Synthesis,Structures and Various Biological Applications of New Zn(II) Complexes Having Different Coordination Modes Controlled by the Drug Furosemide in Presence of Bioactive Nitrogen Based Ligands

Novel Zn(II) complexes with the general formula: [Zn(furo)₂(L)_n], n = 1 or 2, (furo = furosemide = (4‐chloro‐2‐(furan‐2‐ylmethylamino)‐5‐sulfamoylbenzoic acid) were prepared. The complexes [Zn(furo)₂(MeOH)₂] ( 1 ; MeOH = methanol), [Zn(furo)₂(2‐ampy)₂] ( 2 ; 2‐ampy = 2‐aminopyridine), [Zn(furo)₂(2‐ammepy)₂] ( 3 ; 2‐ammepy = 2‐aminomethylpyridine), [Zn(furo)₂(H₂O)(2,2‐bipy)] ( 4 ; 2,2′‐bipy = 2,2′‐bipyridine), [Zn(furo)₂(H₂O)(4,4′‐bipy)] ( 5 ; 4,4′‐bipy = 4,4′‐bipyridine), [Zn(furo)₂(1,10‐phen)] ( 6 ; 1,10‐phen = 1,10‐phenanthroline), [Zn(furo)₂(2,9‐dmp)] ( 7 ; 2,9‐dmp = 2,9‐dimethyl‐1,10‐phenanthroline), and [Zn (furo)₂(quin)₂] ( 8 ; quin = quinoline) were synthesized and characterized using different techniques such as IR, UV–Vis, ¹H NMR, ¹³C NMR, LC/MS and others. The crystal structure of complex ( 4 ) was determined using single‐crystal X‐ray diffraction. The anti‐bacterial activity of complexes ( 1 – 8 ) was tested using agar diffusion method against three gram‐positive (Staphylococcus aureus, Bacillus subtilis and Staphylococcus epidermidis) and three gram‐negative bacteria (Escherichia coli, Proteus mirabilis, Pseudomonas aeruginosa). The obtained results showed different Inhibition Zone Diameters (IZD) with various anti‐bacterial activities against the selected gram‐positive and gram‐negative bacteria. In addition, the rate of bis‐(4‐nitrophenyl) phosphate hydrolysis was measured at different temperatures, different pH values and different concentrations. The rates for the eight complexes were in the following order: complex 4 > 2 > 5 > 8  >  7  >  6  >  3  >  1 .     

Development and validation of an LC‐MS/MS method for the determination of a novel thienoquinolin urea transporter inhibitor PU‐48 in rat plasma and its application to a pharmacokinetic study

A specific, sensitive and stable high‐performance liquid chromatographic–tandem mass spectrometry (LC‐MS/MS) method was developed and validated for the quantitative determination of methyl 3‐amino‐6‐methoxythieno [2,3‐b]quinoline‐2‐carboxylate (PU‐48), a novel diuretic thienoquinolin urea transporter inhibitor in rat plasma. In this method, the chromatographic separation of PU‐48 was achieved with a reversed‐phase C₁₈ column (100 × 2.1 mm, 3 μm) at 35°C. The mobile phase consisted of acetonitrile and water with 0.05% formic acid added with a gradient elution at flow rate of 0.3 mL/min. Samples were detected with the triple‐quadrupole tandem mass spectrometer with multiple reaction monitoring mode via electrospray ionization source in positive mode. The retention time were 6.2 min for PU‐48 and 7.2 min for megestrol acetate (internal standard, IS). The monitored ion transitions were mass‐to‐charge ratio (m/z) 289.1 → 229.2 for PU‐48 and m/z 385.3 → 267.1 for the internal standard. The calibration curve for PU‐48 was linear over the concentration range of 0.1–1000 ng/mL (r² > 0.99), and the lower limit of quantitation was 0.1 ng/mL. The precision, accuracy and stability of the method were validated adequately. The developed and validated method was successfully applied to the pharmacokinetic study of PU‐48 in rats.     

