Syringe‐to‐syringe dispersive liquid‐phase microextraction solidified floating organic drop combined with high‐performance liquid chromatography for the separation and quantification of ochratoxin A in food samples

A new, simple, and rapid syringe‐to‐syringe dispersive liquid‐phase microextraction with solidified floating organic drop was used for the separation and preconcentration of ochratoxin A from grain and juice samples before its quantification using high‐performance liquid chromatography and fluorescence detection. Factors influencing the microextraction efficiency of ochratoxin A, such as sample solution pH, type and volume of organic extractant, salt concentration, number of injections, and volume of the sample, were studied and optimized. Under the optimum properties, the calibration graph showed linearity in the range of 65.0–700.0 ng/L (coefficient of determination = 0.9991). The limit of detection was 20.0 ng/L. The inter‐day and intra‐day relative standard deviations were in the range of 5.0–8.5%. This method was successfully applied for the quantification of ochratoxin A in grain and juice samples.     

Flotation/ultrasound‐assisted microextraction followed by HPLC for determination of fat‐soluble vitamins in multivitamin pharmaceutical preparations

Dissolved carbon dioxide flotation–emulsification microextraction technique coupled with high‐performance liquid chromatography was developed for separation and determination of fat‐soluble vitamins (A, D₃, E, and K₃) in multivitamin pharmaceutical preparations. Dissolved carbon dioxide flotation was used to break up the emulsion of extraction solvent in water and to collect the extraction solvent on the surface of aqueous sample in narrowed capillary part of extraction cell. Carbon dioxide bubbles were generated in situ through the addition of 300 μL of concentrated hydrochloric acid into the alkaline sample solution at pH = 11.5 (1% w/v sodium carbonate), which was sonicated to intensify the carbon dioxide bubble generation. Several factors affecting the extraction process were optimized. Under the optimal conditions, the limits of detection were 0.11, 0.47, 0.20 and 0.35 μg/L for A, E, D₃, and K₃ vitamins in water samples, respectively. The inter‐day and intra‐day precision of the proposed method were evaluated in terms of the relative standard deviation and were <10.5%.     

Ionic‐liquid‐based dispersive liquid–liquid microextraction for high‐throughput multiple food contaminant screening

This paper describes an innovation of dispersive liquid–liquid microextraction enabling multiple‐component analysis of eight high‐priority food contaminants in two chemically distinctive families: Sudan dyes and phthalate plasticizers. To provide convenient sample handling for solid and solid‐containing matrices, a modified dispersive liquid–liquid microextraction procedure used an extractant precoated frit to perform simultaneous filtration, solvent mixing, and phase dispersion in one simple step. A binary ionic liquid extractant system was carefully tuned to deliver high quality analysis based only on affordable LC with diode array detector instrumentation. The method is comprehensively validated for robust quantification with good precision (6.9–9.8% RSD) in a linear 2–1000 μg/L range. Having accomplished enrichment factors up to 451, the treatment enables sensitive detection at 0.09–1.01 μg/L levels. Analysis of six high‐risk solid condiments and sauces further verified its practical applicability within a 70–120% recovery range. Compared to other approaches, the current dispersive liquid–liquid microextraction treatment offers major advantages in terms of minimal solvent (1.5 mL) and sample (0.1 g) consumption, ultra‐high analytical throughput (6 min), and the ability to handle complex solid matrices. The idea of performing simultaneous analysis for multiple contaminants presented here fosters a more effective mode of operation in food control routines.     

Dispersive liquid–liquid microextraction based on amine‐functionalized Fe3O4 nanoparticles for the determination of phenolic acids in vegetable oils by high‐performance liquid chromatography with UV detection

A novel dispersive liquid–liquid microextraction method based on amine‐functionalized Fe₃O₄ magnetic nanoparticles was developed for the determination of six phenolic acids in vegetable oils by high‐performance liquid chromatography. Amine‐functionalized Fe₃O₄ was synthesized by a one‐pot solvothermal reaction between Fe₃O₄ and 1,6‐hexanediamine and characterized by transmission electron microscopy and Fourier transform infrared spectrophotometry. A trace amount of phosphate buffer solution (extractant) was adsorbed on bare Fe₃O₄‐NH₂ nanoparticles by hydrophilic interaction to form the “magnetic extractant”. Rapid extraction could be achieved while the “magnetic extractant” on amine‐functionalized Fe₃O₄ nanoparticles was dispersed in the sample solution by vortexing. After extraction, the “magnetic extractant” was collected by application of an external magnet. Some important parameters, such as pH and volume of extraction and desorption solvents, the extraction and desorption time needed were carefully investigated and optimized to achieve the best extraction efficiency. Under the optimal conditions, satisfactory extraction recoveries were obtained for the six phenolic acids in the range of 84.2–106.3%. Relative standard deviations for intra‐ and inter‐day precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied for the determination of six phenolic acids in eight kinds of vegetable oils.     

