Direct Monitoring of Cell Membrane Vesiculation with 2D AuNP@MnO2 Nanosheet Supraparticles at the Single‐Particle Level

We herein demonstrate robust two‐dimensional (2D) UFO‐shaped plasmonic supraparticles made of gold nanoparticles (AuNPs) and MnO₂ nanosheets (denoted as AMNS‐SPs) for directly monitoring cell membrane vesiculation at the single‐particle level. Because the decorated MnO₂ nanosheets are ultrathin (4.2 nm) and have large diameters (230 nm), they are flexible enough for deformation and folding for parceling of the AuNPs during the endocytosis process. Correspondingly, the surrounding refractive index of the AuNPs increases dramatically, which results in a distinct red‐shift of the localized surface plasmon resonance (LSPR). Such LSPR modulation provides a convenient and accurate means for directly monitoring the dynamic interactions between 2D nanomaterials and cell membranes. Furthermore, for the endocytosed AMNS‐SPs, the subsequent LSPR blue‐shift induced by etching effects of reducing molecules is promising for exploring the local environment redox states at the single‐cell level.     

Size Dependence of Doping by a Vacancy Formation Reaction in Copper Sulfide Nanocrystals

Doping of nanocrystals (NCs) is a key, yet underexplored, approach for tuning of the electronic properties of semiconductors. An important route for doping of NCs is by vacancy formation. The size and concentration dependence of doping was studied in copper(I) sulfide (Cu₂S) NCs through a redox reaction with iodine molecules (I₂), which formed vacancies accompanied by a localized surface plasmon response. X‐ray spectroscopy and diffraction reveal transformation from Cu₂S to Cu‐depleted phases, along with CuI formation. Greater reaction efficiency was observed for larger NCs. This behavior is attributed to interplay of the vacancy formation energy, which decreases for smaller sized NCs, and the growth of CuI on the NC surface, which is favored on well‐defined facets of larger NCs. This doping process allows tuning of the plasmonic properties of a semiconductor across a wide range of plasmonic frequencies by varying the size of NCs and the concentration of iodine. Controlled vacancy doping of NCs may be used to tune and tailor semiconductors for use in optoelectronic applications.     

Direct Conversion of Bulk Metals to Size‐Tailored,Monodisperse Spherical Non‐Coinage‐Metal Nanocrystals

Monodisperse non‐noble metal nanocrystals (NCs) that are highly uniform in shapes and particle size are much desired in various advanced applications, and are commonly prepared by either thermal decomposition or reduction, where reactive organometallic precursors or/and strong reducing agents are mandatory; however, these are usually toxic, costly, or suffer a lack of availability. Bulk Group 12 metals can now be converted into ligand‐protected, highly crystalline, monodisperse spherical metal NCs with precisely controlled sizes without using any precursors and reducers. The method is based on low‐power NIR‐laser‐induced size‐selective layer‐by‐layer surface vaporization. The monodisperse Cd NCs show pronounced deep‐UV (DUV) localized surface plasmon resonance making them highly competitive DUV‐plasmonic materials. This approach will promote appreciably the emergence of a wide range of monodisperse technically important non‐coinage metal NCs with compelling functionalities.     

Direct Conversion of Bulk Metals to Size‐Tailored,Monodisperse Spherical Non‐Coinage‐Metal Nanocrystals

Monodisperse non‐noble metal nanocrystals (NCs) that are highly uniform in shapes and particle size are much desired in various advanced applications, and are commonly prepared by either thermal decomposition or reduction, where reactive organometallic precursors or/and strong reducing agents are mandatory; however, these are usually toxic, costly, or suffer a lack of availability. Bulk Group 12 metals can now be converted into ligand‐protected, highly crystalline, monodisperse spherical metal NCs with precisely controlled sizes without using any precursors and reducers. The method is based on low‐power NIR‐laser‐induced size‐selective layer‐by‐layer surface vaporization. The monodisperse Cd NCs show pronounced deep‐UV (DUV) localized surface plasmon resonance making them highly competitive DUV‐plasmonic materials. This approach will promote appreciably the emergence of a wide range of monodisperse technically important non‐coinage metal NCs with compelling functionalities.     

