Charge Transport between Coupling Colloidal Perovskite Quantum Dots Assisted by Functional Conjugated Ligands

Long alkyl‐chain capping ligands are indispensable for preparing stable colloidal quantum dots. However, its insulating feature blocks efficient carrier transport among QDs, leading to inferior performance in light‐emitting diodes (LEDs). The trade‐off between conductivity and colloidal stability of QDs has now been overcome. Methylamine lead bromide (MAPbBr₃) QDs with a conjugated alkyl‐amine, 3‐phenyl‐2‐propen‐1‐amine (PPA), as ligands were prepared. Owing to electron cloud overlapping and the delocalization effect of conjugated molecules, the conductivity and carrier mobility of PPA‐QDs films increased almost 22 times over that of OA‐QD films without compromising colloidal stability and photoluminescence. PPA‐QDs LEDs exhibit a maximum current efficiency of 9.08 cd A^?1, which is 8 times of that of OA‐QDs LEDs (1.14 cd A^?1). This work provides critical solution for the poor conductivity of QDs in applications of energy‐related devices.     

Colloidal nano-MOFs nucleate and stabilize ultra-small quantum dots of lead bromide perovskites

The development of synthetic routes to access stable, ultra-small (i.e. <5 nm) lead halide perovskite (LHP) quantum dots (QDs) is of fundamental and technological interest. The considerable challenges include the high solubility of the ionic LHPs in polar solvents and aggregation to form larger particles. Here, we demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites. Cr₃O(OH)(H₂O)₂(terephthalate)₃ (Cr-MIL-101), made of large mesopore-sized pseudo-spherical cages, allows fast and efficient diffusion of perovskite precursors within its pores, and promotes the formation of stable, ∼3 nm-wide lead bromide perovskite QDs. CsPbBr₃, MAPbBr₃ (MA⁺ = methylammonium), and (FA)PbBr₃ (FA⁺ = formamidinium) QDs exhibit significantly blue-shifted emission maxima at 440 nm, 446 nm, and 450 nm, respectively, as expected for strongly confined perovskite QDs. Optical characterization and composite modelling confirm that the APbBr₃ (A = Cs, MA, FA) QDs owe their stability within the MIL-101 nanocrystals to both short- and long-range interfacial interactions with the MOF pore walls.

We demonstrate a simple and effective host–guest strategy for preparing ultra-small lead bromide perovskite QDs through the use of nano-sized MOFs that function as nucleating and host sites.     

Encapsulating Perovskite Quantum Dots in Iron‐Based Metal–Organic Frameworks (MOFs) for Efficient Photocatalytic CO2 Reduction

Improving the stability of lead halide perovskite quantum dots (QDs) in a system containing water is the key for their practical application in artificial photosynthesis. Herein, we encapsulate low‐cost CH₃NH₃PbI₃ (MAPbI₃) perovskite QDs in the pores of earth‐abundant Fe‐porphyrin based metal organic framework (MOF) PCN‐221(Fe_x) by a sequential deposition route, to construct a series of composite photocatalysts of MAPbI₃@PCN‐221(Fe_x) (x=0–1). Protected by the MOF the composite photocatalysts exhibit much improved stability in reaction systems containing water. The close contact of QDs to the Fe catalytic site in the MOF, allows the photogenerated electrons in the QDs to transfer rapidly the Fe catalytic sites to enhance the photocatalytic activity for CO₂ reduction. Using water as an electron source, MAPbI₃@PCN‐221(Fe_0.2) exhibits a record‐high total yield of 1559 μmol g^?1 for photocatalytic CO₂ reduction to CO (34 %) and CH₄ (66 %), 38 times higher than that of PCN‐221(Fe_0.2) in the absence of perovskite QDs.     

