Polymer Nanocontainers for Intracellular Delivery

Carriers for intracellular delivery are required to overcome limitations of therapeutic agents such as low specificity, systemic toxicity, high clearance rate, and low therapeutic index. Nanocontainers comprised of an aqueous core and a polymer shell have received increasing attention because they readily combine stimuli response to improve intracellular payload release and surface modification to enhance selectivity towards the desired region of action. This Minireview summarizes the design and properties of polymer nanocontainers for intracellular delivery, classified according to the polymer architecture.     

聚合物纳米容器的研究进展

聚合物纳米容器由于具有许多潜在的用途和优势,近年来为许多研究小组关注.本文简要概述了高稳定性聚合物纳米容器的制备技术和智能型聚合物纳米容器的释放途径及机理。     

Isoniazid@Fe2O3 Nanocontainers and Their Antibacterial Effect on Tuberculosis Mycobacteria

Isoniazid‐filled Fe₂O₃ hollow nanospheres (INH@Fe₂O₃, diameter <30 nm, 48 wt % INH‐load) are prepared for the first time and suggested for tuberculosis therapy. After dextran‐functionalization, the INH@Fe₂O₃@DEX nanocontainers show strong activity against Mycobacterium tuberculosis (M.tb.) and M.tb.‐infected macrophages. The nanocontainers can be considered as “Trojan horses” and show efficient, active uptake into both M.tb.‐infected macrophages and even into mycobacterial cells.     

A Self‐Assembly Approach to Temperature‐Responsive Polymer Nanocontainers

Summary: Thermosensitive polymer nanocontainers were formed by self‐assembly of diblock copolymers poly(2‐cinnamoylethyl methacrylate)‐block‐poly(N‐isopropylacrylamide) (PCEMA‐block‐PNIPAM) and subsequent photo‐crosslinking of the PCEMA shells. It was found that the diameter of the nanocontainers ranges from tens of nanometers to thousands of nanometers, depending on the self‐assembly conditions. The phase transition of the nanocontainers takes place at 32 °C; the structural changes are reversible in a heating and cooling cycle.

Schematic illustration of the structural transition behavior of the thermosensitive polymer nanocontainers.     

Cyclodextrin‐Modified Zeolites: Host–Guest Surface Chemistry for the Construction of Multifunctional Nanocontainers

The functionalization of nanoporous zeolite L crystals with β‐cyclodextrin (CD) has been demonstrated. The zeolite surface was first modified with amino groups by using two different aminoalkoxysilanes. Then, 1,4‐phenylene diisothiocyanate was reacted with the amino monolayer and used to bind CD heptamine by using its remaining isothiocyanate groups. The use of the different aminoalkoxysilanes, 3‐aminopropyl dimethylethoxysilane (APDMES) and 3‐aminopropyl triethoxysilane (APTES), led to drastic differences in uptake and release properties. Thionine was found to be absorbed and released from amino‐ and CD‐functionalized zeolites when APDMES was used, whereas functionalization by APTES led to complete blockage of the zeolite channels. Fluorescence microscopy showed that the CD groups covalently attached to the zeolite crystals could bind adamantyl‐modified dyes in a specific and reversible manner. This strategy allowed the specific immobilization of His‐tagged proteins by using combined host–guest and His‐tag‐Ni‐nitrilotriacetic acid (NTA) coordination chemistry. Such multifunctional systems have the potential for encapsulation of drug molecules inside the zeolite pores and non‐covalent attachment of other (for example, targeting) ligand molecules on its surface.     

Graphene Nanoplatelets: Electrochemical Properties and Applications for Oxidation of Endocrine‐Disrupting Chemicals

In most graphene‐based electrochemical applications, graphene nanoplatelets (GNPs) have been applied. Now, for the first time, electrochemical properties of GNPs, namely, its electrochemical activity, potential window, and double‐layer capacitance, have been investigated. These properties are compared with those of carbon nanotubes (CNTs). GNP‐ and CNT‐coated electrodes were then applied for electrochemical oxidation of endocrine‐disrupting chemicals. The GNP‐coated electrode was characterized by atomic force microscopy and electrochemical techniques. Compared with the CNT‐coated electrode, higher peak current for the oxidation of 4‐nonylphenol is achieved on the GNP‐coated electrode, together with lower capacitive current. Electrochemical oxidation of 2,4‐dichlorophenol, bisphenol A, and octylphenol in the absence or presence of 4‐nonylphenol was studied on the GNP‐coated electrode. The results suggest that GNPs have better electrochemical performance than CNTs and are thus more promising for electrochemical applications, for example, electrochemical detection and removal of endocrine‐disrupting chemicals.     