CO2‐Assisted Fabrication of Two‐Dimensional Amorphous Molybdenum Oxide Nanosheets for Enhanced Plasmon Resonances

As a remarkable class of plasmonic materials, two dimensional (2D) semiconductor compounds have attracted attention owing to their controlled manipulation of plasmon resonances in the visible light spectrum, which outperforms conventional noble metals. However, tuning of plasmonic resonances for 2D semiconductors remains challenging. Herein, we design a novel method to obtain amorphous molybdenum oxide (MoO₃) nanosheets, in which it combines the oxidation of MoS₂ and subsequent supercritical CO₂‐treatment, which is a crucial step for the achievement of amorphous structure of MoO₃. Upon illumination, hydrogen‐doped MoO₃ exhibits tuned surface plasmon resonances in the visible and near‐IR regions. Moreover, a unique behavior of the amorphous MoO₃ nanosheets has been found in an optical biosensing system; there is an optimum plasmon resonance after incubation with different BSA concentrations, suggesting a tunable plasmonic device in the near future.     

Remarkable SERS Activity Observed from Amorphous ZnO Nanocages

Enhancement of the semiconductor–molecule interaction, in particular, promoting the interfacial charge transfer process (ICTP), is key to improving the sensitivity of semiconductor‐based surface enhanced Raman scattering (SERS). Herein, by developing amorphous ZnO nanocages (a‐ZnO NCs), we successfully obtained an ultrahigh enhancement factor of up to 6.62×10⁵. This remarkable SERS sensitivity can be attributed to high‐efficiency ICTP within a‐ZnO NC molecule system, which is caused by metastable electronic states of a‐ZnO NCs. First‐principles density functional theory (DFT) simulations further confirmed a stronger ICTP in a‐ZnO NCs than in their crystalline counterparts. The efficient ICTP can even generate π bonding in Zn−S bonds peculiar to the mercapto molecule adsorbed a‐ZnO NCs, which has been verified through the X‐ray absorption near‐edge structure (XANES) characterization. To the best of our knowledge, this is the first time such remarkable SERS activity has been observed within amorphous semiconductor nanomaterials, which could open a new frontier for developing highly sensitive and stable SERS technology.     

Colloidal Synthesis and Charge‐Carrier Dynamics of Cs2AgSb1−yBiyX6 (X: Br,Cl; 0 ≤y ≤1) Double Perovskite Nanocrystals

A series of lead‐free double perovskite nanocrystals (NCs) Cs₂AgSb_1?yBi_yX₆ (X: Br, Cl; 0≤y≤1) is synthesized. In particular, the Cs₂AgSbBr₆ NCs is a new double perovskite material that has not been reported for the bulk form. Mixed Ag–Sb/Bi NCs exhibit enhanced stability in colloidal solution compared to Ag–Bi or Ag–Sb NCs. Femtosecond transient absorption studies indicate the presence of two prominent fast trapping processes in the charge‐carrier relaxation. The two fast trapping processes are dominated by intrinsic self‐trapping (ca. 1–2 ps) arising from giant exciton–phonon coupling and surface‐defect trapping (ca. 50–100 ps). Slow hot‐carrier relaxation is observed at high pump fluence, and the possible mechanisms for the slow hot‐carrier relaxation are also discussed.     

