Simultaneous determination of ethyl carbamate and 4‐(5‐)methylimidazole in yellow rice wine and soy sauce by gas chromatography with mass spectrometry

We developed a new method, based on alkaline diatomite solid‐phase extraction followed by gas chromatography with mass spectrometry, for the simultaneous determination of the toxic contaminants ethyl carbamate (EC) and 4‐(5‐)methylimidazole (4‐MEI) in yellow rice wine and soy sauce. The optimal extraction conditions were defined. With the application of alkaline diatomite solid‐phase extraction, damage to the capillary column by organic acids was greatly reduced. With deuterated EC used as the internal standard, the linearity of the calibration curves for EC and 4‐MEI was good with correlation coefficient above 0.99. In a spiked experiment with EC and 4‐MEI in yellow rice wine and soy sauce, recovery of the added EC was 80.5–102.5% and that of 4‐MEI was 78.3–92.8%. The limit of quantification and limit of detection for EC were 6.0 and 2.0 μg/kg, respectively, and for 4‐MEI were 15.0 and 5.0 μg/kg, respectively. The validation results demonstrate that the method is fast, simple, and selective, and therefore is suitable for simultaneously determining the presence of EC and 4‐MEI in fermented food.     

Dispersive liquid–liquid microextraction with in situ derivatization coupled with gas chromatography and mass spectrometry for the determination of 4‐methylimidazole in red ginseng products containing caramel colors

A rapid analytical method was developed for the determination of 4‐methylimidazole from red ginseng products containing caramel colors by using dispersive liquid–liquid microextraction with in situ derivatization followed by gas chromatography with mass spectrometry. Chloroform and acetonitrile were selected as the extraction and dispersive solvents, and based on the extraction efficiency, their optimum volumes were 200 and 100 μL, respectively. The optimum volumes of the derivatizing agent (isobutyl chloroformate) and catalyst (pyridine), pH, and concentration of NaCl in the sample solution were determined to be 25 and 100 μL, pH 7.6, and 0% w/v, respectively. Validation of the optimized method showed good linearity (R² > 0.999), accuracy (≥89.86%), intra‐ (≤6.70%) and interday (≤4.17%) repeatability, limit of detection (0.96 μg/L), and limit of quantification (5.79 μg/L). The validated method was applied to quantify 4‐methylimidazole in red ginseng juices and concentrates, 4‐methylimidazole was only found in red ginseng juices containing caramel colorant (42.91–2863.4 μg/L) and detected in red ginseng concentrates containing >1% caramel colorant.     

HPLC determination of γ‐aminobutyric acid and its analogs in human serum using precolumn fluorescence labeling with 4‐(carbazole‐9‐yl)‐benzyl chloroformate

In this study, a simple analytical method for the determination of γ‐aminobutyric acid, gabapentin, and baclofen by using high‐performance liquid chromatography with fluorescence detection was developed. An amidogen‐reactive fluorescence labeling reagent, 4‐(carbazole‐9‐yl)‐benzyl chloroformate was first used to sensitively label these analytes. The completed labeling of these analytes can be finished rapidly only within 5 min at the room temperature (25°C) to form 4‐(carbazole‐9‐yl)‐benzyl chloroformate labeled fluorescence derivatives. These labeled derivatives expressed strong fluorescence property with the maximum excitation and emission wavelengths of 280 and 380 nm, respectively. The labeled derivatives were analyzed using a reversed‐phase Eclipse SB‐C18 column within 10 min with satisfactory shapes. Excellent linearity (R² > 0.995) for all analytes was achieved with the limits of detection and the limits of quantitation in the range of 0.25?0.35 and 0.70?1.10 μg/L, respectively. The proposed method was used for the simultaneous determination of γ‐aminobutyric acid and its analogs in human serum with satisfactory recoveries in the range of 94.5–97.5%.     