Simultaneous quantification of five major constituents in stems of Dracaena plants and related medicinal preparations from China and Vietnam by HPLC–DAD

A high‐performance liquid chromatographic (HPLC) method was developed for the simultaneous quantification of five major bioactive constituents in the stems of resiniferous Dracaena plants from China and Vietnam, as well as those in the related traditional Chinese medicinal preparations. A diode array detector with the wavelength of 330 nm was used to monitor resveratrol, 7,4′‐dihydroxyflavone and pterostilbene, while loureirin A and loureirin B were monitored at 280 nm. The five constituents were separated on an Agela SB C₁₈ column by gradient elution using 0.008% (v/v) formic acid solution (A) and acetonitrile (B) as the mobile phase. The validation of the method included recovery, linearity, accuracy and precision (intra‐ and inter‐day variation). The range of recoveries of this method was 98.1–104.9%, with all the constituents showing good linearity (r² > 0.9999). The accuracy and precision were satisfactory, with the overall intra‐ and inter‐day variation being less than 4%. The present method has been successfully applied for the determination of all five constituents in 21 related herbal samples including 10 D. cochinchinensis stem samples, seven D. cambodiana stem samples and four purchased medicinal preparations. The contents of these constituents were analyzed using principal component analysis, which can efficiently identify raw herb of Dracaena from different sources. The study may be considered helpful to the quality control of Dracena plants and its medicinal preparations. Copyright © 2009 John Wiley & Sons, Ltd.     

Two polydimethylsiloxane rod extraction methods for the sensitive determination of phenolic compounds in water samples

Simple, precise, and low‐cost methods for the simultaneous determination of phenolic endocrine disrupting compounds such as bisphenol A, trichlorophenol, pentachlorophenol, 4‐nonylphenol, and 4‐octylphenol in water samples were developed. The Direct, in situ derivatization methods are based on polydimethylsiloxane rod extraction followed by liquid desorption and chromatographic analysis by liquid chromatography and diode array detection. Several parameters affecting the extraction and desorption of the phenolic compounds and their acetylated derivates were studied, as well as the chromatographic and detection conditions. For the direct method, determination coefficients (r²) > 0.990 and LODs in the 0.6–2 μg/L range were obtained for all compounds except bisphenol A (9.5 μg/L). With the derivatization‐based method, based on in situ acetylation, lower limits of detection (0.3–0.9 μg/L) were obtained for all the compounds with r² > 0.988 and RSDs in the 2–9% range. The developed methods were applied to the analysis of spiked water samples obtaining recoveries of between 60.2 and 131.7% for the direct method, and of between 76.6 and 108.2% for the derivatization‐based method. The results demonstrate the feasibility of using these two methods for determining bisphenol A, trichlorophenol, pentachlorophenol, 4‐nonylphenol, and 4‐octylphenol in water.     

Determination of total retronecine esters‐type hepatotoxic pyrrolizidine alkaloids in plant materials by pre‐column derivatization high‐performance liquid chromatography

A pre‐column derivatization high‐performance liquid chromatography method with diode array detection was developed and validated to determine the total retronecine esters‐type hepatotoxic pyrrolizidine alkaloids (RET‐HPAs) in herbs. The RET‐HPAs reacted with o‐chloranil in methanolic solution heated for 3 h, and an oxidative derivative was produced that could be detected at a maximal absorption of 223 nm. The analysis was performed using a C₁₈ column with an isocratic elution of methanol and aqueous 0.01% triethylamine (adjusted to pH 4 with formic acid), and the detection was carried out with DAD at 223 nm. The validation of the method included linearity, sensitivity, recovery and stability. It showed a good linear regression (r² > 0.9900) in the range of 2.5–250 µm with a limit of detection (S/N = 3) of 0.5 µm . The method provided desirable repeatability with overall intra‐ and inter‐day variations of less than 4.6%. The obtained recoveries for both of the extraction and derivatization process were between 94.6 and 100.7% (n = 3). Copyright © 2009 John Wiley & Sons, Ltd.     

