Molecular and Spectroscopic Characterization of Green and Red Cyanine Fluorophores from the Alexa Fluor and AF Series**

The use of fluorescence techniques has an enormous impact on various research fields including imaging, biochemical assays, DNA-sequencing and medical technologies. This has been facilitated by the development of numerous commercial dyes with optimized photophysical and chemical properties. Often, however, information about the chemical structures of dyes and the attached linkers used for bioconjugation remain a well-kept secret. This can lead to problems for research applications where knowledge of the dye structure is necessary to predict or understand (unwanted) dye-target interactions, or to establish structural models of the dye-target complex. Using a combination of optical spectroscopy, mass spectrometry, NMR spectroscopy and molecular dynamics simulations, we here investigate the molecular structures and spectroscopic properties of dyes from the Alexa Fluor (Alexa Fluor 555 and 647) and AF series (AF555, AF647, AFD647). Based on available data and published structures of the AF and Cy dyes, we propose a structure for Alexa Fluor 555 and refine that of AF555. We also resolve conflicting reports on the linker composition of Alexa Fluor 647 maleimide. We also conducted a comprehensive comparison between Alexa Fluor and AF dyes by continuous-wave absorption and emission spectroscopy, quantum yield determination, fluorescence lifetime and anisotropy spectroscopy of free and protein-attached dyes. All these data support the idea that Alexa Fluor and AF dyes have a cyanine core and are a derivative of Cy3 and Cy5. In addition, we compared Alexa Fluor 555 and Alexa Fluor 647 to their structural homologs AF555 and AF(D)647 in single-molecule FRET applications. Both pairs showed excellent performance in solution-based smFRET experiments using alternating laser excitation. Minor differences in apparent dye-protein interactions were investigated by molecular dynamics simulations. Our findings clearly demonstrate that the AF-fluorophores are an attractive alternative to Alexa- and Cy-dyes in smFRET studies or other fluorescence applications.     

Measurements of FRET in a glucose-sensitive affinity system with frequency-domain lifetime spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A–dextran affinity system using frequency‐domain lifetime spectroscopy. A dextran (MW 2000000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar‐binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET‐quenching kinetics of the donor were analyzed from frequency‐domain measurements as a function of both glucose and acceptor‐protein concentrations using a Förster‐type decay kinetics model. The results show that the frequency‐domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 μM dextran to labeled concanavalin A at a solution concentration of 10.67 μM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.     

Spectral imaging of single molecules by transmission grating-based epi-fluorescence microscopy

A spectral imaging method of single protein molecules labeled with a single fluorophore is presented. The method is based on a transmission grating and a routine fluorescence microscope. The bovine serum alubmin (BSA) and antiBSA molecules labeled with Alexa Fluor 488 and Alexa Fluor 594, respectively, are used as the model proteins. The fluorescence of single molecules is dispersed into zeroth-order spectrum and first-order spectrum by the transmission grating. Results show that the fluorescence emission spectrum of single molecule converted from the first-order spectral imaging is in good agreement with the bulk fluorescence spectrum. The spectral resolution of 2.4 nm/pixel is obtained, which is sufficient for identifying the molecular species in a multicomponent system.     

An Ultra‐High Fluorescence Enhancement and High Throughput Assay for Revealing Expression and Internalization of Chemokine Receptor CXCR4

Revealing chemokine receptor CXCR4 expression, distribution, and internalization levels in different cancers helps to evaluate cancer progression or prognosis and to set personalized treatment strategy. We here describe a sensitive and high‐throughput immunoassay for determining CXCR4 expression and distribution in cancer cells. The assay is accessible to a wide range of users in an ordinary lab only by dip‐coating poly(styrene‐co‐N‐isopropylacrylamide) spheres on the glass substrate. The self‐ assembled spheres form three‐dimensional photonic colloidal crystals which enhance the fluorescence of CF647 and Alexa Fluor 647 by a factor of up to 1000. CXCR4 in cells is detected by using the sandwich immunoassay, where the primary antibody recognizes CXCR4 and the secondary antibody is labeled with CF647. With the newly established assay, we quantified the total expression of CXCR4, its distribution on the cell membrane and cytoplasm, and revealed their internalization level upon SDF‐1α activation in various cancer cells, even for those with extremely low expression level.     