Versatile Tri(pyrazolyl)phosphanes as Phosphorus Precursors for the Synthesis of Highly Emitting InP/ZnS Quantum Dots

Tri(pyrazolyl)phosphanes ( 5 ^R1,R2) are utilized as an alternative, cheap and low‐toxic phosphorus source for the convenient synthesis of InP/ZnS quantum dots (QDs). From these precursors, remarkably long‐term stable stock solutions (>6 months) of P(OLA)₃ (OLAH=oleylamine) are generated from which the respective pyrazoles are conveniently recovered. P(OLA)₃ acts simultaneously as phosphorus source and reducing agent in the synthesis of highly emitting InP/ZnS core/shell QDs. These QDs are characterized by a spectral range between 530–620 nm and photoluminescence quantum yields (PL QYs) between 51–62 %. A proof‐of‐concept white light‐emitting diode (LED) applying the InP/ZnS QDs as a color‐conversion layer was built to demonstrate their applicability and processibility.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Synthesis of Multifunctional Mn‐Doped CdTe/ZnS Core/Shell Quantum Dots

The synthesis of a novel water‐soluble Mn‐doped CdTe/ZnS core‐shell quantum dots using a proposed ultrasonic assistant method and 3‐mercaptopropionic acid (MPA) as stabilizer is descried. To obtain a high luminescent intensity, post‐preparative treatments, including the pH value, reaction temperature, reflux time and atmosphere, have been investigated. For an excellent fluorescence of Mn‐doped CdTe/ZnS, the optimal conditions were pH 11, reflux temperature 100°C and reflux time 3 h under N₂ atmosphere. While for phosphorescent Mn‐doped CdTe/ZnS QDs, the synthesis at pH 11, reflux temperature 100°C and reflux time 3 h under air atmosphere gave the best strong phosphorescence. The characterizations of Mn‐doped CdTe/ZnS QDs were also identified using AFM, IR, powder XRD and thermogravimetric analysis. The data indicated that the photochemical stability and the photoluminescence of CdTe QDs are greatly enhanced by the outer inorganic ZnS shell, and the doping Mn²⁺ ions in the as‐prepared quantum dots contribute to strong luminescence. The strong luminescence of Mn‐doped CdTe/ZnS QDs reflected that Mn ions act as recombination centers for the excited electron‐hole pairs, attributing to the transition from the triplet state (⁴T₁) to the ground state (⁶A₁) of the Mn²⁺ ions. All the experiments demonstrated that the surface states played important roles in the optical properties of Mn‐doped CdTe/ZnS core‐shell quantum dots.     

Dual‐Shelled RbLi(Li3SiO4)2:Eu2+@Al2O3@ODTMS Phosphor as a Stable Green Emitter for High‐Power LED Backlights

The stability of luminescent materials is a key factor for the practical application in white light‐emitting diodes (LEDs). Poor chemical stability of narrow‐band green‐emitting RbLi(Li₃SiO₄)₂:Eu²⁺ (RLSO:Eu²⁺) phosphor hinders their further commercialization even if they have excellent stability against thermal quenching. Herein, we propose an efficient protection scheme by combining the surface coating of amorphous Al₂O₃ and hydrophobic modification by octadecyltrimethoxysilane (ODTMS) to construct the moisture‐resistant dual‐shelled RLSO:Eu²⁺@Al₂O₃@ODTMS composite. The growth mechanisms of both the Al₂O₃ inorganic layer and the silane organic layer on the phosphor surface are investigated. The results remarkably improve the water‐stability of this narrow‐band green emitter. The evaluation of the white LED by employing this composite as the green component demonstrates that RLSO:Eu²⁺@Al₂O₃@ODTMS is a promising candidate for the high‐performance display backlights, and this dual‐shelled strategy provides an alternative method to improve the moisture‐resistant property of humidity‐sensitive phosphors.     

Controlled Growth of CH3NH3PbBr3 Perovskite Nanocrystals via a Water–Oil Interfacial Synthesis Method

Fundamental insights into the reaction kinetics of organic–inorganic lead halide perovskite nanocrystals (LHP NCs) are still limited due to their ultrafast formation rate. Herein, we develop a water–oil interfacial synthesis of MAPbBr₃ NCs (MA=CH₃NH₃⁺), which prolongs the reaction time to tens of minutes. This method makes it possible to monitor in situ the formation process of MAPbBr₃ NCs and observe successive spectral evolutions from 438 to 534 nm in a single reaction by extending reaction time. The implementation of this method depends on reducing the formation rate of PbBr₆^4? octahedra and the diffusion rate of MA. The formation of PbBr₆^4? is a rate‐determining step, and the biphasic system offers a favorable reaction condition to control the mass transfer of MA. The effects of temperature and concentration of precursor and ligand are investigated in detail.     