Development of a high‐throughput method based on thin‐film microextraction using a 96‐well plate system with a cork coating for the extraction of emerging contaminants in river water samples

In this study, a new method was developed in which a biosorbent material is used as the extractor phase in conjunction with a recently described sample preparation technique called thin‐film microextraction and a 96‐well plate system. The method was applied for the determination of emerging contaminants, such as 3‐(4‐methylbenzylidene) camphor, ethylparaben, triclocarban, and bisphenol A in water samples. The separation and detection of the analytes were performed by high‐performance liquid chromatography with diode array detection. These contaminants are considered hazardous to human health and other living beings. Thus, the development of an analytical method to determine these compounds is of great interest. The extraction parameters were evaluated using multivariate and univariate optimization techniques. The optimum conditions for the method were 3 h of extraction time, 20 min of desorption with 300 μL of acetonitrile and methanol (50:50, v/v), and the addition of 5% w/v sodium chloride to the sample. The analytical figures of merit showed good results with linear correlation coefficients higher than 0.99, relative recoveries of 72–125%, interday precision (n = 3) of 4–18%, and intraday precision (n = 9) of 1–21%. The limit of detection was 0.3–5.5 μg/L, and the limit of quantification was 0.8–15 μg/L.     

Synthesis and structure of complexes of phosphorus pentachloride with 4‐dimethylaminopyridine and n‐methylimidazole

Complexes of phosphorus pentachloride with 4‐dimethylaminopyridine and N‐methylimidazole were synthesized. The molecular structure of the phosphorus pentachloride complex with N‐methylimidazole was determined by single‐crystal X‐ray diffraction. In the cationic part of the complex, the phosphorus atom possesses four P Cl bonds within the range 2.109–2.148 Å and two cis‐P–N bonds (1.811 and 1.832 Å) with N‐methylimidazole and exhibits slightly distorted octahedral coordination with angles at phosphorus atom in the range 87.57°–91.50°. The relative stability of the cis and trans conformations of the complex was studied by DFT calculations. The chemical properties and reactivity of the compounds obtained are determined; their utility as condensing agents in the synthesis of amides from acids and amines was shown. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:171–177, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20392     

New Mixed‐Metal Carbonyl Complexes Containing Bridging 2‐Mercapto‐1‐methylimidazole Ligand

Reaction of [Mn₂(CO)₁₀] with 2‐mercapto‐1‐methylimidazole in the presence of Me₃NO at 25 °C afforded two new dimanganese complexes [Mn₂(CO)₆(μ‐SN₂C₄H₅)₂] ( 1 ) and [Mn₂(CO)₇(μ‐SN₂C₄H₅)₂] ( 2 ). Compound 1 consists of two μ‐SN₂C₄H₅ ligands, each bound through the sulfur atom to two Mn atoms and through the nitrogen atom to one Mn atom forming a four‐membered chelate ring. Compound 2 was found to consist of one μ‐SN₂C₄H₅ ligand in a similar bonding mode to 1 but another μ‐SN₂C₄H₅ ligand coordinates through the sulfur atom to one Mn atom and through the nitrogen atom to another Mn atom. Compound 1 was also obtained as the only product from the reaction of [Mn₂(CO)₈(NCMe)₂] with 2‐mercapto‐1‐methylimidazole. In contrast, a similar reaction of [Re₂(CO)₈(NCMe)₂] with 2‐mercapto‐1‐methylimidazole led to the formation of the di‐, tri‐, and tetranuclear complexes [Re₃(CO)₈(μ‐CO)(μ₃‐SN₂C₄H₅)₂(μ‐H)] ( 3 ), [Re₄(CO)₁₂(μ‐SN₂C₄H₅)₄] ( 4 ), and [Re₂(CO)₆(μ‐SN₂C₄H₅)₂] ( 5 ). Compound 3 provides a unique example of a hydrido trirhenium compound. The reaction of [Cr(CO)₃(NCMe)₃] and [Mo(CO)₃(NCMe)₃] with 1 in refluxing THF afforded the mixed metal complexes [CrMn₂(CO)₈(μ‐CO)₂(μ₃‐SN₂C₄H₅)₂] ( 6 ) and [MoMn₂(CO)₈(μ‐CO)₂(μ₃‐SN₂C₄H₅)₂] ( 7 ), respectively, in which two Mn–M (M = Mo, Cr) bonds were formed. In contrast, a similar treatment of [W(CO)₃(NCMe)₃] with 1 yielded two W‐Mn complexes [Mn₂W(CO)₈(μ‐CO)₂(μ₃‐SN₂C₄H₅)₂] ( 8 ) and [Mn₂W(CO)₇(μ‐CO)₂(SN₂C₄H₅)(μ₃‐SN₂C₄H₅)₂] ( 9 ). Treatment of 1 with [Fe₃(CO)₁₂] at 70‐75 °C afforded the trinuclear mixed‐metal complex [FeMn₂(CO)₈(μ‐CO)(μ₃‐SN₂C₄H₅)₂] ( 10 ) and the diiron side product [Fe₂(CO)₆(μ‐S₂N₂C₄H₅)₂] ( 11 ). Compounds 6 ‐ 10 have a bent open structure of three metal atoms linked by two metal‐metal bonds and all, except 9 and 10 , contain a noncrystallographic two‐fold axis of symmetry. Compound 9 is structurally similar to 8 , but it contains a SN₂C₄H₆ ligand, mono coordinated through the exocyclic sulfur atom to the W atom and a Mn–Mn bond instead of a Mn–W bond. Compound 11 comprises two bridging S₂N₂C₄H₅ ligands, which arise from the coupling of 2‐mercapto‐1‐methylimidazole with sulfur.     