Immunoassay of plasmonic gold‐nanoparticle clusters: Plasmon coupling effects for Parkinson biomarker detection

A simple signal‐on plasmonic optical assay for the detection of the Parkinson biomarker using gold‐nanoparticle clusters (AuNCs) for signal amplification is presented. This approach is based on the improvement of the optical density (OD) change of the plasmonic band of a localized surface plasmon resonance (LSPR) Au nanoparticle (AuNP) sensor interface using Au NCs conjugated antibodies. The amplification results in a 260‐fold improvement in concentration detection, from 1,000 ng/mL (unlabeled antibody) to 3.8 ng/mL (antibody‐conjugated AuNCs). The sensitivity enhancement can be ascribed to the further plasmonic coupling between the antibody‐conjugated AuNCs and the AuNPs on the LSPR interface and the enhanced amount of target molecule bound to the bioassay. This AuNCs‐assisted signal amplification strategy allows for improving the sensitivity of the plasmon‐based bioassays and can be extended to other optical‐based diagnostic technologies. Importantly, the simple detecting procedure and protocol assembly make it competitive with other existing sensing technologies such as ELISA, allowing for practical usage in clinical diagnostics.     

Plasmonic Nanocavities Enable Self‐Induced Electrostatic Catalysis

The potential of strong interactions between light and matter remains to be further explored within a chemical context. Towards this end herein we study the electromagnetic interaction between molecules and plasmonic nanocavities. By means of electronic structure calculations, we show that self‐induced catalysis emerges without any external stimuli through the interaction of the molecular permanent and fluctuating dipole moments with the plasmonic cavity modes. We also exploit this scheme to modify the transition temperature T_1/2 of spin‐crossover complexes as an example of how strong light–matter interactions can ultimately be used to control a materials responses.     

Plasmonic Nickel–TiO2 Heterostructures for Visible‐Light‐Driven Photochemical Reactions

Plasmon‐mediated carrier transfer (PMCT) at metal–semiconductor heterojunctions has been extensively exploited to drive photochemical reactions, offering intriguing opportunities for solar photocatalysis. However, to date, most studies have been conducted using noble metals. Inexpensive materials capable of generating and transferring hot carriers for photocatalysis via PMCT have been rarely explored. Here, we demonstrate that the plasmon excitation of nickel induces the transfer of both hot electrons and holes from Ni to TiO₂ in a rationally designed Ni–TiO₂ heterostructure. Furthermore, it is discovered that the transferred hot electrons either occupy oxygen vacancies (V_O) or produce Ti³⁺ on TiO₂, while the transferred hot holes are located on surface oxygens at TiO₂. Moreover, the transferred hot electrons are identified to play a primary role in driving the degradation of methylene blue (MB). Taken together, our results validate Ni as a promising low‐cost plasmonic material for prompting visible‐light photochemical reactions.     

Dry Sintering Meets Wet Silver‐Ion “Soldering”: Charge‐Transfer Plasmon Engineering of Solution‐Assembled Gold Nanodimers From Visible to Near‐Infrared I and II Regions

Achieving highly tunable and localized surface plasmon resonance up to near infrared (NIR) regions is a key target in nanoplasmonics. In particular, a self‐assembly process capable of producing highly uniform and solution‐processable nanomaterials with tailor‐made plasmonic properties is lacking. We herein address this problem through a conjunctive use of wet Ag⁺ soldering and dry thermal sintering to produce nanodimer‐derived structures with precisely engineered charge‐transfer plasmon (CTP). The sintered dimers are water soluble, featuring gradually shifted CTP spanning an 800 nm wavelength range (up to NIR II). Upon silica removal, the products are grafted by DNA to offer surface functionality. This process is also adaptable to DNA‐linked AuNP dimers toward plasmonic meta‐materials via DNA‐guided soldering and sintering.     

Mechanistic Studies of Plasmon Chemistry on Metal Catalysts

Chemical reactions induced by the localized surface plasmon (LSP) of metal nanostructures could be important for a sustainable society to achieve highly efficient conversion from solar energy to chemical energy. However, the reaction mechanism of plasmon chemistry in metal catalysis is still controversial. Mechanistic studies of plasmon chemistry involving direct interactions between the LSP and molecules are reviewed and discussed in terms of the excitation mechanisms of the molecules. We focus on the studies performed using plasmonic metal nanoparticles and highlight the recent progress in plasmon chemistry investigated using scanning probe microscopy with high spatial resolution to obtain mechanistic insights that cannot be obtained by macroscopic analytical methods. This Minireview delivers an overview of the mechanistic understanding of plasmon chemistry in metal catalysis at the current stage, and provides guidance for future studies with respect to clarifying reaction mechanisms.     