Validated high-performance thin-layer chromatographic method for quantification of gallic acid and ellagic acid in fruits of Terminalia chebula,Phyllanthus emblica,and Quercus infectoria

A simple and rapid high-performance thin-layer chromatographic method for quantification of gallic acid and ellagic acid in dried fruits of Terminalia chebula, Phyllanthus emblica, and Quercus infectoria has been developed. The chromatographic development was carried out on precoated silica gel 60 F₂₅₄ plates in a mixture of toluene:ethyl acetate:chloroform:formic acid (4:8:1:3 v/v/v/v). The plate was scanned densitometrically at a wavelength of 280 nm. The retention factor value of gallic acid and ellagic acid was found to be 0.63 ± 0.2 and 0.53 ± 0.1, respectively. The developed method was validated in terms of linearity, precision, accuracy, sensitivity, robustness, specificity and stability as per the international conference of harmonization guidelines. The method showed good linear relationship over a range of 100–600 ng/band (gallic acid) and 100–500 ng/band (ellagic acid) with a regression coefficient (r²) of 0.997 (gallic acid) and 0.996 (ellagic acid). The method showed high accuracy (99.65%–100.85%). The percentage relative standard deviation of intra-day and inter-day precision studies was not more than 2%. The method is highly robust and has displayed high specificity. The developed method is new, simple, and accurate and can be successfully employed in routine analysis of raw materials and formulations containing gallic acid and ellagic acid.     

Development and Validation of a Stability-Indicating LC Method for Determination of Ebastine in Tablet and Syrup

A simple stability-indicating reversed-phase liquid chromatographic method with diode-array detection was developed and validated for the quantitative determination of ebastine in tablets and syrup. The LC method was carried out on a C₁₈ column with acetonitrile:phosphoric acid 0.1% pH 3.0 (55:45, v/v) as mobile phase, at a flow rate of 1.2 mL min⁻¹. Ultraviolet detection of ebastine was at 254 nm. A linear response (r = 0.9999) was observed in the range of 10–80 μg mL⁻¹. The RSD values for intra- and inter-day precision studies showed good results (RSD < 2%) and accuracy was greater than 98%. Validation parameters such as specificity and robustness were also determined. The method was found to be stability-indicating and can be applied to quantitative determination of ebastine in tablets and syrup.     

Auxilary Ligand Directed Zinc(II) Metal‐Organic Frameworks with Different Topological Networks

By altering auxiliary N‐donor ligands, two Zn^II compounds, [Zn₃(HL)₂(4,4′‐bipy)₃]_n ( 1 ) and [Zn₄(L)₂(bpp)]_n ( 2 ) (H₄L = 3‐(2′,4′‐dicarboxylphenoxy)phthalic acid, 4,4′‐bipy = 4,4′‐bipyridine, and bpp = 1,3‐bis(4‐pyridyl)propane), were obtained under hydrothermal conditions. Structural analyses revealed that compound 1 features a trinodal (3,4,4)‐connected 3D topological framework, and compound 2 displays a (3,8)‐connected 3D pillar‐layered framework with a tfz‐d topology. Furthermore, the thermal stabilities and the luminescent properties of compounds 1 and 2 were investigated.     

Hollow fiber stir bar sorptive extraction for determination of phthalic acid esters in environmental and biological matrices

The purpose of this paper is to introduce a novel hollow fiber stir bar sorptive extraction for collecting and determining of phthalic acid esters in environmental and biological matrices. Shell–core ZrO₂/SiO₂ composite microspheres and porous C₁₈ silica microspheres were compared as the sorbents, which were loaded in the lumen of a microporous hollow fiber membrane. A thin stainless‐steel wire was also inside of the hollow fiber membrane acting as the magnetic stirrer, thus affording the procedures like stir bar sorptive extraction to perform the active trapping of the analytes. Variables affecting the extraction (salt addition and pH of samples, extraction temperature, and time) and desorption (microwave time and eluted solvents) have been optimized. Under the optimal conditions, good linearity (r > 0.9968) of all calibration curves was obtained in validation experiments. And the limits of quantification ranged from 0.01 to 1000 ng/mL. The recoveries in different matrices were in the range of 64.90–112.60% with relative standard deviations less than 8.60%. The present work demonstrated the applicability of the developed method for the determination of phthalic acid esters in environmental and biological sample, allowing the selective extraction of phthalate esters in complex samples with low consumption of organic solvents and no sample clean‐up.     