New oil‐in‐salt liquid‐phase microextraction on permutite for the extraction and concentration of alkaloids in Coptis chinensis

A novel oil‐in‐salt liquid‐phase microextraction was developed and introduced for the extraction and concentration of the trace levels of active alkaloids in Coptis chinensis prior to being analyzed by high‐performance liquid chromatography with ultraviolet detection. Also, the oil‐in‐salt extraction mechanism was analyzed, the enrichment factor and extraction recovery were redefined, and the proposed method was compared with other methods. In the approach, the mixed solvent of pentanol/octanol (6:4, v/v) and NaCl (20% w/v) are immobilized on the permutite surface in turn to form oil‐in‐salt double membranes, through which the target analytes can be molecularized though salting‐out effect and be extracted by organic solvent. The main parameters affecting the approach were investigated and optimized. Under the optimized conditions, the enrichment factors of the analytes were 30–117, the linear ranges were 0.002–2 μg/mL for jatrorrhizine, coptisine, and palmatine, and 0.001–3 μg/mL for berberine (r ² ≥ 0.9923). The limits of detection were less than 1 ng/mL. Satisfactory recoveries (84.3%–120.3%) and precision (0.9%–7.5%) were also obtained. These results confirm that the approach is a simple and reliable sample pretreatment procedure and allows for the quantification of active alkaloids in C. chinensis at actual concentration levels.     

Miniaturized matrix solid‐phase dispersion coupled with supramolecular solvent‐based microextraction for the determination of paraben preservatives in cream samples

An analytical method is presented for the determination of paraben preservatives in semisolid cream samples by matrix solid‐phase dispersion combined with supramolecular solvent‐based microextraction. Due to the oily and sticky nature of the sample matrix, parabens were first extracted from the samples by matrix solid‐phase dispersion using silica as sorbent material with a clean‐up performed with tetrahydrofuran in the elution step. The eluate (500 μL), 1‐decanol (120 μL), and water (4.4 mL) were then mixed in a polyethylene pipette to form supramolecular solvent. Finally, the analytes in the supramolecular solvent were separated and determined by liquid chromatography with ultraviolet detection. Under optimal extraction conditions, the extraction recoveries of the studied compounds were obtained in the range of 63–83%. The limits of detection for the analytes were between 0.03 and 0.04 μg/g. The precision of the method varied between 4.0–6.7 (intraday) and 6.2–7.9% (interday). Finally, the optimized procedure was applied to the determination of the target preservatives in a variety of cream samples (diaper rash, skin allergy, face and hand moisturizing) with satisfactory recoveries (86–102%).     