Controlled Growth of Monocrystalline Organo‐Lead Halide Perovskite and Its Application in Photonic Devices

Organo‐lead halide perovskites (OHPs) have recently emerged as a new class of exceptional optoelectronic materials, which may find use in many applications, including solar cells, light emitting diodes, and photodetectors. More complex applications, such as lasers and electro‐optic modulators, require the use of monocrystalline perovskite materials to reach their ultimate performance levels. Conventional methods for forming single crystals of OHPs like methylammonium lead bromide (MAPbBr₃) afford limited control over the product morphology, rendering the assembly of defined microcavity nanostructures difficult. We overcame this by synthesizing for the first time (MA)[PbBr₃]⋅DMF ( 1 ), and demonstrating its facile transformation into monocrystalline MAPbBr₃ microplatelets. The MAPbBr₃ microplatelets were tailored into waveguide based photonic devices, of which an ultra‐low propagation loss of 0.04 dB μm⁻¹ for a propagation distance of 100 μm was demonstrated. An efficient active electro‐optical modulator (AEOM) consisting of a MAPbBr₃ non‐linear arc waveguide was demonstrated, exhibiting a 98.4 % PL intensity modulation with an external voltage of 45 V. This novel synthetic approach, as well as the demonstration of effective waveguiding, will pave the way for developing a wide range of photonic devices based on organo‐lead halide perovskites.     

Formation of superhydrophobic cerium oxide surfaces on aluminum substrate and its corrosion resistance properties

Superhydrophobic cerium oxide film was introduced to aluminum substrate by an in‐situ growth process and surface modification. Different molar ratios between Ce(NO₃)₃ · 6H₂O and C₆H₁₂N₄ were involved in this research. The morphologies, chemical compositions and wetting properties of the films were analyzed by scanning electron microscopy (SEM), energy dispersive X‐ray detector, Fourier transfer infrared spectrometer and water contact angle (WCA) measurement, respectively. A great WCA of 158.8^o with a low angle hysteresis of about 3^o was obtained. Combination of uniform hierarchical micro‐nanostructure as revealed by SEM together with the hydrophobic alkyl groups from stearic acid was found to be responsible for the superior superhydrophobic property. The corrosion resistance performance of the superhydrophobic surface was evaluated by immersing in sodium chloride aqueous solution, the WCA kept as high as 152.1^o after immersion for 21 days, indicating our superhydrophobic surfaces had high chemical stability and durability in corrosive medium. Copyright © 2013 John Wiley & Sons, Ltd.     

Prussian Blue Nanocubes‐SnO2 Quantum Dots‐Reduced Graphene Oxide Ternary Nanocomposite: An Efficient Non‐noble‐metal Electrocatalyst for Non‐enzymatic Detection of H2O2

Developing non‐noble‐metal electrocatalyst for non‐enzymatic H₂O₂ sensing is highly attractive. A facile, two‐step approach has been utilized for the synthesis of PBNCs/SnO₂ QDs/RGO ternary nanocomposite. TEM, SEM, XPS, and XRD techniques were used to the characterize the structural and morphological properties of synthesized ternary nanocomposite. The synthesized ternary nanocomposite has been examined as an electrode material for the electrochemical detection of H₂O₂ using the Amperometry technique. Under optimum conditions, PBNCs/SnO₂ QDs/RGO ternary nanocomposite performed very well in the electrocatalytic reduction of H₂O₂ with a linear dynamic range from 25–225 μM (R²=0.996) with a low detection limit of 71 nM (S/N=3). Compared to the recent literature, PBNCs/SnO₂QDs/RGO ternary nanocomposite based modified electrode exhibit a wider linear dynamic range with a low detection limit. Furthermore, PBNCs/SnO₂ QDs/RGO ternary nanocomposite based modified electrode showed an excellent anti‐interference ability against various common interfering agents. The practical applicability of this ternary nanocomposite based modified electrode was further extended to determine the H₂O₂ in tap water with acceptable recovery. The present performance of PBNCs/SnO₂ QDs/RGO ternary nanocomposite material towards H₂O₂ sensing might widen its application for developing a new type of non‐noble metal‐based non‐enzymatic electrochemical biosensors.     

