‐phase extraction cartridges. Eluates from cartridges were analyzed using a spectrophotometer for the determination of indapamide by referring to the calibration curve in the range 0.14–1.50 μg/mL. Preconcentration factor, limit of detection, and limit of quantification were 16.30, 0.025 μg/mL, and 0.075 μg/mL, respectively. A relatively high imprinting factor (9.3) was also achieved and recovery values for the indapamide spiked into human urine were in the range of 80.1–81.2%. In addition, relatively low within‐day (0.17–0.42%) and between‐day (1.1–1.4%) precision values were obtained as well. The proposed molecularly imprinted solid‐phase extraction and spectrophotometric method was successfully applied to selective extraction, preconcentration, and determination of indapamide from human urine samples.     

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d‐maltosyl‐β‐cyclodextrin

Photoirradiation surface molecularly imprinted polymers for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin were synthesized using functionalized silica as a matrix, 4‐(phenyldiazenyl)phenol as a light‐sensitive monomer, and 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin as a template. Fourier transform infrared spectroscopy results indicated that 4‐(phenyldiazenyl)phenol was grafted onto the surface of functionalized silica. The obtained imprinted polymers exhibited specific recognition toward 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin. Equilibrium binding experiments showed that the photoirradiation surface molecularly imprinted polymers obtained the maximum adsorption amount of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin at 20.5 mg/g. In binding kinetic experiments, the adsorption reached saturation within 2 h with binding capacity of 72.8%. The experimental results showed that the adsorption capacity and selectivity of imprinted polymers were effective for the separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin, indicating that imprinted polymers could be used to isolate 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin from a conversion mixture containing β‐cyclodextrin and maltose. The results showed that the imprinted polymers prepared by this method were very promising for the selective separation of 6‐O‐α‐d ‐maltosyl‐β‐cyclodextrin.     

Preparation of 17β‐estradiol‐imprinted material by surface‐initiated atom transfer radical polymerization and its application

A novel 17β‐estradiol molecularly imprinted polymer was grafted onto the surface of initiator‐immobilized silica by surface‐initiated atom transfer radical polymerization. The resulting molecularly imprinted polymer was characterized by elemental analysis and thermogravimetric analysis. The binding property of molecularly imprinted polymer for 17β‐estradiol was also studied with both static and dynamic methods. The results showed that the molecularly imprinted polymer possessed excellent recognition capacity for 17β‐estradiol (180.65 mg/g at 298 K), and also exhibited outstanding selectivity for 17β‐estradiol over the other competitive compounds (such as testosterone and progesterone). Then, the determination of trace 17β‐estradiol in beef samples was successfully developed by using molecularly imprinted polymer solid‐phase extraction coupled with high‐performance liquid chromatography. The limit of detection was 0.25 ng/mL, and the amount of 17β‐estradiol in beef samples was detected at 2.83 ng/g. This work proposed a sensitive, rapid, reliable, and convenient approach for the determination of trace 17β‐estradiol in complicated beef samples.     

Magnetic molecularly imprinted polymer for the efficient and selective preconcentration of diazinon before its determination by high‐performance liquid chromatography

A molecularly imprinted polymer was selectively applied for solid‐phase extraction and diazinon residues enrichment before high‐performance liquid chromatography. Diazinon was thermally copolymerized with Fe₃O₄@polyethyleneglycol nanoparticles, methacrylic acid (functional monomer), 2‐hydroxyethyl methacrylate (co‐monomer), and ethylene glycol dimethacrylate (cross‐linking monomer) in the presence of acetonitrile (porogen) and 2,2‐azobisisobutyronitrile (initiator). Then, the imprinted diazinon was reproducibly eluted with methanol/acetic acid (9:1, v/v). The sorbent particles were characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The comprehensive study of variables through experimental design showed that the maximum performance was achieved under these conditions: pH 7, 10 mL sample volume, 15 mg sorbent, 10 min vortex time, 5 min ultrasonic time, 200 μL methanol/acetic acid (9:1, v/v) as eluent, and 5 min desorption time. Under optimized conditions, the molecularly imprinted polymer solid‐phase extraction method demonstrated a linear range (0.02–5 g/mL), a correlation coefficient of 0.997, and 0.005 g/mL detection limit.     