Surfactant‐assisted dispersive liquid–liquid microextraction combined with field‐amplified sample stacking in capillary electrophoresis for the determination of mexiletine and lidocaine

A sensitive method for the determination of mexiletine and lidocaine using surfactant‐assisted dispersive liquid–liquid microextraction coupled with capillary electrophoresis was developed. Triton X‐100 and dichloromethane were used as the dispersive agent and extraction solvent, respectively. After the extraction, mexiletine and lidocaine were analyzed using capillary electrophoresis with ultraviolet detection. The detection sensitivity was further enhanced through the use of field‐amplified sample stacking. Under optimal extraction and stacking conditions, the calibration curves were linear over a concentration range of 0.05–1.00 μM for mexiletine and 0.03–1.00 μM for lidocaine. The limits of detection (signal‐to‐noise ratio of 3) were 0.01 and 0.01 μM for mexiletine and lidocaine, respectively. An approximately 1141‐ to 1250‐fold improvement in sensitivity was observed for the two analytes compared with the injection of a standard solution without the surfactant‐assisted dispersive liquid–liquid microextraction and field‐amplified sample stacking procedures. This developed method was successfully applied to the determination of mexiletine and lidocaine in human urine and serum samples. Both precision and accuracy for urine and serum samples were less than 8.7 and 6.7%, respectively. The recoveries of the two analytes from urine and serum samples were 54.7–64.9% and 16.1–56.5%, respectively.     

Simultaneous determination of morphine‐6‐d‐glucuronide,morphine‐3‐d‐glucuronide and morphine in human plasma and urine by ultra‐performance liquid chromatography–tandem mass spectrometry: Application to M6G injection pharmacokinetic study

A robust ultra‐performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method for the determination of morphine‐6‐d ‐glucuronide (M6G), morphine‐3‐d ‐glucuronide (M3G) and morphine (MOR) in human plasma and urine has been developed and validated. The analytes of interest were extracted from plasma by protein precipitation. The urine sample was prepared by dilution. Both plasma and urine samples were chromatographed on an Acquity UPLC HSS T₃ column using gradient elution. Detection was performed on a Xevo TQ‐S tandem mass spectrometer in multiple reaction monitoring mode using positive electrospray ionization. Matrix interferences were not observed at the retention time of the analytes and internal standard, naloxone‐D5. The lower limits of quantitation of plasma and urine were 2/0.5/0.5 and 20/4/2 ng/mL for M6G/M3G/MOR, respectively. Calibration curves were linear over the concentration ranges of 2–2000/0.5–500/0.5–500 and 20–20,000/4–4000/2–2000 ng/mL for M6G/M3G/MOR in plasma and urine samples, respectively. The precision was <7.14% and the accuracy was within 85–115%. Furthermore, stability of the analytes at various conditions, dilution integrity, extraction recovery and matrix effect were assessed. Finally, this quantitative method was successfully applied to the pharmacokinetic study of M6G injection in Chinese noncancer pain patients.     

Enantioselective and simultaneous determination of lactate and 3‐hydroxybutyrate in human plasma and urine using a narrow‐bore online two‐dimensional high‐performance liquid chromatography system

For the enantioselective and simultaneous analysis of lactate and 3‐hydroxybutyrate, a validated online two‐dimensional high‐performance liquid chromatography system using 4‐nitro‐7‐piperazino‐2,1,3‐benzoxadiazole as a fluorescent derivatization reagent has been developed. For the reversed‐phase separation in the first dimension, a Capcell Pak C18 ACR column (1.5 × 250 mm, particle size 3 μm) was used, and the target fractions were isolated by their hydrophobicity. In the second dimension, a polysaccharide‐coated enantioselective column, Chiralpak AD‐H (2.0 × 250 mm, 5 μm), was used. The system was validated by the calibration curve, intraday precision, interday precision, and accuracy using standards and real human samples, and satisfactory results were obtained. The present method was applied to human plasma and urine, and in the plasma, trace amounts of d‐ lactate (8.4 μM) and l‐ 3‐hydroxybutyrate (1.0 μM), besides high levels of l‐ lactate (860.9 μM) and d‐ 3‐hydroxybutyrate (59.4 μM), were successfully determined. In urine, trace levels of d‐ lactate (3.7 μM), d‐ 3‐hydroxybutyrate (2.3 μM), and l‐ 3‐hydroxybutyrate (3.3 μM) in addition to a relatively large amount of l‐ lactate (15.4 μM) were observed. The present online two‐dimensional high‐performance liquid chromatography system is useful for the simultaneous determination of all the lactate and 3‐hydroxybutyrate enantiomers in human physiological fluids, and further clinical applications are ongoing.     