Comparative microRNA detection from precursor-microRNA-transfected hepatocellular carcinoma cells by capillary electrophoresis with dual-color laser-induced fluorescence

A dual-LIF (dLIF) setup combined with CE for microRNA (miRNA) detection is proposed in this study. An argon ion laser (488 nm) and a solid state laser (640 nm) were chosen to excite the fluorescent dye-labeled DNA probe after splinted ligation of miRNA. The crosstalk of emission spectrum of Alex Fluor 488 and Alex Fluor 647 is minimized with a zero crosstalk matrix for Alex Fluor 647 to 488 channels. The linear ranges of the device for the fluorescent dye-labeled DNA probe were both from 1.0 nM to 0.1 pM. The limits of detection for Alexa Fluor 488-labeled DNA and Alex Fluor 647-labeled DNA were 9.3 and 31 fM, respectively. The detection of specific miRNA has been accomplished by combining splinted ligation with the fluorescent dye-labeled oligonucleotides. The linear range for the synthetic miRNA is from 1.0 nM to 1.0 pM. Without PCR amplification, CE-dLIF was applied to discriminate a pre-miR-10b*-transfected cells (contains precursor miR-10b*) from hepatocellular carcinoma cell (control cells). Therefore, this result indicates CE-dLIF has great potential to provide a rapid comparative assay for miRNAs detection.     

Binding of single nucleotides to H+-ATP synthases observed by fluorescence resonance energy transfer

F(0)F(1)-ATP synthases couple proton translocation with the synthesis of ATP from ADP and phosphate. The enzyme has three catalytic nucleotide binding sites, one on each beta-subunit; three non-catalytic binding sites are located mainly on each alpha-subunit. In order to observe substrate binding to the enzyme, the H(+)-ATP synthase from Escherichia coli was labelled selectively with the fluorescence donor tetramethylrhodamine (TMR) at position T106C of the gamma-subunit. The labelled enzymes were incorporated into liposomes and catalysed proton-driven ATP synthesis. The substrate ATP-Alexa Fluor 647 was used as the fluorescence acceptor to perform intermolecular fluorescence resonance energy transfer (FRET). Single molecules are detected with a confocal set-up. When one ATP-Alexa Fluor 647 binds to the enzyme, FRET can be observed. Five stable states with different intermolecular FRET efficiencies were distinguished for enzyme-bound ATP-Alexa Fluor 647 indicating binding to different binding sites. Consecutive hydrolysis of excess ATP resulted in stepwise changes of the FRET efficiency. Thereby, gamma-subunit movement during catalysis was directly monitored with respect to the binding site with bound ATP-Alexa Fluor 647.     

Electron transfer reaction in a single protein molecule observed by total internal reflection fluorescence microscopy

To observe an electron transfer (ET) process in a single protein molecule, we constructed a model system, Alexa-HCytb5, in which cytochrome b5 (Cytb5) is modified with a fluorescent probe, Alexa Fluor 647 dye. In this model system, intramolecular transfer of an electron from the Alexa dye to heme in Cytb5 is supposed to oxidize the probe and quench its fluorescence, and the ET reaction at the single-molecule level can be monitored as the intermittent change in the fluorescence intensity. Alexa-HCytb5 was fixed on the glass surface, and illumination of laser light by the total internal reflection resulted in blinking of the fluorescence from the single Alexa-HCytb5 molecule in the time scale of several hundred milliseconds. Each Alexa-HCytb5 molecule is characterized by its own rate constant of the blinking, corresponding to the ET rate constant at the single-molecule level, and its variation ranges between 1 and 10 s(-1). The current system thus enables us to visualize the ET reaction in the single protein molecule, and the protein ET reaction was found to be explained by the distribution of the rate constants. On the basis of the Marcus theory, we suggest that the origin of this rate distribution is the distance change associated with the structural fluctuation in the protein molecule.     