Pipette vial dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography for the determination of benzoylurea insecticide in fruit juice

A simple, sensitive, and efficient method of using a pipette vial to perform dispersive liquid–liquid microextraction based on the solidification of floating organic droplets was coupled with high‐performance liquid chromatography (HPLC) and a diode array detector for the preconcentration and analysis of four benzoylurea insecticides in fruit juice. In this method, 1‐dodecanol was used as an extractant, and a snipped pipette was used as an experimental vial to simplify the procedure of collecting and separating solidified extractant. The experimental parameters were optimized using a Plackett–Burman design and one‐factor‐at‐a‐time method. Under the optimal conditions in the water model, the limits of detection for analytes varied from 0.03 to 0.28 μg/L, and the enrichment factors ranged from 147 to 206. Linearity was achieved for diflubenzuron and flufenoxuron in a range of 0.5–500 μg/L, for hexaflumuron in a range of 1–500 μg/L, and for triflumuron in a range of 5–500 μg/L. The correlation coefficients for the analytes ranged from 0.9986 to 0.9994 with recoveries of 91.4–110.9%. Finally, the developed technique was successfully applied to fruit juice samples with acceptable results. The relative standard deviations of the analytes at two spiking levels (50 and 200 μg/L) varied between 0.2 and 4.5%.     

Preconcentration and analysis of Rhodamine B in water and red wine samples by using magnesium hydroxide/carbon nanotube composites as a solid‐phase extractant

A convenient and accurate analysis approach that combined solid‐phase extraction and high‐performance liquid chromatography was developed to determine the amount of Rhodamine B in red wine and Xiang‐jiang river water samples. A novel composite, magnesium hydroxide/carbon nanotube composites, was synthesized and used as the solid‐phase extractant for the preconcentration/analysis of Rhodamine B. Magnesium hydroxide/carbon nanotube composites, which combined the merits of carbon nanotubes and magnesium hydroxide, exhibited acceptable adsorption and desorption efficiencies for Rhodamine B. The linear range of the proposed solid‐phase extraction with high‐performance liquid chromatography method for Rhodamine B was 0.05–20.0 mg/L, with a limit of detection of 3.6 μg/L. The precision and reproducibility of the developed solid‐phase extraction with high‐performance liquid chromatography method and the batch‐to‐batch reproducibility of the solid‐phase extractant were also validated at spiking levels of 0.5 and 2.0 mg/L. The recovery of Rhodamine B was 94.33–106.7%, and the recovery relative standard deviations of the intra‐ and interday precisions were ≤ 3.83 and ≤ 6.01%, respectively. The relative standard deviation of the batch‐to‐batch reproducibility was ≤ 7.98%.     

Three‐phase hollow fiber liquid‐phase microextraction combined with HPLC for determination of three trace acidic plant growth regulators in Anoectochilus roxburghii (Wall.) Lindl

The analysis of plant growth regulators presents a challenge due to their trace quantities and complex matrices. A novel, simple, and effective analytical method for the determination of three trace acidic plant growth regulators in Anoectochilus roxburghii (Wall.) Lindl was developed to address this issue. Three‐phase hollow fiber liquid‐phase microextraction combined with high‐performance liquid chromatography was applied for the enrichment, purification, and determination of three acidic plant growth regulators, namely, indole‐3‐acetic‐acid, indole‐3‐butyric‐acid, and (+)‐abscisic acid. The factors affecting extraction performance, including extractant species, pH of donor and acceptor phases, salt addition dosage, extraction time, temperature, and stirring rate, were investigated and optimized. Under optimum conditions, the proposed method provided good linearity (R², 0.9994–0.9999), low limit of detection (0.038–0.12 ng/mL), and acceptable relative recoveries (56.7–117.6%). The enrichment factors were between 153 and 328. The developed method was successfully applied to the enrichment and determination of plant growth regulators in Anoectochilus roxburghii (Wall.) Lindl and exhibited increased purification capacity, higher sensitivity, and decreased organic solvent consumption compared with conventional sample preparation methods. This method may provide a testing platform for the monitoring of plant growth regulator residues, ensuring the safe and effective use of traditional Chinese medicine.     