Simultaneous determination of 4‐hydroxyphenyl lactic acid, 4‐hydroxyphenyl acetic acid,and 3,4‐hydroxyphenyl propionic acid in human urine by ultra‐high performance liquid chromatography with fluorescence detection

A simple and reliable method was established for simultaneous determination of 4‐hydroxyphenyl acetic acid, 4‐hydroxyphenyl lactic acid, and 3,4‐hydroxyphenyl propionic acid in human urine by high‐performance liquid chromatography with fluorescence detection. Solid‐phase extraction was used to eliminate the interferences in urine. The separation of three analytes was achieved using a C₁₈ column and a mobile phase formed by a 95:5 v/v mixture of 50 mmol/L ammonium acetate buffer at pH 6.8 that contained 5 mmol/L tetrabutyl ammonium bromide and acetonitrile. Under the optimized conditions, the detection limits of 4‐hydroxyphenyl acetic acid, 4‐hydroxyphenyl lactic acid, and 3,4‐hydroxyphenyl propionic acid were 4.8 × 10⁻³, 8.80 × 10⁻³, and 9.00 × 10⁻³ mg/L, respectively, and the recoveries were in the range of 85.0–120.0% with relative standard deviations of 1.5–3.1%. This method was used to analyze urine samples from breast cancer patients, healthy people and post‐surgery breast cancer patients. Significant differences in urinary levels of 4‐hydroxyphenyl acetic acid and 4‐hydroxyphenyl lactic acid could be found between the breast cancer patients group and other two groups. No effect of age and sex was observed on the urinary levels of 4‐hydroxyphenyl acetic acid and 4‐hydroxyphenyl lactic acid. This method might be helpful for cancer biomarkers discovery in urine.     

Fabrication of boron‐rich multiple monolithic fibers for the solid‐phase microextraction of carbamate pesticide residues in complex samples

To enrich carbamate pesticides from complex matrices, an adsorbent based on poly (vinylboronic anhydride pyridine complex‐co‐ethylenedimethacrylate) monolith was fabricated and utilized as the extraction phase of multiple monolithic fiber solid‐phase microextraction. Due to the abundant boron atoms in the monolith, the B–N coordination interaction between adsorbent and analytes play a key role in the efficient extraction of analytes. Under the optimized conditions, the monolithic fibers were combined with high‐performance liquid chromatography for the quantify trace levels of carbamate pesticides in environmental water and orange juice samples. For water sample, the limit of detection and limit of quantification were in the range of 0.017–0.29 and 0.057–0.96 μg/L, respectively. The related values in orange juice samples were 0.038–0.39 and 0.12–1.36 μg/kg, respectively. Besides, the proposed method also exhibits wide linearity, satisfactory coefficients of determination, and good precision. The introduced approach was successfully applied to determine trace target analytes in real‐life samples. The spiked recoveries with different fortified concentrations were in the range of 80.4–117% for water samples and 83.7–119% for fruit juice samples. The relative standard deviations were below 10%. The results evidence that the suggested method was convenient, reliable, and eco‐friendly for the monitoring of trace levels of carbamate pesticides in complex samples such as waters and juices.     

Graphene‐doped electrochemical copolymer coating of 2,2‐bithiophene and 3‐methylthiophene for the highly effective solid‐phase microextraction of volatile benzene homologues

We report the electrochemical fabrication of a poly(2,2‐bithiophene‐co‐3‐methylthiophene)‐graphene composite coating and its application in the headspace solid‐phase microextraction and gas chromatography determination of benzenes (i.e., bromobenzene, 4‐bromotoluene, 2‐nitrotoluene, 3‐nitrotoluene and 1,2,4‐trichlorobenzene). The coating was uniform and showed cauliflower‐like microstructure. It had high thermal stability (up to 375°C) and could be used for at least 180 times of solid‐phase microextraction without a decrease in extraction performance. Furthermore, it presented high extraction capacity for the benzenes due to the hydrophobic effect and π–π interaction between the analytes and the coating. Under optimized extraction conditions, good linearity (correlation coefficients higher than 0.9946), wide linear range (0.01–50 μg/L), and low limits of detection (5.25–12.5 ng/L) were achieved for these analytes. The relative standard deviation was lower than 5.7% for five successive measurements with one fiber, and the relative standard deviation for fiber‐to‐fiber was 4.9–6.8% (n = 5). The solid‐phase microextraction and gas chromatography method was successfully applied for the determination of three real samples, and the recoveries for standards added were 89.6–106% for nail polish, 85.8–110% for hair dye, and 90–106.2% for correction fluid, respectively.     