Synthesis,Optical Properties,and Sensing Applications of Gold Nanodots

In this Personal Account, we briefly address our journey in developing photoluminescent nanomaterials for sensing purposes, with a focus on gold nanodots (Au NDs). Their synthetic strategies, optical properties, and sensing applications are emphasized. The Au NDs can be simply prepared from the etching of small‐sized Au nanoparticles (<3 nm in diameter) by thiol compounds such as 11‐mercaptoundecanoic acid under alkaline conditions. This simple approach allows the preparation of various functional Au NDs by choosing different thiol compounds as etching agents. Since the optical properties of Au NDs are highly dependent on the core and shell of each Au ND, the selection of etching reagents is important. Over the years we have developed various sensing systems using Au NDs for the detection of metal ions, anions, and proteins, based on analyte‐induced photoluminescence quenching/enhancement of Au NDs as a result of changes in their oxidation state, shell composition, and structure.     

碳纳米管在分析化学中的应用

综述了碳纳米管在分析化学中应用的新的进展。主要讨论了碳纳米管在扫描显微镜探针针尖、气体传感器、化学修饰电极和化学分离与检测等方面的应用。     

金纳米通道的研究及其在分析化学中的应用

微纳尺度的研究是微纳米技术的重要组成部分。本文重点对金纳米通道的制备及其在分离分析、传感器等方面的研究和应用作了评述。展望了金纳米通道的应用前景。     

Hollow,pH-Sensitive Microgels as Nanocontainers for the Encapsulation of Proteins

Depending on their architectural and chemical design, microgels can selectively take up and release small molecules by changing the environmental properties, or capture and protect their cargo from the surrounding conditions. These outstanding properties make them promising candidates for use in biomedical applications as delivery or carrier systems. In this study, hollow anionic p(N-isopropylacrylamid-e-co-itaconic acid) microgels are synthesized and analyzed regarding their size, charge, and charge distribution. Furthermore, interactions between these microgels and the model protein cytochrome c are investigated as a function of pH. In this system, pH serves as a switch for the electrostatic interactions to alternate between no interaction, attraction, and repulsion. UV–vis spectroscopy is used to quantitatively study the encapsulation of cytochrome c and possible leakage. Additionally, fluorescence-lifetime images unravel the spatial distribution of the protein within the hollow microgels as a function of pH. These analyses show that cytochrome c mainly remains entrapped in the microgel, with pH controlling the localization of the protein – either in the microgel's cavity or in its network. This significantly differentiates these hollow microgels from microgels with similar chemical composition but without a solvent filled cavity.     

Applications of Macrocyclic Polyethers in Analytical Sensors and Ion Separation

Artificial macrocyclic polyethers were synthesized and applied as neutral carriers for ion-selective PVC membrane electrodes, ion-chromatographic packing materials, extractants and adsorbents for ion separation, coating materials for piezoeletrical membrane sensors for organic species, and ion-transport carriers through liquid membranes. Ion-selective electrodes such as those for K⁺ Na⁺, UO₂²⁺, Cs⁺, Pb²⁺, Fe³⁺, Hg²⁺ and Ag⁺ ions based on crown ether-phosphotungstic acid (PW) precipitates and dithio crown ethers respectively were prepared and showed good sensitivity and selectivity. Crown ether-PW precipitates were applied as adsorbents of rare-earth ions and some common heavy-metal ions. Some rare-earth ions were easily extracted with crown ethers, especially 15-crown-5. Poly(stytene/divinyl benzene) cryptand-22 resin was synthesized and applied as a bifunctional stationary phase of ion chromatography to separate bom cations and anions, even some organic carboxylate geometric isomers. Crown ethers such as mono-benzo-15-crown-5 was successfully applied as a coating material on piezoelectric quartz membrane sensors for some organic species. The oscillation frequency of the crown-ether quartz-membrane sensor was sensitive to organic vapours such as amines and alcohols. Upon adsorption of organic species on the crown-ether quartz membrane, the oscillation frequency of the sensor decreased obviously. Special crown ether such as dibenzo-16-crown-5-oxyacetic acid, decyl-cryptand-22 and 1, 4-dihydro-pyridine-18-crown-5 were synthesized and successfully applied as ion-transport carriers (ionophores) for transport of Na⁺ K⁺ and Mg²⁺ ions through liquid membranes.     

用于抗生素检测的纳米材料基电化学传感器研究进展

近年来,抗生素作为基本的治疗药物在医学、畜牧业、水产养殖业等方面被广泛应用,但其过量使用造成的抗生素残留问题也给生态环境、食品安全和人类健康造成严重的威胁.鉴于此,纳米电化学传感器在抗生素快速检测方面的研究成为热点,也取得了可观的进展.本文首先对抗生素进行了简单介绍,通过分析抗生素的电化学性质,综述了不同结构和类型的纳...     