Graphene‐based pipette tip solid‐phase extraction with ultra‐high performance liquid chromatography and tandem mass spectrometry for the analysis of carbamate pesticide residues in fruit juice

Graphene‐based pipette tip solid‐phase extraction was combined with ultra‐high performance liquid chromatography and tandem mass spectrometry for the determination of carbamate pesticide residues in fruit juice samples. Four milligrams of graphene was used as sorbent material to pack a 1000 μL pipette tip for the extraction of pirimicarb, propoxur, isoprocarb, fenobucarb, and diethofencarb from 3 mL of fruit juice sample. The whole extraction process was finished in 12 min, and the volume of eluent used was only 1.5 mL. Under the optimized conditions, good linear relationship (R > 0.999) and lower limits of detection (0.0022–0.033 ng/mL) were achieved. The recoveries at three spiked levels ranged from 80.90 to 124.60% with relative standard deviations less than 4.88%. Compared with commercially available sorbents including propylsulfonic acid silica, graphitized carbon black, and C₁₈, graphene was superior in extraction efficiency. The proposed method is simple, rapid, sensitive, selective, and solvent saving.     

Ligandless,deep eutectic solvent‐based ultrasound‐assisted dispersive liquid‐liquid microextraction with solidification of the aqueous phase for preconcentration of lead,cadmium, cobalt and nickel in water samples

A green and efficient sample preparation method using a deep eutectic solvent‐based ultrasounds‐assisted dispersive liquid–liquid microextraction with solidification of the aqueous phase followed by high performance liquid chromatography analysis was developed for preconcentration and determination of heavy metals in environmental samples. In the proposed method, a novel, low density deep eutectic solvent was prepared by mixing trihexyl(tetradecyl)phosphonium chloride and thiosalicylic acid at a molar ratio of 1:2 and used both as an extractant and complexing agent. Ultrasound was used to disperse the extractant in the aqueous phase of the sample. Then, the phases were separated by centrifugation, after which the aqueous phase was frozen and the surface extractant phase was dissolved in a small volume of acetonitrile and subjected to liquid chromatographic analysis. The proposed method provided precisions (relative standard deviation, n = 5) in the range of 2.6–4.7%. The limit of detection were 0.05, 0.13, 0.06, and 0.11 µg/L for Pb(II), Cd(II), Co(II), Ni(II), respectively. The enhancement factors were equal to 154, 159, 162, and 158 for lead(II), cadmium(II), cobalt(II), and nickel(II), respectively. The accuracy of the proposed method was evaluated using certified reference materials (CA011b – hard drinking water, NIST 1643e – trace elements in water, TMRAIN‐04 – simulated rain sample).     

Ionic‐liquid‐based,manual‐shaking‐ and ultrasound‐assisted,surfactant‐enhanced emulsification microextraction for the determination of three fungicide residues in juice samples

A novel manual‐shaking‐ and ultrasound‐assisted surfactant‐enhanced emulsification microextraction method was developed for the determination of three fungicides in juice samples. In this method, the ionic liquid, 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, instead of a volatile organic solvent was used as the extraction solvent. The surfactant, NP‐10, was used as an emulsifier to enhance the dispersion of the water‐immiscible ionic liquid into an aqueous phase, which accelerated the mass transfer of the analytes. Organic dispersive solvent typically required in common dispersive liquid–liquid microextraction methods was not necessary. In addition, manual shaking for 15 s before ultrasound to preliminarily mix the extraction solvent and the aqueous sample could greatly shorten the time for dispersing the ionic liquid into aqueous solution by ultrasound irradiation. Several experimental parameters affecting the extraction efficiency, including type and volume of extraction solvent, type and concentration of surfactant, extraction time, and pH, were optimized. Under the optimized conditions, good linearity with the correlation coefficients (γ) higher than 0.9986 and high sensitivity with the limit of detection ranging from 0.4 to 1.6 μg/L were obtained. The average recoveries ranged from 61.4 to 86.0% for spiked juice, with relative standard deviations from 1.8 to 9.7%. The proposed method was demonstrated to be a simple, fast, and efficient method for the analysis of the target fungicides in juice samples.     