Simultaneous determination of seven phthalic acid esters in beverages using ultrasound and vortex‐assisted dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

A sensitive, rapid, and simple high‐performance liquid chromatography with UV detection method was developed for the simultaneous determination of seven phthalic acid esters (dimethyl phthalate, dipropyl phthalate, di‐n‐butyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate, di‐(2‐ethylhexyl) phthalate, and di‐n‐octyl phthalate) in several kinds of beverage samples. Ultrasound and vortex‐assisted dispersive liquid–liquid microextraction method was used. The separation was performed using an Intersil ODS‐3 column (C₁₈, 250 × 4.6 mm, 5.0 μm) and a gradient elution with a mobile phase consisting of MeOH/ACN (50:50) and 0.2 M KH₂PO₄ buffer. Analytes were detected by a UV detector at 230 nm. The developed method was validated in terms of linearity, limit of detection, limit of quantification, repeatability, accuracy, and recovery. Calibration equations and correlation coefficients (> 0.99) were calculated by least squares method with weighting factor. The limit of detection and quantification were in the range of 0.019–0.208 and 0.072–0.483 μg/L. The repeatability and intermediate precision were determined in terms of relative standard deviation to be within 0.03–3.93 and 0.02–4.74%, respectively. The accuracy was found to be in the range of –14.55 to 15.57% in terms of relative error. Seventeen different beverage samples in plastic bottles were successfully analyzed, and ten of them were found to be contaminated by different phthalic acid esters.     

Development of a novel RP‐HPLC method for the efficient separation of aripiprazole and its nine impurities

The development of an RP‐HPLC method for the separation of aripiprazole and its nine impurities was performed with the use of partial least squares regression, response surface plot methodology, and chromatographic response function. The HPLC retention times and computed molecular parameters of the aripiprazole and its nine impurities were further used for the quantitative structure–retention relationship (QSRR) study. The QSRR model, R²: 0.899, Q²: 0.832, root mean square error of estimation: 4.761, root mean square error of prediction: 6.614, was developed. Very good agreement between the predicted and observed retention times (t_R) for three additional aripiprazole impurities (TC1–TC3) indicated the high prediction potential of the QSRR model for t_R evaluation of other aripiprazole impurities and metabolites. The developed HPLC method is the first reported method for the efficient separation of aripiprazole and its nine impurities, which could be used for the analysis of an additional three aripiprazole impurities (TC1–TC3).     

Use of Ionic liquids as additives in ion exchange chromatography for the analysis of cations

The behavior of acids (citric acid, nitric acid, oxalic acid, tartaric acid) as a mobile phase and imidazolium ionic liquids (the bromides, tetrafluoroborates and hexafluorophosphates of 1‐ethyl, 1‐butyl, and 1‐hexyl‐3‐methylimidazolium) as additives in ion exchange chromatography for cations (Na⁺, K⁺, Mg²⁺, Ca²⁺) separation were studied. The results showed that nitric acid and 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate offered the most interesting features in the separation of cations, such as lower retention time and better resolution. The selected optimal conditions were achieved by adding 0.10 mM 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate in 4.0 mM HNO₃ mobile phase for the separation of four cations with the flow rate of 0.9 mL/min at room temperature (25°C). The linear regression equations of Na⁺, K⁺, Mg²⁺, Ca²⁺ were S  = 4.4763c  + 0.0209, S  = 3.8903c  – 0.0087, S  = 6.3974c  – 0.0173, and S  = 7.601c  – 0.0339 and the limits of detection of Na⁺, K⁺, Mg²⁺, Ca²⁺ were 0.296, 4.98, 0.0970, and 1.22 μg/L, respectively. In this work, four cations in samples were successfully detected.     