Mesoporous titanium oxide with high‐specific surface area as a coating for in‐tube solid‐phase microextraction combined with high‐performance liquid chromatography for the analysis of polycyclic aromatic hydrocarbons

Stainless‐steel wires coated with mesoporous titanium oxide were placed into a polyether ether ketone tube for in‐tube solid‐phase microextraction, and the coating sorbent was characterized by X‐ray diffraction and scanning electron microscopy. It was combined with high‐performance liquid chromatography to build an online system. Using eight polycyclic aromatic hydrocarbons as the analytes, some conditions including sample flow rate, sample volume, organic solvent content, and desorption time were investigated. Under optimum conditions, an online analysis method was established and provided good linearity (0.03–30 μg/L), low detection limits (0.01–0.10 μg/L), and high enrichment factors (77.6–678). The method was applied to determine target analytes in river water and water sample of coal ash, and the recoveries are in the range of 80.6–106.6 and 80.9–103.5%, respectively. Compared with estrogens and plasticizers, extraction coating shows better extraction efficiency for polycyclic aromatic hydrocarbons.     

A novel series of M(II) complexes of 6‐methylpyridine‐2‐carboxylic acid with 4(5)methylimidazole: Synthesis,crystal structures, α‐glucosidase activity,density functional theory calculations and molecular docking

Novel complexes of 6‐methylpyridine‐2‐carboxylic acid and 4(5)methylimidazole, namely [Mn(6‐mpa)₂(4(5)MeI)₂] ( 1 ), [Zn(6‐mpa)₂(4(5)MeI)₂] ( 2 ), [Cd(6‐mpa)₂(4(5)MeI)₂] ( 3 ), [Co(6‐mpa)₂(4(5)MeI)₂] ( 4 ), [Ni(6‐mpa)₂(4(5)MeI)(OAc)] ( 5 ) and [Cu(6‐mpa)₂(4(5)MeI)] ( 6 ), were synthesized for the first time. The structures of complexes 1 – 4 and complexes 5 and 6 were determined using X‐ray diffraction and mass spectrometric techniques, respectively. The experimental spectral analyses for these complexes were performed using Fourier transform infrared and UV–visible techniques. The α‐glucosidase inhibition activity values (IC₅₀) of complexes 1 – 6 were identified in view of genistein reference compound. Moreover, the DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level was used to obtain optimal molecular geometry and vibrational wavenumbers for complexes 1 – 6 . Electronic spectral behaviours and major contributions to the electronic transitions were investigated using TD‐DFT/HSEh1PBE/6‐311G(d,p)/LanL2DZ level with conductor‐like polarizable continuum model and SWizard program. Finally, in order to investigate interactions between the synthesized complexes ( 1 – 6 ) and target protein (template structure S. cerevisiae isomaltase), a molecular docking study was carried out.     

Determination of ultraviolet filter compounds in environmental water samples using membrane‐protected micro‐solid‐phase extraction

A method based on membrane‐protected micro‐solid‐phase extraction coupled with gas chromatography and mass spectrometry was developed for the determination of six ultraviolet filter compounds in various aqueous media. Multiwalled carbon nanotubes as the sorbent were encapsulated in a sealed polypropylene membrane packet and immersed in the sample to extract the analytes, and then dichloromethane was used for desorption purpose. The method was sensitive enough for quantitative analysis of the target analytes, with limits of quantification between 0.01 and 0.06 μg/L, and produced a linear response (R² > 0.991) over the calibration range (0.05–6 μg/L). The obtained reproducibility was practically suitable with relative standard deviation values of less than 14% in pure water (spiked at 0.20/μg L) and less than 15% in real samples. The optimized method was applied for the analysis of real water samples with varying matrix complexity: tap, river, and dam water; geothermal spa; and sewage treatment plant effluent. Various levels and patterns of contamination were observed in the examined samples, while the sample from spa was the most contaminated, regarding the target analytes. Matrix spikes and matrix spike replicates were also analyzed to validate the technique for analysis of real aqueous samples, and satisfactory results were achieved.     