Magnetic solid‐phase extraction based on a polydopamine‐coated Fe3O4 nanoparticles absorbent for the determination of bisphenol A,tetrabromobisphenol A, 2,4,6‐tribromophenol,and (S)‐1,1’‐bi‐2‐naphthol in environmental waters by HPLC

Polydopamine‐coated Fe₃O₄ magnetic nanoparticles synthesized through a facile solvothermal reaction and the self‐polymerization of dopamine have been employed as a magnetic solid‐phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)‐1,1′‐bi‐2‐naphthol and 2,4,6‐tribromophenol, from environmental waters followed by high‐performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine‐coated Fe₃O₄ sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0–112.0% with relative standard deviations of 0.8–7.7%, indicating the good reliability of the magnetic solid‐phase extraction with high‐performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine‐coated Fe₃O₄ nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π–π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine‐coated Fe₃O₄ in water, among which hydrophobic interaction dominates the magnetic solid‐phase extraction performance.     

Ultrasound‐assisted,hybrid ionic liquid,dispersive liquid–liquid microextraction for the determination of insecticides in fruit juices based on partition coefficients

An ultrasound‐assisted, hybrid ionic liquid, dispersive liquid–liquid microextraction method coupled to high‐performance liquid chromatography with a variable‐wavelength detector was developed to detect ten insecticides, including diflubenzuron, triflumuron, hexaflumuron, flufenoxuron, lufenuron, diafenthiuron, transfluthrin, fenpropathrin, γ‐cyhalothrin and deltamethrin, in fruit juices. In this method, an appropriate extraction solvent was chosen based on the partition coefficient of the target compounds. A mixture of 1‐octyl‐2,3‐dimethylimidazolium bis(trifluoromethylsulfonyl)imide and 1‐hexyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was used as the extractant. The extraction efficiency was screened using Plackett–Burman design and optimized using central composite design. Under the optimal conditions, good linearity was obtained for all the analytes in the pure water model and the fruit juice samples. In pure water, the recoveries of the ten insecticides ranged from 85.7 to 108.9%, with relative standard deviations for one day ranging from 1.24 to 2.64%. The limits of detection were in the range of 0.19–0.69 μg/L, and the enrichment factors were in the range of 123–160. The logarithm of the n‐octanol/water partition coefficient in this experiment is a useful reference to select a suitable extraction solvent, and the proposed technique was applied for the analysis of ten insecticides in fruit juice with satisfactory results.     

In‐vitro Aluminum Determination and Preconcentration in Blood of Dialysis Patients Based on Ionic Liquid Dispersive Liquid‐Liquid Biomicroextraction by 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic Acid

In this study, trace amounts of aluminum in serum of dialysis patients were chelated with 2‐Amino‐3‐(1H‐imidazol‐4‐yl)propanoic acid (Histidine) and determined by electro‐thermal atomic absorption spectrometry (ETAAS). A fast and efficient method based on ionic liquid dispersive liquid‐liquid bio‐micro‐extraction (IL‐DLLBME) was developed for the determination of Al cation in human blood serum samples. In this work, a small amount of 1‐Hexyl‐3‐methylimmidazolum hexafluorophosphate ([HMIM] [PF₆]) as an extractant solvent was dissolved in acetone as a dispersant solvent and then the binary solution was rapidly injected by a syringe into the serum containing Al³⁺,Which have already in‐vitro chelated by Histidine amino acid (Al‐His) at pH = 6.5. After separation, the settled IL‐phase was dissolved in ethanol up to 200 μL and 20 μL of samples injected into the ET‐AAS by auto‐sampler. Various parameters have been studied and optimized for 10 mL of sample. Under the optimum conditions, the enrichment factor (EF), limit of detection (LOD) and working range (peak area mode) were obtained 53, 15 ng L^?1 and 0.05‐4.1 μg L^?1 respectively. In vitro Al chelation showed that His can significantly decrease aluminum concentration in serum of dialysis patients. Validation of methodology was confirmed by standard reference material (SRM).     