Mechanisms and advancement of antifading agents for fluorescence microscopy and single-molecule spectroscopy

Modern fluorescence microscopy applications go along with increasing demands for the employed fluorescent dyes. In this work, we compared antifading formulae utilizing a recently developed reducing and oxidizing system (ROXS) with commercial antifading agents. To systematically test fluorophore performance in fluorescence imaging of biological samples, we carried out photobleaching experiments using fixed cells labeled with various commonly used organic dyes, such as Alexa 488, Alexa 594, Alexa 647, Cy3B, ATTO 550, and ATTO 647N. Quantitative evaluation of (i) photostability, (ii) brightness, and (iii) storage stability of fluorophores in samples mounted in different antifades (AFs) reveal optimal combinations of dyes and AFs. Based on these results we provide guidance on which AF should preferably be used with a specific dye. Finally, we studied the antifading mechanisms of the commercial AFs using single-molecule spectroscopy and reveal that these empirically selected AFs exhibit similar properties to ROXS AFs.     

Analysis of immunoarrays using a gold grating-based dual mode surface plasmon-coupled emission (SPCE) sensor chip

We have developed a novel dual mode immunoassay platform that combines the advantages of real-time, label free measurement of surface plasmon resonance (SPR) and the highly directional surface plasmon-coupled emission (SPCE) using a gold grating-based sensor chip. Since only fluorophore-labeled analyte molecules that are close to the metal surface of the sensor chip will couple to the surface plasmon, SPCE detection is highly surface-specific leading to background suppression and increased sensitivity. Theoretical calculations were done to find SPR and SPCE angles for a sensor chip optimized for Alexa Fluor 647. We have confirmed the SPR and SPCE responses on the dual mode sensor chip using Alexa Fluor 647 labeled anti-mouse IgG. Signal fluctuation of the dual mode sensor chip reader was below 1.2% and 0.8% for SPR and SPCE, respectively. The SPR response in this configuration showed a minimum detection level of 1 μg ml(-1), and the SPCE response showed a minimum detection level of 1 ng ml(-1) for the same sample. A range of human IgG concentrations in human serum was also analyzed with the dual mode sensor chip. The SPCE measurement is more sensitive than the SPR real-time measurement, and substantially extends the dynamic range of the assay platform, as well as enabling independent measurements of co-localized analytes on the same sensor chip region of interest. Since this assay platform is capable of measuring more than 1000 spatially encoded regions of interest on a 1 cm(2) sensor chip, it has the potential for high-content analyses of biological samples with both research and clinical applications.     

Enhanced fluorescence images for labeled cells on silver island films

Silver island films (SIFs) were deposited on glass substrates to serve as supports. T-Lymphocytic (PM1) cell lines were labeled by Alexa Fluor 680-dextran conjugates on the membranes or by YOYO in the nuclei. The fluorescence images of the cell lines were recorded in the emission intensity and lifetime using scanning confocal microscopy. The fluorescence signals by the fluorophores bound on the cell membranes were enhanced significantly by SIF supports as compared with those on the glass. In addition to the increase in the intensity, there was a dramatic shortening of the emission lifetime. In contrast to the Alexa Fluor 680 fluorophores on the membranes, the YOYO fluorophores intercalated in the cell nuclei were not influenced significantly by the silver islands. This result can be interpreted by an effect of the distance on coupling between the fluorophores and metal particles: the fluorophores on the cell membranes are localized within, but the fluorophores in the cell nuclei are beyond the region of metal-enhanced fluorescence. Thus, the metal supports can be used to improve the detection sensitivity for target molecules on cell surfaces when they are fluorescently labeled.     