Auger Ionization Beats Photo‐Oxidation of Semiconductor Quantum Dots: Extended Stability of Single‐Molecule Photoluminescence

Despite the bright and tuneable photoluminescence (PL) of semiconductor quantum dots (QDs), the PL instability induced by Auger recombination and oxidation poses a major challenge in single‐molecule applications of QDs. The incomplete information about Auger recombination and oxidation is an obstacle in the resolution of this challenge. Here, we report for the first time that Auger‐ionized QDs beat self‐sensitized oxidation and the non‐digitized PL intensity loss. Although high‐intensity photoactivation insistently induces PL blinking, the transient escape of QDs into the ultrafast Auger recombination cycle prevents generation of singlet oxygen (¹O₂) and preserves the PL intensity. By the detection of the NIR phosphorescence of ¹O₂ and evaluation of the photostability of single QDs in aerobic, anaerobic, and ¹O₂ scavenger‐enriched environments, we disclose relations of Auger ionization and ¹O₂‐mediated oxidation to the PL stability of single QDs, which will be useful during the formulation of QD‐based single‐molecule imaging tools and single‐photon devices.     

Modulating Hierarchical Micro/Mesoporosity by a Mixed Solvent Approach in Al-MOF: Stabilization of MAPbBr3 Quantum Dots

Various hierarchical micro/mesoporous MOFs based on {[Al(μ-OH)(1,4-NDC)]⋅H₂O} ( MOF1 ) with tunable porosities (pore volume and surface area) have been synthesized by assembling Al^III and 1,4-NDC (1,4-naphthalenedicarboxylate) under microwave irradiation by varying water/ethanol solvent ratio. Water/ethanol mixture has played a crucial role in the mesopore generation in MOF1M₂₅ , MOF1M₅₀ , and MOF1M₇₅ , which is achieved by in situ formation of water/ethanol clusters. By adjusting the ratio of water/ethanol, the particle size, surface area and micro/mesopore volume fraction of the MOFs are controlled. Furthermore, reaction time plays a critical role in mesopore formation as realized by varying reaction time for the MOF with 50 % ethanol ( MOF1M₅₀ ). Additionally, hierarchical MOF ( MOF1M₅₀ ) has been used as a template for the stabilization of MAPbBr₃ (MA=methylammonium) perovskite quantum dots (PQDs). MAPbBr₃ PQDs are grown inside MOF1M₅₀ , where mesopores control the size of PQDs which leads to quantum confinement.     

Highly Luminescent and Ultrastable CsPbBr3 Perovskite Quantum Dots Incorporated into a Silica/Alumina Monolith

We successfully prepared QDs incorporated into a silica/alumina monolith (QDs‐SAM) by a simple sol–gel reaction of an Al–Si single precursor with CsPbBr₃ QDs blended in toluene solution, without adding water and catalyst. The resultant transparent monolith exhibits high photoluminescence quantum yields (PLQY) up to 90 %, and good photostability under strong illumination of blue light for 300 h. We show that the preliminary ligand exchange of didodecyl dimethyl ammonium bromide (DDAB) was very important to protect CsPbBr₃ QDs from surface damages during the sol–gel reaction, which not only allowed us to maintain the original optical properties of CsPbBr₃ QDs but also prevented the aggregation of QDs and made the monolith transparent. The CsPbBr₃ QDs‐SAM in powder form was easily mixed into the resins and applied as color‐converting layer with curing on blue light‐emitting diodes (LED). The material showed a high luminous efficacy of 80 lm W⁻¹ and a narrow emission with a full width at half maximum (FWHM) of 25 nm.     