Selective solid‐phase extraction using a molecularly imprinted polymer for the analysis of patulin in apple‐based foods

The aim of this work was to evaluate the use of a molecularly imprinted polymer as a selective solid‐phase extraction sorbent for the clean‐up and pre‐concentration of patulin from apple‐based food products. Ultra high pressure liquid chromatography coupled to ultraviolet absorbance detection was used for the analysis of patulin. The molecularly imprinted polymer was applied, for the first time, to the determination of patulin in apple juice, puree and jam samples spiked within the maximum levels specified by the European Commission No. 1881/2006. High recoveries (>77%) were obtained. The method was validated and found to be linear in the range 2–100 μg/kg with correlation coefficients greater than 0.965 and repeatability relative standard deviation below 11% in all cases. Compared with dispersive solid‐phase extraction (QuEChERS method) and octadecyl sorbent, the molecularly imprinted polymer showed higher recoveries and selectivity for patulin. The application of Affinisep molecularly imprinted polymer as a selective sorbent material for detection of patulin fulfilled the method performance criteria required by the Commission Regulation No. 401/2006, demonstrating the suitability of the technique for the control of patulin at low ppb levels in different apple‐based foods such as juice, puree and jam samples.     

A new ionic liquid surface‐imprinted polymer for selective solid‐phase‐extraction and determination of sulfonamides in environmental samples

Toward improving the selective adsorption performance of molecularly imprinted polymers in strong polar solvents, in this work, a new ionic liquid functional monomer, 1‐butyl‐3‐vinylimidazolium bromide, was used to synthesize sulfamethoxazole imprinted polymer in methanol. The resulting molecularly imprinted polymer was characterized by Fourier transform infrared spectra and scanning electron microscopy, and the rebinding mechanism of the molecularly imprinted polymer for sulfonamides was studied. A static equilibrium experiment revealed that the as‐obtained molecularly imprinted polymer had higher molecular recognition for sulfonamides (e.g., sulfamethoxazole, sulfamonomethoxine, and sulfadiazine) in methanol; however, its adsorption of interferent (e.g., diphenylamine, metronidazole, 2,4‐dichlorophenol, and m‐dihydroxybenzene) was quite low. ¹H NMR spectroscopy indicated that the excellent recognition performance of the imprinted polymer was based primarily on hydrogen bond, electrostatic and π‐π interactions. Furthermore, the molecularly imprinted polymer can be employed as a solid phase extraction sorbent to effectively extract sulfamethoxazole from a mixed solution. Combined with high‐performance liquid chromatography analysis, a valid molecularly imprinted polymer‐solid phase extraction protocol was established for extraction and detection of trace sulfamethoxazole in spiked soil and sediment samples, and with a recovery that ranged from 93–107%, and a relative standard deviation of lower than 9.7%.     

Facile preparation of polydopamine‐coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples

Estrone molecularly imprinted polymers were synthesized through the self‐polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption–desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid‐phase extraction with high‐performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2–20 μg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.     

Molecularly imprinted polymer coating on metal‐organic frameworks for solid‐phase extraction of fluoroquinolones from water

In this work, a novel surface molecularly imprinted polymer with high adsorption capacity, high adsorption rate, and high selectivity for fluoroquinolones was prepared on the surface of UiO‐66‐NH₂, which is a kind of metal‐organic framework. The surface morphology and adsorption properties of this molecularly imprinted polymer were investigated. The maximum adsorption capacity was 99.19 mg/g, and adsorption equilibrium was achieved within 65 s. Combined with reversed‐phase high‐performance liquid chromatography, the molecularly imprinted polymer was used to selectively enrich, separate and analyze fluoroquinolones present in lake water. The results showed that the recoveries of the four fluoroquinolones were 92.6–100.5%, and the relative standard deviations were 2.9–6.4% (n = 3). The novel molecularly imprinted polymer is an excellent adsorbent and has broad application prospects in the enrichment and separation of trace analytes in complex samples.     