Cytochrome c‐Capped Fluorescent Gold Nanoclusters: Imaging of Live Cells and Delivery of Cytochrome c

Cytochrome c‐capped fluorescent gold nanoclusters (Au‐NCs) are used for imaging of live lung and breast cells. Delivery of cytochrome c inside the cells is confirmed by covalently attaching a fluorophore (Alexa Fluor 594) to cytochrome c‐capped Au‐NCs and observing fluorescence from Alexa 594 inside the cell. Mass spectrometry studies suggest that in bulk water, addition of glutathione (GSH) to cytochrome c‐capped Au‐NCs results in the formation of glutathione‐capped Au‐NCs and free apo‐cytochrome c. Thus glutathione displaces cytochrome c as a capping agent. Using confocal microscopy, the emission spectra and decay of Au‐NCs are measured in live cells. From the position of the emission maximum it is shown that the Au‐NCs exist as Au₈ in bulk water and as Au₁₃ inside the cells. Fluorescence resonance energy transfer from cytochrome c–Au‐NC (donor) to Mitotracker Orange (acceptor) indicates that the Au‐NCs localise in the mitochondria of live cells.     

Multicolor super-resolution fluorescence imaging via multi-parameter fluorophore detection

Understanding the complexity of the cellular environment will benefit from the ability to unambiguously resolve multiple cellular components, simultaneously and with nanometer-scale spatial resolution. Multicolor super-resolution fluorescence microscopy techniques have been developed to achieve this goal, yet challenges remain in terms of the number of targets that can be simultaneously imaged and the crosstalk between color channels. Herein, we demonstrate multicolor stochastic optical reconstruction microscopy (STORM) based on a multi-parameter detection strategy, which uses both the fluorescence activation wavelength and the emission color to discriminate between photo-activatable fluorescent probes. First, we obtained two-color super-resolution images using the near-infrared cyanine dye Alexa 750 in conjunction with a red cyanine dye Alexa 647, and quantified color crosstalk levels and image registration accuracy. Combinatorial pairing of these two switchable dyes with fluorophores which enhance photo-activation enabled multi-parameter detection of six different probes. Using this approach, we obtained six-color super-resolution fluorescence images of a model sample. The combination of multiple fluorescence detection parameters for improved fluorophore discrimination promises to substantially enhance our ability to visualize multiple cellular targets with sub-diffraction-limit resolution.     

Pulsed fluorescence measurements of trapped molecular ions with zero background detection

Sensitive methods have been developed to measure laser-induced fluorescence from trapped ions by reducing the detection of background scattering to zero levels during the laser excitation pulse. The laser beam diameter has been reduced to approximately 150 microm to eliminate scattering on trap apertures and the resulting laser-ion interaction is limited to a volume of approximately 10(-5) cm which is approximately 0.03-0.15 of the total ion cloud volume depending on experimental conditions. The detection optics collected fluorescence only from within the solid angle defined by laser-ion interaction volume. Rhodamine 640 and Alexa Fluor 350 ions, commonly used as fluorescence resonance energy transfer (FRET) fluorophores, were generated in the gas phase by using electrospray ionization and injected into a radiofrequency Paul trap where they were stored and exposed to Nd:YAG laser pulses at 532 and 355 nm for times up to 10 m. Fluorescence emitted by these ions was investigated for several trap q(z) values and ion cloud temperatures. Analysis of photon statistics indicated an average of approximately 10 photons were incident on the PMT detector per 15 ns pulse for approximately 10(3) trapped ions in the interaction volume. Fluorescence measurements displayed a dependence on trapped ion number which were consistent with calculations of the space charge limited ion density. To investigate the quantitative capability of these fluorescence techniques, the laser-induced fragmentation of trapped Alexa Fluor 350 ions was measured and compared with a rate equation model of the dynamics. Decay of the fluorescence signal as well as the parent ion number compared closely with quantitative predictions of the photofragmentation model.     