聚甲基丙烯酸甲酯包覆(CH3NH3)PbBr3纳米晶静电纺丝膜的制备及对氨气的荧光传感

采用原位合成法制备了聚甲基丙烯酸甲酯包覆MAPbBr₃纳米晶(MAPbBr₃@PMMA,MA=甲铵离子)静电纺丝膜。当氨气(NH₃)通入MAPbBr₃@PMMA纤维膜时与MAPbBr₃中的MA发生取代,能显著降低MAPbBr₃@PMMA纤维的荧光强度,以此构建了基于MAPbBr₃@PMMA纤维荧光猝灭的NH₃传感器。通过扫描电镜、透射电镜、粉末X射线衍射和红外对静电纺丝膜的形貌和结构进行表征,通过紫外可见光谱、荧光光谱对其光学特性进行表征。结果表明,传感器的荧光强度与NH₃浓度在8~90 mg·L^-1之间呈现出良好的线性关系(r=0.995 9),NH₃的检出限低(3 mg·L^-1),且具有良好的重现性和选择性。在实际样品气体的测定中,加标回收率为92.2%~102.1%,相对标准偏差(RSD)为1.8%~3.2%。     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Near‐Infrared Emission from Tin–Lead (Sn–Pb) Alloyed Perovskite Quantum Dots by Sodium Doping

Phase‐stable CsSn_xPb_1?xI₃ perovskite quantum dots (QDs) hold great promise for optoelectronic applications owing to their strong response in the near‐infrared region. Unfortunately, optimal utilization of their potential is limited by the severe photoluminescence (PL) quenching, leading to extremely low quantum yields (QYs) of approximately 0.3 %. The ultra‐low sodium (Na) doping presented herein is found to be effective in improving PL QYs of these alloyed QDs without alerting their favourable electronic structure. X‐ray photoelectron spectroscopy (XPS) studies suggest the formation of a stronger chemical interaction between I^? and Sn²⁺ ions upon Na doping, which potentially helps to stabilize Sn²⁺ and suppresses the formation of I vacancy defects. The optimized PL QY of the Na‐doped QDs reaches up to around 28 %, almost two orders of magnitude enhancement compared with the pristine one.     

聚甲基丙烯酸甲酯包覆(CH3NH3) PbBr3纳米晶静电纺丝膜的制备及对氨气的荧光传感

采用原位合成法制备了聚甲基丙烯酸甲酯包覆MAPbBr₃纳米晶（MAPbBr₃@PMMA,MA=甲铵离子）静电纺丝膜。当氨气（NH₃）通入MAPbBr₃@PMMA纤维膜时与MAPbBr₃中的MA发生取代,能显著降低MAPbBr₃@PMMA纤维的荧光强度,以此构建了基于MAPbBr₃@PMMA纤维荧光猝灭的NH₃传感器。通过扫描电镜、透射电镜、粉末X射线衍射和红外对静电纺丝膜的形貌和结构进行表征,通过紫外可见光谱、荧光光谱对其光学特性进行表征。结果表明,传感器的荧光强度与NH₃浓度在8~90 mg·L^-1之间呈现出良好的线性关系（r=0.995 9）,NH₃的检出限低（3 mg·L^-1）,且具有良好的重现性和选择性。在实际样品气体的测定中,加标回收率为92.2%~102.1%,相对标准偏差（RSD）为1.8%~3.2%。     

Self‐Assembled Amphiphilic Water Oxidation Catalysts: Control of O−O Bond Formation Pathways by Different Aggregation Patterns

The oxidation of water to molecular oxygen is the key step to realize water splitting from both biological and chemical perspective. In an effort to understand how water oxidation occurs on a molecular level, a large number of molecular catalysts have been synthesized to find an easy access to higher oxidation states as well as their capacity to make O?O bond. However, most of them function in a mixture of organic solvent and water and the O?O bond formation pathway is still a subject of intense debate. Herein, we design the first amphiphilic Ru‐bda (H₂bda=2,2′‐bipyridine‐6,6′‐dicarboxylic acid) water oxidation catalysts (WOCs) of formula [Ru^II(bda)(4‐OTEG‐pyridine)₂] ( 1 , OTEG=OCH₂CH₂OCH₂CH₂OCH₃) and [Ru^II(bda)(PySO₃Na)₂] ( 2 , PySO₃^?=pyridine‐3‐sulfonate), which possess good solubility in water. Dynamic light scattering (DLS), scanning electron microscope (SEM), critical aggregation concentration (CAC) experiments and product analysis demonstrate that they enable to self‐assemble in water and form the O?O bond through different routes even though they have the same bda^2? backbone. This work illustrates for the first time that the O?O bond formation pathway can be regulated by the interaction of ancillary ligands at supramolecular level.