The Fundamentals of Real‐Time Surface Plasmon Resonance/Electrogenerated Chemiluminescence

We report the integration of surface plasmon resonance (SPR), cyclic voltammetry and electrochemiluminescence (ECL) responses to survey the interfacial adsorption and energy transfer processes involved in ECL on a plasmonic substrate. It was observed that a Tween 80/tripropylamine nonionic layer formed on the gold electrode of the SPR sensor, while enhancing the ECL emission process, affects the electron transfer process to the luminophore, Ru(bpy)₃²⁺, which in turn has an impact on the plasmon resonance. Concomitantly, the surface plasmon modulated the ECL intensity, which decreased by about 40 %, due to an interaction between the excited state of Ru(bpy)₃²⁺ and the plasmon. This occurred only when the plasmon was excited, demonstrating that the optically excited surface plasmon leads to lower plasmon‐mediated luminescence and that the plasmon interacts with the excited state of Ru(bpy)₃²⁺ within a very thin layer.     

Interband Absorption Enhanced Optical Activity in Discrete Au@Ag Core–Shell Nanocuboids: Probing Extended Helical Conformation of Chemisorbed Cysteine Molecules

Detailed understanding of the interaction between a chiral molecule and a noble metal surface is essential to rationalize and advance interfacial self‐assembly of amino acids and metal‐mediated anchoring of proteins. Here we demonstrate that individual Au@Ag core–shell nanocuboids can serve as a plasmonic reporter of an extended helical network formed among chemisorbed cysteine molecules, through generating an interband absorption enhanced, Ag‐surface‐exclusive circular dichroism (CD) band in the UV region. The observed unusual, strong CD response in the hybrid Au@Ag–cysteine system can be used to probe in real time conformational evolution and structural rearrangement of biomolecules in general and also monitor the interfacial interaction between a metal surface and an adsorbed molecule, opening up the possibility of using Ag nanostructures as promising stereochemically attuned nanosensors.     

Space‐Confined Seeded Growth of Cu Nanorods with Strong Surface Plasmon Resonance for Photothermal Actuation

Herein, we show that copper nanostructures, if made anisotropic, can exhibit strong surface plasmon resonance comparable to that of gold and silver counterparts in the near‐infrared spectrum. Further, we demonstrate that a robust confined seeded growth strategy allows the production of high‐quality samples with excellent control over their size, morphology, and plasmon resonance frequency. As an example, copper nanorods (CuNRs) are successfully grown in a limited space of preformed rod‐shaped polymer nanocapsules, thereby avoiding the complex nucleation kinetics involved in the conventional synthesis. The method is unique in that it enables the flexible control and fine‐tuning of the aspect ratio and the plasmonic resonance. We also show the high efficiency and stability of the as‐synthesized CuNRs in photothermal conversion and demonstrate their incorporation into nanocomposite polymer films that can be used as active components for constructing light‐responsive actuators and microrobots.     

Boosting Electrocatalytic Hydrogen Evolution over Metal–Organic Frameworks by Plasmon‐Induced Hot‐Electron Injection

Efficient hydrogen evolution via electrocatalytic water splitting holds great promise in modern energy devices. Herein, we demonstrate that the localized surface plasmon resonance (LSPR) excitation of Au nanorods (NRs) dramatically improves the electrocatalytic hydrogen evolution activity of CoFe‐metal–organic framework nanosheets (CoFe‐MOFNs), leading to a more than 4‐fold increase of current density at ?0.236 V (vs. RHE) for Au/CoFe‐MOFNs composite under light irradiation versus in dark. Mechanistic investigations reveal that the hydrogen evolution enhancement can be largely attributed to the injection of hot electrons from AuNRs to CoFe‐MOFNs, raising the Fermi level of CoFe‐MOFNs, facilitating the reduction of H₂O and affording decreased activation energy for HER. This study highlights the superiority of plasmonic excitation on improving electrocatalytic efficiency of MOFs and provides a novel avenue towards the design of highly efficient water‐splitting systems under light irradiation.     