Porous carbon derived from a metal–organic framework as an efficient adsorbent for the solid‐phase extraction of phthalate esters

A porous carbon designated as MOF‐5‐C was prepared by directly carbonizing a metal–organic framework (MOF‐5). The morphology and microstructure of MOF‐5‐C were characterized by scanning electron microscopy, N₂ adsorption, and powder X‐ray diffraction. The MOF‐5‐C retained the original porous structures of MOF‐5, and showed a high Brunauer–Emmett–Teller surface area (1808 m² g^?1) and large pore volume (3.05 cm³ g^?1). To evaluate its adsorption performance, the MOF‐5‐C was used as an adsorbent for the solid‐phase extraction of four phthalate esters from bottled water, peach juice, and soft drink samples followed by high‐performance liquid chromatographic analysis. Several parameters that could affect the extraction efficiencies were investigated. Under the optimum conditions, a good linearity was achieved in the concentration range of 0.1–50.0 ng mL^?1 for bottled water sample and 0.2–50.0 ng mL^?1 for peach juice and soft drink samples. The limits of detection of the method (S/N = 3) were 0.02 ng mL^?1 for bottled water sample, and 0.04–0.05 ng mL^?1 for peach juice and soft drink samples. The results indicated that the MOF‐5‐C exhibited an excellent adsorption capability for trace levels of phthalate esters, and it could be a promising adsorbent for the preconcentration of other organic compounds.     

Determination of triazine herbicides in juice samples by microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction coupled with high‐performance liquid chromatography

A novel microextraction method, termed microwave‐assisted ionic liquid/ionic liquid dispersive liquid–liquid microextraction, has been developed for the rapid enrichment and analysis of triazine herbicides in fruit juice samples by high‐performance liquid chromatography. Instead of using hazardous organic solvents, two kinds of ionic liquids, a hydrophobic ionic liquid (1‐hexyl‐3‐methylimidazolium hexafluorophosphate) and a hydrophilic ionic liquid (1‐butyl‐3‐methylimidazolium tetrafluoroborate), were used as the extraction solvent and dispersion agent, respectively, in this method. The extraction procedure was induced by the formation of cloudy solution, which was composed of fine drops of 1‐hexyl‐3‐methylimidazolium hexafluorophosphate dispersed entirely into sample solution with the help of 1‐butyl‐3‐methylimidazolium tetrafluoroborate. In addition, an ion‐pairing agent (NH₄PF₆) was introduced to improve recoveries of the ionic liquid phase. Several experimental parameters that might affect the extraction efficiency were investigated. Under the optimum experimental conditions, the linearity for determining the analytes was in the range of 5.00–250.00 μg/L, with the correlation coefficients of 0.9982–0.9997. The practical application of this effective and green method is demonstrated by the successful analysis of triazine herbicides in four juice samples, with satisfactory recoveries (76.7–105.7%) and relative standard deviations (lower than 6.6%). In general, this method is fast, effective, and robust to determine triazine herbicides in juice samples.     

Ultrasound‐assisted supramolecular‐solvent‐based microextraction combined with high‐performance liquid chromatography for the analysis of chlorophenols in environmental water samples

An efficient, inexpensive and environmentally benign ultrasound‐assisted supramolecular‐solvent‐based microextraction technique combined with high‐performance liquid chromatography was used for the determination of chlorophenols in environmental water samples. Different factors such as amount of decanoic acid, volume of tetrahydrofuran, pH of the sample, ultrasound time and ionic strength were investigated and optimized. The optimized extraction conditions were 60 mg decanoic acid, 1.5 mL tetrahydrofuran, 3 min ultrasound time, without salt addition. Under this condition, the extraction recoveries were 83.0–89.3 with preconcentration factors of 94–102. The calibration curves were linear from 5.0–400.0 ng/mL with square of the correlation coefficient higher than 0.9998 and the limits of detection were between 1.5–2.0 ng/mL. The values of intra‐ and inter‐day relative standard deviations were 3.2–6.0 and 7.3–8.0%, respectively. Analysis of different samples showed that the concentration of 2,5‐dichlorophenol in Babolrood river water was 80.6 ng/mL.     