Separation and determination of polyurethane amine catalysts in polyether polyols by using UHPLC–Q‐TOF‐MS on a reversed‐phase/cation‐exchange mixed‐mode column

A simple, selective, and accurate ultra‐high performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry method was established and validated for the efficient separation and quantification of polyurethane amine catalysts in polyether polyols. Amine catalysts were primarily separated in polyether polyol‐based sample by solid‐phase extraction, and further baseline separated on a reversed‐phase/cation‐exchange mixed‐mode column (SiELC Primesep™ 200) using 0.1% trifluoroacetic acid/acetonitrile as a mobile phase in gradient elution mode at a flow rate of 0.2 mL/min. High‐resolution quadrupole time‐of‐flight mass spectrometry analysis in electrospray ionization positive mode allowed the identification as N,N′‐bis[3‐(dimethylamino)propyl]urea, N‐[2‐(2‐dimethylaminoethoxy)ethyl]‐N‐methyl‐1,3‐propanediamine, and N,N,N′,N′‐tetramethyldipropylenetriamine. The method was validated and presented good linearity for all the analytes in blank matrices within the concentration range of 0.20–5.0 or 0.1–2.0 μg/mL with the correlation coefficients (R²) ranging from 0.986 to 0.997. Method recovery ranged within 81–105% at all three levels (80, 100, and 120% of the original amount) with relative standard deviations of 1.0–6.2%. The limits of detection were in the range of 0.007–0.051 μg/mL. Good precision was obtained with relative standard deviation below 3.2 and 0.72% for peak area and retention time of three amines, respectively.     

Ionic liquid chemically bonded basalt fibers for in‐tube solid‐phase microextraction

Ionic liquids have been widely used in different fields by advantage of their specific properties. In this work, 1‐methyl‐3‐(3‐trimethoxysilyl propyl)imidazolium chloride was prepared and chemically bonded onto basalt fibers for in‐tube solid‐phase microextraction. Through combining in‐tube extraction device with high‐performance liquid chromatography equipped with a diode array detector, an online enrichment and analysis method for eight polycyclic aromatic hydrocarbons was established under the optimum conditions. A good enrichment factor (52–814), good linearity (0.10–15 and 0.20–15 μg/L), low limits of detection (0.03–0.05 μg/L), and low limits of quantitation (0.10–0.20 μg/L) were achieved using a sample volume of 50 mL. Analysis method was applied to the real samples including the groundwater and wastewater from a chemical industry park, some target analytes were detected and the relative recoveries were in the range of 80.4–116.8%.     

Analysis of retinol, α‐tocopherol, 25‐hydroxyvitamin D2 and 25‐hydroxyvitamin D3 in plasma of patients with cardiovascular disease by HPLC–MS/MS method

Fat‐soluble vitamins play a pivotal role in the progression of atherosclerosis and the development of cardiovascular disease. Therefore, plasma monitoring of their concentrations may be useful in the diagnosis of these disorders as well as in the process of treatment. The study aimed to develop and validate an HPLC–MS/MS method for determination of retinol, α‐tocopherol, 25‐hydroxyvitamin D2 and 25‐hydroxyvitamin D3 in plasma of patients with cardiovascular disease. The analytes were separated on an HPLC Kinetex F5 column via gradient elution with water and methanol, both containing 0.1% (v/v) formic acid. Detection of the analytes was performed on a triple‐quadrupole MS with multiple reaction monitoring via electrospray ionization. The analytes were isolated from plasma samples with liquid–liquid extraction using hexane. Linearity of the analyte calibration curves was confirmed in the ranges 0.02–2 μg/mL for retinol, 0.5–20 μg/mL for α‐tocopherol, 5–100 ng/mL for 25‐hydroxyvitamin D2 and 2–100 ng/mL for 25‐hydroxyvitamin D3. Intra‐ and inter‐assay precision and accuracy of the method were satisfactory. Short‐ and long‐term stabilities of the analytes were determined. The HPLC‐MS/MS method was applied for the determination of the above fat‐soluble vitamin concentrations in patient plasma as potential markers of the cardiovascular disease progression.