Supramolecular inclusion complexes of a star polymer containing cholesterol end‐capped poly(ε‐caprolactone) arms with β‐cyclodextrin

A novel hexa‐armed and star‐shaped polymer containing cholesterol end‐capped poly(ε‐caprolactone) arms emanating from a phosphazene core (N₃P₃‐(PCL‐Chol)₆) was synthesized by a combination of ring‐opening polymerization and “click” chemistry techniques. For this purpose, the terminal ? OH groups of the synthesized precursor (N₃P₃‐(PCL‐OH)₆) were converted into –Chol through a series of reaction. Both N₃P₃‐(PCL‐OH)₆ and N₃P₃‐(PCL‐Chol)₆ were then employed in the preparation of supramolecular inclusion complexes (ICs) with β‐cyclodextrin (β‐CD). The latter formed ICs with β‐CD in higher yield. The host–guest stoichiometry (ε‐CL:β‐CD, mol:mol) in the ICs of N₃P₃‐(PCL‐Chol)₆ was found to be 1.2. The formation of supramolecular ICs of N₃P₃‐(PCL‐Chol)₆ with β‐CD was confirmed by using Fourier transform infrared (FTIR) and ¹H nuclear magnetic resonance (NMR) spectroscopic methods, wide‐angle X‐ray diffraction (WAXD), and thermal analysis techniques. WAXD data showed that the obtained ICs with N₃P₃‐(PCL‐Chol)₆ had a channel‐type crystalline structure, indicating the suppression of the original crystallization of N₃P₃‐(PCL‐Chol)₆ in β‐CD cavities. Moreover, the thermal stabilities of ICs were found to be higher than those of the free star polymer and β‐CD. Furthermore, the surface properties of N₃P₃‐(PCL‐Chol)₆ and its ICs with β‐CD were investigated by static contact angle measurements. The obtained results proved that the wettability of N₃P₃‐(PCL‐Chol)₆ successfully increased with the formation of its ICs with β‐CD. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3406–3420     

Ultratrace analysis of uracil and 5‐fluorouracil by molecularly imprinted polymer brushes grafted to silylated solid‐phase microextraction fiber in combination with complementary molecularly imprinted polymer‐based sensor

Main inborn errors of metabolism diagnosable through uracil (Ura) analysis and the therapeutic monitoring of toxic 5‐fluorouracil (5FU) in dihydro pyrimidine dehydrogenase (DPD) deficient patients require a sensitive, reproducible, selective and accurate method. In this work, an artificial receptor in the format of molecularly imprinted polymer (MIP) brush ‘grafted to’ the surface of sol–gel immobilized on cost‐effective homemade solid‐phase microextraction (SPME) fibers, individually imprinted with either of Ura and 5FU, was used in combination with a voltammetric sensor duly modified with the same MIP. This combination provided up to 10‐ and 8.4‐fold preconcentrations of Ura and 5FU, respectively, which was more than sufficient for achieving stringent detection limits in the primitive diagnosis of uracil disorders and fluoropyrimidine toxicity in DPD‐deficient patients. The proposed method permits the assessment of Ura and 5FU plasma concentrations with detection limits pf 0.0245 and 0.0484 ng mL^?1 (RSD = 1.0–2.5%, S/N = 3), respectively, without any problems of non‐specific false‐positives and cross‐reactivities in complicated matrices of biological samples. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and application of molecularly imprinted polymer solid‐phase microextraction fiber for the selective analysis of auxins in tobacco