Dispersive Liquid‐Liquid Microextraction Followed by HPLC‐DAD as an Efficient and Sensitive Technique for the Determination of Patulin from Apple Juice and Concentrate Samples

A simple and sensitive method based on dispersive liquid‐liquid microextraction (DLLME) in conjunction with high performance liquid chromatography‐diode array detection (HPLC‐DAD) has been developed for the quantitative analysis of patulin in apple juice and concentrate samples. The effect of extraction and disperser solvent (nature and volume), pH of sample solution, extraction time and extraction temperature was investigated. Under the optimal conditions the linear dynamic range of patulin was from 8.0 to 40.0 μg L^‐1 with a correlation coefficient of 0.9993 and a detection limit of 4.0 μg L^‐1. The relative standard deviation (RSD) was less than 5.9% (n = 5) and the recovery values were in the range of 94‐97%. Finally the proposed method was successfully applied for the analysis of patulin in apple juice and concentrate samples.     

Determination of three estrogens and bisphenol A by functional ionic liquid dispersive liquid‐phase microextraction coupled with ultra‐high performance liquid chromatography and ultraviolet detection

A hydroxyl‐functionalized ionic liquid, 1‐hydroxyethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide, was employed in an improved dispersive liquid‐phase microextraction method coupled with ultra high performance liquid chromatography for the enrichment and determination of three estrogens and bisphenol A in environmental water samples. The introduced hydroxyl group acted as the H‐bond acceptor that dispersed the ionic liquid effectively in the aqueous phase without dispersive solvent or external force. Fourier transform infrared spectroscopy indicated that the hydroxyl group of the cation of the ionic liquid enhanced the combination of extractant and analytes through the formation of hydrogen bonds. The improvement of the extraction efficiency compared with that with the use of alkyl ionic liquid was proved by a comparison study. The main parameters including volume of extractant, temperature, pH, and extraction time were investigated. The calibration curves were linear in the range of 5.0–1000 μg/L for estrone, estradiol, and bisphenol A, and 10.0–1000 μg/L for estriol. The detection limits were in the range of 1.7–3.4 μg/L. The extraction efficiency was evaluated by enrichment factor that were between 85 and 129. The proposed method was proved to be simple, low cost, and environmentally friendly for the determination of the four endocrine disruptors in environmental water samples.     

Fe3O4/reduced graphene oxide‐carbon nanotubes composite for the magnetic solid‐phase extraction and HPLC determination of sulfonamides in milk

A novel magnetic adsorbent Fe₃O₄/reduced graphene oxide‐carbon nanotubes, was prepared by one‐pot solvothermal synthesis method. It was characterized by scanning electron microscopy, X‐ray powder diffraction and vibrating sample magnetometry. The diameter of Fe₃O₄ microparticles was about 350 nm, which were covered by carbon nanotubes and reduced graphene oxide sheets, while carbon nanotubes inserted between the reduced graphene oxide sheets effectively prevented their aggregation. The composite had large surface area and good magnetic property, suiting for magnetic solid‐phase extraction and the determination of sulfonamides, by coupling with high‐performance liquid chromatography. Under the optimized conditions (including extraction time, amount of adsorbent, solution pH, ionic strength and desorption conditions), a good linear was achieved in the concentration range of 5–500 μg/L and the low limits of detection and low limits of quantification were 0.35–1.32 and 1.16–4.40 μg/L, respectively. The enrichment factors were estimated to be 24.72 to 30.15 fold. The proposed method was applied for the detection of sulfonamides in milk sample and the recoveries were 88.4–105.9%, with relative standard deviations of 0.74–5.38%.     

Chromatographic behavior of small organic compounds in low‐temperature high‐performance liquid chromatography using liquid carbon dioxide as the mobile phase

Low‐temperature high‐performance liquid chromatography, in which a loop injector, column, and detection cell were refrigerated at –35ºC, using liquid carbon dioxide as the mobile phase was developed. Small organic compounds (polyaromatic hydrocarbons, alkylbenzenes, and quinones) were separated by low‐temperature high‐performance liquid chromatography at temperatures from –35 to –5ºC. The combination of liquid carbon dioxide mobile phase with an octadecyl‐silica (C₁₈) column provided reversed phase mode separation, and a bare silica‐gel column resulted in normal phase mode separation. In both the cases, nonlinear behavior at approximately –15ºC was found in the relationship between the temperature and the retention factors of the analytes (van't Hoff plots). In contrast to general trends in high‐performance liquid chromatography, the decrease in temperature enhanced the separation efficiency of both the columns.