MicroRNA‐Directed Intracellular Self‐Assembly of Chiral Nanorod Dimers

MicroRNAs (miRNAs), a kind of single‐stranded small RNA molecules, play a crucial role in physiological and pathological processes in human beings. We describe here the detection of miRNA, by side‐by‐side self‐assembly of plasmonic nanorod dimers in living cells, which gives rise to a distinct intense chiroplasmonic response and surface‐enhanced Raman scattering (SERS). The dynamic assembly of chiral nanorods was confirmed by fluorescence resonance energy transfer (FRET), also in living cells. Our study provides insights into in situ self‐assembly of plasmonic probes for the real‐time measurement of biomarkers in living cells. This could improve the current understanding of cellular RNA–protein complexes, pharmaco‐genomics, and genetic diagnosis and therapies.     

Defect‐Directed Growth of Symmetrically Branched Metal Nanocrystals

Branched plasmonic nanocrystals (NCs) have attracted much attention due to electric field enhancements at their tips. Seeded growth provides routes to NCs with defined branching patterns and, in turn, near‐field distributions with defined symmetries. Here, a systematic analysis was undertaken in which seeds containing different distributions of planar defects were used to grow branched NCs in order to understand how their distributions direct the branching. Characterization of the products by multimode electron tomography and analysis of the NC morphologies at different overgrowth stages indicate that the branching patterns are directed by the seed defects, with the emergence of branches from the seed faces consistent with minimizing volumetric strain energy at the expense of surface energy. These results contrast with growth of branched NCs from single‐crystalline seeds and provide a new platform for the synthesis of symmetrically branched plasmonic NCs.     

Coupling between molecular and plasmonic resonances in freestanding dye-gold nanorod hybrid nanostructures

Hybrid nanostructures of organic dyes and inorganic gold nanorods are constructed using the layer-by-layer assembly method via electrostatic interactions. Strong coupling is observed between the molecular resonance of dyes and the plasmonic resonance of gold nanorods when their spectra overlap strongly. The coupling strength is tuned by choosing gold nanorods with longitudinal plasmon wavelengths varying from 570 to 870 nm. The resonance coupling-induced plasmon shift is found to be strongly dependent on the dye concentration and the spacing between the dye and nanorod. Moreover, the resonance coupling can be switched off by laser illumination to decompose adsorbed dyes. We believe this is the first time that the coupling between molecular and plasmonic resonances is observed for freestanding hybrid nanostructures constructed out of dyes and colloidal gold nanorods. These results will be helpful in understanding the fundamental interactions between molecular and plasmonic resonances and useful for the design of resonance coupling-based chemical and biological sensors.     

Disclosing Interfaces of ZnO Nanocrystals Using Dynamic Nuclear Polarization: Sol‐Gel versus Organometallic Approach

The unambiguous characterization of the coordination chemistry of nanocrystal surfaces produced by wet‐chemical synthesis presently remains highly challenging. Here, zinc oxide nanocrystals (ZnO NCs) coated by monoanionic diphenyl phosphate (DPP) ligands were derived by a sol‐gel process and a one‐pot self‐supporting organometallic (OSSOM) procedure. Atomic‐scale characterization through dynamic nuclear polarization (DNP‐)enhanced solid‐state NMR (ssNMR) spectroscopy has notably enabled resolving their vastly different surface‐ligand interfaces. For the OSSOM‐derived NCs, DPP moieties form stable and strongly‐anchored μ₂‐ and μ₃‐bridging‐ligand pairs that are resistant to competitive ligand exchange. The sol‐gel‐derived NCs contain a wide variety of coordination modes of DPP ligands and a ligand exchange process takes place between DPP and glycerol molecules. This highlights the power of DNP‐enhanced ssNMR for detailed NC surface analysis and of the OSSOM approach for the preparation of ZnO NCs.