The Substitution Reactions of the Small Biomolecules and Dinuclear Pt(II) Complexes with Alkanediamine Linker

The substitution reactions of the complexes [{trans‐Pt(NH₃)₂H₂O}₂(μ‐1,4‐diaminobutane)]⁴⁺ ( I ), [{trans‐Pt(NH₃)₂H₂O}₂(μ‐1,6‐diaminohexane)]⁴⁺ ( II ), and [{trans‐Pt(NH₃)₂H2O}₂(μ‐1,8‐diaminooctane)]⁴⁺ ( III ), with nucleophiles L‐cysteine (L‐Cys), glutathione (GSH), guanosine‐5′‐monophosphate (5′‐GMP), L‐histidine (L‐His), and pyridine were studied in 0.1 M NaClO₄ aqueous solutions at pH = 2.5. The substitutions were studied under pseudo‐first‐order conditions as a function of concentration and temperature using UV–vis spectrophotometry. At three different temperatures (288, 298, and 308 K) the reactions of the II and III complexes and 5′‐GMP were studied. The order of reactivity of study ligands is L‐Cys > GSH > 5′‐GMP > L‐His > pyridine and the order of reactivity of the complexes is I < II ≈ III . The obtained results indicate that the structure of the alkanediamine linker in the dinuclear Pt(II) complexes controls the substitution process. The negative values reported for entropy of activation confirmed the associative substitution mode. These results are discussed in order to find the connection between structure and reactivity of the dinuclear Pt(II) complexes.     

On‐line 2D‐LC‐ESI/MS/MS determination of rifaximin in rat serum

A highly sensitive and selective on‐line two‐dimensional reversed‐phase liquid chromatography/electrospray ionization–tandem mass spectrometry (2D‐LC‐ESI/MS/MS) method was developed and validated to determine rifaximin in rat serum by direct injection. The 2D‐LC‐ESI/MS/MS system consisted of a restricted access media column for trapping proteins as the first dimension and a Waters C₁₈ column as second dimension using 0.1% aqueous acetic acid:acetonitrile as mobile phase in a gradient elution mode. Rifampacin was used as an internal standard. The linear dynamic range was 0.5–10 ng/mL (r² > 0.998). Acceptable precision and accuracy were obtained over the calibration range. The assay was successfully used in analysis of rat serum to support pharmacokinetic studies. Copyright © 2009 John Wiley & Sons, Ltd.     

Cobalt‐based metal coordination polymers with 4,4′‐bipyridinyl groups: highly efficient catalysis for one‐pot synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions

Three new metal coordination complexes, namely [Co(BPY)₂(H₂O)₂](BPY)(BS)₂(H₂O)₄ ( 1 ), [Co(BPY)₂(H₂O)₄](ABS)₂(H₂O)₂ ( 2 ) and [Co(BPY)(H₂O)₄](MBS)₂ ( 3 ) (BPY = 4,4′‐bipyridine, BS = phenylsulfonic acid, ABS = p‐aminobenzenesulfonic acid, MBS = p‐methylbenzenesulfonic acid), were obtained under hydrothermal conditions. Complexes 1 , 2 , 3 were structurally characterized using single‐crystal X‐ray diffraction and infrared spectroscopy. All of them display low‐dimensional motifs: complex 1 displays a two‐dimensional structure; and complexes 2 and 3 exhibit a one‐dimensional tape structure. Through strong intermolecular hydrogen bonding interactions and weak packing interactions, all of them further stack to generate a three‐dimensional supramolecular architecture. Catalysts 1 , 2 , 3 were involved in the green synthesis of a variety of 3,4‐dihydropyrimidin‐2(1H)‐ones under solvent‐free conditions through Biginelli reactions. The corresponding catalytic product was obtained in quantitative yields (99%) under eco‐friendly synthesis conditions for the variety of reactions. Catalysts 1 , 2 , 3 exhibit excellent efficiency for the desired product, and their catalytic performance shows the following order: 2  >  1  ≈  3 , which can be ascribed to the hydrophobic interactions of different phenylsulfonate groups. The catalytic performance for the Biginelli reaction is not only dependent on the selected solvents, but also inversely proportional to the polarities of the solvents. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrophilicity Control of Visible‐Light Hydrogen Evolution and Dynamics of the Charge‐Separated State in Dye/TiO2/Pt Hybrid Systems