The Number of Accumulated Photons and the Quality of Stimulated Emission Depletion Lifetime Images

Time binning is used to increase the number of photon counts in the peak channel of stimulated emission depletion fluorescence lifetime decay curves to determine how it affects the resulting lifetime image. The fluorescence lifetime of the fluorophore, Alexa Fluor 594 phalloidin, bound to F‐actin is probed in cultured S2 cells at a spatial resolution of ~40 nm. This corresponds to a 10‐fold smaller probe volume compared to confocal imaging, and a reduced number of photons contributing to the signal. Pixel‐by‐pixel fluorescence lifetime measurements and error analysis show that an average of 40 ± 30 photon counts in the peak channel with a signal‐to‐noise ratio of 20 is enough to calculate a reliable fluorescence lifetime from a single exponential fluorescence decay. No heterogeneity in the actin cytoskeleton in different regions of the cultured cells was measured in the 40–400 nm spatial regime.     

Interaction of albumin with polysaccharides containing ionic groups

It is very important to clarify the mechanisms of the interaction between components of organisms. In this report, the interaction between bovine serum albumin (BSA) and ionic polysaccharides were discussed. The fluorescence spectrum of tryptophan (Trp) in BSA changed as its conformation changed. On adding polysaccharide containing sulfonic acid residues (sulfonic‐type) at pH 7.4, a remarkable blue shift of the emission maximum (λ_em) of Trp was observed. This blue shift was decreased by adding NaCl. In contrast, polysaccharide containing carboxylic acid residues (carboxy‐type) scarcely changed Trp fluorescence at the same pH. At a pH lower than the isoelectric point (PI = 4.7–4.9) of BSA, a remarkable blue shift was observed not only by adding sulfonic‐type polysaccharide but also by adding carboxy‐type polysaccharide. Moreover, using the energy transfer method, in the pH region higher than the PI of BSA, carboxylic‐type polysaccharides may interact relatively weakly with the binding site II of BSA, but sulfonic‐type ones can selectively interact with binding site I weakly and with binding site II strongly. And in the pH region lower than the PI of BSA, carboxylic‐type polysaccharides interact with binding site II strongly. On the other hand, sulfonic‐type polysaccharides are bound to both binding site I and binding site II very strongly. Copyright © 1999 John Wiley & Sons, Ltd.     

Bioconjugation of protein-repellent zwitterionic polymer brushes grafted from silicon nitride

A new method for attaching antibodies to protein-repellent zwitterionic polymer brushes aimed at recognizing microorganisms while preventing the nonspecific adsorption of proteins is presented. The poly(sulfobetaine methacrylate) (SBMA) brushes were grafted from α-bromo isobutyryl initiator-functionalized silicon nitride (Si(x)N(4), x ≥ 3) surfaces via controlled atom-transfer radical polymerization (ATRP). A trifunctional tris(2-aminoethyl)amine linker was reacted with the terminal alkylbromide of polySBMA chains. N-Hydroxysuccinimide (NHS) functionalization was achieved by reacting the resultant amine-terminated polySBMA brush with bifunctional suberic acid bis(N-hydroxysuccinimide ester). Anti-Salmonella antibodies were subsequently immobilized onto polySBMA-grafted Si(x)N(4) surfaces through these NHS linkers. The protein-repellent properties of the polySBMA-grafted surface after antibody attachment were evaluated by exposing the surfaces to Alexa Fluor 488-labeled fibrinogen (FIB) solution (0.1 g·L(-1)) for 1 h at room temperature. Confocal laser scanning microscopy (CLSM) images revealed the minimal adsorption of FIB onto the antibody-coated polySBMA in comparison with that of antibody-coated epoxide monolayers and also bare Si(x)N(4) surfaces. Subsequently, the interaction of antibodies immobilized onto polySBMA with SYTO9-stained Salmonella solution without using blocking solution was examined by CLSM. The fluorescent images showed that antibody-coated polySBMA efficiently captured Salmonella with only low background noise as compared to antibody-coated monolayers lacking the polymer brush. Finally, the antibody-coated polySBMA surfaces were exposed to a mixture of Alexa Fluor 647-labeled FIB and Salmonella without the prior use of a blocking solution to evaluate the ability of the surfaces to capture bacteria while simultaneously repelling proteins. The fluorescent images showed the capture of Salmonella with no adsorption of FIB as compared to antibody-coated epoxide surfaces, demonstrating the potential of the zwitterionic layer in preventing the nonspecific adsorption of the proteins during the detection of bacteria in complex matrices.     