Templateless assembly of molecularly aligned conductive polymer nanowires: a new approach for oriented nanostructures

Although oriented carbon nanotubes, oriented nanowires of metals, semiconductors and oxides have attracted wide attention, there have been few reports on oriented polymer nanostructures such as nanowires. In this paper we report the assembly of large arrays of oriented nanowires containing molecularly aligned conducting polymers (polyaniline) without using a porous membrane template to support the polymer. The uniform oriented nanowires were prepared through controlled nucleation and growth during a stepwise electrochemical deposition process in which a large number of nuclei were first deposited on the substrate using a large current density. After the initial nucleation, the current density was reduced stepwise in order to grow the oriented nanowires from the nucleation sites created in the first step. The usefulness of these new polymer structures is demonstrated with a chemical sensor device for H(2)O(2), the detection of which is widely investigated for biosensors. Finally, we demonstrated that controlled nucleation and growth is a general approach and has potential for growing oriented nanostructures of other materials.     

Biomimetic Ion Nanochannels as a Highly Selective Sequential Sensor for Zinc Ions Followed by Phosphate Anions

A novel biomimetic ion‐responsive multi‐nanochannel system is constructed by covalently immobilizing a metal‐chelating ligand, 2,2′‐dipicolylamine (DPA), in polyporous nanochannels prepared in a polymeric membrane. The DPA‐modified multi‐nanochannels show specific recognition of zinc ions over other common metal ions, and the zinc‐ion‐chelated nanochannels can be used as secondary sensors for HPO₄^2? anions. The immobilized DPA molecules act as specific‐receptor binding sites for zinc ions, which leads to the highly selective zinc‐ion response through monitoring of ionic current signatures. The chelated zinc ions can be used as secondary recognition elements for the capture of HPO₄^2? anions, thereby fabricating a sensing nanodevice for HPO₄^2? anions. The success of the DPA immobilization and ion‐responsive events is confirmed by measurement of the X‐ray photoelectron spectroscopy (XPS), contact angle (CA), and current–voltage (I–V) characteristics of the systems. The proposed nanochannel sensing devices display remarkable specificity, high sensitivity, and wide dynamic range. In addition, control experiments performed in complex matrices suggest that this sensing system has great potential applications in chemical sensing, biotechnology, and many other fields.     

Photoresponsive Cyclodextrin‐Covered Nanocontainers and Their Sol‐Gel Transition Induced by Molecular Recognition

Springing the trap : Cyclodextrin‐covered mesoporous silica nanoparticles with photocleavable linkers exhibit photoinduced release characteristics and a sol–gel transition that is induced by molecular recognition (see picture). Upon exposure to UV light, the guest molecules were released from the pore by removal of the CD “gatekeeper”, which was linked on the surface of the silica nanoparticle through a photocleavable o‐nitrobenzyl ester moiety.

     

仿衣壳结构的巨大中空超分子纳米容器的多组分自组装构筑及其功能

在自然界病毒衣壳及笼状蛋白质大分子结构的启发下,运用V型双齿桥连吡啶配体和具有平面四方构型的Pd²⁺离子的溶液配位自组装,一系列具有M_nL_2n经验分子式的多组分巨大中空“纳米容器”型超分子结构被成功构筑。通过在配体内外引入官能团的策略,可以简单地实现衣壳骨架结构的内外功能化。内功能化后的“纳米容器”具有特殊的高密度相,不仅可以实现对不同类型客体分子的包裹,而且可以作为“纳米反应器”实现尺寸均一可控纳米粒子的原位合成以及小分子的催化转化。外功能化的核壳结构则可以对寡肽、DNA等生物分子具有特定的识别作用。本文对此类“纳米容器”型超分子的设计原理、自组装合成与表征、以及功能化应用等方面进行了综述。     

可视化分析方法在薄膜基材料荧光传感中的应用

随着光学成像技术的不断突破,荧光可视化已经从简单的肉眼观察逐步向宽场显微、共聚焦显微、超分辨成像等方向发展.然而,荧光可视化在薄膜基材料中的传感应用依然以肉眼观察以及少量的宽场显微为主要分析手段.同时,薄膜基材料结构和性质的可视化分析研究也滞后于荧光可视化技术的发展.基于此,结合本课题组近几年的研究成果,本文系统评述了荧光共聚焦显微技术在薄膜基材料体相分散状态和表面性质的可视化分析中的应用进展,并对当前薄膜基荧光传感材料面临的问题和可能的解决方案进行了简要探讨.