Visible‐light‐driven H₂ evolution based on Dye/TiO₂/Pt hybrid photocatalysts was investigated for a series of (E)‐3‐(5′‐{4‐[bis(4‐R¹‐phenyl)amino]phenyl}‐4,4′‐(R²)₂‐2,2′‐bithiophen‐5‐yl)‐2‐cyanoacrylic acid dyes. Efficiencies of hydrogen evolution from aqueous suspensions in the presence of ethylenediaminetetraacetic acid as electron donor under illumination at λ>420 nm were found to considerably depend on the hydrophilic character of R¹, varying in the order MOD (R¹=CH₃OCH₂, R²=H)≈ MO4D (R¹=R²=CH₃OCH₂)> HD (R¹=R²=H)> PD (R¹=C₃H₇, R²=H). In the case of MOD /TiO₂/Pt, the apparent quantum yield for photocatalyzed H₂ generation at 436 nm was 0.27±0.03. Transient absorption measurements for MOD ‐ or PD ‐grafted transparent films of TiO₂ nanoparticles dipped into water at pH 3 commonly revealed ultrafast formation (<100 fs) of the dye radical cation (Dye^.+) followed by multicomponent decays, which involve minor fast decays (<5 ps) almost independent of R¹ and major slower decays with significant differences between the two samples: 1) the early decay of the major components for MOD is about 2.5 times slower than that for PD and 2) a redshift of the spectrum occurred for MOD with a time constant of 17 ps, but not for PD . The substituent effects on H₂ generation as well as on transient behavior have been discussed in terms substituent‐dependent charge recombination (CR) of Dye^.+ with electrons in bulk, inner‐trap, and/or interstitial‐trap states, arising from different solvent reorganization.     

Effects of mixed aqueous‐organic solvents on the rate of intramolecular carboxylic group‐catalyzed cleavage of N‐(4′‐methoxyphenyl)phthalamic acid

Kinetic study on the cleavage of N‐(4′‐methoxyphenyl)phthalamic acid (NMPPAH) in mixed H₂O‐CH₃CN and H₂O‐1,4‐dioxan solvents containing 0.05 M HCl reveals the formation of phthalic anhydride (PAn)/phthalic acid (PA) as the sole or major product. Pseudo first‐order rate constants (k₁) for the conversion of NMPPAH to PAn decrease nonlinearly from 60.4 × 10^?5 to 2.64 × 10^?5 s^?1 with the increase in the contents of 1,4‐dioxan from 10 to 80% v/v in mixed aqueous solvents. The rate of cleavage of NMPPAH in mixed H₂O‐CH₃CN solvents at ≥50% v/v CH₃CN follows an irreversible consecutive reaction path: NMPPAH PA. The values of k₁ are larger in H₂O‐CH₃CN than in H₂O‐1,4‐dioxan solvents. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 316–325, 2004     

Modeling the retention mechanism for high‐performance liquid chromatography with a chiral ligand mobile phase and enantioseparation of mandelic acid derivatives

The chromatographic retention mechanism describing relationship between retention factor and concentration of Cu²⁺(l ‐phenylalanine)₂ using chiral ligand mobile phase was investigated and eight mandelic acid derivatives were enantioseparated by chiral ligand exchange chromatography. The relationship between retention factor and concentration of the Cu²⁺(l ‐phenylalanine)₂ complex was proven to be in conformity with chromatographic retention mechanism in which chiral discrimination occurred both in mobile and stationary phase. Different copper(II) salts, chiral ligands, organic modifier, pH of aqueous phase, and conventional temperature on retention behavior were optimized. Eight racemates were successfully enantioseparated on a common reversed‐phase column with an optimized mobile phase composed of 6 mmol/L of l ‐phenylalanine or N,N‐dimethyl‐l ‐phenylalanine and 3 mmol/Lof copper(II) acetate or copper(II) sulfate aqueous solution and methanol.