Efficacious Anticancer Drug Delivery Mediated by a pH‐Sensitive Self‐Assembly of a Conserved Tripeptide Derived from Tyrosine Kinase NGF Receptor

We present herein a short tripeptide sequence (Lys–Phe–Gly or KFG) that is situated in the juxtamembrane region of the tyrosine kinase nerve growth factor (Trk NGF) receptors. KFG self‐assembles in water and shows a reversible and concentration‐dependent switching of nanostructures from nanospheres (vesicles) to nanotubes, as evidenced by dynamic light scattering, transmission electron microscopy, and atomic force microscopy. The morphology change was associated with a transition in the secondary structure. The tripeptide vesicles have inner aqueous compartments and are stable at pH 7.4 but rupture rapidly at pH≈6. The pH‐sensitive response of the vesicles was exploited for the delivery of a chemotherapeutic anticancer drug, doxorubicin, which resulted in enhanced cytotoxicity for both drug‐sensitive and drug‐resistant cells. Efficient intracellular release of the drug was confirmed by fluorescence‐activated cell sorting analysis, fluorescence microscopy, and confocal microscopy.     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

On-chip multiplexed solid-phase nucleic acid hybridization assay using spatial profiles of immobilized quantum dots and fluorescence resonance energy transfer

A microfluidic based solid-phase assay for the multiplexed detection of nucleic acid hybridization using quantum dot (QD) mediated fluorescence resonance energy transfer (FRET) is described herein. The glass surface of hybrid glass-polydimethylsiloxane (PDMS) microfluidic channels was chemically modified to assemble the biorecognition interface. Multiplexing was demonstrated using a detection system that was comprised of two colors of immobilized semi-conductor QDs and two different oligonucleotide probe sequences. Green-emitting and red-emitting QDs were paired with Cy3 and Alexa Fluor 647 (A647) labeled oligonucleotides, respectively. The QDs served as energy donors for the transduction of dye labeled oligonucleotide targets. The in-channel assembly of the biorecognition interface and the subsequent introduction of oligonucleotide targets was accomplished within minutes using a combination of electroosmotic flow and electrophoretic force. The concurrent quantification of femtomole quantities of two target sequences was possible by measuring the spatial coverage of FRET sensitized emission along the length of the channel. In previous reports, multiplexed QD-FRET hybridization assays that employed a ratiometric method for quantification had challenges associated with lower analytical sensitivity arising from both donor and acceptor dilution that resulted in reduced energy transfer pathways as compared to single-color hybridization assays. Herein, a spatial method for quantification that is based on in-channel QD-FRET profiles provided higher analytical sensitivity in the multiplexed assay format as compared to single-color hybridization assays. The selectivity of the multiplexed hybridization assays was demonstrated by discrimination between a fully-complementary sequence and a 3 base pair sequence at a contrast ratio of 8 to 1.     

A Macrocyclic Fluorophore Dimer with Flexible Linkers: Bright Excimer Emission with a Long Fluorescence Lifetime

Bright fluorescent molecules with long fluorescence lifetimes are important for the development of lifetime‐based fluorescence imaging techniques. Herein, a molecular design is described for simultaneously attaining long fluorescence lifetime (τ) and high brightness (Φ_F×?) in a system that features macrocyclic dimerization of fluorescent π‐conjugated skeletons with flexible linkers. An alkylene‐linked macrocyclic dimer of bis(thienylethynyl)anthracene was found to show excimer emission with a long fluorescence lifetime (τ≈19 ns) in solution, while maintaining high brightness. A comparison with various relevant derivatives revealed that the macrocyclic structure and the length of the alkylene chains play crucial roles in attaining these properties. In vitro time‐gated imaging experiments were conducted as a proof‐of‐principle for the superiority of this macrocyclic fluorophore relative to the commercial fluorescent dye Alexa Fluor 488.