As signal molecules, auxins play an important role in mediating plant growth. Due to serious interfering substances in plants, it is difficult to accurately detect auxins with traditional solid‐phase extraction methods. To improve the selectivity of sample pretreatment, a novel molecularly imprinted polymer ‐coated solid‐phase microextraction fiber, which could be coupled directly to high‐performance liquid chromatography, was prepared with indole acetic acid as template molecule for the selective extraction of auxins. The factors influencing the polymer formation, such as polymerization solvent, cross‐linker, and polymerization time, were investigated in detail to enhance the performance of indole acetic acid‐molecularly imprinted polymer coating. The morphological and chemical stability of this molecularly imprinted polymer‐coated fiber was characterized by scanning electron microscopy, infrared spectrometry, and thermal analysis. The extraction capacity of the molecularly imprinted polymer‐coated solid‐phase microextraction fiber was evaluated for the selective extraction of indole acetic acid and indole‐3‐pyruvic acid followed by high‐performance liquid chromatography analysis. The linear range for indole acetic acid and indole‐3‐pyruvic acid was 1–100 µg/L and their detection limit was 0.5 µg/L. The method was applied to the simultaneous determination of two auxins in two kinds of tobacco (Nicotiana tabacum L and Nicotiana rustica L) samples, with recoveries range from 82.1 to 120.6%.     

Novel molecularly imprinted monolithic column for selective on-line extraction of ciprofloxacin from human urine

Water-compatible ciprofloxacin-imprinted monolithic columns were synthesized in water-containing systems for selective extraction of ciprofloxacin from human urine samples. Methanol-water (10:3, v/v) was used as a porogenic solvent and the obtained monolithic imprinted polymers reveal high selectivity to ciprofloxacin in an aqueous environment; the affinity can be easily controlled by adjusting the pH of the mobile phase. Owing to the unique porous structure and flow-through channels existing in the network skeleton of the monolithic MIP, urine samples could be directly injected into the column, proteins and other biological matrix were quickly washed out and ciprofloxacin was selectively retained and enriched. Good linearity was obtained from 0.08 to 400 mg/L (r=0.998) with the relative standard deviations less than 3.6%. The limit of detection of the method was 0.04 mg/L and the recoveries were more than 94.5% at three different concentrations. Moreover, by increasing the injection volume to 2.0 mL, the sensitivity of the method could be improved 100-fold according to the peak height of ciprofloxacin. This expedient greatly simplified the overall procedure, resulting in a rapid and efficient sample analysis while maintaining precision and accuracy.     

Synthesis of molecularly imprinted polypyrrole as an adsorbent for solid‐phase extraction of warfarin from human plasma and urine

The aim of this work was to develop a method for the clean‐up and preconcentration of warfarin from biological sample employing a new molecularly imprinted polymer (MIP) as a selective adsorbent for solid‐phase extraction (SPE). This MIP was synthesized using warfarin as a template, pyrrole as a functional monomer and vinyl triethoxysilane as a cross‐linker. The molar ratio of 1:4:20 (template–functional monomer–cross‐linker) showed the best results. Nonimprinted polymers (NIPs) were prepared and treated with the same method, but in the absence of warfarin. The prepared polymer was characterized by Fourier transmission infrared spectrometry and scanning electron microscopy. An adsorption process (SPE) for the removal of warfarin using the fabricated MIPs and NIPs was evaluated under various conditions. Effective parameters on warfarin extraction, for example, type and volume of elution solvent, pH of sample solution, breakthrough volume and maximum loading capacity, were studied. The limits of detection were in the range of 0.0035–0.0050 µg mL^?1. Linearity of the method was determined in the range of 0.0165–10.0000 µg mL^?1 for plasma and 0.0115–10.0000 µg mL^?1 for urine with coefficients of determination (R²) ranging from 0.9975 to 0.9985. The recoveries for plasma and urine samples were >95%. Copyright © 2015 John Wiley & Sons, Ltd.